Search results for: PROCESS HEAT
-
Pro-death signaling of cytoprotective heat shock factor 1: upregulation of NOXA leading to apoptosis in heat-sensitive cells
Publication -
Design and Thermodynamic Analysis of Waste Heat-Driven Zeolite–Water Continuous-Adsorption Refrigeration and Heat Pump System for Ships
Publication -
Co-simulation strategy of transient CFD and heat transfer in building thermal envelope based on calibrated heat transfer coefficients
PublicationThe paper presents a strategy to develop a fully transient numerical model of a heat transfer in building, using a transient CFD model of indoor air and a thermal envelope model, running in a co-simulation. The strategy relies on the utilization of RANS with a high-Re turbulence model and a wall function, which enables to use a coarse computational mesh limiting the computational time. Since wall functions give invalid heat transfer...
-
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
PublicationThe friction stir welding (FSW) of tool pin geometry plays a critical role in the final properties of the produced joint. The tool pin geometry directly affects the generation of heat and the flow of internal materials during the FSW process. The effects of the FSW tool pin angle on heat generation and internal flow have not been quantitatively investigated in detail. In this manuscript, a validated Computational Fluid Dynamic...
-
Process Control of Biogas Purification Using Electronic Nose
PublicationNowadays, biogas produced from landfills and wastewater treatment plants or lignocellulosic biomass is important sustainable and affordable source of energy. Impurities from biogas stream can cause a serious odor problem, especially for residents of areas immediately adjacent to production plants. Therefore, biogas pre-treatment is necessary to protect engines that convert biogas into energy and in order to increase the specific...
-
A study of flow boiling heat transfer in minichannels
PublicationW pracy przedstawiono badania eksperymentalne wrzenia w przepływie w minikanale o średnicy wewnętrznej 2.3mm i długości 38cm. Uzyskano rozłady temperatury wzdłuż ścianki kanału oraz lokalne współczynniki przejmowania ciepła. Dane skorelowano z korelacją półempiryczną uzyskując zadowalającą zgodność.
-
Heat transfer phenomena of glassy carbon foams
Publication -
Edge effects for heat flux in fibrous composites
Publication -
The impact of nozzle configuration on the heat transfer coefficient
Publication -
Network heat is the comfort in winter and summer - TRIGENERATION
PublicationPrzedstawiono międzynarodowe uwarunkowania prawne oraz techniczne stosowania kogeneracji w aspekcie wykorzystania ciepła sieciowego na potrzeby ogrzewania i klimatyzacji obiektów.
-
Modelling of convective heat transfer in flow boiling.
PublicationW pracy przedstawiono rozważania dotyczące modelowania przepływu z wrzeniem w zastosowaniu do kanałów o małej średnicy. Stwierdzono,że stosowanie korelacji obowiązujących dla średnic konwencjonalnych nie sprawdza się z praktyką w przypadku małych średnic.
-
Transient operation analysis of a regenerative heat exchanger.
PublicationReferat dotyczy problemu niestacjonarnej pracy wymiennika regenearcyjnego.Przedstawiono w nim uproszczony model matematyczny pozwalający oszacować w sposób ilościowy wielkość stałych czasowych wymiennika.
-
Heat transfer augmentation using liquid crystal
PublicationPraca przedstawia zastosowanie techniki wizualizacji ciekłokrystalicznej dobadań wymiany ciepła na płaskiej powierzchni z zaburzaczami. Folia ciekło-krystaliczna została umieszczona na powierzchni, aby określić przebieg izoterm. Obraz rejestrowano kamerą JVC, a następnie analizowano komputerowo. Procedura eksperymentalna pozwala na otrzymanie pełnej informacji dotyczącej wymiany ciepła (na powierzchni płaskiej z elementami ustawionymi...
-
Green function diagonal for a class of heat equations
PublicationA construction of the heat kernel diagonal is considered as element of generalized zeta function theory, which gradient at the origin defines determinant of a differential operator in a technique for regularizing quadratic path integral. Some classes of explicit expressions of the Green function in the case of finite-gap potential coefficient of the heat equation are constructed. An algorithm and program for Mathematica are presented...
-
Thermohydraulic maldistribution reduction in mini heat exchangers
PublicationA detailed numerical investigation has been carried out to analyze the flow maldistribution in 50 parallel 1 mm × 1 mm rectangular minichannels and 1 mm depth minigap section with rectangular, trapezoidal, triangular or concave manifolds in Z-type flow configuration. The working medium was ethanol and the mass flow rate was 5 × 10−4 kg/s. Both sections were heated from the bottom side. Heat flux of 10 000 W/m2 and 5000 W/m2 was...
