Wyszukiwarka
Filtry
wszystkich: 1325
wybranych: 567
Wyniki wyszukiwania dla: FEED PER TOOTH
-
Theoretical and Actual Feed Per Tooth During Wood Sawing on an Optimizing Cross-Cut Saw
PublikacjaThe work presents the geometries of circular saw teeth, whose task is to divide the cross-cut of the cutting layer. For efficient machining on a cross-cut saw with high feed speed values (about 1 ms−1) maximal theoretical feeds per tooth are determined. These values were compared with the actual values determined during transverse cutting of pine wood on a special test stands in industrial conditions. In the experiment the rotational...
-
Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw
PublikacjaThe experimental results of the study focused on the effect of drying processes of modified air drying and warm air steam mixture drying of pine and beech wood on the size of sawdust particles created in cutting using PRW-15M sash gang saw, are presented in the paper. Particle size analysis of dry sawdust was performed using two methods—sieving method and laser diffraction analysis. The results showed that the drying process did...
-
Preliminary studies on the effect of feed speed on the colour change of wood
PublikacjaThis paper presents the results of preliminary analyses of the effect of cutting parameters on changes in the colour of wood. Beech wood cut with use circular saw was analysed. The cutting parameter tested was the feed speed, represented by the feed per tooth. Sawing processes with different feed per tooth ranging from 0.0008 mm to 0.09 mm were analysed. It was observed that over the entire range of feed rate per tooth analysed,...
-
Analysis of surface roughness of chemically impregnated Scots pine processed using frame-sawing machine
PublikacjaThe objective of this work was to evaluate the effect of the impregnation process of pine wood (Pinus sylvestris L.) on roughness parameters of the surface processed on a frame sawing. The samples weredried and impregnated using a commercial procedure by a local company. The touch method withthe use of measuring stylus (pin) was employed to determine of surface roughness of the samplesconsidering parameters, namely, arithmetical...
-
Is It Right To Predict Cutting Forces On The Basis Of Wood Density?
PublikacjaSeveral properties of wood can be correlated to wood density. It is widely accepted that the cutting power requirements are following this general assumption. Therefore, according to classic literature sources available for determination of the cutting power for both band- and circular- sawing machines, the cutting power requirements (and/or cutting forces) are computed as a function of the wood specific gravity SG. It was shown...
-
Characterization of Arctic Driftwood as Naturally Modified Material. Part 1: Machinability
PublikacjaArctic driftwood has reached the coast of Iceland for centuries. This material was used by the inhabitants of the island as a building material for houses, boats, churches and pasture fences. Nowadays, the driftwood is used in the furniture industry, for the finishing of internal and external walls of buildings and also by artists. The properties of driftwood differ to that of original resource due the long-term effects of exposure...
-
Analysis of Roughness, the Material Removal Rate, and the Acoustic Emission Signal Obtained in Flat Grinding Processes
PublikacjaIn this work, the analysis of the acoustic emission (AE) signal in grinding processes is addressed. The proposed analysis method decomposes the acoustic signal into three frequency ranges. The total energy of each range is determined, as well as the highest frequency. Different grinding experiments were carried out, according to a full factorial design of experiments (DOE), in which feed speed, depth of cut, and transversal step...
-
Methodology for determination of the selected mechanical properties of wood based on cutting tests
PublikacjaFrom kiln-dried spruce wood (with steam) as well as in natural conditions were randomly selected 8 samples. After determining the average dimensions, moisture content and density of the samples they have been cut on the frame sawing machine PRW15M for measurement of cutting power. Based on those results from a linear rela-tionship of cutting power versus feed per toot mechanical properties of wood such as facture toughness and...
-
A newly-developed model for predicting cutting power during wood sawing with circular saw blades
PublikacjaIn the classical approach, cutting forces and cutting power in sawing processes of orthotropic materials such as wood are generally calculated on the basis of the specific cutting resistance kc (cutting force per unit area of cut). For every type of sawing kinematics (frame saws, band saws and circular sawing machines) different empirical values of specific cutting resistance kc have to be applied. It should be emphasised that...
-
Influence of geometrical and operational parameters on tooth wear in the working mechanism of a satellite motor
PublikacjaThis article describes the phenomena affecting the wear of the rotor of the working mechanism in a hydraulic satellite motor. The basic geometrical relationships that allow the calculation of the coordinates of the points of contact between the satellite and the rotor and the curvature are presented. A method for calculating the number of contacts of the satellite teeth with the rotor teeth and of the satellite teeth with the curvature...
