displaying 1000 best results Help
Search results for: MICROWAVE/RF CIRCUIT
-
A New Microwave Ceramic – Polymer Composite with 0-3 Connectivity
PublicationGoal of the present research was to fabricate and study two-phase BiNbO4//PVDF composites with 0-3 connectivity. Such composite consists of there-dimensionally connected polymer matrix loaded with dielectric ceramic particles. In the present case BiNbO4 powder acted as an active phase (dispersed phase) whereas polyvinylidene fluoride (PVDF) acted as a non-active (passive) phase (matrix). BiNbO4//PVDF composites with the volume...
-
Design and Microwave-Assisted Synthesis of TiO2-Lanthanides Systems and Evaluation of Photocatalytic Activity under UV-LED Light Irradiation
PublicationThe TiO2-Eu and TiO2-La systems were successfully synthesized using the microwave method. Based on the results of X-ray diffraction analysis, it was found that regardless of the analyzed systems, two crystal structures were noted for the obtained samples: anatase and rutile. The analysis, such as XPS and EDS, proved that the doped lanthanum and europium nano-particles are present only on the TiO2 surface without disturbing the...
-
Assessing the Operation System of Fire Alarm Systems for Detection Line and Circuit Devices with Various Damage Intensities
Publication -
EGATEC: A new high-resolution engineering model of the global atmospheric electric circuit—Currents in the lower atmosphere
Publication -
Piotr Sypek dr inż.
PeoplePiotr Sypek received the M.S.E.E. and Ph.D. degrees (with hons.) in microwave engineering from the Gdańsk University of Technology, Gdańsk, Poland, in 2003 and 2012, respectively. He was involved in the design and implementation of parallel algorithms for the formulation and solution of electromagnetic problems executed on CPUs (workstations and clusters) and GPUs. His current research interests include parallel processing in computational...
-
Adrian Bekasiewicz dr hab. inż.
PeopleAdrian Bekasiewicz received the MSc, PhD, and DSc degrees in electronic engineering from Gdansk University of Technology, Poland, in 2011, 2016, and 2020, respectively. In 2014, he joined Engineering Optimization & Modeling Center where he held a Research Associate and a Postdoctoral Fellow positions, respectively. Currently, he is an Associate Professor with Gdansk University of Technology, Poland. His research interests include...
-
Microwave-assisted hydrothermal synthesis and electrochemical studies of α- and h-MoO3
Publication -
Microwave plasma application in decomposition and steam reforming of model tar compounds
Publication -
Paramagnetism of cobalt-doped ZnO nanoparticles obtained by microwave solvothermal synthesis
Publication -
Size control mechanism of ZnO nanoparticles obtained in microwave solvothermal synthesis
Publication -
Book review: Simulation-Driven Design Optimisation and Modelling for Microwave Engineering
PublicationCelem książki jest przedstawienie aktualnego stanu badań dotyczących projektowania układów mikrofalowych poprzez modelowanie i optymalizacje wspomagane symulacjami elektromagnetycznymi. Grupa międzynarodowych ekspertów zajmujących się rożnymi aspektami komputerowo wspomaganego projektowania układów mikrofalowych, podsumowuje i dokonuje przeglądu ostatnich osiągnięć w tej dziedzinie oraz przedstawia szereg praktycznych zastosowań....
-
Accurate modelling of microwave structures using shape-preserving response prediction
PublicationArtykuł prezentuje metodologię dokładnego modelowania struktur mikrofalowych. Jest to zmodyfikowana wersja techniki opartej na procedurze przewidywania odpowiedzi z zachowaniem kształtu (shape-preserving response prediction, SPRP), która oszacowuje odpowiedź struktury mikrofalowej otrzymanej poprzez kosztowną obliczeniowo symulację elektromagnetyczną za pomocą taniego obliczeniowo modelu tejże struktury. Modyfikacja polega na wykorzystaniu...