-
Modelling of heat transfer in supercritical pressure recuperators
PublicationIn the paper presented is analysis of convective flow heat transfer at supercritical pressure in channels of heat exchanger working in the thermodynamic cycle. The modelling is based on the division of the flow into three regions, namely the heavy fluid, a two phase flow consisting of the heavy and light fluids and finally the light fluid flow. Modelling is concentrated on the region of simultaneous flow of two fluids divided into...
-
Cargo ships heat demand - operational experiment
PublicationThe paper presents the results of an experiment conducted on two cargo ships – a 5300 TEU container with a steam heating system and a 7500 dwt general cargo ship with a thermal oil system. On both ships research has been carried out using specially designed measuring equipment. After gathering data about flow velocity and temperatures (steam/ cooling water/ thermal oil/ seawater/ outside air), calculations have been done, resulting...
-
Evaluating the influence of radiative heat flux on convective heat transfer from a vertical plate in air using an improved heating plate
PublicationThis article examines the influence of radiative heat flux on the accuracy of the results of free convective heat transfer in air. In order to carry out these tests, based on the experience gained during the operation of a plate heated on one side, compensated by a reverse heat loss flux counter-heater, a unique double-sided heating sandwich plate was designed and built, consisting of three thin epoxy resin plates reinforced with...
-
An experimental investigation on the effect of new continuous core-baffle geometry on the mixed convection heat transfer in shell and coil heat exchanger
PublicationIn the article, the authors presented the influence of continuous core-baffle geometry at mixed convection heat transfer in shell and coil heat exchanger. Experiments were carried out for a large power range, i.e. from 100W to 1200W and mass flow rates ranging from 0.01 kg/s to 0.025 kg/s. During the experiments, the mass flow rate of cooling water, the temperature of water at the inlet and outlet as well as the wall temperature...
-
Thermodynamic analysis of the Compressed Air Energy Storage system coupled with the Underground Thermal Energy Storage
PublicationImprovement of flexibility is one of the key challenges for the transformation of the Polish Power System aiming at a high share of renewable energy in electricity generation. Flexible and dispatchable power plants will contribute to this ongoing transformation process as they compensate for fluctuations in electricity generation from renewable energy sources such as wind and photovoltaics. In this context, CAES storage tanks are...
-
The influence of thermal treatment on electrocatalytic properties of Mn-Co nanofilms on nickel foam toward oxygen evolution reaction activity
PublicationThis work evaluates electrodeposited and differently treated Mn-Co catalysts for their oxygen evolution reaction activity. Catalysts are evaluated in the as-deposited and heat treated state: after 350 C and 600 C. Results show that the highest electrochemical activity is obtained for the as-deposited Mn-Co oxyhydroxide, which possibly possess a layered double hydroxide structure. After the heat treatment process, especially after...
-
The structure of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides measured with X-ray diffraction method
Open Research DataThe structure of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides was measured by XRD.
-
Effect of Pin Shape on Thermal History of Aluminum-Steel Friction Stir Welded Joint: Computational Fluid Dynamic Modeling and Validation
PublicationThis article studied the effects of pin angle on heat generation and temperature distribution during friction stir welding (FSW) of AA1100 aluminum alloy and St-14 low carbon steel. A validated computational fluid dynamics (CFD) model was implemented to simulate the FSW process. Scanning electron microscopy (SEM) was employed in order to investigate internal materials’ flow. Simulation results revealed that the mechanical work...
-
Influence of process of straightening ship hull structure made of 316L stainless steel on corrosion resistance and mechanical properties
PublicationThe AISI 316L type steel belongs to the group of chromium-nickel stainless steels. They are determined according to European standards as X2CrNiMo17-12-2 and belong to the group of austenitic stainless steels. Steels of this group are used for elements working in seawater environments, for installations in the chemical, paper, and food, industries, for architectural elements, and many others. The chemical composition of corrosion-resistant...
-
Thermal heat-balance mode flow-to-frequency converter
Publication -
Heat and mass transfer in air-fed pressurised suits
PublicationOpisano konieczność modelowania transportu masy i ciepła w kombinezonach ochronnych. Omówiono różne sposoby modelowania wymiany ciepła, łącznie ze sprzężoną wymianą ciepła. Uwzględniono również ludzki metabolizm i turbulentne mechanizmy wymiany masy i ciepła. Publikacja opisuje również sposób modelowanie turbulentnych przepływów wieloskładnikowych. Pokazano również porównanie obliczeń z eksperymentem.
