Wyszukiwarka
Wyniki wyszukiwania dla: ELASTIC PROPERTIES
-
On Von Karman Equations and the Buckling of a Thin Circular Elastic Plate
PublikacjaWe shall be concerned with the buckling of a thin circular elastic plate simply supported along a boundary, subjected to a radial compressive load uniformly distributed along its boundary. One of the main engineering concerns is to reduce deformations of plate structures. It is well known that von Karman equations provide an established model that describes nonlinear deformations of elastic plates. Our approach to study plate deformations...
-
Mechanical properties for preliminary design of structures made from PVC coated fabric
PublikacjaIn this paper, laboratory tests necessary for the identification of non-linear elastic immediate properties of the PVC coated polyester fabric (like AF 9032) are described. The material parameters are specified on the basis of the uniaxial tensile tests in the warp and weft directions as well as on the base of the biaxial tensile tests. For the identification process techniques based on the least squares method are used. The authors...
-
On effective surface elastic moduli for microstructured strongly anisotropic coatings
PublikacjaThe determination of surface elastic moduli is discussed in the context of a recently proposed strongly anisotropic surface elasticity model. The aim of the model was to describe deformations of solids with thin elastic coatings associated with so-called hyperbolic metasurfaces. These metasurfaces can exhibit a quite unusual behaviour and concurrently a very promising wave propagation behaviour. In the model of strongly anisotropic...
-
Anti-plane waves in an elastic thin strip with surface energy
PublikacjaWe consider anti-plane motions of an elastic plate taking into account surface energy within the linear Gurtin–Murdoch surface elasticity. Two boundary-value problems are considered that describe complete shear dynamics of a plate with free faces or with free and clamped faces, respectively. These problems correspond to anti-plane dynamics of an elastic film perfectly or non-perfectly attached to a rigid substrate. Detailed analysis...
-
Numerical analysis of mechanical properties of an infill structure used in 3D printings
PublikacjaThe paper presents results of a numerical analysis focused on an identification of mechanical properties of an element created by using Fused Deposition Modelling additive manufacturing technique (FDM). There is presented a description of technology of the 3D printing, numerical model created by using the finite element method (FEM), as well as some problems referred to estimation of the mechanical properties of the printout. The...
-
Wave transmission across surface interfaces in lattice structures
PublikacjaWithin the lattice dynamics formulation, we present an exact solution for anti-plane surface waves in a square lattice strip with a surface row of material particles of two types separated by a linear interface. The considered problem is a discrete analog of an elastic half-space with surface stresses modelled through the simplified Gurtin–Murdoch model, where we have an interfacial line separating areas with different surface...
-
Fracture Energy of Bonded Joints with 2D Elastic Adhesive Layer
PublikacjaWhen bonded joint is subjected to mode I fracture loading, the adhesive joints analytical solutions treats the adhesive layer, usually, as not existing or 1D Hooke elastic layer. In the case of 1D elastic layer, represented as Hookes spring element, is acting, only, in direction contrary to the applied load. Basing on the information yielded from sensitive laser profilometry technique, where deflections of bonded part of the joint...
-
Low energy elastic electron scattering from benzonitrile (C6H5CN)
PublikacjaWe present experimental differential elastic scattering cross sections (DCSs) for low energy electron scattering from benzonitrile along with integral and momentum-transfer cross sections that are determined from these DCSs. The measurements of DCSs are obtained using the relative flow method with helium as the standard gas, in a crossed electron-molecular gas beam arrangement. Our measurements are made at incident electron energies...
-
On refined constitutive equations in the six-field theory of elastic shells
PublikacjaWithin the resultant six-field shell theory, the second approximation to the complementary energy density of an isotropic elastic shell undergoing small strains is constructed. In this case, the resultant drilling couples are expressed explicitly by the stress resultants and stress couples as well as by amplitudes of the quadratic and cubic distributions of an intrinsic deviation vector. The refined 2D strain-stress and stress-strain...
