Filters
total: 395
Search results for: tfusion
-
The fracture behaviour of notched PMMA specimens under simple loading conditions – Tension and torsion experimental tests
PublicationThis paper presents the results of experimental testing of flat PMMA specimens during uniaxial loading conditions. Two separate tests were conducted: tensile and torsion. The specimens were weakened with V-type edge notches with different root radii: 0.5; 2 and 10 mm. The specimens were made in two thickness variants: 5 and 15 mm. Monotonic tensile and torsion tests were carried out while keeping the averaged strain rate constant,...
-
The effect of preliminary creep-strain on material behavior under LCF tension/compression and pure torsion regimes
PublicationThis paper presents the results of experimental tests of monotonic tension and torsion, creep-rupture and preliminary creep at 200C and 300C, as well as low-cycle fatigue of 2024 T3511 aluminum alloy. The fatigue process was conducted at room temperature for uniaxial tension/compression and torsion. The as-received material and pre-deformed material were also investigated during creep at elevated temperature. Basic monotonic,...
-
The experimental and numerical investigation of fracture behaviour in PMMA notched specimens under biaxial loading conditions – Tension with torsion
PublicationThis paper presents the results of experimental fracture test of flat PMMA specimens under biaxial loading condition tension with torsion (proportional). The specimens were made in two thicknesses: 5 and 15 mm and were weakened with V-type edge notches with different root radii: 0.5; 2 and 10 mm. Thanks to the ARAMIS 3D 4 M non-contact vision system, measurement of the elongation and twist angle were recorded. During experimental...
-
The elasto-plastic numerical study of crack initiation in notched PMMA specimens under uniaxial loading conditions – Tension and torsion
PublicationThis paper presents the results of FEM numerical calculations aimed at describing the plastic strain and stress fields under critical loading conditions: tensile force or torsional moment. The calculations were carried out with reference to the results of experimental tensile and torsional tests of flat PMMA specimens weakened with V-notches of different root radii: 0.5, 2 and 10 mm. The procedure for conducting nonlinear numerical...
-
NUCLEAR FUSION
Journals -
Sensors and Sensor’s Fusion in Autonomous Vehicles
PublicationAutonomous vehicle navigation has been at the center of several major developments, both in civilian and defense applications. New technologies such as multisensory data fusion, big data processing, and deep learning are changing the quality of areas of applications, improving the sensors and systems used. New ideas such as 3D radar, 3D sonar, LiDAR, and others are based on autonomous vehicle revolutionary development. The Special...
-
Fusion 2050 – European and Polish Perspective
Publication -
Radar data fusion in the STRADAR system
PublicationThe main task of the Polish Border Guard is protection of the country’s border which requires utilization of multimedia surveillance systems automatically gathering, processing and sharing various data. The paper presents such a system developed for the Maritime Division of the Polish Border Guard within the STRADAR project and the problem of fusion of radar data in this system. The system, apart from providing communication means,...
-
Fractional Derivatives Application to Image Fusion Problems
Publication -
Sensor data fusion techniques for environment modelling
Publication -
FUSION SCIENCE AND TECHNOLOGY
Journals -
Plasma and Fusion Research
Journals -
In situ observations of fullerene fusion and ejection in carbon nanotubes
Publication -
The construction of bifunctional fusion proteins consisting of MutS and GFP
Publication -
Point-pixel fusion for object detection and depth estimation
Publication -
The construction of bifunctional fusion proteins consisting of MutS and GFP
PublicationSkonstruowano białka chimeryczne zawierające białko MutS z Thermus thermophilus i białko zielonej fluoresceiny GFP z Aequorea victoria, posiadające dla łatwiejszego oczyszczania domeny oligo-histydynowe na N- lub C-końcu. Fuzyjne białka rozpoznawały niekomplementarności w DNA podobnie do MutS T. thermophilus. Fluorescencyjne białka rozpoznające niekomplementarne DNA mogą być użyteczne w wykrywaniu jednonukleotydowych polimorfizmów...
-
Electron-difusion coefficiens in N2O
PublicationW pracy przedstawiono wyniki pomiarów stosunku współczynników dyfuzji poprzecznych i podłużnych do ruchliwości i prędkość dryfu elektronów jako funkcję zredukowanego pola elektrycznego w N2O. Współczynniki dyfuzji wyznaczono stosując metodę Towsenda-Huxleya; prędkość dryfu otrzymano używając techniki Bradbury-Nielsen. Całkowitych i częściowych przekrojów czynnych użyto do obliczenia współczynników metodą numeryczną.
