Search
Search results for: codification
-
Tribo-Environment Dependent Chemical Modification of Sliding Interfaces in Ultrananocrystalline Diamond Nanowall Film: A Correlation with Friction and Wear
PublicationTribological properties of ultrananocrystalline diamond nanowall (UNCD NW) films were investigated quantitatively in three different and controlled tribo-environmental conditions, proposing the passivation and graphitization mechanisms. However, these mechanisms are rather complicated and possibly can be understood in well-controlled tribological conditions. It was shown that the friction and wear of these films were high in highPage 1...
-
Activated Carbon Modification towards Efficient Catalyst for High Value-Added Products Synthesis from Alpha-Pinene
Publication -
Evaluation of the Structural Modification of Ibuprofen on the Penetration Release of Ibuprofen from a Drug-in-Adhesive Matrix Type Transdermal Patch
Publication -
Modification of cellulosic filler with diisocyanates – volatile organic compounds emission assessment and stability of chemical structure over time
PublicationThis paper investigated the impact of type and content of diisocyanate on the structure of modified cellulose fillers. Four the most popular isocyanates were applied – isophorone, hexamethylene, toluene and methylene diphenyl diisocyanate – at loadings of 1–15 wt%. Chemical structure, and its short-term storage stability, were investigated for eight weeks. Moreover, the main volatile organic compounds detected during modification,...
-
Insights into modification of lignocellulosic fillers with isophorone diisocyanate: structure, thermal stability and volatile organic compounds emission assessment
PublicationThis study presents an analysis of the structure and properties of different types of lignocellulosic fillers modified by isophorone diisocyanate (IPDI) to provide insights into the possibility of their application to the manufacturing of wood polymer composites (WPCs). Moreover, it deals with the environmental aspects of modified fillers, by assessment of volatile organic compounds (VOCs) emitted during modification, as well as...
-
Modification of TiO2 nanotubes by graphene–strontium and cobalt molybdate perovskite for efficient hydrogen evolution reaction in acidic medium
PublicationHerein, we demonstrate that modification of TiO2 nanotubes with graphene–strontium and cobalt molybdate perovskite can turn them into active electrocatalysts for hydrogen evolution reaction (HER). For this purpose, a simple method of hydrothermal synthesis of perovskites was developed directly on the TiO2 nanotubes substrate. Moreover, the obtained hybrids were also decorated with graphene oxide (GO) during one-step hydrothermal...
-
Locally sculptured modification of the electrochemical response of conductive poly(lactic acid) 3D prints by femtosecond laser processing
PublicationThis manuscript presents an approach to sculpture high electrochemical activity of the 3D printed electrodes with poly(lactic acid) (PLA) matrix and carbon black (CB) filler by femtosecond laser (FSL) ablation. CB-PLA utility for electrochemical applications depends on a surface modification aiming to remove the PLA and uncover the conductive CB. We have discussed how laser pulse energy is critical for such an activation process....
-
Thermal dewetting as a method of surface modification of the gold thin films for surface plasmon resonance based sensor applications
PublicationHere, we report a quick and simple approach with low, optimized production costs to obtain surface plasmon resonance (SPR) based sensors fabricated through a time- and resource-effective method based on thermal dewetting of thin Au films. From the applicative point of view, the method of detection presented here should be easier to implement, since light transmission measurements seem to be much less challenging than light refractive...
-
Double-Layer Agar (DLA) Modifications for the First Step of the Phage-Antibiotic Synergy (PAS) Identification
Publication -
Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives
Publication -
Influence of diatomite and its base modifications on the self-adhesive properties of silicone pressure-sensitive adhesives
Publication -
Protective Effect of Black Tea Against Ethanol-Induced Oxidative Modifications of Liver Proteins and Lipids
Publication -
Mass spectrometry reveals the presence of specific set of epigenetic DNA modifications in the Norway spruce genome
Publication -
Chemical and Enzymatic Changes of Different Soils during Their Acidification to Adapt Them to the Cultivation of Highbush Blueberry
Publication -
Elucidating the impact of enzymatic modifications on the structure, properties, and applications of cellulose, chitosan, starch and their derivatives: a review
PublicationPolysaccharides, as one of the most prominent natural biopolymers, display numerous biological activities and industrial applications. Nevertheless, some polysaccharides lack biological properties or display weak biological activities. Besides, practical usages of polysaccharides still remain challenging because of their poor solubility and inappropriate hydrophilic/hydrophobic balance. Hence, enzymatic or chemical modifications...