-
Comparison of elastic and viscoelastic analysis of asphalt pavement at high temperature
PublikacjaThere are many various rheological models which are used for modeling of asphalt layers in flexible pavement structures. It can be expected that the use of various models may affect different results of mechanical pavement calculations and analysis. The paper presents comparison of the use of Burgers’ and Huet-Sayegh’s viscoelastic models and Hooke’s elastic model to calculate pavement deflections and strains at the bottom of asphalt...
-
Elastic wave propagation software in structural health monitoring
PublikacjaW pracy omówiono program do analizy propagacji fal spręzytsych w lementach konstrukcji z uszkodzeniami, oraz omówiono mozliwości jego wykorzystania do monitorowania stanu konstrukcji.
-
Elastic modulus of Cement Bound Granular Material (CBGM)
Publikacja -
Software tool for modelling of mechatronic systems with elastic continua
PublikacjaThe paper presents a systematic computational package for modelling and analysis of complex systems composed of multiple lumped and distributed parameter subsystems. The constructed computer program enables the frequency domain analysis of a class of linear systems and to obtain reduced order model in the form of bond graph. Obtained modal bond graph can be directly exported into 20-Sim package to further processing including nonlinear...
-
Bolted Joint Monitoring Using the Elastic Wave Propagation
Publikacja -
Elastic scattering and rotational excitation of Li2 by positron impact
Publikacja -
Micromechanical analysis of friction anisotropy in rough elastic contacts
Publikacja -
Numerical analysis of elastic wave propagation in unbounded structures
Publikacja -
EBE: elastic blob ensemble for coarse human tracking
PublikacjaProponujemy nowy probabilistyczny algorytm śledzenia oparty na elastycznym zespole kropelkowym (EBE), który ma zastosowanie przy śledzeniu obiektów elastycznych. Wynikiem jest wskazówka nt. zgrubnego ruchu w postaci lokalizacji i orientacji obiektu wraz z lokalizacją kropelki. Głównym założeniem jest to, że orientacja całego obiektu nie zmienia się znacznie między sąsiednimi klatkami. Dyskretna przestrzeń rozwiązań jest tworzona...
-
Stability of truss with side - supports. The case of linear and rotational elastic supports
PublikacjaThe research is devoted to study lateral buckling of truss with linear and rotational elastic side-supports. Geometrically nonlinear analysis of example truss with linear and rotational elastic sidesupports is carried out. The limit normal force in compressed chord of the truss due to stiffness of side supports is calculated. The elastic support reaction in relation to force in compressed chordand coefficient of buckling length...
-
Low energy elastic scattering of electrons from hexafluoropropene (C3F6)
PublikacjaWe present cross sections from a joint experimental and theoretical study on elastic electron scattering from hexafluoropropene (C3F6) in the gas phase. The experimental results, using low energy electron spectroscopy, were obtained at incident electron energies of 0.5, 1, 1.5, 2, 3, 4, 5, 6, 10, 12, 15 and 20 eV, for scattering angles ranging from 10°to 130°. The theoretical method used in the computation of the integral, momentum...
-
Elastic Fender-Dolphin Interaction for Economic Design of Berthing Dolphins
PublikacjaThe study addresses the question of the possible design benefits when considering the interaction between a modern marine modular rubber fender and a steel tubular pile substructure of a berthing dolphin. Absorption of the berthing kinetic energy of the vessel by a dualelasticity pile-fender berthing system is described in detail using the interactive treatment method (ITM). Application of the ITM is illustrated by a calculative...
-
Low energy differential elastic electron scattering from acetonitrile (CH3CN)
PublikacjaMeasurements of elastic differential cross sections for electron scattering from acetonitrile (CH3CN) have been performed utilizing a crossed electron-molecular beam experiment and with the relative flow method, for the incident electron energy range of 0.7 eV–30 eV and the scattering angle range of 10◦–130◦. These differential cross sections have been used to calculate the elastic integral and momentum- transfer cross sections,...
