Filtry
wszystkich: 965
-
Katalog
Wyniki wyszukiwania dla: CIRCUIT LAYOUT CAD
-
Photovoltaic effect in the single-junction DBP/PTCBI organic system under low intensity of monochromatic light
PublikacjaPhotoelectric properties of the planar ITO/MoO3/DBP/PTCBI/BCP/Ag system were characterized on the basis of short-circuit current, open-circuit voltage and absorption spectra, and current-voltage measurements in the dark and under monochromatic illumination of low intensity. Photovoltaic performance of the system was compared with the performance of ideal semiconductor and excitonic cells of chosen bandgaps. Such analysis shows,...
-
Hysteresis modelling of a medium frequency single-phase transformer
PublikacjaThe article describes a feedback Preisach hysteresis model equivalent circuit implementation of a medium frequency single-phase transformer being a part of a high power and high efficiency DC-DC converter. The macroscopic models of magnetic hysteresis are introduced and the feedback Preisach model is selected for further analysis. The hysteresis model is developed for a prototype transformer and the hysteresis loops are compared...
-
Remarks on the Subject of Back-Up Protection of Residual Current Devices
PublikacjaResidual current devices without integral overcurrent protection (RCCBs) are back-up protected by fuses or miniature circuit-breakers (MCBs). If the latter are used, special attention must be given to the coordination between an RCCB and an MCB. This paper indicates probable cases of the aforementioned devices coordination, in which back-up protection of the RCCB is not adequate. A laboratory test has shown that depending on the...
-
A testing method of analog parts of mixed-signal electronic systems equipped with the IEEE1149.1 test bus
PublikacjaA new solution of the JTAG BIST for testing analog circuits in mixed-signal electronic microsystems controlled by microcontrollers and equipped with the IEEE1149.1 bus is presented. It is based on a new fault diagnosis method in which an analog circuit is stimulated by a buffered signal from the TMS line, and the time response of the circuit to this signal is sampled by the ADC equipped with the JTAG. The method can be used for...
-
Ex-situ XRD (X-ray Diffraction) results for electrodes under different charge/discharge states
Dane BadawczeEx-situ XRD was employed to analyze the energy storage mechanism of CPMD in ZICs system. The ZICs were firstly charged to 1.8 V from the open circuit voltage (at around 1.3 V), then discharge to 1.0 V and 0.2 V, and finally recharged to 1.0 V and 1.8 V. Sample abbreviations (CPMD) are in agreement with the markings used in the linked publication.
-
Canonical switched capacitor converters. Comments, complements, and refinements
PublikacjaSwitched Capacitor Converters (SCC) form useful blocks in low/medium power applications as they are suitable for integration, both as off-chip and on-chip IC realizations. However, the problem with SCC is that their voltage conversion ratio is topology-dependent. By changing the SC circuit configuration, we can gain control over voltage conversion but the available ratio remains of a discrete nature, i.e. it maps into a countable...
-
OpenGL accelerated method of the material matrix generation for FDTD simulations
PublikacjaThis paper presents the accelerated technique of the material matrix generation from CAD models utilized by the finite-difference time-domain (FDTD) simulators. To achieve high performance of these computations, the parallel-processing power of a graphics processing unit was employed with the use of the OpenGL library. The method was integrated with the developed FDTD solver, providing approximately five-fold speedup of the material...
-
Modelling of two-component turbulent mass and heat transfer in air-fed pressurised suits
PublikacjaIn this paper the modelling of an important industrial problem is addressed, which involves the two-component turbulent flow with heat transfer that takes place inside protective clothing. The geometry of the flow boundaries is reconstructed in a CAD system from photogrammetry scan data. The overall model is sufficiently realistic to allow, after validation, design improvements to be tested. Those presented here allow the reduction...
