Filters
total: 658
filtered: 480
Search results for: SPRAY CONE ANGLE
-
An Extended Control of the Input Angle for Matrix Converters Connected with the Non-Unity Power Factor Loads.
PublicationThis paper proposes a novel PWM modulation algorithm for Multiphase Conventional Matrix Converters (MCMC), with 3 inputs and k outputs, using the transfer function of the load angle. The proposed approach extends the range of power angle control at the input during the operation with a maximum voltage transfer ratio. The proposed concept is based on the Direct Analytic Voltage PWM (DAV--PWM) modulation with an elliptical trajectory...
-
Measurements of droplet contact angle of nanofluids
PublicationPrzedstawiono wyniki pomiarów kąta zwilżania trzech nanocieczy: woda-Al2O3, woda-TiO2 oraz woda-Cu. Koncentracja nanocząstek wynosiła: 0.01%, 0.1% oraz 1%. Pomiary przeprowadzono dla podłoża szklanego, aluminiowego i ze stali nierdzewnej. Kąt zwilżania mierzono za pomocą goniometru, a także na podstawie zdjęć wykonanych za pomocą kamery cyfrowej.
-
Augmented speed control scheme of dual induction motors with mutual flux angle control loop
PublicationThis paper proposes an augmented speed control scheme of dual induction motors fed by a five-leg voltage source inverter (VSI) with a common/shared-leg. An additional control loop is proposed here and based on the mutual flux angle – the difference between flux angular positions of the IMs. The main purpose of this research is to minimize the energy losses in the common inverter leg by controlling the mutual flux angle, at equal...
-
Evaluation of the stiffness modulus and phase angle of cold in-place recycled mix-tures for long curing periods
PublicationArticle presents the changes inbehaviour of cold-in place recycling mixtures made using cement and bituminous emulsion (CIR mixtures) after anelongated time of curing. Most of the available literatureregarding change instiffness modulus and phase angle presents resultsfor a maximum of several dozen days,which makesit difficult to predict the behaviour over the whole life of the compacted layer. The article...
-
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
PublicationThe friction stir welding (FSW) of tool pin geometry plays a critical role in the final properties of the produced joint. The tool pin geometry directly affects the generation of heat and the flow of internal materials during the FSW process. The effects of the FSW tool pin angle on heat generation and internal flow have not been quantitatively investigated in detail. In this manuscript, a validated Computational Fluid Dynamic...
-
Examination method of the effect of the incidence angle of laser beam on distance measurement accuracy to surfaces with different colour and roughness
PublicationInterest in the influence of the incidence angle of a laser beam to distance measurements can be seen in many areas of science and technology: geodesy, glaciology, archaeology, machine automation, and others. This paper presents results of measurements of the effect of the incidence angle of a laser beam to distance measurements to the surfaces of different colour and roughness by Topcon's electro-optical total station with an...
-
Modelling of the finite amplitude waves interaction problem inside truncated cone.
PublicationModel matematyczny zjawiska oddziaływania fal o dużej amplitudzie dla przetwornika kołowego zbudowanego w oparciu o równanie KZK. Rozwiązania zagadnienia poszukiwano wewnątrz stożka ściętego. Do rozwiązania zagadnienia zastosowano metodę różnic skończonych. Podano przykładowe wyniki badań numerycznych.
-
Methods of solving the Atkins equation determine shear angle with taking into consideration a modern fracture mechanics
PublicationIn the paper are presented methods of solving nonlinear Atkins equation . The Atkins equation describe shear angle with taking into account properties of material cutting. To solve Atkins equation has been used iterative methods: Newton method and simplified method of simple iteration. Method of simple iteration is presented in the form of Java application.
-
Angle Tracking Observer for Filtering Rotor Position Estimates in Sensorless Electric Drives
PublicationSensorless electric drives use measurements of electrical quantities to estimate rotor position and speed. Measurement errors deteriorate the estimation accuracy, thus additional means are necessary to remove high-frequency components from estimated signals. This paper proposes to use an Angle Tracking Observer (ATO) for reducing noise in rotor position estimates, which is related to random errors in the measurements. A simplified,...
-
Oxide Layers Fabricated by Spray Pyrolysis on Metallic Surfaces
Publicationw pracy przedstawiono wyniki badań nad opracowaniem optymalnych warunków przygotowania warstwy stabilizowanego itrem cyrkonu jako prekursora na stali 316L jako podłoża za pomocą pirolizy aerozolowej.
