Filters
total: 609
Search results for: DESIGN MODIFICATION
-
Effect of the ex situ physical and in situ chemical modification of bacterial nanocellulose on mechanical properties in the context of its potential applications in heart valve design
PublicationBacterial nanocellulose (BNC) is a promising material for heart valve prostheses. However, its low strength properties limit its applicability in cardiovascular surgery. To overcome these limitations, the mechanical properties of BNC can be improved through modifications. The aim of the research was to investigate the extent to which the mechanical properties of BNC can be altered by modifying its structure during its production...
-
Towards a modification of a regulatory framework aiming at bunker oil spill prevention from ships - A design aspect of bunker tanks vents location guided by CFD simulations
PublicationAlthough accidental bunker oil spills at seaway are relatively rare events, they can be pose real threat to the natural marine environment. One of the reasons for the bunker spill to occur is a design failure; one of the ways it can demonstrate is an improper location or height of vent heads, leading to a bunker oil discharge during heavy rolling, due to sloshing phenomenon. Design of a ship and her systems is guided by various...
-
Experimental examination and modification of chip suction system in circular sawing machine
PublicationThe article presents the results of experimental examination of the wood chip suction system in the existing sliding table saw before and after its modifi cation. The studies focused on the extraction hood of the mentioned system. The methodical experimental research of the pressure distribution inside the hood during wood chip removal for the selected rotational speed of saw blades of 3500 and 6000 min-1 with a diameter of 300...
-
Evaluation of the Cathodic Electrodeposition Effectiveness of the Hydroxyapatite Layer Used in Surface Modification of Ti6Al4V-Based Biomaterials
PublicationThe important issue associated with the design and the fabrication of the titanium and titanium alloy implants is the increase of their biointegration with bone tissue. In the presented paper, the research results concerning the conditions used in the cathodic deposition of hydroxyapatite on the surface Ti6Al4V substrates primarily modified by the production of TiO2 nanoporous coatings, TiO2 nanofibers, and titanate coatings, are...
-
Laser-assisted modification of titanium dioxide nanotubes in a tilted mode as surface modification and patterning strategy
PublicationElectrochemical anodization is regarded as a facile and easily scalable fabrication method of titania nanotubes (TiO2NTs). However, due to the extended duration of calcination and further modifications, much faster alternatives are highly required. As a response to growing interest in laser modification of nanotube arrays, a comprehensive investigation of pulsed-laser irradiation and its effect onto TiO2NT properties has been carried out....
-
Modelling of some stealth features for a small navy ship at the concept design stage.
PublicationIn this paper the basic research problems associated with modelling the basic stealth features for a small navy ship at the concept design stage are introduced. Amongst the major stealth features considered are: the modification of the immersed ship hull form by a rapid change of the ship loading condition, and modification of the ship boundary layer by the hull skin cover. The other stealth features of the ship are not presented...
-
Peptide modification with thiomalonoamide moiety
PublicationAbstract: Meldrum acid derivatives under the thermal decomposition are well known source of ketenes. Recently we investigated chemical properties of thiocarbamolyl meldrum acids. We found that 5-(α-alkylamino- α'-sulfhydryl)methylene Meldrum's acids hated in the presence of amines produce thiomalonamides. We used this reaction to the one pot synthesis of series of short peptides containing thiomalonoamide motif.
-
Modelling of some stealth features for a small navy ship at the concept design stage - part II
PublicationIn the paper a few problems associated with modelling the basic stealth features for a small ship at the concept design stage are introduced. One problem concerns the modification of the immersed ship hull using the rapid change of the ship loading condition. The second is associated with the modification of the ship boundary layer by the hull skin cover. The other stealth features of the ship are not presented in this paper. The...
-
Real-time speech-rate modification experiments
PublicationAn algorithm designed for real-time speech time scale modification (stretching) is proposed, providing a combination of typical synchronous overlap and add based time scale modification algorithm and signal redundancy detection algorithms that allow to remove parts of the speech signal and replace them with the stretched speech signal fragments. Effectiveness of signal processing algorithms are examined experimentally together...