-
Modeling of conducted emission of dc-dc switch-mode converter
PublikacjaW publikacji zaprezentowano sposób modelowania i wyznaczania emisji przewodzonej zaburzeń elektromagnetycznych w przekształtnikach energoelektronicznych. Na przykładzie przekształtnika DC-DC, zostały dobrane odpowiednie narzędzia CAD do szerokopasmowego modelowania i symulacji przekształtnika energoelektronicznego. Otrzymane rezultaty zostały eksperymentalnie potwierdzone i porównane zarówno w dziedzinie czasu jak i częstotliwości...
-
Wizualizacja i analiza wyników pomiarów sekcji kadłuba statku.
PublikacjaPrzedstawiono zastosowania biblioteki OpenGL do wizualizacji wyników pomiarów sekcji i bloków kadłuba statku na etapie ich prefabrykacji. Omówiono najważniejsze aktualnie stosowane narzędzia i metody pomiarowe. Zaprezentowano również przykład użycia programu do wizualizacji wyników pomiarów wykonanych w Stoczni Gdynia S.A. i pokazano możliwości przenoszenia danych, zarówno pomiarowych jak i pochodzących z innych programów CAD.
-
Oxygen partial pressure and temperature dependence of Gerischer element of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of Gericher element at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C)and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent circuit...
-
Fitted impedance spectra of a symmetrical porous Sr0.86Ti0.65Fe0.35O3 oxygen electrode (sintered at 1000 °C, measured at 700 °C and 0.1% pO2) with an individual contributions of the respective fitting elements
Dane BadawczeThis dataset contains exemplary impedance spectra (measured at 700 °C and 0.1% pO2) for porous Sr0.86Ti0.65Fe0.35O3 oxygen electrode sintered at 1000 °C. Results of symmetric cell impedance measurement were converted to electrode surfaces area and dived by two electrodes. Dataset conatins also fitting results and individual contributions of the respective...
-
Oxygen partial pressure and temperature dependence of low frequency capacitance of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of low frequency capacitance at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C) and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent...
-
Oxygen partial pressure and temperature dependence of middle frequency capacitance of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of middle frequency capacitance at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C) and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent...
-
Fitted impedance spectra of a symmetrical porous Sr0.86Ti0.65Fe0.35O3 oxygen electrode (sintered at 1000 °C, measured at 800 °C and 0.1% pO2) with an individual contributions of the respective fitting elements
Dane BadawczeThis dataset contains exemplary impedance spectra (measured at 800 °C and 0.1% pO2) for porous Sr0.86Ti0.65Fe0.35O3 oxygen electrode sintered at 1000 °C. Results of symmetric cell impedance measurement were converted to electrode surfaces area and dived by two electrodes. Dataset conatins also fitting results and individual contributions of the respective...
-
Oxygen partial pressure and temperature dependence of low frequency resistance of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of low frequency resistance at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C) and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent...
-
Oxygen partial pressure and temperature dependence of series resistance of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of series resistance (R) at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C) and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent...
-
Oxygen partial pressure and temperature dependence of middle frequency resistance of symmetrical porous Sr0.86Ti0.65Fe0.35O3 electrode on CGO substrate
Dane BadawczeThis dataset contains values of middle frequency resistance at different temperatures (800 °C, 750 °C, 700 °C, 650 °C and 600 °C) and oxygen partial pressures (20%, 10%, 5%, 1%, 0.1% and 0.01% pO2) of symmetrical Sr0.86Ti0.65Fe0.35O3 electrode sintered at 1000 °C. This values were obtained by fitting each measured impedance spectra by electrical equivalent...
-
Optimization of transformation of measurements of ship hull blocks
PublikacjaArtykuł przedstawia analizę wyników pomiarów wykonanych na blokach kadłuba statku, aby ocenić ich przydatność montażową podczas ostatniej fazy montażu w suchym doku lub na pochylni. Analiza realizowana jest w dwóch krokach. Najpierw sprawdza się, czy bloki zostały wykonane z zachowaniem wymaganych tolerancji, a następnie czy istnieje możliwość połączenia ze sobą dwóch sąsiednich bloków. Ponieważ każdy blok jest mierzony w innym...