-
Remote measurement of building usable floor area - Algorithms fusion
PublicationRapid changes that are taking place in the urban environment have significant impact on urban growth. Most cities and urban regions all over the world compete to increase resident and visitor satisfaction. The growing requirements and rapidity of introducing new technologies to all aspects of residents' lives force cities and urban regions to implement "smart cities" concepts in their activities. Real estate is one of the principal...
-
Evaluation of Decision Fusion Methods for Multimodal Biometrics in the Banking Application
PublicationAn evaluation of decision fusion methods based on Dempster-Shafer Theory (DST) and its modifications is presented in the article, studied over real biometric data from the engineered multimodal banking client verification system. First, the approaches for multimodal biometric data fusion for verification are explained. Then the proposed implementation of comparison scores fusion is presented, including details on the application...
-
Fusion of data from AIS and tracking radar for the needs of ECDIS
Publication -
Analysis of data fusion algorithms for the vessel with the dynamic positioning system
PublicationThe dynamic positioning (DP) system on the vessel is operated to control the position and heading of the vessel with the use of propellers and thrusters installed on the board. On DP vessels redundant measurement systems of position, heading and the magnitude and direction of environmental forces are required for safety at sea. In this case, a fusion of data is needed from individual measurement devices. The article proposes a...
-
Example of tension fabric structure analysis
PublicationThe aim of the work is to examine two variants of non-linear strain-stress relations accepted to description of architectural fabric. Discussion on the fundamental equations of the dense net model, used in description of coated woven fabric behaviour is presented. An analysis of tensile fabric structures subjected to the dead load and initial pretension is described.
-
Journal of Advances in Information Fusion
Journals -
PLASMA PHYSICS AND CONTROLLED FUSION
Journals -
Multisensor Tracking of Marine Targets - Decentralized Fusion of Kalman and Neural Filters
Publication -
Numerical weather prediction - data fusion to GIS systems and potential applications
Publication -
Track-to-track fusion in tracking of multiple targets in clutter - a comparative study.
PublicationPrzedstawiono i porównano algorytmy rozproszone wyznaczania trajektorii obiektów dynamicznych na podstawie danych z wielu źródeł. Rozważono przypadek, w którym dane dotyczące pozycji obiektów są zakłócone przez dodatkowe fałszywe wykrycia niezwiązane z obserwowanymi obiektami. Algorytmy rozproszone i centralne to dwie podstawowe klasy algorytmów służące do wyznaczania trajektorii obiektów dynamicznych na podstawie danych z wielu...
-
Spatial Visualization Based on Geodata Fusion Using an Autonomous Unmanned Vessel
PublicationThe visualization of riverbeds and surface facilities on the banks is crucial for systems that analyze conditions, safety, and changes in this environment. Hence, in this paper, we propose collecting, and processing data from a variety of sensors—sonar, LiDAR, multibeam echosounder (MBES), and camera—to create a visualization for further analysis. For this purpose, we took measurements from sensors installed on an autonomous, unmanned...
-
Ovarian Torsion in a Young Adolescent with Rokitansky Syndrome
Publication -
Size effect in concrete under splitting tension
PublicationThe size effect is a fundamental phenomenon in concrete materials. It denotes that both the nominal structural strength and material ductility always decrease with increasing element size under tension. In the paper splitting tensile tests on cylindrical concrete specimens with the different diameter were carried out. Two types of the loading strip (plywood board and steel cylinder) were used. The concrete strength and ductility...
-
Journal of Infusion Nursing
Journals -
Hierarchical Hydrographic Data Fusion for Precise Port Electronic Navigational Chart Production
Publication -
Synteza algorytmu detekcji pęknięcia szyby metodą ''data fission - data fusion''
PublicationPrzedstawiono założenia projektowe oraz proces syntezy algorytmu detekcyjnego akustycznego detektora pęknięcia szyby. W konstrukcji algorytmu użyto techniki rozszczepiania i syntezy danych. Przedstawiono użyte narzędzia badawcze, opracowany model pęknięcia szyby oraz wynki testowania finalnego algorytmu detekcyjnego. Metoda znalazła zastosowanie w konstrukcji akustycznego detektora pęknięcia szyby stosowanego w systemach alarmowych.
-
Fractal dimension for bending–torsion fatigue fracture characterisation
PublicationFracture surfaces after biaxial fatigue tests were compared using fractal dimension for three types of metallic materials in smooth and notched specimens made of S355J2 and 10HNAP steels and 2017-T4 aluminium alloy, considering both proportional and nonproportional cyclic loading. High-resolution optical 3D measurement studies were performed on the entire fracture surface. A direct correlation between fractal dimension and fatigue...