-
Computational modelling of the modification of epoxy resins
PublicationSymulacja komputerowa właściwości fizycznych sieci żywic epoksydowych (DGEBA/DDM) modyfikowanych związkami akrylowymi przy użyciu programu Cheops® MillionZillion Software.
-
Titania modification for photocatalytic wastewater treatment.
PublicationW celu polepszenia efektywności katalitycznej za pomocą separacji ładunkowe-/n+ TiO2 został zmodyfikowany jonami i klasterami platyny. Badania degradacji z wykorzystaniem promieniowania UV wykazały, że domieszkowanie powierzchniowe (adsorpcja) powoduje znaczne zwiększenie efektywności katalizatora od domieszkowania wewnętrznego
-
Modification of gradient HPLC method for determination of small molecules' affinity to human serum albumin under column safety conditions: Robustness and chemometrics study
PublicationIn the early stages of drug discovery, beyond the biological activity screening, determining the physicochemical properties that affect the distribution of molecules in the human body is an essential step. Plasma protein binding (PPB) is one of the most important investigated endpoints. Nevertheless, the methodology for measuring %PPB is significantly less popular and standardized than other physicochemical properties, like lipophilicity....
-
Modification of titanium phosphate precipitated from titanylsulfate
Publication -
Effect of surface modification on starch biopolymer wettability
Publication -
Effect of surface modification on starch/phospholipid wettability
Publication -
Influence of titanium dioxide modification on the antibacterial properties
Publication -
New procedure of silica gel surface modification
Publication -
Properties of corn starch subjected hydrothermal modification
Publication -
Proposition of the steam turbine governor structure modification
PublicationThere is considered the steam turbine governor operation during defense and restoration of the power system. It points out weaknesses of currently used governor structures. The new controller is proposed, that takes advantages of those curently used. The new controller allows for more effective control of the turbine in emergency situations, at frequencies much different from the nominal value.
-
Totally laparoscopic feeding jejunostomy – a technique modification
Publication -
Surface modification of cotton fabrics for sublimation printing
Publication -
Novel structure and design of compact UWB slot antenna
PublicationIn this paper, a novel structure of a compact UWB slot antenna is presented along with a simulation-driven design optimization algorithm for adjusting geometry parameters of the device. Our primary objective is to obtain small footprint of the structure while maintaining its acceptable electrical performance. It is achieved by introducing sufficiently large number of geometry degrees of freedom, including increased number of parameterized...
-
Modification of cement-ash composites with steel fibre addition
PublicationPraca zawiera wyniki badań kompozytów cementowo-popiołowych, w których popiół zastosowano jako częściowy zamiennik cementu. Do kompozytów dodano niewielkie ilości dwóch rodzajów włókien stalowych. Zbadano właściwości techniczne kompozytów. Wytrzymałości kompozytów cementowo-popiołowych z włóknami stalowymi w stosunku do wytrzymałości kompozytów bez włókien po wszystkich okresach wiązania i twardnienia były wyższe od kilku do kilkudziesięciu...
-
Human voice modification using instantaneous complex frequency
PublicationThe paper presents the possibilities of changing human voice by modifying instantaneous complex frequency (ICF) of the speech signal. The proposed method provides a flexible way of altering voice without the necessity of finding fundamental frequency and formants' positions or detecting voiced and unvoiced fragments of speech. The algorithm is simple and fast. Apart from ICF it uses signal factorization into two factors: one fully...
-
Selected Propagation Models Modification for Application in Container Terminal
PublicationIt is particularly important to look for any propagation model that could be useful for designing mobile radio systems in container terminal environment. The selected propagation models have been investigated. The applied research methodology has been described too. Results of the statistical adjustment in terms of signal loss determination in such environment have been analysed. The analysis have proved effectiveness of adjustment...
-
The effect of thermal modification on the quality of the milled surface of beech and pine wood
PublicationThe article deals with the effect of thermal modification on the quality of the created surface during milling on CNC milling cutters. The quality of the created surface is evaluated based on surface roughness, specifically its roughness parameter Ra. The observed surface is created by a shank cutter with a diameter of 20 mm and three cutting edges in a spiral at a standard speed of 18,000. min-1. The article compares thermally...