-
Selected aspects of heat recovery simulation in houseboat installations
Publication -
Heat Source Models in Numerical Simulations of Laser Welding
Publication -
The effect of heat treatment of hardwood on the specific cutting resistance
PublicationW pracy przedstawiono wyniki badań mocy skrawania podczas przecierania modyfikowanego i niemodyfikowanego termicznie drewna dębowego i jesionowego na pilarce ramowej PRW15M. W pierwszym etapie badań, graniakowe próbki drewna dębowego i jesionowego były modyfikowane termicznie za pomocą przegrzanej pary (temperatura 197C, czas 4 h) w parzelni wysokotemperaturowej, w warunkach przemysłowych. Następnie, wyznaczono właściwe powierzchniowe...
-
Heat and mass transfer in air-fed pressurised suits
PublicationOpisano konieczność modelowania transportu masy i ciepła w kombinezonach ochronnych. Omówiono różne sposoby modelowania wymiany ciepła, łącznie ze sprzężoną wymianą ciepła. Uwzględniono również ludzki metabolizm i turbulentne mechanizmy wymiany masy i ciepła. Publikacja opisuje również sposób modelowanie turbulentnych przepływów wieloskładnikowych. Pokazano również porównanie obliczeń z eksperymentem.
-
Determining heat transfer coefficients using evolutionary alogrithms
PublicationPokazano sposób kalibracji współczynnika wymiany ciepła za pomocą algorytmów ewolucyjnych. Wykorzystano tu minimalizację błędu między pomiarami a obliczeniami. Pokazano dwie metody optymalizacji: wielokryterialną i jednokryterialną.
-
Evaluation of technical efficiency of heat and electric power generation
PublicationThis paper presents an evaluation of technical efficiency and time-dependent changes in productivity of Polish professional electric power and heat&electric power stations by using Data Envelopment Analysis non-parametric method. The research covered the enterprises whose total available electric power amounted to about 98% of that of all professional thermal electric power stations in this country. The analysis has concerned...
-
Heat tint colours on stainless steel and welded joints
PublicationSurface layer condition of stainless steels and welded joints influences strongly their corrosion resistance. This problem seems to be underestimated. This current study explains the phenomenon of heat tint forming on welds, the methods of its removal, inspection procedures after heat tint removing and post weld finishing
-
HIGH TEMPERATURE HEAT PUMPS – PERSPECTIVE HEATING SYSTEMS?
PublicationIn the paper presented are authors own concepts of high temperature compressor heat pumps for the utilisation of medium and low temperature sources of heat. Working fluids for use in high temperature heat pumps are discussed, as well as the criteria for their selection. Analyses are presented for the production of in the upper steam source at 130 °C. One-stage systems and cascade systems were analyzed. An analysis of the coefficient...
-
Gas boiler as a heat source for the domestic micro-CHP
PublicationThis analysis considers a commercially available domestic gas boiler as a heat source for a domestic organic Rankine cycle system. An experimental study was made into the applicability of the gas boiler (De Dietrich with thermal power 25 kW) coupled with the laboratory prototype micro ORC setup. The main aim of the study is to determine the working fluid temperature, attainable heat rates and effciencies of the whole system. Preliminary...
-
The methods of heat recovery in air conditioning and ventilation systems
PublicationPrzedstawiono wybrane metody i urządzenia do odzysku ciepła takie jak: recyrkulacja, regeneratory obrotowe, rekuperatory, rurki cieplne,układy z czynnikiem pośredniczącym, pompy ciepła oraz układy hybrydowe. Przedyskutowano podstawowe kryteriium oceny odzysku ciepła oraz efektywność cieplną wymiennika w układzie odzysku ciepła.
-
The effect of heat exchanger geometry on adsorption chiller performance
Publication -
Heat transfer in fluidized and fixed beds of adsorption chillers
Publication -
Analysis of heat transfer in a coated bed of an adsorption chiller
Publication -
Heat transfer augmentation visualized by liquid crystal thermography
PublicationW pracy przedstawiono możliwości wykorzystania termografii ciekłokrystalicznej do badań wymiany ciepła oraz wizualizacji pola przepływu w elementach urządzeń przemysłowych.
-
Influence of the heat treatment on corrosion characteristics of the Superston alloy
PublicationW artykule przedstawiono wpływ hartowania i odpuszczania na twardość i właściwości korozyjne stopu Superston, stosowanego na śruby okrętowe. Stwierdzono, iż hartowanie z temperatury 900 st.C i odpuszczanie w temperaturze 550 st.C znacząco podwyższa odporność na korozję stopu Superston w 3% roztworze NaCl w porownaniu ze stanem odlanym.