-
A note on simple bifurcation of equilibrium forms of an elastic rod on a deformable foundation
PublikacjaWe study bifurcation of equilibrium states of an elastic rod on a two-parameter Winkler foundation. In the article "Bifurcation of equilibrium forms of an elastic rod on a two-parameter Winkler foundation" [Nonlinear Anal., Real World Appl. 39 (2018) 451-463] the existence of simple bifurcation points was proved by the use of the Crandall-Rabinowitz theorem. In this paper we want to present an alternative proof of this fact based...
-
Elastic wave propagation for condition assessment of steel bar embedded in mortar
PublikacjaThis study deals with experimental and numerical investigations of elastic wave propagation in steel bars partially embedded in mortar. The bars with different bonding lengths were tested. Two types of damage were considered: damage of the steel bar and damage of the mortar. Longitudinal waves were excited by a piezoelectric actuator and a vibrometer was used to non-contact measurements of velocity signals. Numerical calculations...
-
Effect of MAO coatings on cavitation erosion and tribological properties of 5056 and 7075 aluminum alloys
PublikacjaTwo ceramic coatings have been applied on 5056 and 7075 aluminum alloy by microarc oxidation (MAO) technology. The mass losses, surface morphologies and the phase constituents of the MAO coatings before and after cavitation tests were examined by means of digital scales, scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. In order to assess the impact of the mechanical properties of the surface layer on...
-
The influence of temperature on properties of the polymer flexible joint used for strengthening historical masonries
PublikacjaA new method of repairing damaged structures by filling the cracks with a specially prepared elastomeric polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure....
-
Extended non-linear relations of elastic shells undergoing phase transitions
PublikacjaThe non-linear theory of elastic shells undergoing phase transitions was proposed by two first authors in J. Elast. 79, 67-86 (2004). In the present paper the theory is extended by taking into account also the elastic strain energy density of the curvilinear phase interface as well as the resultant forces and couples acting along the interface surface curve itself. All shell relations are found from the variational principle of...
-
Low-energy positron collisions with water: elastic and rotationally inelastic scattering
PublikacjaDifferential, integral and momentum transfer cross sections for the vibrationally elastic and rotationally inelastic scattering of positrons from water at low collision energy (E ≤ 10 eV) are reported. Several models within the R-matrix method are used to compute the body-fixed T-matrices, while the scattering calculations are performed within the fixed-nuclei approximation corrected with the standard Born-closure formula. These...
-
Ground anchors diagnostic process based on elastic wave propagation method
PublikacjaThe paper is focused on analysis of elastic wave propagation in the context of diagnostics of ground anchors. Numerical simulations were performed to assess the possibility of evaluation of the anchorage quality. It was assumed that the quality and the load capacity of the anchor system directly depend on the length, on which mortar and steel cooperate.
-
On Solvability of Boundary Value Problems for Elastic Micropolar Shells with Rigid Inclusions
PublikacjaIn the framework of the linear theory of micropolar shells, existence and uniqueness theorems for weak solutions of boundary value problems describing small deformations of elastic micropolar shells connected to a system of absolutely rigid bodies are proved. The definition of a weak solution is based on the principle of virial movements. A feature of this problem is non-standard boundary conditions at the interface between the...
-
Bifurcation of equilibrium forms of an elastic rod on a two-parameter Winkler foundation
PublikacjaWe consider two-parameter bifurcation of equilibrium states of an elastic rod on a deformable foundation. Our main theorem shows that bifurcation occurs if and only if the linearization of our problem has nontrivial solutions. In fact our proof, based on the concept of the Brouwer degree, gives more, namely that from each bifurcation point there branches off a continuum of solutions.
-
Composites in energy storing prosthetic feet
PublikacjaComposites reinforced with carbon and glass fibers have become the commonly used material in the production of energy storing prosthetic feet (ESPF/elastic feet prostheses). Their properties ensure a stable and light structure that allows for accumulation, storage and release of energy during walking, thus ensuring an increase in gait efficiency. Depending on the modification of the composite in terms of fiber selection, their...
