Filters
total: 930
-
Catalog
Search results for: azoles
-
Silicon Oxycarbide (SiOC) Ceramic Materials as Anodes for Lithium Ion Batteries
PublicationPolymer derived ceramics (PDCs) have attracted attention as alternative anode material for Li-ion batteries. It has been found that ternary SiOC and SiCN ceramics obtained through pyrolysis of various preceramic polymers display high reversible capacities of 500 – 650 mAh/g. In this work we try to correlate the electrochemical performance of polymer derived silicon oxycarbide with its chemical composition and microstructural features....
-
Influence of anodes fabrication conditions on properties of solid oxide fuel cells
PublicationW pracy zamieszczono wyniki badań tlenkowych ogniw paliwowych różniących się warunkami przygotowania anody. Poszczególnego ogniwa różniły się ciśnieniem ściskania, temperaturą spiekania i składem anody.
-
Soft-decision schemes for radar estimation of elevation at low grazing angles
PublicationIn modern radars, the problem of estimating elevation angle at low grazing angles is typically solved using superresolution techniques. These techniques often require one to provide an estimate of the number of waveforms impinging the array, which one can accomplish using model selection techniques. In this paper, we investigate the performance of an alternative approach, based on the Bayesian-like model averaging. The Bayesian...
-
Występowanie oraz charakterystyka molekularna oporności na azole wśród klinicznych i środowiskowych izolatów Aspergillus fumigatus
PublicationCelem badań prowadzonych w ramach niniejszej pracy doktorskiej było sprawdzenie występowania oporności na azole grzybów A. fumigatus pochodzących z Polski oraz jej molekularna charakterystyka. W toku badań utworzono kolekcję 200 izolatów A. fumigatus pochodzących z różnych miejsc Polski. W skład kolekcji wchodziły izolaty kliniczne, środowiskowe i weterynaryjne. Przynależność gatunkową badanych grzybów potwierdzono metodami diagnostyki...
-
Influence of Holes Manufacture Technology on Perforated Plate Aerodynamics
PublicationTranspiration flow is a very important and still open subject in many technical applications. Perforated walls are useful for the purpose of “flow control”, as well as for the cooling of walls and blades (effusive cooling) in gas turbines. We are still not able to include large numbers of holes in the numerical calculations and therefore we need physical models. Problems are related also to the quality of the holes in perforated...
-
Heave Plates with Holes for Floating Offshore Wind Turbines
PublicationThe paper presents an innovative solution which is heave plates with holes. The long-known heave plates are designed to damp the heave motion of platforms. They are most often used for Spar platforms. The growing interest in this type of platform as supporting structures for offshore wind turbines makes it necessary to look for new solutions. Based on the available literature and the authors’ own research, it was concluded that...
-
Models of using the Internet by young Poles and their social capital.
PublicationHighlights • Study examining Polish youth on internet usage styles. • Online communication is the most common form of spending time on the Internet. •...
-
Modeling for Detection of Degraded Zones in Metallic and Composite Structures
PublicationW pracy przedstawiono przegląd metod modelowania uszkodzeń w postaci pęknięć i delaminacji wystepujących w elementach konstrukcyjnych
-
Mutual recognition of certification systems: The case of SERMO and ACLES
Publication -
Territorial Aspects of Entrepreneurial Activity in Polish Suburban Zones
PublicationGlobalization has led to an increased correlation and integration of various fields in modern civilization, including those connected with allocation of entrepreneurial functions. Connection, on a global scale, has shown an increased significance of worldwide corporations. Territorial allocation of the entrepreneurial function has become the subject of translocation and revaluation. Translocation can be understood as the change...
-
Modelling of shear zones in granular materials within hypoplasticity.
PublicationW artykule przedstawiono wyniki numerycznej analizy ściskania w płaskim stanie odkształcenia dla materiałów granulowanych. Obliczenia przeprowadzono z modelem hipoplastycznym rozszerzonym o obroty, nielokalność i gradienty odkształceń.
-
Effect of heterogeneity on formation of shear zones in granular bodies.
PublicationW artykule przedstawiono wyniki numerycznej analizy ściskania w płaskim stanie odkształcenia dla materiałów granulowanych. Obliczenia przeprowadzono z mikropolarnym modelem hipoplastycznym. Obliczenia wykonano dla różnych rodzajów imperfekcji w próbce piasku zagęszczonego i luźnego.