-
Case studies of resonance phenomena in high voltage overhead power lines with shunt reactors
PublikacjaMisguided design of the towers of power transmission lines can lead to serious problems such as voltage asymmetry, overvoltages, electric arc extinction difficulties or resonance – in case of double circuit line with shunt reactors. The paper points out those threats on example of 400 kV double circuit overhead transmission line with shunt reactors.
-
TeleCAD course online and evaluation procedure.
PublikacjaW artykule zaprezentowano system zarządzania nauczaniem na odległość -TeleCAD (Teleworkers Training for CAD Systems Users, projekt Leonardo da Vinci 1998-2001) i jego wykorzystanie w projekcie V Ramowy CURE 2003-2005). Przedstawiono również procedurę ewaluacyjną kursów na odległość na podstawie doświadczeń zdobytych podczas realizacji projektu Leonardo da Vinci EMDEL (European Model for Distance Education and Learning, 2001-2004).
-
Suitability study of hybrid model of electrodynamic actuator
PublikacjaThis paper presents the proposal of the hybrid circuit-field model of an electrodynamic actuator. The field model uses the inductor current as the input data which is obtained from the circuit model or experimentally. The field model implemented using the FLUX program makes it possible to easily determine the pressure distribution acting on the disc. The results have been verified experimentally.
-
Secondary arc modelling for single pole reclosing analyses
PublikacjaThe paper discusses two evaluation methods of single pole auto-reclosing process effectiveness in HV transmission lines. Secondary arc current and recovery voltage calculation results obtained by load flow calculation are compared to the results obtained by the time domain simulations. Moreover, a nonlinear secondary arc model implementation is presented. The paper presents the study results for the three types of EHV transmission...
-
A structure and design optimization of novel compact microscrip dual-band rat-race coupler with enhanced bandwidth
PublikacjaIn the letter, a topology of a novel compact wideband dual-band rat-race coupler has been presented along with its computationally efficient design optimization procedure. Reduction of the circuit size has been achieved by meandering transmission lines of the conventional circuit. At the same time, the number of independent geometry parameters has been increased so as to secure sufficient flexibility of the circuit, necessary in...
-
Paweł Burdziakowski dr inż.
Osobydr inż. Paweł Burdziakowski jest specjalista w zakresie fotogrametrii i teledetekcji lotniczej niskiego pułapu, nawigacji morskiej i lotniczej. Jest również licencjonowanym instruktorem lotniczym oraz programistą. Głównymi obszarami zainteresowania jest fotogrametria cyfrowa, nawigacja platform bezzałogowych oraz systemy bezzałogowe, w tym lotnicze, nawodne, podwodne. Prowadzi badania w zakresie algorytmów i metod poprawiających...
-
Weryfikacja doświadczalna analizy numerycznej stanowiska do badania silników wiatrowych
PublikacjaW pracy zawarto analizę porównawczą badań doświadczalnych i symulacyjnych stanowiska do badania silników wiatrowych. Stanowisko to zostało zbudowane w Pracowni podstaw Konstrukcji Maszyn znajdującej się na terenie Uniwersytetu Warmińsko-Mazurskiego w Olsztynie. W artykule zamieszczono wyniki badań doświadczalnych oraz symulacyjnych przeprowadzonych w systemach CAD/CAE. Wykorzystano analizy statyczne, dynamiczne z uwzględnieniem...
-
Weryfikacja doświadczalna analizy numerycznej stanowiska do badania silników wiatrowych
PublikacjaW pracy zawarto analizę porównawczą badań doświadczalnych i symulacyjnych stanowiska do badania silników wiatrowych. Stanowisko to zostało zbudowane w Pracowni podstaw Konstrukcji Maszyn znajdującej się na terenie Uniwersytetu Warmińsko-Mazurskiego w Olsztynie. W artykule zamieszczono wyniki badań doświadczalnych oraz symulacyjnych przeprowadzonych w systemach CAD/CAE. Wykorzystano analizy statyczne, dynamiczne z uwzględnieniem...