-
COMPUTER-AIDED CONSTRUCTION AT DESIGNING REINFORCED CONCRETE COLUMNS AS PER EC
PublikacjaThe article presents the author’s computer program for designing and dimensioning columns in reinforced concrete structures taking into account phenomena affecting their behaviour and information referring to design as per EC. The computer program was developed with the use of C++ programming language. The program guides the user through particular dimensioning stages: from introducing basic data such as dimensions, concrete...
-
System for control of the saw tooth geometry.
PublikacjaW pracy przedstawiono sposób i urządzenie do sprawdzania geometrii ostrzy pił tarczowych z wykorzystaniem komputerowej rejestracji obrazów ostrzy i ich obróbką cyfrową.
-
Design advantages and analysis of a novel five-phase doubly-fed induction generator
PublikacjaPurpose – The purpose of this paper is to provide an analysis of the performance of a new five-phase doubly fed induction generator (DFIG). Design/methodology/approach – This paper presents the results of a research work related to fivephase DFIG framing, including the development of an analytical model, FEM analysis as well as the results of laboratory tests of the prototype. The proposed behavioral level analytical model is based...
-
Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing
PublikacjaThe sound levels along with the cutting power registered during the sawing process of the impregnated and non-impregnated pine wood at two feed speeds are shown and compared in this paper. Statistically significant differences in the acoustic signals occurred at the lower feed rate. The differences became smaller with an increase in the feed speed. In contrast to the sound signal, the differences...
-
Employment and export specialization patterns versus GDP per capita performance - unifying approach
PublikacjaThis paper analyses the evolution of specialization patterns along the process of economic development. The scope of the paper is twofold: first of all, it aims at understanding if the evolution of employment specialization is reflected in the same manner in trade specialisation patterns. Secondly, it explores the link between the degree of specialization on one side and cross country GDP per capita performance on the other. We...
-
Reassesing whole tooth electrical impedance spectroscopy measurements
PublikacjaW pracy dokonano krytycznej oceny wyników wcześniejszych badań spektorskopowych zębów przeprowadzonych w innych ośrodkach i porównano je z własnymi. Wskazano na trudności występujące podczas pomiarów.
-
Apprendere camminando.Il metodo della Jane’s Walk per riscoprire San Lorenzo
PublikacjaTratta dal libro rivoluzionario che Jane Jacobs, attivista americana, ha scritto negli anni Sessanta e che ben presto è diventato un importante riferimento per la partecipazione dei cittadini nella progettazione urbana, questa citazione ben esprime l’approccio attraverso il quale ci siamo avvicinate alla riscoperta di San Lorenzo. Quartiere della città storica molto conosciuto, San Lorenzo si è rivelato in grado di disvelare paesaggi...
-
How Much Does an e-Vote Cost? Cost Comparison per Vote in Multichannel Elections in Estonia
PublikacjaWe are presenting the results of the CoDE project in this paper, where we investigate the costs per vote of different voting channels in Estonian Local Elections (2017). The elections analyzed involve different processes for casting a vote: Early Voting at County Centers, Advance Voting at County Centers, Advance Voting at Ordinary Voting District Committees, Electronic Voting, Election Day Voting, and Home Voting. Our analysis...
-
A rapid dispersive liquid–liquid microextraction of antimicrobial onion organosulfur compounds in animal feed coupled to gas chromatography-mass spectrometry
PublikacjaA rapid analytical procedure is proposed for determining two antimicrobial onion organosulfur compounds, propyl disulfide (PDS) and propyl propane thiosulfonate (PTSO), in animal feed. The use of PTSO as a natural ingredient in animal feed is allowed due to its antimicrobial activity against pathogenic organisms. Two analytical methodologies using gas chromatography coupled to mass spectrometry (GC-MS) are compared. After the extraction...
-
Chemical pretreatment of feed water for membrane distillation
Publikacja -
Feed as a source of polybrominated diphenyl ethers (PBDEs)
Publikacja -
Bernardino da Siena. Un predicatore per ogni tempo
Publikacja -
Future opportunities for products derived from black soldier fly (BSF) treatment as animal feed and fertilizer - A systematic review
PublikacjaThe pursuit of novel food products with good nutritional value for both direct and indirect human consumption is crucial. Given the nutritional benefits of insects and the sustainability of this sort of farming, using them as food for farmed animals is a promising alternative. In this regard, the black soldier fly (Hermetia illucens) is most capable of efficiently converting a wide variety of organic materials, from food waste...
-
Sugar Beet Pulp as a Biorefinery Substrate for Designing Feed
Publikacja -
Influence of frame sawing machine´s kinematics on saw blade tooth wear.
PublikacjaW pracy przedstawiono wpływ kinematyki pilarki ramowej na zużycie ostrzy piłtrakowych.