-
Inspection of protective linings using microwave spectroscopy combined with chemometric methods
PublicationOpisano nowa niedestrukcyjna metodę kontroli jakości nowych wykładzin ochronnych na podłożu metalowym oraz oceny ich stanu w trakcie eksploatacji przy zastosowaniu spektroskopii mikrofalowej w szerokim zakresie częstotliwości od 6,5 do 13 GHz. Uzyskane dane pomiarowe dodane zostały obróbce chemometrycznej w celu redukcji ilości danych doświadczalnych i wizualizacji rezultatów. Przedstawiono podstawy teoretyczne metody oraz wyniki...
-
Hybrid analysis of microwave components in cylindrical coordinates with function expansion in subdomains.
PublicationW artykule zaproponowano wydajną metodę przyspieszenia analizy FDTD, poprzez podział dziedziny obliczeniowej i zastosowanie różnych algorytmów w różnych elementach dziedziny. Zaproponowano uniwersalną metodę łączenia techniki PEE (Partial Eigenfunction Expansion)i niezmodyfikowanej FDTD w jednej analizie. Uzyskano redukcję liczby zmiennych oraz wydłużenie kroku czasowego.
-
Low order autoregressive (AR) models for FDTD analysis of microwave filters.
PublicationArtykuł opisuje zastosowanie modeli AR w celu poprawy efektywności analizy struktur filtrujących metodą różnic skończonych w dziedzinie czasu (FD-TD). Opisanych jest szereg kryteriów pozwalających na automatyczne tworzenie modeli AR sygnałów czasowych, w tym wybór fragmentu odpowiedzi układu stanowiący podstawę ekstrakcji współczynników modelu, współczynnika decymacji oraz rzędu modelu. Skuteczność wprowadzonych kryteriów...
-
An automated microwave planar filter design based on space mapping optimization
Publication -
Inrush and short circuit current identification based on real-time spectral analysis with the use of the FPGA FFT processor
PublicationW artykule przedstawiono krótkookresową analize widmową prądu załączeniowego i prądu zwarciowego transformatora w czasie rzeczywistym z zastosowaniem procesora FFT zrealizowanego w FPGA. Otrzymane widmo ułatwia rozróżnienie rodzaju prądu, co może być zastosowanei do lepszego sterowania zabezpieczneiem różnicowo-prądowym. Określono tez teoretyczne przebiegi prądów dla przyjetego modelu transformatora. Przeprowadzono ponadto analizę...
-
Isolation of the relative decrease in magnetic permeability contribution to reluctance of an open magnetic circuit based on stray field measurements
PublicationThe goal of the study was to evaluate a relative decrease in magnetic permeability in open magnetic circuits based on stray magnetic field measurements. The boundary element method was used to simulate magnetic circuits with variable geometry and variable magnetic permeability. The simulated magnetic circuits were rectangular or bone-shaped flat samples. Reluctance was increased in the middle of the samples resulting in leakage...
-
Rapid method for the determination of organochlorine pesticides and PCBs in fish muscle samples by microwave-assisted extraction and analysis of extracts by GC-ECD
PublicationA procedure for the multiresidue determination of organochlorine pesticides and polychlorinated biphenyls in fish muscle samples has been developed. The method is based on the microwave-assisted extraction (MAE) of food samples from an acetonitrile-water (95 + 5, v/v) mixture followed by SPE cleanup of the extracts and analysis by GC with an electron capture detector. MAE operational parameters, such as the extraction solvent,...