-
Wykorzystanie AutoCAD Civil3D na zajęciach z modernizacji dróg szynowych
PublikacjaPodstawowym programem CAD wykorzystywanym w procesie kształcenia na Wydziale Inżynierii Lądowej i Środowiska Politechniki Gdańskiej jest AutoCAD Civil 3D. Autor artykułu postanowił wykorzystać możliwości programu w ramach przedmiotu ''Modernizacja dróg szynowych''. Dokładniejsza analiza wykazała, że zagadnienia związane z projektowaniem nowego przebiegu linii kolejowej są na tyle skomplikowane, że w niektórych aspektach przerastają...
-
AutoCAD Civil3D w projektowaniu dróg szynowych
PublikacjaNa Wydziale Inżynierii Lądowej i Środowiska Politechniki Gdańskiej od kilku lat głównym programem typu CAD wykorzystywanym w procesie kształcenia jest AutoCAD Civil 3D. Sposób rozwiązywania przez program niektórych zagadnień z dziedziny projektowania dróg szynowych jest odmienny od obowiązujących w Polsce przepisów. Należy to uwzględnić w programie nauczania przedmiotów ''Drogi Szynowe'', ''Projektowanie dróg szynowych'' oraz ''Projektowanie...
-
Low cost electrochemical sensor module for measurement of gas concentration
PublikacjaThis paper describes a low cost electrochemical sensor module for gas concentration measurement. A module is universal and can be used for many types of electrochemical gas sensors. Device is based on AVR ATmega8 microcontroller. As signal processing circuit a specialized integrated circuit LMP9l000 is used. The proposed equipment will be used as a component of electronic nose system employed for classifying and distinguishing...
-
Earth wires currents calculation by tableau analysis
PublikacjaThe paper presents a new method to compute a phase-to-earth fault current distribution in overhead transmission line. The method is based on the tableau analysis of an unbalanced, multi-wire model of a transmission line. It allows for the calculation of current distribution in overhead earth wires along the transmission line. Additionally, it may be used to calculate currents in a tower’s earthing system as well as voltages over...
-
Low cost set-up for supercapacitors parameters evaluation
PublikacjaWe propose a use of a power amplifier in the circuit of voltage to current converter (current driver) for supercapacitor charging/discharging in controlled conditions. The current driver is controlled by DAC output of DAQ board and voltage of DUT is measured and a control loop is realized by software. In the circuit the DC current method of evaluation of capacitance and equivalent series...
-
Measurement method for capacitive sensors for microcontrollers based on a phase shifter
PublikacjaA complete measurement method dedicated to capacitive sensors has been developed. It includes the development of hardware (an analogue interface circuit for microcontrollers with built-in times/counters and analogue comparators) and software (a measurement procedure and a systematic error calibration (correction) algorithm which is based on a calibration dictionary). The interface circuit consists of a low-pass filter and a phase...
-
Persistences: analysis of the image of Gdańsk and its cultural identity through survey processes and digital architectural representation
PublikacjaThe aim of the research was to analyse the historical legacy/heritage of the city of Gdańsk in order to characterise the narrative tools which can be used to promote the cultural identity of the urban landscape. The main focus was on the city's defence system - a cultural route that is spatially limited to a relatively small area, but temporally spanning almost a millennium. The fortifications demarcate a spatial boundary, limiting...
-
Zastosowanie technik szybkiego prototypowania w optymalizacji konstrukcji wirników pomp
PublikacjaWykonanie optymalnie skonstruowanego wyrobu wymaga przeprowadzenia badań testowych już na etapie projektowania. Jedną z metod, za pomocą której można wykonać element już w fazie projektowania, jest stereolitografia. Metoda ta opiera się na warstwowej budowie prototypu na bazie polimeryzacji ciekłego fotopolimeru. Nie wymaga ona przy tym zastosowania form odlewniczych, narzędzi i dodatkowych metod obróbkowych, a model wytwarzany...