-
Modification of Titanium (IV) Dioxide with Small Silver Nanoparticles: Application in Photocatalysis
PublicationThe surface of commercial TiO2 compounds (P25 and ST01) has been modified with Ag nanoparticles induced by radiolysis. On P25, the Ag nanoclusters are very small (1−2 nm) and homogeneous in size while on ST01, two populations of nanoparticles are obtained, small nanoparticles (1−2 nm) and larger ones (mean diameter 7 to 12 nm depending on the silver loading). The photocatalytic properties of Ag-modified TiO2 have been studied for...
-
Time-scale modification of speech signals for supporting hearing impaired schoolchildren
PublicationA study of time scale modification algorithmsapplied to hearing impaired schoolchildren supporting ispresented. Variety of algorithms are considered, namely:overlap and add, two variations of synchronized overlapand add, and the phase vocoder. Their effectiveness as wellas real-time processing capabilities are examined.
-
Bulk-Surface Modification of Nanoparticles for Developing Highly-Crosslinked Polymer Nanocomposites
PublicationSurface modification of nanoparticles with functional molecules has become a routine method to compensate for diffusion-controlled crosslinking of thermoset polymer composites at late stages of crosslinking, while bulk modification has not carefully been discussed. In this work, a highly-crosslinked model polymer nanocomposite based on epoxy and surface-bulk functionalized magnetic nanoparticles (MNPs) was developed. MNPs were...
-
A few words on the modification of the ruling in the part concerning compensatory damages
Publication -
Modification of titanium dioxide with platinum ions and clusters: application in photocatalysis
PublicationW celu polepszenia właściwości fotokatalitycznych, TiO2 (komercyjny-P25 oraz syntezowany metoda zol-żel) był domieszkowany za pomocą jonów lub klasterów [Pt3(CO)6]62- platyny. Własności fizyczne fotokatalizatorów były badane za pomocą elektronowego mikroskopu transmisyjnego (TEM), dyfraktometru rentgenowskiego (XRD) oraz analizatora powierzchni właściwej (BET). Dyfuzyjna spektrometria odbiciowa (DRS) została zastosowana w celu...
-
Hydrothermal, microwave and mechanochemical modification of amorphous zirconium phosphate structure
Publication -
Modification of Tin Phosphate Nanoporous Structure under Hydrothermal Conditions
Publication -
Modification of SiC based nanorods via a hydrogenated annealing process
Publication -
Oxidative Modification of Proteins in Pediatric Cystic Fibrosis with Bacterial Infections
Publication -
Computer-assisted enzyme engineering by modification of tunnels, channels and gates
Publication -
METHODS OF THE MODIFICATION OF VEGETABLE OILS IN ORDER TO OBTAIN BASE OILS
Publication -
Automatic prosodic modification in a Text-To-Speech synthesizer of Polish language
PublicationPrzedstawiono system syntezy mowy polskiej z funkcją automatycznej modyfikacji prozodii wypowiedzi. Opisane zostały metody automatycznego wyznaczania akcentu i intonacji wypowiedzi. Przedstawiono zastosowanie algorytmów przetwarzania sygnału mowy w procesie kształtowania prozodii. Omówiono wpływ zastosowanych modyfikacji na naturalność brzmienia syntezowanego sygnału. Zastosowana metoda oparta jest na algorytmie TD-PSOLA. Opracowany...
-
Proposition of aerial laser survey point cloud methodology modification
PublicationW rozdziale monografii autorzy sugerują nowe rozwiązanie - modyfikację metodologii analizy chmury punktów pozyskanej ze skaningu lotniczego w technologii LIDAR. Modyfikacja polega na poprzedzeniu procesu filtracji realizowanego w ETAPIE PRZETWARZANIA WSTĘPNEGO, algorytmem optymalizacji [Błaszczak 2006, Błaszczak, Kamiński 2007]. Głównym celem badań była kontrola wiarygodności i efektywności metodologii opracowania chmury punktów...
-
On the use of instantaneous complex frequency for analysis and modification of simple sounds
PublicationW pracy przedstawiono możliwości wykorzystania zespolonej pulsacji chwilowej do analizy i modyfikacji prostych dźwięków. Opisywany algorytm składa się z dwóch kroków: bifaktoryzacji sygnału na obwiednię minimalnofazową i fazor dodatnipskrętny, a następnie estymacja i modyfikacja zespolonej pulsacji chwilowej obu czynników faktoryzacji.