-
Low to intermediate energy elastic electron scattering from dichloromethane (CH2Cl2)
PublikacjaWe report a theoretical-experimental investigation of electron scattering by dichloromethane (CH2Cl2) in the low- and intermediate energy ranges. Experimental elastic differential cross sections (DCS), in the incident electron energy range of 0.5-800 eV and scattering angle range of 10°–130°, were measured using a crossed beam relative flow technique. Integral and momentum- transfer cross sections were determined from the experimental...
-
Research on assessment of bolted joint state using elastic wave propagation
PublikacjaThe work contains results of experimental investigation of elastic wave propagation in a bolted single-lap joint. Tests were carried out for the excitation perpendicular to the connection plane. In experimental studies, PZT transducers were used for both excitation and registration of ultrasonic waves. The analyses took into account varying contact conditions between the elements of the connection depending on the value of the...
-
Elastic wave propapagation in diagnostics of self-drilling system of grouted anchors
PublikacjaThe paper presents an experimental investigation of elastic wave propagation in a self-drilling hollow bar system, which is commonly used in geotechnical industry as the element of grouted ground anchors and soil nails. The single self-drilling hollow bar and self-drilling system of two bars connected by a coupler were considered. Longitudinal waves were excited at one end of the bar and registered at both ends, by means of PZT...
-
On Effective Bending Stiffness of a Laminate Nanoplate Considering Steigmann–Ogden Surface Elasticity
PublikacjaAs at the nanoscale the surface-to-volume ratio may be comparable with any characteristic length, while the material properties may essentially depend on surface/interface energy properties. In order to get effective material properties at the nanoscale, one can use various generalized models of continuum. In particular, within the framework of continuum mechanics, the surface elasticity is applied to the modelling of surface-related...
-
A Diagnostic Method Based on Deflection Analysis for Monitoring Post-elastic Response of Beams
PublikacjaA non-destructive diagnostic method based on deflection analysis for monitoring the post-elastic response of beams was developed, and a diagnostic indicator was proposed. The indicator was defined as the second moment of the normalised curvature function about the mid-span, where the curvature was computed from the normalised deflection function. Elastic reference values of the indicator were computed for simply supported beams...
-
On shear correction factors in the non-linear theory of elastic shells
PublikacjaW pracy wyprowadzono analitycznie wartości korekcyjnych współczynników ścinania dla ścinania poprzecznego oraz dla momentów owinięcia w ramach nieliniowej sześcioparametrowej teorii powłok. Wartości wyprowadzono poprzez odpowiednie sformułowanie komplementarnej energii sprężystej. Na drodze analizy przy pomocy MES, badano wpływ wartości współczynników na położenie punktów bifurkacji, deformacje, całkowitą energię sprężystą układu...
-
Accuracy and parameter estimation of elastic and viscoelastic models of water hammer
PublikacjaW artykule analizowany jest zagadnienie uderzenia hydraulicznego, stanowiące jeden z najważniejszych problemów nieustalonego przepływu w przewodach pod ciśnieniem. Mimo ponad stuletnich doświadczeń w badaniach zagadnienie to jest ciągle nie w pełni rozpoznane. Może być onio rozpatrywane na dwóch płaszczyznach - praktycznej i teoretycznej. W obu przypadkach na etapie rozwiązania powstają problemy sprawiające, że wyniki nie są satysfakcjonujące....
-
Low energy differential elastic electron scattering from trichloromethane
PublikacjaExperimental differential cross sections for low energy electron scattering from trichloromethane is measured utilizing a crossed electron-molecular beam experiment via the relative flow method, for the incident electron energies in the range of E = 0.5 eV-30 eV and the scattering angles in the range of θ = 10◦ − 130◦ .