-
Korozja rur ciepłowniczych = Heat water tubes corrosion
PublicationZbadano uszkodzenia korozyjne instalacji ciepłowniczej w aspekcie jakości rur zgrzewanych i korozyjności wody sieciowej. Rury przewodowe ze stali niskowęglowej zostały zniszczone przez korozję wżerową/podosadową zlokalizowaną w obszarze połączenia zgrzewanego wskutek nieodpowiedniej jakości wody.
-
Convective heat transfer inside hemispherical reflective concentrator.
PublicationW pracy przedstawiono uproszczone rozwiązanie analityczne, obliczenia numeryczne wykonane za pomocą programu FLUENT/UNS i wyniki badań eksperymentalnych swobodnej konwekcyjnej wymiany ciepła wewnątrz izotermicznej powierzchni kołowej w przestrzeni nieograniczonej. Wykonane obserwacje bezpośrednie konwekcyjnych struktur przepływu, jak i wyniki obliczeń numerycznych otrzymane w postaci pola prędkości i linii prądu wewnątrz...
-
Hydrodynamics and heat transfer in bubbly flow in the turbulent boundarylayer
PublicationW pracy przedstawiono oryginalne podejście do modelowania przepływu pęcherzykowego w warstwie przyściennej i w kanale. Podejście oparte jest na sumowaniu energii dyssypacji pochodzącej od przepływu ścinającego w kanale oraz dyssypacji pochodzącej od obecności pęcherzyków. W wyniku otrzymuje się naprężenia styczne ekwiwalentnego przepływu jednofazowego. Zaproponowano własne podejście do modelowania stopnia zapełnienia opisane równaniem...
-
Thermochromic liquid crystals applied for heat transfer research
PublicationAutorzy opisali własne wieloletnie doświadczenia z badań wymiany ciepła, w których wykorzystali termochromatyczne ciekłe kryształy. Obejmowały one badania przepływów w kanałach o różnorakiej konfiguracji, badania w przestrzeniach zamkniętych oraz podczas zmiany stanu skupienia badanego płynu.
-
Geothermal heating plant with a combustion engine heat pump.
PublicationPrzedstawiono koncepcję ciepłowni geotermalnej zagospodarowującej zasoby energii zawarte w nisko i średniotemperaturowej wodzie termalnej. W tym celu zaproponowano zastosowanie pompy grzejnej napędzanej silnikiem spalinowym.
-
The use of thermochromic liquid crystals in heat transfer research
PublicationW ostatnich latach ciekłe kryształy zostały z powodzeniem zastosowane do wizualizacji pola temperatury w stanach ustalonych i przejściowych na różnych powierzchniach. Analiza otrzymanych obrazów początkowo była skomplikowana, ale dzięki zastosowaniu obróbki komputerowej pomiary stały się o wiele dokładniejsze i szybsze. W opracowaniu przedstawiono przegląd badań, w których zastosowano automatyczną technikę analizy obrazów, a prowadzone...
-
Natural convective heat transfer from isothermal cuboids
PublicationPrzestawiono rozważania teoretyczne i wyniki badań eksperymentalnych konwekcyjnej wymiany ciepła od powierzchni izotermicznego prostopadłościanu. W rozwiązaniu analitycznym uwzględniono pełną długość warstwy przyściennej i sposób jej rozchodzenia się wzdłuż powierzchni prostopadłościanu. W celu zweryfikowania otrzymanego rozwiązania przeprowadzono badania eksperymentalne w trzech możliwych położeniach bryły. Zaproponowano uniwersalną...
-
The effect of temperature difference on heat transport in solar cells
PublicationW pracy omówiono wpływ wzrostu temperatury i mechanizm transportu ciepła na drodze przewodzenia w układach hybrydowych PV/T. Wyznaczono współczynniki przewodzenia krystalicznego krzemu typu n i p oraz gęstość strumienia ciepła w zakresie temperatur od 0 do 100 st. C.
-
Natural convective heat transfer from isothermal cuboids
PublicationThe paper presents results of theoretical and experimental investigations of the convective heat transfer from isothermal cuboid. The analytical solution was performed taking into account complete boundary layer length and the manner of its propagation around isothermal cuboid. It arises at horizontal bottom surface and grows on vertical lateral surface of the block. After changing its direction, the boundary layer occurs above...