-
Multi-objective optimization for assessment of topological modification in UWB antennas
PublicationThis paper addresses an issue of systematic and rigorous assessment of effects of topological modifications on the performance of compact UWB antennas. Application of fast surrogate-assisted multi-objective optimization procedures allows us for obtaining, in a practically acceptable timeframe, a set of designs representing the best possible trade-offs between conflicting objectives (here, antenna size minimization and reduction...
-
Modification of titanium dioxide towards photocatalytic activity in visible light
Publication.
-
A simple modification of PCR thermal profile applied to evade persisting contamination
PublicationThe polymerase chain reaction (PCR), one of the most commonly applied methods of diagnostics and molecular biology has a frustrating downside known as the false positive signal or contamination. Several solutions to avoid and to eliminate PCR contaminations have been worked out to date but the implementation of these solutions to laboratory practice may be laborious and time consuming. A simple approach to circumvent the problem...
-
Design of a test bench for determining the general characteristics of an internal combustion engine using a hydraulic power take-off system
PublicationThe paper presents a design of an engine test bench, which is used to determine the general characteristics of a truck engine using a power take-off (PTO). PTO drives a hydraulic system that generates a load on the engine at various points in its operation in the power range specified by the hydraulic system. The design allows for stationary and mobile tests with the test bench mounted on the truck, without any modification of...
-
Synthesis and modification of reduced graphene oxide aerogels for biofuel cell applications
PublicationWe have carried out the preparation of reduced graphene oxide aerogels using eco-friendly method that is based on the Hummers method of graphite oxidation without the use of NaNO3 that produces toxic gases. To obtain a porous 3D structure of reduced graphene oxide, we performed the hydrothermal reduction at elevated temperature. We also prepared the rGO aerogel/CNT composite using multiwalled carbon nanotubes as linkers. The rGO...
-
Influence of Laser Modification on the Surface Character of Biomaterials: Titanium and Its Alloys—A Review
PublicationLaser surface modification is a widely available and simple technique that can be applied to different types of materials. It has been shown that by using a laser heat source, reproducible surfaces can be obtained, which is particularly important when developing materials for medical applications. The laser modification of titanium and its alloys is advantageous due to the possibility of controlling selected parameters and properties...
-
Influence of Laser Modification on the Surface Character of Biomaterials: Titanium and Its Alloys—A Review
PublicationLaser surface modification is a widely available and simple technique that can be applied to different types of materials. It has been shown that by using a laser heat source, reproducible surfaces can be obtained, which is particularly important when developing materials for medical applications. The laser modification of titanium and its alloys is advantageous due to the possibility of controlling selected parameters and properties...
-
Effectiveness of a dual surface modification of metallic interconnects for application in energy conversion devices
PublicationA dual surface modification of an SOFC metallic interconnect with a Gd2O3 layer and an MnCo2O4 coating was evaluated. The tested samples were oxidized for 7000 h in air at 1073 K. Oxidation products were characterized using XRD, SEM-EDS, and confocal Raman imaging, and ASR was measured. The effect of gadolinium segregation at grain boundaries in Cr2O3 was evaluated using S/TEM-EDS. Area specific-resistance was measured and fuel...
-
Reduced-cost design closure of antennas by means of gradient search with restricted sensitivity update
PublicationDesign closure, i.e., adjustment of geometry parameters to boost the performance, is a challenging stage of antenna design process. Given complexity of contemporary structures, reliable parameter tuning requires numerical optimization and can be executed using local algorithms. Yet, EM-driven optimization is a computationally expensive endeavour and reducing its cost is highly desirable. In this paper, a modification of the trust-region...
-
Modification of Selected Propagation Models in Terms of Path Loss Estimation in Container Terminal
PublicationIt is particularly important to look for any propagation model that could be useful for designing mobile radio networks in container terminal environment. Selected propagation models have been investigated. Firstly - basing on measurements results - they have been evaluated in this scope and the analysis has shown, that the adjustment is needed. This modification improved significantly the accuracy of path loss modelling. For the...