-
Optimal Rotating Receiver Angles Estimation for Multicoil Dynamic Wireless Power Transfer
PublicationThis study proposed an approach to dynamic wireless charging that uses a rotating receiver coil. Our simulation study focused on the verification of a novel way of increasing the coupling coefficient and power transfer stability by following the flux of the transmitting coils. To obtain the highest possible coupling by means of the FEM analysis, we studied the optimization of the trajectory of the angular velocity of the rotating...
-
A facile strategy for reclaiming discarded graphite and harnessing the rate capabilities of graphite anodes
PublicationGraphite negative electrodes are unbeaten hitherto in lithium-ion batteries (LiBs) due to their unique chemical and physical properties. Thus, the increasing scarcity of graphite resources makes smart recycling or repurposing of discarded graphite particularly imperative. However, the current recycling techniques still need to be improved upon with urgency. Herein a facile and efficient hydrometallurgical process is reported to...
-
The Effect of Increasing the Amount of Indium Alloying Material on the Efficiency of Sacrificial Aluminium Anodes
PublicationAl-Zn-In alloys having 4.2% zinc content and various indium content in the range of 0.02–0.2% were tested with respect to the most important electrochemical properties of sacrificial anodes in a cathodic protection, i.e., the current capacity and potential of the operating anode. The distribution of In and Zn in the tested alloys was mapped by means of the EDX technique, which demonstrated that these elements dissolve well in the...
-
Diatoms Biomass as a Joint Source of Biosilica and Carbon for Lithium-Ion Battery Anodes
PublicationThe biomass of one type cultivated diatoms (Pseudostaurosira trainorii), being a source of 3D-stuctured biosilica and organic matter—the source of carbon, was thermally processed to become an electroactive material in a potential range adequate to become an anode in lithium ion batteries. Carbonized material was characterized by means of selected solid-state physics techniques (XRD, Raman, TGA). It was shown that the pyrolysis...
-
Electrochemical investigations of conductive coatings applied as anodes in cathodic protection of reinforced concrete
Publication -
Synthesis of 5-arylidene-2-amino-4-azolones and evaluation of their anticancer activity
Publication -
Measurement of ethylene production as a method for determining the optimum harvest date of ‘Jonagored’ apples
Publication -
EFFECTS OF 13 YEARS SOIL FERTILISATION ON STORAGE QUALITY OF âCORTLANDâ APPLES
Publication -
The outline of percolation theory in reference to Solid Oxide Fuel Cell composite anodes
PublicationPrzedstawiono podstawy teoretyczne dotyczące zjawiska perkolacji w układach nieuporządkowanych. Zaprezentowano obecny stan wiedzy na temat wykorzystania teorii perkolacji w materiałach elektrodowych dla tlenkowych ogniw paliwowych.
-
Measurements of inelastic electron scattering from molecular oxygen at high scattering angles
PublicationBadano procesy wzbudzenia oscylacyjnego poziomów v = 1-9 stanu podstawowego X3 sigma g oraz v=0 stanu wzbudzonego a1 delta g cząsteczki tlenu dla energii 10eV w przedziale kąta rozproszenia od 90 do 180 st. Dla pomiaru v=1 stanu X3 sigma g wyznaczono różniczkowy przekrój czynny na wzbudzenie. W pomiarach wykorzystano podwójny hemisferyczny spektrometr elektrostatyczny wykorzystujący nowozaprojektowane źródło lokalnego pola magnetycznego.
-
Theoretical analysis of solvent effects on nitrogen NMR chemical shifts in oxazoles and oxadiazoles
Publication -
A review on the critical challenges and progress of SiOx-based anodes for lithium-ion batteries
Publication -
Numerical analysis of the container vessel's self-propulsion at different rudder deflection angles
PublicationNowadays, CFD becomes one of the most commonly used research method in ship hydrodynamics, limited to the analyses of hull resistance in calm water. With continuously improving computing power and increasingly more accurate numerical methods it is possible to simulate more complex cases. State of the art CFD tools also enable development of new ways of assessing ship maneuvering performance. This paper presents an attempt on...
-
Hollow carbon sphere/metal oxide nanocomposites anodes for lithium-ion batteries
Publication -
Tailoring of SiOC composition as a way to better performing anodes for Li-ion batteries
PublicationPolymer derived silicon oxycarbide (SiOC) ceramics are investigated as potential anodes for lithiumion batteries. Different SiOC ceramics are prepared by pyrolysis (1000 °C and 1400 °C under controlled argon atmosphere) of polysiloxanes ceramic precursors. Preceramic polymers are synthesized using the sol–gel method. Phenyltriethoxysilane (PhTES) and methyltriethoxysilane (MTES) have been used as starting precursors and mixed with...