-
Structure modification of acridine antitumor agents results in changes of enzymatic activity and gene expression of CYP3A4 isoenzyme in HepG2 cells.
PublicationEkspresja izoenzymu CYP3A4, który zaangażowany jest w metabolizm ok. 60% leków stosowanych klinicznie, może być modulowana przez takie czynniki jak: polimorfizm, czynniki transkrypcyjne oraz obecność ksenobiotyków. Przykładem induktorów genów kodujących izoenzym CYP3A4 jest fenobarbital i rifampicyna, których obecność w organizmie przyspiesza metabolizm innych leków stosowanych jednocześnie, które są substratami dla CYP3A4. Dlatego...
-
The Effect of Surface Modification of Ti13Zr13Nb Alloy on Adhesion of Antibiotic and Nanosilver-Loaded Bone Cement Coatings Dedicated for Application as Spacers
PublicationSpacers, in terms of instruments used in revision surgery for the local treatment of postoperative infection, are usually made of metal rod covered by antibiotic-loaded bone cement. One of the main limitations of this temporary implant is the debonding effect of metal–bone cement interface, leading to aseptic loosening. Material selection, as well as surface treatment, should be evaluated in order to minimize the risk of fraction...
-
Effect of hybrid modification by ceramic layer formation in MAO process and laser remelting on the structure of titanium bio-alloy Ti13Nb13Zr
PublicationTo improve the biological properties of titanium alloy Ti13Nb13Zr, hybrid modifications involving micro-arc oxidation (MAO) and Nd: YAG laser remelting were carried out in two combinations. The first consisted of laser modification before the production of the ceramic layer by the micro-arc oxidation process, and the second combination involved Nd: YAG laser modification after the MAO process. The creation of developed surface...
-
Peptide bond modification. I. Simple and efficient method of Boc-Gly[CH(OH)CH2]Gly-OH synthesis.
PublicationZaprezentowano prostą i efektywną metodę syntezy obu enancjomerów t-butoksykarbonylo chronionego pseudo dipeptydu (R) oraz (S)-Boc-Gly[CH(OH)CH2]Gly-OH.
-
Dual-band Millimetre Wave MIMO Antenna with Reduced Mutual Coupling Based on Optimized Parasitic Structure and Ground Modification
PublicationIn this study, a high-isolation dual-band (28/38 GHz) multiple-input–multiple-output (MIMO) antenna for 5G millimeter-wave applications is presented. The antenna consists of two interconnected patches. The primary patch is connected to the inset feed, while the secondary patch is arc-shaped and positioned over the main patch, opposite to the feed. Both patches function in the lower 28 GHz band, while the primary patch is accountable...
-
Modification of the Reloading Plastic Modulus in Generalized Plasticity Models for Soil by Introducing a New Equation for the Memory Parameter in Cyclic Loadings
PublicationNowadays, with the widespread supply of very powerful laboratory and computer equipment, it is expected that the analyses conducted for geotechnical problems are carried out with very high precision. Precise analyses lead to better knowledge of structures’ behavior, which, in turn, reduces the costs related to uncertainty of materials’ behavior. A precise analysis necessitates a precise knowledge and definition of the behavior...
-
Structure, performance, and photooxidative stability of Mater-Bi/brewers' spent grain composites as a function of filler thermomechanical and chemical modification
PublicationNowadays, to provide a step towards circularity, the development of sustainable polymer composites should include the application of waste-based materials that can act not only as simple fillers, reducing the use of polymers but also as functional additives, limiting or eliminating the use of synthetic components. Herein, in the presented study, the main by-product of the brewing industry, brewers' spent grain (BSG), was applied...
-
Enhanced electrochemical performance of sulfur-doped laser-induced graphene supercapacitors: Synergistic effects of doping and plasmochemical surface modification
PublicationThis work introduces a novel, scalable methodology for rapidly fabricating sulfur-doped laser-induced graphene with enhanced porosity and wetting characteristics, targeting advanced supercapacitor applications. An infrared laser scribing technique was employed to create a three-dimensional porous graphene network, with in-situ sulfur doping achieved through physical evaporation using powder precursor. A second-pass laser process...