-
Size Control of Cobalt-Doped ZnO Nanoparticles Obtained in Microwave Solvothermal Synthesis
Publication -
Current Trends in the Development of Microwave Reactors for the Synthesis of Nanomaterials in Laboratories and Industries: A Review
Publication -
A Review of Microwave Synthesis of Zinc Oxide Nanomaterials: Reactants, Process Parameters and Morphologies
Publication -
Removal of metal particles from carbon nanotubes using conventional and microwave methods
Publication -
High Q-factor Microwave Fabry-Perot Resonator With Distributed Bragg Reflectors
PublicationZrealizowany został rezonator Fabry-Perot pracujący na częstotliwości 39 GHz i wykorzystujący dwie pary ćwierćfalowych kwarcowych reflektorów Bragga. Dla fali o długości 98.26 mm otrzymano dobroć ok. 560,000, co oznacza 4.3-krotny wzrost w porównaniu z identycznym rezonatorem bez reflektorów Bragga. Analizę problemu wykonano przy pomocy metody różnic skończonych w dziedzinie częstotliwości (FDFD) i porównano z uproszczonym rozwiązaniem...
-
Compatible DC and small-signal MOSFET models for radio and microwave frequency simulation
PublicationZaprezentowano nowy model stałoprądowy tranzystora MOS i kompatybilny z nim uogólniony nie-quasi-statyczny model małosygnałowy. Model stałoprądowy został eksperymentalnie zweryfikowany dla tranzystorów MOS o długości kanału od 75 nm do kilkunastu mikrometrów, a model małosygnałowy od zera herców do 30 GHz.
-
Operational System Modelling in a Focused Fire Alarm System with an Open and Signal Detection Circuit Supervising Railway Station Premises
Publication -
New model simulations of the global atmospheric electric circuit driven by thunderstorms and electrified shower clouds: The roles of lightning and sprites
Publication -
Low-power microwave-induced fabrication of functionalised few-layer black phosphorus electrodes: A novel route towards Haemophilus Influenzae pathogen biosensing devices
PublicationIn this paper, various passivation schemes were applied at few-layer black phosphorus (FLBP) to achieve covalent functionalisation with 4-azidobenzoic acid, improving its electrochemical response intended for analytical and biosensing applications. The thermal and microwave assisted modification procedures in toluene and dime-thylformamide resulted in high reversibility of reactions on functionalised FLBP using a ferricyanide/ferrocya-nide...
-
Efficient optimization approaches for microwave assisted extraction of high-quality antioxidant compounds from Salvia officinalis L.: UHPLC-HRMS differential analysis of phenolic profiles obtained by ultrasound and microwave extraction
PublicationThe study aims to optimize MAE of total phenolic compounds (TPC) and antioxidant capacity from Salvia officinalis L. leaves using a definitive screening design (DSD) and I-optimal design. UHPLC-HRMS analysis was used to identify and compare the composition of MAE and UAE optimal extracts. The results showed that DSD and I-optimal design were successfully applied for the optimization of MAE targeting phenolics and other antioxidants...
-
Chemical and biological characterization of Ocimum basilicum L. phenolic extract and essential oil derived through ultrasound and microwave-assisted extraction techniques
PublicationPlant-derived bioactive molecules are increasingly utilized in food processing as natural additives, driven by a growing interest in healthier lifestyles. This trend has spurred industries to reformulate products to meet the demands of health-conscious consumers. This study investigates the phenolic extract and essential oil of O. basilicum L. obtained via ultrasound-assisted extraction and microwave-assisted extraction, respectively. Characterization...
-
Microwave absorption study on (Bi, Pb)-Sr-Ca-Cu-O granular superconductors
PublicationNadprzewodniki granulaste są bardzo ciekawymi materiałami dzięki temu, że zawierają dużą ilość złącz Josephsona. W pracy przedstawiono absorpcję mikrofalową w granulastych nadprzewodnikach (Bi, Pb)-Sr-Ca-Cu-O zawierających granule 2201, 2212 i 2223 umieszczone w matrycy dielektrycznej. Obserwowano dwustopniowe przejście do stanu nadprzewodzącego. Sygnał MMMA obserwowano poniżej temperatury T1.