-
Numerical analysis of the container vessel's self-propulsion at different rudder deflection angles
PublicationNowadays, CFD becomes one of the most commonly used research method in ship hydrodynamics, limited to the analyses of hull resistance in calm water. With continuously improving computing power and increasingly more accurate numerical methods it is possible to simulate more complex cases. State of the art CFD tools also enable development of new ways of assessing ship maneuvering performance. This paper presents an attempt on using...
-
Electrochemical investigations of conductive coatings applied as anodes in cathodic protection of reinforced concrete.
PublicationW pracy przedstawiono rezultaty badań elektrochemicznych polimerów przewodzących z pigmentem grafitowym. Wyznaczono parametry elektrochemiczne badanych powłok w trakcie długotrwałej polaryzacji zbrojonego betonu. W oparciu o pomiary impedancyjne wyznaczono parametry elektrochemiczne powłok przewodzących. Wykazano, że badane powłoki mogą być stosowane w ochronie katodowej żelbetu. Badania wykazały, że optymalne stężenie grafitu...
-
Arabinoxylans: A review on protocols for their recovery, functionalities and roles in food formulations
PublicationArabinoxylans (AXs) are compounds with high nutritional value and applicability, including prebiotics or supplementary ingredients, in food manufacturing industries. Unfortunately, the recovery of AXs may require advanced separation and integrated strategies. Here, an analysis of the emerging techniques to extract AXs from cereals and their by-products is discussed. This review covers distinct methods implemented over the last...
-
Evaluations of Men in Domestic Roles in Canada, Norway, Poland, and India
Publication -
Beyond clinical care: the pharmacoeconomic and research roles of pharmacists in Poland
Publication -
Team Roles and Team Performance in Small Virtual Software Teams
PublicationThe article presents the results of research on the composition of team roles conducted in 24 student software teams. An adaptation of M. Belbin’s model by B. Kożusznik was used. The model of team balance according to Belbin and Haaf is presented and correlations between team balance and team performance are analysed. Team performance is measured at three levels: result, satisfaction and team climate. The selected constellation...
-
Virtualization of Poles’ buying behavior duringthe COVID-19 pandemic
Publication -
DATA INTEROPERABILITY AND THE OPEN DATA ECOSYSTEM: ROLES AND RESEARCH AREAS
PublicationSustainability and value-creation are considered important parameters to measure the success of an open data system. Unfortunately, existing open data systems are not meeting their promises to achieve a sustainable and value-based open data system. Van Loenen et al. (2021) proposed a sustainable and value-creating open data ecosystem. According to their study, the open data ecosystem needs to be user-driven, inclusive, circular,...
-
Synchronization helps robots to detect black holes in directed graphs
PublicationPraca zawiera nowe wyniki dla problemu poszukiwania czarnej dziury w grafie skierowanym przez zbiór agentów. Czarna dziura jest węzłem niszczącym wszystkich wchodzącej do niej agentów. Pokazano, że w przypadku, gdy stopień wejściowy czarnej dziury wynosi D, do przeszukania grafu skierowanego w modelu synchronicznym wystarcza O(D 2^D) agentów. Wartość ta jest bliska znanemu z literatury oszacowaniu dolnemu Omega (2^D). W pracy pokazano...
-
The cultural roles of perforated fish vertebrae in prehistoric and historic Europe
Publication -
ANALYSIS OF CLIMATIC ZONES IN POLAND WITH REGARD TO ASPHALT PERFORMANCE GRADING
PublicationTowards the end of the last century a new system of bitumen grading was developed and implemented as part of the American Strategic Highway Research Program (SHRP). Its aim was to better adjust the testing methods and requirements for road bitumens to the actual conditions in which those bitumens serve in road pavements. Currently in Poland, similarly as in the other EU countries, road bitumens are tested and classified with regard...
-
Experimental and numerical identification of separation zones in the cent-rifugal compressor
PublicationW pracy przedstawiono analizę przepływu w obszarze koła wirnikowego oraz dyfuzora bezłopatkowego sprężarki powietrza. Wyniki obliczeń w ramach modelu 3D (FLUENT 5.5) porównano z wynikami badań laboratoryjnych na stanowisku sprężarkowym Katedry Sprężarek w Sankt Petersburgu. Celem porównania jest ocena możliwości identyfikacji stref przepływu z oderwaniem, w ramach modeli dostępnych w wykorzystanym programie obliczeniowym. W wyniku...