-
CGO as a barrier layer between LSCF electrodes and YSZ electrolyte fabricated by spray pyrolysis for solid oxide fuel cells
PublicationPerovskite La0.6Sr0.4Co0.2Fe0.8O3 − δ (LSCF) is often used as a cathode material for solid oxide fuel cells (SOFC) due to high mixed ionic and electronic conductivity and good catalytic activity. Unfortunately, sintering of the LSCF cathode together with the yttria stabilized zirconia (YSZ) electrolyte, leads to formation of the La2Zr2O7 and SrZrO3 phases in the interface. These phases increase the resistance of the cell. To avoid...
-
Improvement of Oxygen Electrode Performance of Intermediate Temperature Solid Oxide Cells by Spray Pyrolysis Deposited Active Layers
PublicationIntermediate temperature solid oxide fuel cells oxygen electrodes are modified by active interfacial layers. Spray pyrolysis is used to produce thin (≈500 nm) layers of mixed ionic and electronic conductors: Sm0.5Sr0.5CoO3−δ (SSC), La0.6Sr0.4CoO3−δ (LSC), La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF), and Pr6O11 (PrOx) on the electrode–electrolyte interface. The influence of the annealing temperature on the electrode polarization (area specific...
-
The effect of impacted third molars on second molar external root resorption, a cross-sectional cone beam computed tomography study
PublicationBackground: Third molars have the highest prevalence of impaction in teeth and can cause pathological damage on the adjacent second molars. This study aims to evaluate the effects of factors related to impacted third molars on external root resorption (ERR) in adjacent second molars using cone-beam computed tomography (CBCT). Material and Methods: In CBCTs, the effect of impacted third molars on the root surface of adjacent second...
-
A novel concept of enhanced direct-contact condensation of vapour- inert gas mixture in a spray ejector condenser
PublicationAn analytical model of direct steam condensation (DCC) in the novel idea of spray ejector condenser (SEC) in the presence of inert gas has been developed. It is based on continuity, momentum and energy equations for the steam-carbon dioxide mixture and direct contact condensation mechanisms due to heat transfer and concentration. Crucial in the process of DCC is atomisation of the motive fluid in the ejector. The effect of atomised...
-
Camera angle invariant shape recognition in surveillance systems
PublicationA method for human action recognition in surveillance systems is described. Problems within this task are discussed and a solution based on 3D object models is proposed. The idea is shown and some of its limitations are talked over. Shape description methods are introduced along with their main features. Utilized parameterization algorithm is presented. Classification problem, restricted to bi-nary cases is discussed. Support vector...
-
INVESTIGATION OF JOURNAL SLIDE BEARINGS UNDER THE ANGLE OF THEIR FUNCTIONING
PublicationPaper presents the structure and principle of operation of a stand for measurements of influence of the lubrication method and process on functioning of journal slide bearings in their various technical states. Measurements performed on the stand make it possible to take advantage of the new method of evaluating the influence of physical and chemical properties of lubricating oil on the coefficient of friction in the mixed friction...
-
Free Vibration of Cantilever Bars Having a Shape of Solid and Hollow Curvilinear Truncated Cone
Publication -
Experimental investigation of the flow pattern and wall pressure distribution in a silo with double-cone insert
PublicationArtykuł opisuje przeprowadzone badania przepływów silosowych i naporu materiałów sypkich podczas napełniania i opróżniania silosu o średnicy 2.5 m wyposażonego we wkładkę "podwójny stożek". Badania przeprowadzane były w Instytucie Badawczym Tel-Tek w Norwegii. Materiałem użytym był suchy piasek. Napór na ścianę mierzony był bezpośrednio za pomocą 10 czujników wbudowanych w ścianę. Badania eksperymentalne pokazały duży wpływ wkładki...
-
New Aspects of Virtual Sound Source Localization Research—Impact of Visual Angle and 3-D Video Content on Sound Perception
PublicationThe influence of image on virtual sound source localization, called the “image proximity effect” or the “ventriloquism effect”, is a well known phenomenon. This paper focuses on other aspects related to this effect, namely the impact of the visual angle of the presented object and 3D video content on sound perception. The research conducted confirmed that the visual angle of the presented object determines the image proximity effect...
-
New Simple and Robust Method for Determination of Polarity of Deep Eutectic Solvents (DESs) by Means of Contact Angle Measurement
PublicationThe paper presents a new method for evaluating the polarity and hydrophobicity of deep eutectic solvents (DESs) based on the measurement of the DES contact angle on glass. DESs consisting of benzoic acid derivatives and quaternary ammonium chlorides–tetrabutylammonium chloride (TBAC) and benzyldimethylhexadecylammonium chloride (16-BAC)—in selected molar ratios were chosen for the study. To investigate the DESs polarity, an optical...