-
Microwave Assisted Liquefaction with Crude Glycerol as a Potential Method of Brewer’s Spent Grain Utilization
Publication -
Shape control over microwave hydrothermally grown Y2O3:Eu by europium concentration adjustment
Publication -
Reduction of Tb4+ ions in luminescent Y2O3:Tb nanorods prepared by microwave hydrothermal method
Publication -
Microwave-assisted preparation of Li3V2(PO4)3/C composite with high-rate capacity
Publication -
A new approach for the extraction of tetracyclines from soil matrices: application of the microwave-extraction technique
Publication -
Lyotropic liquid crystal based on zinc oxide nanoparticles obtained by microwave solvothermal synthesis
Publication -
Reduced-cost surrogate modelling of compact microwave components by two-level kriging interpolation
PublicationFull-wave electromagnetic (EM) analysis is a versatile tool for evaluating the performance of high-frequency components. Its potential drawback is its high computational cost, inhibiting the execution of EM-driven tasks requiring massive simulations. The applicability of equivalent network models is limited owing to the topological complexity of compact microstrip components because of EM cross-coupling effects. Development of...
-
A Generalized SDP Multi-Objective Optimization Method for EM-Based Microwave Device Design
PublicationIn this article, a generalized sequential domain patching (GSDP) method for efficient multi-objective optimization based on electromagnetics (EM) simulation is proposed. The GSDP method allowing fast searching for Pareto fronts for two and three objectives is elaborated in detail in this paper. The GSDP method is compared with the NSGA-II method using multi-objective problems in the DTLZ series, and the results show the GSDP method...
-
Multi-Fidelity Local Surrogate Model for Computationally Efficient Microwave Component Design Optimization
PublicationIn order to minimize the number of evaluations of high-fidelity (“fine”) model in the optimization process, to increase the optimization speed, and to improve optimal solution accuracy, a robust and computational-efficient multi-fidelity local surrogate-model optimization method is proposed. Based on the principle of response surface approximation, the proposed method exploits the multi-fidelity coarse models and polynomial interpolation...
-
Microwave assisted liquefaction with crude glycerol as a potential method of brewer's spent grain utylization
PublicationBrewer's spent grain was applied as a low-cost industrial type of lignocellulose biomass in a liquefaction and solvent: biomass ratio on the efficiency of the process, chemical structure and basic properties of obtained prepared polyols and soil residues shed light on the biomass degradation mechanism through application of microwaves and further reaction of degradation products with solvent particles.
-
Effects of lightning and sprites on the ionospheric potential, and threshold effects on sprite initiation, obtained using an analog model of the global atmospheric electric circuit
Publication -
Luminescence enhancement in nanocrystalline Eu2O3 nanorods – Microwave hydrothermal crystallization and thermal degradation of cubic phase
Publication -
Influence of mechanochemical and microwave modification on ion-exchange properties of tin dioxide with respect to uranyl ions
Publication -
Development of New UV–vis Spectroscopic Microwave-Assisted Method for Determination of Glucose in Pharmaceutical Samples
Publication -
Structural and Magnetic Properties of Co‒Mn Codoped ZnO Nanoparticles Obtained by Microwave Solvothermal Synthesis
Publication -
Spectroscopic study of atmospheric pressure 915 MHz microwave plasma at high argon flow rate
Publication -
Microwave-Reactor-Based Preparation of Red Iron Oxide Pigment from Waste Iron Sulfate
Publication -
A non-quasi-static small-signal model of the four-terminal MOSFET for radio and microwave frequencies.
PublicationW pracy zaprezentowano nowy małosygnałowy model tranzystora MOS, w którymuwzględnia się efekt nasycenia prędkości nośników. Model jest spójny fizycznie i może być stosowany w analizie dowolnej konfiguracji włączenia tranzystora.
-
Estimating Traffic Intensity Employing Passive Acoustic Radar and Enhanced Microwave Doppler Radar Sensor
PublicationInnovative road signs that can autonomously display the speed limit in cases where the trac situation requires it are under development. The autonomous road sign contains many types of sensors, of which the subject of interest in this article is the Doppler sensor that we have improved and the constructed and calibrated acoustic probe. An algorithm for performing vehicle detection and tracking, as well as vehicle speed measurement,...