-
Nanostructured graphene oxide enriched with metallic nanoparticles as a biointerface to enhance cell adhesion through mechanosensory modifications
Publication -
A strategy of minimal torque modifications in a question of actuation strategy for an over-actuated system of a planar walking robot
PublicationPraca opisuje zagadnienia modelowania i napędzania robotów kroczących. Na pewnych etapach ruchu, konstrukcje takie są układami napędzanymi nadmiarowo (liczba napędów/silników jest większa niż liczba stopni swobody układu). Dzieje się tak z uwagi na więzy jednostronne występujące w układzie. Dla układów płaskich, po pojawieniu się kontaktu koła i odnóża, układ o sześciu stopniach swobody przechodzi w układ o trzech stopniach swobody....
-
The Modifications of Haemoglobin, Erythropoietin Values and Running Performance While Training at Mountain vs. Hilltop vs. Seaside
Publication -
Solid-State Modification of Poly(butylene terephthalate) with a Bio-Based Fatty Acid Dimer Diol Furnishing Copolyesters with Unique Morphologies
PublicationCopolyesters based on poly(butylene terephthalate) (PBT) and a bio-based fatty acid dimer diol (FADD) were prepared by solid-state modification (SSM). The chemical incorporation of the FADD into the backbone of the PBT was proven using various techniques. It was clear that the incorporation rate was diffusion-limited rather than reaction-limited. From quantitative 13C NMR a nonrandom chemical microstructure was obtained at all...
-
Hazardous waste dewatering and dry mass reduction through hydrophobic modification by a facile one-pot, alkali-assisted hydrothermal reaction
Publication -
The phenomenon of increasing capacitance induced by 1T/2H-MoS2 surface modification with Pt particles – Influence on composition and energy storage mechanism
PublicationIn this paper, several approaches to the synthesis of molybdenum-based electrode materials for supercapacitors are presented, including anodization, hydrothermal process and annealing. For the material prepared via anodization of a molybdenum plate, followed by a hydrothermal process in thiourea aqueous solution, a thorough study of the Pt-surface modification through repetitive cycling in 1 M sulfuric acid with Pt acting as a...
-
Hydrothermal modification of TiO2 nanotubes in water and alkali metal electrolytes (LiNO3, NaNO3, KNO3) – Direct evidence for photocatalytic activity enhancement
PublicationThe influence of hydrothermal annealing (HA) of TiO2 nanotubes (TiO2-NTs) in various baths (H2O, LiNO3, NaNO3, KNO3 performed for 4 h, 24 h, 64 h), on their photocatalytic and photoelectrocatalytic properties, was studied. The use of electrolytes was to enable the monitoring of photoactivity changes as a result of the expected impact on the population of hydroxyl groups on the surface. The assumption turned out to be correct and...
-
Surface modification of PMMA polymer and its composites with PC61BM fullerene derivative using an atmospheric pressure microwave argon plasma sheet
PublicationThis paper presents the results of experimental investigations of the plasma surface modification of a poly(methyl methacrylate) (PMMA) polymer and PMMA composites with a [6,6]-phenyl-C61-butyric acid methyl ester fullerene derivative (PC61BM). An atmospheric pressure microwave (2.45 GHz) argon plasma sheet was used. The experimental parameters were: an argon (Ar) flow rate (up to 20 NL/min), microwave power (up to 530 W), number...
-
The electrochemical response to Au electrode modification steps towards viral electrochemical immunosensor preparation
Open Research DataThe dataset contains the electrochemical measurements (CV/EIS) carried out for the consecutive steps of the Au electrode functionalization, in separate subfolders, as described. The cyclic voltammetry (CV) was conducted using a Palmsens 4 potentiostat/galvanostat system (Methrom, Autolab, Netherlands) in the standard three-electrode configuration, with...
-
Tissue-Specific Differences in DNA Modifications (5-Hydroxymethylcytosine, 5-Formylcytosine, 5-Carboxylcytosine and 5-Hydroxymethyluracil) and Their Interrelationships
Publication -
Modifications and Improvements to the Collector Metal Method Using an mhd Pump for Recovering Platinum from Used Car Catalysts
Publication -
Recent progress in bio-based elastomers with intrinsic self-healing mechanisms - part I: Natural rubber modifications
Publication -
Modifications to the anaerobic digestion model no. 1 (ADM1) for enhanced understanding and application of the anaerobic treatment processes – A comprehensive review
PublicationAnaerobic digestion (AD) is a promising method for the recovery of resources and energy from organic wastes. Correspondingly, AD modelling has also been developed in recent years. The International Water Association (IWA) Anaerobic Digestion Model No. 1 (ADM1) is currently the most commonly used structured AD model. However, as substrates become more complex and our understanding of the AD mechanism grows, both systematic and specific...