-
Subgroup and per-protocol analyses from the Hypertension in the Very Elderly Trial
Publikacja -
Analysis of bisphenols and their derivatives in infant and toddler ready-to-feed milk and powdered milk by LC MS/MS
PublikacjaReady-to-feed milk and powdered milk packed in different types of packaging lined with resin are chosen as the primary or complementary diet for infants and toddlers. An HPLC–MS/MS method was established and validated for the determination of nineteen bisphenols and their derivatives in such samples. The recoveries were from 31% to 120%, while the values of limit of detection and quantification were in the range of 0.24–0.40 and...
-
Comparison of extraction techniques of robenidine from poultry feed samples
PublikacjaW publikacji opisano wykorzystanie różnych technik ekstrakcji kokcydistatyków (na przykładzie robenidyny) z próbek pasz zwierzęcych. W trakcie badań porównano wpływ różnych parametrów ekstrakcji na współczynniki odzysku analitu. Wśród wykorzystanych technik ekstrakcji wymienić należy: ekstrakcję za pomocą rozpuszczalnika wspomaganą ultradźwiękami oraz mikrofalami, ekstrakcję w aparatach Soxhleta i Soxteca a także ekstrakcję przez...
-
The influence of feed rate and shear forces on the devulcanization process of ground tire rubber (GTR) conducted in a co-rotating twin screw extruder
PublikacjaThe search for new ways to recycling of rubber waste has been the aim of many studies conducted by research centers and companiesworldwide. The results of our investigations on the process of continuous thermomechanical devulcanization of ground tire rubber using a twin screw extruder are presented.We used a co-rotating twin screw extruder with a special configuration of plasticizing unit, enabling generation of considerable shear...
-
Experimental research of circular saw blade tooth axial run-out influence on cutting effects
PublikacjaW pracy przedstawiono metodę pomiaru i wyniki badań doświadczalnych wpływu bicia osiowego ostrzy piły tarczowej na efekty przecinania
-
Analysis of application of feed-water injector heaters to steam power plants
PublikacjaStrumienice parowo-wodne to urządzenia, w których zachodzi wymiana masy, pędu i energii między dwoma płynami, pozostającymi w bezpośrednim kontakcie. Mogą one pracować jako pompy, mieszalniki bądź bezprzeponowe wymienniki ciepła. W tym ostatnim aspekcie są one bardzo interesujące do użycia jako regeneracyjne podgrzewacze wody w obiegu cieplnym Rankina stosowanym w siłowniach parowych na lądzie oraz na morzu (statki i okręty). W...
-
Modifying CVD synthesised carbon nanotubes via the carbon feed rate
Publikacja -
Amphenicols stability in medicated feed – development and validation of liquid chromatography method
Publikacja -
Extraction and Analysis of Bisphenols and Their Derivatives in Infant and Toddler Ready-to-feed Meals by Ultrasound-assisted Membrane Extraction Followed by LC MS/MS
PublikacjaThis research developed an ultrasound-assisted membrane extraction coupled with liquid chromatography-tandem mass spectrometry method for the determination of nineteen bisphenols and their derivatives in infant and toddler ready-to-feed meals. The calibration curves for all analytes were linear in the tested range, and the limit of detection and limit of quantitation were in the range 0.27 to 0.79 ng/g and 0.80 to 2.4 ng/g, respectively....
-
Per far midaglie di gesso: Giovanni Bernardino Bonifacio i sztuka portretu all'antica.
Publikacja -
Implementation of adaptive feed-forward algorithm on embedded PowerPC405 processor for FLASH accelerator
Publikacja -
The utilization of sludge generated in coagulation of fish processing wastewater for liquid feed production
PublikacjaWykorzystano koagulację do wydzielenia ze ścieków z przemysłu rybnego białek i tłuszczów. Uzyskany osad pokoagulacyjny dodawano do produkcji rybnych hydrolizatów białkowych. Zmodyfikowano proces wytwarzania rybnych hydrolizatów z wykorzystaniem kwasów siarkowego (VI) oraz ortofosforowego (V).
-
Turmeric nanofiber-encapsulated natural product formulation act as a phytogenic feed additive—A study in broilers on growth performance, biochemical indices of blood, and E. coli in cecum
PublikacjaA phytogenic feed additive (PFA) formulation was prepared with bioactive molecules—curcuminoids, gingerol, and carvacrol by encapsulating in nanofiber isolated from turmeric spent (turmeric nanofiber, TNF). This formulation was completely characterized by scanning electron microscope, ultra performance liquid chromatography, and gas chromatography and evaluated for its efficacy. PFA-encapsulated TNF (PFA@TNF) considerably increased...