-
Factors influencing the development of otitis media with effusion in children
Publication -
Fractal dimension for bending–torsion fatigue fracture characterisation
Publication -
Saint-Venant torsion based on strain gradient theory
Publication -
Stress analysis of a strip under tension with a circular hole
PublicationThe paper addresses stress analysis of a strip with a circular hole under uniform uniaxial tension based oncircumferential stress expressionρπ. Stresses are analyzed in the infinite-length strips under tension with holes, the ratioof the hole radiusa to the strip half-widthb is either equal to:κ =a/b = 0.1 orκ = 0.5. Circumferential stresses aredetermined in selected cross-sections of the strip. The stress diagrams display local...
-
High temperature drying of beech with content of tension wood
PublicationThe presented artcle is focused on comparison of tension and normal wood of beech (Fagus sylvatica L.) in a high-temperature drying process. Samples of 26 mm thickness were selected from sapwood zone with different angle of growth rings. The article evaluated properties of tension and normal wood before and after drying process. Properties which are monitored were moisture, moisture gradients, covering tests, colour changes and...
-
Saint-Venant torsion based on strain gradient theory
PublicationIn this study, the Saint-Venant torsion problem based on strain gradient theory is developed. A total form of Mindlin's strain gradient theory is used to acquire a general Saint-Venant torsion problem of micro-bars formulation. A new Finite Element formulation based on strain gradient elasticity theory is presented to solve the Saint-Venant torsion problem of micro-bars. Moreover, the problem is solved for both micro and macro...
-
Modelling of concrete behaviour in uniaxial compression and tension with DEM.
PublicationW artykule omowiono wyniki modelowania betonu podczas jednoosiowego sciskania i rozciagania stosujac metode elementów dyskretnych. Beton zostal opisany jako material 3-fazowy (kruszywo, zaprawa cementowa i strefy kontaktu). Szczegolna uwage zwrocono na zjawiska mikro-strukturalne na poziomie kruszywa (lancuchy sil, wiry, obroty ziaren). Wyniki numeryczne zostaly porownano z wynikami badan doswiadczalnych.
-
Radar and Automatic Identification System Track Fusion in an Electronic Chart Display and Information System
Publication -
Close-Distance Optical Flow Fusion Using EKF for Multirotor UAV Position Estimation
Publication -
Data fusion of sparse, heterogeneous, and mobile sensor devices using adaptive distance attention
PublicationIn environmental science, where information from sensor devices are sparse, data fusion for mapping purposes is often based on geostatistical approaches. We propose a methodology called adaptive distance attention that enables us to fuse sparse, heterogeneous, and mobile sensor devices and predict values at locations with no previous measurement. The approach allows for automatically weighting the measurements according to a priori...
-
Fusion-based Representation Learning Model for Multimode User-generated Social Network Content
PublicationAs mobile networks and APPs are developed, user-generated content (UGC), which includes multi-source heterogeneous data like user reviews, tags, scores, images, and videos, has become an essential basis for improving the quality of personalized services. Due to the multi-source heterogeneous nature of the data, big data fusion offers both promise and drawbacks. With the rise of mobile networks and applications, UGC, which includes...
-
International Journal of Image and Data Fusion
Journals -
Fractal analysis of the bending-torsion fatigue fracture of aluminium alloy
Publication -
FUSION ENGINEERING AND DESIGN
Journals -
Fatigue of titanium alloy Ti6Al4V with diamond structure obtained by Laser Power Bed Fusion method
PublicationThis paper presents the results of fatigue tests conducted on Ti6Al4V titanium alloy with diamond structure obtained by the Laser Power Bed Fusion method. Samples used in tests were printed with porosities: 81%, 73%, 50%, 34% and near-zero porosity. Samples were subjected to cyclic tests with a constant stress amplitude. The number of cycles until sample failure was registered. Obtained fatigue test results made it possible to...
-
The Positioning Accuracy of BAUV Using Fusion of Data from USBL System and Movement Parameters Measurements
PublicationThe article presents a study of the accuracy of estimating the position coordinates of BAUV (Biomimetic Autonomous Underwater Vehicle) by the extended Kalman filter (EKF) method. The fusion of movement parameters measurements and position coordinates fixes was applied. The movement parameters measurements are carried out by on-board navigation devices, while the position coordinates fixes are done by the USBL (Ultra Short Base...