-
Increasing the Utilization of dc-link Voltage of a Five-Leg VSI Based on Rotor Angle Control of Dual Induction Motors
PublicationThis paper introduces an increased utilization of the dc-link voltage of a five-leg voltage source inverter (VSI) based on the rotor flux angle control technique for dual induction motors, IM. The main purpose is to utilize additional abilities provided by a multi-motor drive system in limited operating conditions. Generally, a multi-motor drive system is widely used in electric vehicles (EVs), traction systems and in several industrial...
-
Oxide layers fabricated by spray pyrolysis for resistance random access memory
PublicationW pracy zbadano przydatność pirolizy aerozolowej do wytwarzania warstw dla memrystorów.
-
Contact angle of the ferronanofluid and influence of the magnetic field on the drying droplet
Publication -
Advanced control of induction motor based on load angle estimation.
PublicationW artykule przedstawiono układ sterowania silnikiem asynchronicznym klatkowy wykorzystujący estymację kąta obciążenia pracujący bez pomiaru prędkości obrotowej. W artykule przedstawiono zasadę działania układu i motodę odtwarzania zmiennych opartą w części o zależności stanu ustalonego. Przedstawiono zrealizowany regulator rozmyty kąta obciążenia. Zaprezentowane zostały wyniki symulacji i eksperymentu przeprowadzone z użyciem...
-
Influence of intermixing at the Ta/CoFeB interface on spin Hall angle in Ta/CoFeB/MgO heterostructures
PublicationWhen a current is passed through a non-magnetic metal with strong spin-orbit coupling, an orthogonal spin current is generated. This spin current can be used to switch the magnetization of an adjacent ferromagnetic layer or drive its magnetization into continuous precession. The interface, which is not necessarily sharp, and the crystallographic structure of the nonmagnetic metal can both affect the strength of current-induced...
-
Small-Angle Neutron Scattering Study of the Structure of Mixed Micellar Solutions Based on Heptaethylene Glycol Monotetradecyl Ether and Cesium Dodecyl Sulfate
PublicationThe micellization in mixed aqueous systems based on a nonionic surfactant, heptaethylene glycol monotetradecyl ether (C14E7), and an anionic surfactant, cesium dodecyl sulfate, has been investigated by small-angle neutron scattering. Preliminary data on the behavior of the C14E7 aqueous solutions (with three concentrations, 0.17, 0.5, and 1%) mixed with a small amount of anionic surfactant, cesium dodecyl sulfate, are reported.
-
Corrosion Study of Ceria Protective Layer Deposited by Spray Pyrolysis on Steel Interconnects
PublicationSingle fuel cells and electrolysis cells are assembled into stacks using interconnects in order to increase power and gas production capacity. The most common choice for the interconnect material is stainless steel. It has good electrical and mechanical properties and is also cost effective. One of the problems when using steel is the formation of a thermally grown oxide scale during use which has a lower electrical conductivity...
-
Corrosion resistance of sintered duplex stainless steels in the salt fog spray test
Publication -
Effect of the Concentration of Hop Cone Extract on the Antibacterial, Physico-Chemical and Functional Properties of Adhesive Toilet Cleaners
Publication -
High meniscal slope angle as a risk factor for meniscal allograft extrusion
PublicationA meniscal graft extrusion is still an unresolved problem that affects most patients after a meniscal transplantation. Despite the advances in surgical techniques, together with the improved methods for a meniscal allograft sizing, success is only observed in up to 75% of patients after they experience a meniscal allograft transplantation. Because a meniscal extrusion is associated with a cartilage deterioration and the progression...
-
The prediction method of the shear angle in the cutting zone during wood sawing
PublicationW artykule opisano metodę przewidywania kąta ścinania w strefie skrawania dla przypadku przecinania drewna. Kąt ścinania był określany z wykorzystaniem współczesnej mechaniki pękania. Nieliniowe równanie opisujące tą wielkość było rozwiązywane numerycznie za pomocą metody iteracyjnej Newton-Raphson. Otrzymane wyniki obliczeń wykazują możliwość rozszerzenia obszaru modelowania efektów energetycznych procesu przecinania drewna nawet...
-
In-plane shear nonlinearity in failure behavior of angle-ply laminated shells
PublicationThe paper concerns the progressive failure analysis of laminates with the in-plane shear nonlinearity accounted for.The nonlinear shear response of the layer is described by the constitutive relation treating the stresses as a function of strains. Thus it can be easily incorporated into the displacement-based FEM codes. The brittle failure mechanisms of the fibers and the matrix of the layer are recognized with the use of the Hashin...
-
Elastic electron scattering in neon in the 110°-180° scattering angle range.