-
Application of Feed Forward Neural Networks for Modeling of Heat Transfer Coefficient During Flow Condensation for Low and High Values of Saturation Temperatur
PublikacjaMost of the literature models for condensation heat transfer prediction are based on specific experimental parameters and are not general in nature for applications to fluids and non-experimental thermodynamic conditions. Nearly all correlations are created to predict data in normal HVAC conditions below 40°C. High temperature heat pumps operate at much higher parameters. This paper aims to create a general model for the calculation...
-
3D Morphable Models Application for Expanding Face Database Limited to Single Frontal Face Per Person
Publikacja1. Zaprezentowany materiał dotyczył badań nad rozszerzeniem dysponowanej bazy wzorców wizerunków twarzy, o dodatkowe wzorce z wariacją w ustawieniu. Dodatkowe wzorce były usyskiwane poprzez przejście z wizerunku twarzy 2D na model 3D, zasymulowanie zadanego ustawienia i powrót do dziedziny 2D (poprzez rzutowanie 3D->2D). W fazie konstrukcji modelu 3D, z wizerunku 2D była ściągana zarówno tekstura twarzy jak i siatka punktów charakterystycznych....
-
Statistical evaluation of the effectiveness of different extraction techniques for determining robenidyne levels in poultry feed.
PublikacjaPoprzez zastosowanie testu Kruskala-Wallisa i chemometrycznej techniki analizy podobieństwa porównano efektywność sześciu różnych technik ekstrakcji (wytrząsanie, ekstrakcja w aparacie Soxhleta, w aparacie Soxteca, wspomaganej ultradźwiękami, wspomaganej promieniowaniem mikrofalowym oraz przyspieszonej ekstrakcji rozpuszczalnikiem) na podstawie wyników odzysku robenidyny z próbek paszy dla ptaków. W zależności od zastosowanej techniki...
-
Tench (Tinca tinca) high-throughput transcriptomics reveal feed dependent gut profiles
Publikacja -
Feed forces during cutting of wood on frame sawing machines with narrow-kerf saws.
PublikacjaW pracy przedstawiono wybrane efekty energetyczne procesu przecinania drewna na pilarce ramowej za pomocą cienkich pił. Opisano wyniki badań eksperymentalnych sił posuwu przy zastosowaniu pił o dobrej jakości krawędzi skrawających (piły ostre) oraz pił których krawędzie skrawające były obarczone błędami wykonania w postaci wyszczerbień i wykruszeń krawędzi skrawających. Badania przeprowadzono na pilarce ramowej PRW15M.
-
I rimedi per raffinare la bellezza del corpo secondo l’insegnamento di Trotula di Salerno
Publikacja -
Giovanni Antonio Dosio a Napoli e un sepolcro per Stanislao Rescius, umanista e diplomatico polacco.
Publikacja -
UN’IPERTROFIA INEVITABILE? LA MOBILITAZIONE INDUSTRIALE E LA TRASFORMAZIONE DELL’APPARATO AMMINISTRATIVO PER LO SFORZO BELLICO
PublikacjaIl capitolo esamina le trasformazioni dell'apparato amministrativo in relazione alle esigenze dello sforzo bellico
-
Rapeseed Meal Waste Biomass as Single-Cell Protein Substrate for Nutritionally-Enhanced Feed Component
Publikacja -
Accurate Lightweight Calibration Methods for Mobile Low-Cost Particulate Matter Sensors
PublikacjaMonitoring air pollution is a critical step towards improving public health, particularly when it comes to identifying the primary air pollutants that can have an impact on human health. Among these pollutants, particulate matter (PM) with a diameter of up to 2.5 μ m (or PM2.5) is of particular concern, making it important to continuously and accurately monitor pollution related to PM. The emergence of mobile low-cost PM sensors...
-
Excitation of Circularly Polarized Wave via Single-Feed Metasurface-Integrated Compact Antenna for Internet of Things
PublikacjaA compact circularly polarized (CP) quasi-omnidirectional antenna is introduced for internet of things (IoT). The structure consists of two components implemented on FR-4 substrates, and sep-arated by an air gap: one printed with a rectangular patch fed through a matching network, and another with a metasurface and a ground plane. Two different methods for impedance matching are employed. An equivalent circuit model of the antenna...
-
The influence of the basic conditions of the forced feed of abrasive compound on the roughness of flat ceramic elements after lapping.
PublikacjaW docieraniu standardowym zawiesina ścierna dostarczana jest do strefy obróbki w sposób ciągły - zalewowo lub kroplowo, co generuje duże straty ścierniwa. W artykule opisano innowacyjny system dozowania i nanoszenia zawiesiny ściernej na powierzchnię żeliwnego docieraka tarczowego, który eliminuje tą wadę. W przeprowadzonych eksperymentach badano wpływ procentowej zawartości ziaren ściernych w nośniku oraz wielkość dawki zawiesiny...