-
Centrum aktywności / Lubawa
PublikacjaStworzenie przestrzeni publicznej wpływającej pozytywnie na społeczne relacje – poczucie sprawczości, odpowiedzialności oraz współuczestnictwa jednostek w życiu lokalnej społeczności – wymaga wzięcia pod uwagę nie tylko obecnych oczekiwań jej użytkowników. Taka przestrzeń powinna również przewidywać i kształtować przyszłe aspiracje wspólnoty. Otwarte w 2020 roku Centrum Aktywności Społecznej zaprojektowane przez Autorską Pracownię...
-
Przegląd i analiza układów napędowych stosowanych w rowerach elektrycznych
PublikacjaStreszczenie ang. : The purpose of his article is an overview and analysis of the drive system used in electrical bikes. Classical and modern drive system are described. The stress is putted on the electrical motors used in that applications. Structure, control and power supply of most recent design are presented. The analysis applies to hub motor type Clyte 408 used as a bike drive. Authors have decided to build a filed-circuit...
-
On Design Optimization of Miniaturized Microscrip Dual-Band Rat-Race Coupler with Enhanced Bandwidth
PublikacjaIn the paper, a novel topology of a miniaturized wideband dual-band rat-race coupler has been presented. Small size of the circuit has been obtained by meandering transmission lines of the conventional circuit. At the same time, the number of independent geometry parameters has been increased in order to secure sufficient circuit flexibility in the context of its design optimization for dual-band operation. Optimum dimensions of...
-
Programmable feedforward linearized CMOS OTA for fully differential continuous-time filter design
PublikacjaW artykule przedstawiono metodę linearyzacji wzmacniacza transkonduktancyjnego (OTA) CMOS z zastosowaniem sprzężenia w przód. Wzmacniacz zbudowany jest z użyciem prostych par różnicowych, wzmacniacza w pętli sprzężenia zwrotnego do samoregulacji transkonduktancji wzmacniaczy oraz liniowej rezystancji odniesienia (R). W wyniku uzyskano znaczną linaryzację charakterystyk przejściowych wzmacniacza OTA. Symulacje komputerowe SPICE...
-
A general approach to continuous time Gm-C filters.
PublikacjaW pracy zaproponowano ogólną strukturę filtrów Gm-C z odpowiednim opisem macierzowym. W odniesieniu do tej struktury podano formuły analizy wrażliwościowej dla dowolnego filtru Gm-C czasu ciągłego. Analiza oparta na opisie macierzowym była wykorzystana również do porównania właściwości filtrów Gm-Ctrybu napięciowego i prądowego. Zdefiniowano dwie kanoniczne transformacje dla klasy filtrów zmiennych stanu.
-
Hybrid‐mode single‐slope ADC with improved linearity and reduced conversion time for CMOS image sensors
PublikacjaIn the paper, a single‐slope analog‐to‐digital converter (ADC) for integrated CMOS image sensor applications with an improved technique of conversion has been proposed. The proposed hybrid‐mode ADC automatically uses one of the following conversion techniques: time based (i.e. PWM) or voltage based (i.e. single‐slope). During the ADC operation, the clock frequency and reference voltage are modified in order to reduce the conversion...
-
Nonlinear Model of Synchronous Generator for Autonomous Electrical Power Systems Analysis
PublikacjaThis paper presents the nonlinear lookup table model for synchronous generator (SG) analysis. The saturation effects of the SG magnetic circuit have been considered. The saturated characteristic of the SG magnetic circuit are based on the open circuit saturation curve for magnetizing inductances. The model has been implemented into the Synopsys/Saber software using the MAST modelling language. To implement the no-load voltage characteristic...