-
On time-dependent nonlinear dynamic response of micro-elastic solids
PublikacjaA new approach to the mechanical response of micro-mechanic problems is presented using the modified couple stress theory. This model captured micro-turns due to micro-particles' rotations which could be essential for microstructural materials and/or at small scales. In a micro media based on the small rotations, sub-particles can also turn except the whole domain rotation. However, this framework is competent for a static medium....
-
Thermo-elastic non-linear analysis of multilayered plates and shells
PublikacjaGeometrically nonlinear FEM analysis of multilayered composite plates and shells is performed in order to resolve the stability problem of the structures being under the influence of temperature field. The Riks-Wempner-Ramm algorithm with a specially modified multi-choice unloading condition has been implemented in authors’ numerical code. As the representation of multilayered medium the Equivalent Single Layer approach with the...
-
On continuity conditions at the phase interface of two-phase elastic shells
PublikacjaW pracy rozwinięto ogólną nieliniową teorię powłok sprężystych podlegających przejściom fazowym typu martenzytowego. Przedstawione sformułowanie oparte jest na statycznie i kinematycznie ścisłym modelu powłokowym. Uwzględniono gęstośc energii odkształcenia, jak również siły i momenty zadane wzdłuż krzywoliniowego przejścia fazowego. W szczególności otrzymano statyczne warunki ciągłości wzdłuż koherentnego połączenia oraz połączenia...
-
Damage detection strategies based on propagation of guided elastic waves
PublikacjaW pracy przedstawiono wyniki symulacji numerycznych oraz badań eksperymentalnych nad wykorzystaniemprowadzonych falsprężystych do wykrywania ilokalizacji uszkodzeń w dwu i trójwymiarowych elementach konstrukcyjnych wykonanych z materiałów izotropowych i kompozytowych.
-
The high-energy critical minimum in elastic electron scattering by argon.
PublikacjaZostało zbadane położenie wysokoenergetycznego minimum krytycznego w rozpraszaniu elektronów na argonie. W celu przeprowadzenia dyskusji zachowania się czynnego przekroju różniczkowego w okolicy minimum krytycznego przeprowadzono analizę położenia minimum zarówno dla energii, jak i kątów.
-
Damage detection in composite truss structure by application of elastic waves.
PublikacjaW pracy przedstawiono zastosowanie fal sprężystych do detekcji pęknięć zmęczeniowych w konstrukcjach kompozytowych.
-
Impulsive lubrication of hip joint for hypo-elastic cartilage model
PublikacjaPraca rozwiązuje problem smarowania stawu biodrowego człowieka w warunkach niestacjonarnych z uwzględnieniem hypo-sprężystych (pod-sprężystych) właściwości odkształcalnej szkieletu chrząstki stawowej. Prezentowane są rozkłady wartości ciśnienia hydrodynamicznego oraz zmienne w czasie rozkłady wartości sił nośnych.
-
Asperities and deformations of hyper elastic joint cartilages in cultivation aspects
PublikacjaPraca opisuje wyniki badań procesu hodowli chrząstki stawowej w bioreaktorze podczas nieustalonego laminarnego przepływu nienewtonowskiej biologicznej cieczy odżywczej wokół chrząstki spoczywającej na rusztowaniu bioreaktora. Badania takie wymagają eksperymentalnego pomiaru chropowatości powierzchni chrząstki.
-
Damage detection in elements of strutures by the elastic wave propagation method.
PublikacjaW pracy przedstawiono wyniki badań dotyczace wykorzystania fal sprężystych do detekcji uszkodzeń i jedno i dwu wymiarowych elementach konstrukcyjnych.
-
Differential cross section minima in elastic scattering of electrons fromzinc
PublikacjaZostały obliczone położenia minimów różniczkowych przekrojów czynnych na sprężyste rozpraszanie elektronów na atomach cynku. Metoda obliczeniowa oparta jest na równaniach relatywistycznej mechaniki kwantowej. Wyniki obliczeń zostały porównane z ostatnimi danymi doświadczalnymi grupy z Uniwersytetu Belgradzkiego.