PublicationZmierzono różniczkowe przekroje czynne na rozproszenie sprężyste elektronów na atomach neonu dla energii elektronów równych 7,10,15eV w zakresie kątów rozproszenia 110° - 180°
-
The concept of weighted mean friction angle in bearning capacity of footings of sands
PublicationZagadnienie średniej ważonej kąta tarcia wewnętrznego w nośności fundamentów posadowionych w gruntach niespoistych.
-
Production of wheat bread with spray-dried potato juice: Influence on dough and bread characteristics
Publication -
Spray-Dried Potato Juice as a Potential Functional Food Component with Gastrointestinal Protective Effects
Publication -
Second and third harmonic nonlinear optical process in spray pyrolysed Mg:ZnO thin films
Publication -
Use of hop cone extract obtained under supercritical CO2 conditions for producing antibacterial all-purpose cleaners
Publication -
Investigation on polypropylene friction stir joint: effects of tool tilt angle on heat flux, material flow and defect formation
PublicationTool tilt angle (TTA) is a critical factor that can control material flow in polymeric materials' friction stir joining (FSJ). This study selected a TTA range between 0° to 4° for FSJ of polypropylene (PP) polymer sheet. A modified computational fluid dynamic (CFD) technique was implemented to gain a deep understanding of the effects of TTA during FSJ of PP. The PP joint's internal flow, defect formation, heat generation, and tensile...
-
Measurement of distance, velocity and angle of arrival using FMCW-CW combined waveform
PublicationA procedure of tacking small flying object based on a general principle of FMCW and Doppler radar is presented. In order to increase measurement range, this technique uses active signal source on the moving object. For simultaneous measurements of distance, radial velocity and direction (AoA) as well as simplified synchronization a combined FMCW-CW waveform is proposed. The presented measurement system was realized and verified...
-
Effect of Sieve Unit Inclination Angle in a Rotary Cleaning Device for Barley Grain
Publication -
A study of electron impact excitation of molecular oxygen at a scattering angle of 180 st.
PublicationZbadano wzbudzenie tlenu cząsteczkowego w zderzeniu z elektronem dla rozproszenia do tyłu, pod kątem 180 st. Do pomiarów wykorzystano nowe źródło lokalnego pola magnetycznego o geometrii stożkowej.
-
Evaluation of fouling potential of nanofiltration membranes based on the dynamic contact angle measurements
Publication -
Analyses of the effect of tooth rake angle and friction conditions upon the shear angle in the cutting zone during wood sawing. - [Chapter III]W : Wood machining and processing - product and tooling quality development
PublicationW pracy przedstawiono analizy wpływu wartości kąta natarcia piły i warunków tarcia na zmiany kata ścinania w strefie skrawania podczas przecinania drewna. W obliczeniach numerycznych kąta ścinania wykorzystywano podejście oparte o współczesną mechanikę pękania. Obliczenia prowadzono dla próbek z drewna dębu, jesionu po modyfikacji termicznej jak również dla drewna niemodyfikowanego. Dla drewna jesionowego modyfikowanego termicznie...
-
Radar time budget optimization subject to angle accuracy constraint via cognitive approach
PublicationThe problem of minimizing dwell time in multifunction phased array radar is considered. Target of interest is assumed to fluctuate according to a generalization of Swerling family and the parameters of fluctuation model are assumed to be known. The a'priori position of the target is uncertain. Optimization, whose variables include pulse count and array transmit beampattern, is carried out subject to achieving a desired accuracy...
-
The effect of boiling in a thermosyphon on surface tension and contact angle of silica and graphene oxide nanofluids
Publication -
coincidence investigation of inelastic electron-atom collisions with magnetic selection of scattering angle - feasibility study
PublicationOpisana została nowa aparatura do badania zderzeń elektronów z atomami metodą koincydencji z wykorzystaniem techniki lokalnego pola magnetycznego. Połączenie obu metod umożliwia wyznaczenie parametrów koincydencji w pełnym kącie rozproszenia. W pracy zaprezentowano pierwsze widma energii straconej oraz widma koincydencji.
-
Effect of Sieve Drum Inclination Angle on Wheat Grain Cleaning in a Novel Rotary Cleaning Device
Publication -
Analysis of the Sieve Unit Inclination Angle in the Cleaning Process of Oat Grain in a Rotary Cleaning Device
Publication -
The influence of the fuel spray nozzle geometry on the exhaust gas composition from the marine 4-stroke diesel engine
PublicationThe paper presents experimental research on a 4-stroke, 3-cylinder, turbocharged AL25/30 Diesel engine. Research consisted in investigating the effect of the geometry of the fuel injectors on the exhaust gas composition from the engine. During measurements, the engine was operated with a regulator characteristic of a load range from 40 kW to 280 kW, made by electric water resistance. The engine was mechanically coupled to the electric...