-
Modification of quaternary structure of Candida albicans GlcN-6-P synthase and its desensitization to inhibition by UDP-GlcNAc by site-directed mutagenesis
PublicationSite-directed mutagenesis of the CaGFA1 gene encoding glucosamine-6-phosphate synthase from Candida albicans was performed. Desensitization of the enzyme to inhibition by UDPGlcNAc was achieved upon T487I and H492F substitutions at the UDP-GlcNAc binding site, exchange of D524, S525 and S527 for Ala at the dimer:dimer interface and construction of the tail-lock array (L434R and L460A) at the C-tail region. The first two sets if...
-
Influence of modification of the amino acids ionic liquids on their physico-chemical properties: Ionic liquids versus ionic liquids-supported Schiff bases
Publication -
X-ray diffraction spectra of modification of TiO2 nanotubes by graphene - strontium and cobalt molybdate perovskite
Open Research DataData show XRD results for strontium and cobalt molybdate-modified nanotubes that were also decorated with graphene oxide. The crystalline phases were characterized by X-ray diffractometer (Philips X”Pert with detector X’Celerator Scientific).
-
Biotrickling filtration of air polluted with hexane and cyclohexane: effects of trickling liquid modification with DES solutions
Open Research DataDataset presents selected parameters monitored during processes of biotrickling filtration of air polluted with hexane and cyclohexane.
-
The electrochemical response to glassy carbon electrode modification steps towards viral electrochemical immunosensor preparation
Open Research DataThe dataset contains the electrochemical measurements (CV/EIS) carried out for the consecutive steps of the glassy carbon GC electrode functionalization, in separate subfolders, as described. The cyclic voltammetry (CV) was conducted using a Palmsens 4 potentiostat/galvanostat system (Methrom, Autolab, Netherlands) in the standard three-electrode configuration,...
-
Endogenously generated DNA nucleobase modifications source, and significance as possible biomarkers of malignant transformation risk, and role in anticancer therapy
Publication -
Characteristic profiles of DNA epigenetic modifications in colon cancer and its predisposing conditions—benign adenomas and inflammatory bowel disease
Publication -
Effect of Solubilization on Acidification, Anaerobic Biodegradability, and Economic Feasibility via Ultrasonic–Zerovalent Iron–Acidic pH Pretreatment of Sludge
Publication -
The effect of chemical modifications on rheologicalproperties of collagen from of Baltic cod (Gadus morhua)skin stabilized by interaction with κ-carrageenan.
PublicationZbadano wpływ stężenia aldehydu glutarowego i EDC N-[3-(dimetyloamino)propylo]-N'-etylokarbodiimid na reologiczne właściwości kompleksu k-karagenu z kolagenem wydzielonym ze skór dorsza bałtyckiego (Gadus morhua) 0,5 M roztworem kwasu octowego i wytworzonych z nich błon. Stwierdzono, że dodanie do dyspersji aldehydu glutarowego, którego stężenie zmieniano od 0,05 do 0,2% powodowało natychmiastowy wzrost jej lepkości. Dodatek aldehydu...
-
Emergence of Aggregation Induced Emission (AIE), Room-Temperature Phosphorescence (RTP), and Multistimuli Response from a Single Organic Luminogen by Directed Structural Modification
Publication -
A few words on the modification of the ruling in the part concerning compensatory damages/ "Kilka słów o modyfikacji orzeczenia w części dotyczącej kompensacji szkody"
Publication -
Anion–π recognition between [M(CN)6]3− complexes and HAT(CN)6: structural matching and electronic charge density modification
Publication -
Assessment of the Effect of Structural Modification of Ibuprofen on the Penetration of Ibuprofen from Pentravan® (Semisolid) Formulation Using Human Skin and a Transdermal Diffusion Test Model
Publication -
Emergence of Aggregation Induced Emission (AIE), Room-Temperature Phosphorescence (RTP), and Multistimuli Response from a Single Organic Luminogen by Directed Structural Modification
Publication