-
Comparative Study of Integer and Non-Integer Order Models of Synchronous Generator
PublikacjaThis article presents a comparison between integer and non-integer order modelling of a synchronous generator, in the frequency domain as well as in the time domain. The classical integer order model was compared to one containing half -order systems. The half-order systems are represented in a Park d-q axis equivalent circuit as impedances modelled by half-order transmittances. Using a direct method based on the approximation...
-
Electrochemical studies for screen-printed carbon electrodes (SPCE) with boron-doped diamond foils
Dane BadawczeThis dataset contains electrochemical examination of SPCE paste and SPCE containing boron-doped diamond BDD foils. The studies include kinetics analyses with cyclic voltammetry and electrochemical impedance spectroscopy with different redox probes: hexacyanoferrate(III) and Hexaammineruthenium(III) and potentiostatic open circuit potential at different...
-
Response features for fast EM-driven design of miniaturized impedance matching transformers
PublikacjaA framework for low-cost EM-driven design optimization of compact impedance matching transformers is presented. Our technique is based on a bottom-up design where design requirements for the transformer circuit are translated into specifications for its building blocks. These elementary cells are optimized using response features. Subsequently, the entire circuit is fine-tuned using local response surface approximation models and...
-
Analiza nośności granicznej platformy roboczej na podłożu słabonośnym
PublikacjaAnaliza numeryczna nośności platformy roboczej z gruntu niespoistego na podłożu z gruntu spoistego o niskiej wytrzymałości. Analiza parametryczna uwzględniająca wpływ miąższości platformy oraz kąta tarcia wewnętrznego materiału platformy i wytrzymałości na ścinanie bez odpływu warstwy słabonośnej. Uwzględnienie różnych schematów zniszczenia podłoża metodą kinematyczną z zastosowaniem optymalizacji (Distinct Layout Optimisation)....
-
Warunek zwarciowy SkQ/Sn>=20 ograniczeniem rozwoju OZE
PublikacjaW referacie omówiono zagadnienia związane z warunkiem zwarciowym, czyli ilorazem mocy zwarciowej w rozpatrywanym miejscu przyłączenia do sieci elektroenergetycznej źródła energii i mocy znamionowej tego źródła. Wskazano jego pochodzenie oraz przedyskutowano zasadność jego stosowania w analizach przyłączeniowych.
-
A Method for Determination and Compensation of a Cant Influence in a Track Centerline Identification Using GNSS Methods and Inertial Measurement
PublikacjaAt present, the problem of rail routes reconstruction in a global reference system is increasingly important. This issue is called Absolute Track Geometry, and its essence is the determination of the axis of railway tracks in the form of Cartesian coordinates of a global or local coordinate system. To obtain such a representation of the track centerline, the measurement methods are developed in many countries mostly by the using...
-
Optymalizacja transformacji wyników pomiarów bloków kadłuba statku z uwzględnieniem ograniczeń
PublikacjaArtykuł przedstawia algorytm optymalizujący transformację wyników pomiarów bloków i sekcji kadłuba statku z uwzględnieniem ograniczeń. Optymalizacji podlega suma odległości pomiędzy mierzonymi punktami, a korespondującymi punktami w modelu CAD, uwzględniając jedno z dwóch możliwych ograniczeń: wspólna płaszczyzna, albo wspólna oś. Transformacja wyników pomiarów wykonywana jest wcelu przeprowadzenia porównania faktycznych wymiarów...
-
Electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for porous SrTi0.30Fe0.70O3-d oxygen electrode measured at 800 °C and 15% oxygen partial pressure
Dane BadawczeThis dataset contains electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for symmetrical cell with porous SrTi0.30Fe0.70O3-d oxygen electrodes sintered at 800 °C. EIS spectra were measured at 800 °C and 15% of oxygen partial pressure. Spectra of two RCPE elements from equivalent circuit , are also included....