-
FE-analysis of contractant shear zones in loose granular materials
PublicationW artykule przedstawiono wyniki numerycznej analizy stref ścinania w materiałach granulowanych luźnych. Obliczenia wykonano dla 4 różnych problemów brzegowych: ścinania warstwy między dwoma bardzo szorstkimi ścianami, ściskania w płaskim stanie odkształcenia, dwuosiowego ściskania, odporu na ściankę. Obliczenia wykonano stosując metodę elementów skończonych na bazie mikropolarnego prawa hipoplastycznego.
-
Discrete Modelling of Micro-structural Phenomena in Granular Shear Zones
PublicationThe micro-structure evolution in shear zones in cohesionless sand for quasi-static problems was analyzed with a discrete element method (DEM). The passive sand failure for a very rought retaining wall undergoing horizontal translation towards the sand backfill was discussed. To simulate the behaviour of sand, the spherical discrete element model was used with elements in the form of rigid spheres with contacts moments.
-
Study of some micro-structural phenomena in granular shear zones
PublicationW artykule pokazano wyniki dyskretne zachowania się ziaren materiałów granulowanych w strefie ścinania uzyskane metodą DEM. Wyniki porównano z wynikami MES na bazie mikropolarnego hipoplastycznego prawa konstytutywnego. Szczególną uwagę zwrócono w obliczeniach na zjawiska mikrostrukturalne w strefie ścinania takie jak: wiry, łańcuchy sił, lokalne zmiany porowatości.
-
DEM ANALYSIS OF EFFECT OF INTERFACIAL TRANSITIONAL ZONES ON FRACTURE IN CONCRETE.
PublicationArtykuł omawia wyniki numeryczne dotyczące pękania betonu uzyskane stosując metodę elementów dyskretnych. Trójwymiarowe obliczenia wykonano dla próbek betonowych podczas zginania. Beton został opisany jako model 4-fazowy. Mikrostrukturę betonu przyjęto na podstawie 3D zdjęć mikro-tomograficznych. Zbadano wpływ stref przejściowych na wytrzymałość i proces pękania. Wyniki numeryczne zostały porównane z wynikami doświadczalnymi. Uzyskano...
-
Discrete analysis of micro-structural events in granular shear zones
PublicationW artykule pokazano rozwój różnych zjawisk mikrostrukturalnych na poziomie ziarna podczas parcia pasywnego piasku na sztywną ściankę przemieszczającą się poziomo. Obliczenia wykonano stosując metodę DEM. Wyniki na poziomie globalnym porównano z wynikami MES. Szczególna uwagę zwrócono na rozwój łańcuchów sił miedzy ziarnami.
-
The comparison of SrTi0.98Nb0.02O3-δ-CeO2 and SrTi0.98Nb0.02O3-δ-YSZ composites for use in SOFC anodes
PublicationWytworzono i przebadano właściwości strukturalne i elektryczne kompozytów SrTi0.98Nb0.02O3-δ-CeO2 i SrTi0.98Nb0.02O3-δ-YSZ. Przeprowadzono testy materiałów zastosowanych jako anody w tlenkowych ogniwach paliwowych.
-
Investigation of functional layers of solid oxide fuel cell anodes for synthetic biogas reforming
PublicationSolid oxide fuel cells (SOFCs) are one of the most promising energy conversion devices due to their high efficiency, low pollution and fuel flexibility. Unfortunately, when hydrocarbons are used as a fuel, for example in the form of a biogas, solid carbon can deposit on the anode surface. This process leads to the degradation of the fuel cell performance. A possible solution to this problem is to apply an additional catalytic material,...
-
Comparing Apples and Oranges: A Mobile User Experience Study of iOS and Android Consumer Devices
PublicationWith the rapid development of wireless networks and the spread of broadband access around the world, the number of active mobile user devices continues to grow. Each year more and more terminals are released on the market, with the smartphone being the most popular among them. They include low-end, mid-range, and of course high-end devices, with top hardware specifications. They do vary in build quality, utilized type of material,...
-
The comparison of SrTi0.98Nb0.02O3–δ-CeO2 and SrTi0.98Nb0.02O3–δ-YSZ composites for use in SOFC anodes
PublicationComposites of Nb-doped strontium titanate mixed with yttria-stabilized zirconia or cerium oxide in 50:50, 70:30 and 85:15 weight ratios were evaluated as possible anode/electrolyte interface materials for solid oxide fuel cells in terms of chemical compatibility, electrical conductivity and mechanical properties. It has been shown that composite samples prepared by typical powder-mixing methods remain single-phase up to 1400°C....
-
Anales de Historia del Arte
Journals -
Angles: New Perspectives on the Anglophone World
Journals