wyświetlamy 1000 najlepszych wyników Pomoc
Wyniki wyszukiwania dla: CHEMICALLY MODIFIED STARCHES
-
Ground Tire Rubber Modified by Ethylene-Vinyl Acetate Copolymer: Processing, Physico-Mechanical Properties, Volatile Organic Compounds Emission and Recycling Possibility
PublikacjaGround tire rubber (GTR) was reclaimed and modified with 10 phr of ethylene-vinyl acetate copolymer via low-temperature extrusion process. Processing, physico-mechanical properties, volatile organic compounds emission, and recycling possibility were investigated. In order to better understand the impact of used modifiers, their efficiency was compared with transpolyoctenamer, which is an additive that is commercially dedicated...
-
Experimental investigations on the mechanical properties and damage detection of carbon nanotubes modified crumb rubber concrete
PublikacjaThis study presents a modified crumb rubber (MCR) concrete design mix reinforced with multi-walled carbon nanotubes (MWCNTs), mechanical characterization, and cracking monitoring using the acoustic emission (AE) technique. The results showed that the bridging effect of MWCNTs and MCR in the concrete mix mitigated the shortcomings of MWCNT-MCR concrete and improved the flexural and compressive strengths by 18.3% and 26.5%, respectively,...
-
DETERMINATION OF THE HYDROXYL NUMBER OF GROUND TIRE RUBBER PARTICLES VIA MODIFIED TEST METHOD FOR ISOCYANATE GROUPS
PublikacjaNowadays, considering the environmental trends and law regulations associated with the circular economy, it is very important to seek for the methods of by-products and waste utilization. The example of such material, which requires the attention and recycling method is ground tire rubber generated during recycling of post-consumer car tires. It can be introduced into various polymer matrices as a filler, but to enhance its effectivity...
-
Antibacterial properties of TiO2 modified with reduced graphene oxide
Publikacja -
TiO2-Modified Magnetic Nanoparticles (Fe3O4) with Antibacterial Properties
Publikacja -
Modified acrylamide copolymers as flocculants for model aqueous suspensions
Publikacja -
Shear Strength of Organic Soils Modified by Mineral Materials
Publikacja -
Rational multistep methods via modified φj-functions
Publikacja -
The application of magnetically modified bacterial cellulose for immobilization of laccase
Publikacja -
Water Behavior of Emulsions Stabilized by Modified Potato Starch
Publikacja -
Biodegradability of modified emulsifiers - esters of polyols and fatty acids
PublikacjaBadano podatność na biodegradację wybranych emulgatorów estrów polioli i kwasów tłuszczowych przy użyciu testu zamkniętej butelki (OECD 301 D). Stwierdzono, że badane emulgatory nie mogą zostać uznane za łatwo ulegające biodegradacji. Najwyższy poziom rozkładu (57,3%) osiągnął emulgator C14Gna, najniższy (29,8%) AEGNa.
-
Properties of Cement Composites Modified with Silica-magnetite Nanostructures
Publikacja -
Biodegradation of modified poly(î-caprolactone) in different environments
PublikacjaPorównano odporność na biodegradację różnych filmów poliepsilon kaprolaktonu w wodzie morskiej z Bałtyku, w roztworze soli, w wodzie morskiej z azydkiem sodu oraz w kompoście z osadem czynnym. Oceniano zmiany ubytku wagi, lepkość właściwości wytrzymałościowe, stopień krystaliczności i morfologię przed i po procesie degradacji. Filmy z dodatkiem środków antypoślizgowych, degradowane w środowiskach naturalnych ulegały rozkładowi...
-
Photocatalytic degradation using nitrogen-modified titanium dioxide
PublikacjaPrzepływowy reaktor z wypełnieniem został zastosowany do przeprowadzenia fotodegradacji 4-chlorofenolu za pomocą światła widzialnego. Fotokatalizator w postaci tlenku tytanu(IV) modyfikowanego azotem, został naniesiony na powierzchnię kulek szklanych. Źródło światła widzialnego stanowiła 8W lampa fluorescencyjna. Powietrze było w sposób ciągły przepuszczane przez zawartość reaktora.
-
Epoxy/Ionic Liquid-Modified Mica Nanocomposites: Network Formation–Network Degradation Correlation
PublikacjaWe synthesized pristine mica (Mica) and N-octadecyl-N’-octadecyl imidazolium iodide (IM) modified mica (Mica-IM), characterized it, and applied it at 0.1–5.0 wt.% loading to prepare epoxy nanocomposites. Dynamic differential scanning calorimetry (DSC) was carried out for the analysis of the cure potential and kinetics of epoxy/Mica and epoxy/Mica-IM curing reaction with amine curing agents at low loading of 0.1 wt.% to avoid particle...
-
MAX phase ternary carbide derived 2-D ceramic nanostructures [CDCN] as chemically interactive functional fillers for damage tolerant epoxy polymer nanocomposites
Publikacja -
Drug affinity to human serum albumin prediction by retention of cetyltrimethylammonium bromide pseudostationary phase in micellar electrokinetic chromatography and chemically advanced template search descriptors
Publikacja -
Gas‐Phase Removal of Indoor Volatile Organic Compounds and Airborne Microorganisms Over Mono‐ and Bimetal‐Modified (Pt, Cu, Ag) Titanium(IV) Oxide Nanocomposites
PublikacjaThe photocatalytic deactivation of volatile organic compounds and mold fungi using TiO2 modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublikacjaIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Preparation and characterization of monometallic (Au) and bimetallic (Ag/Au) modified-titania photocatalysts activated by visible light
PublikacjaThe Au-TiO2 and Ag/Au-TiO2 nanoparticles have been prepared using a water-in-oil microemulsion system of water/AOT/cyclohexane and water/Triton X-100/cyclohexane. The obtained photocatalysts were subsequently characterized by a BET method, DRS spectroscopy, X-ray photoelectron emission spectroscopy (XPS), scanning transmission electron microscopy (STEM) and X-ray powder diffraction analysis (XRD). For gold-doped titanium (IV) oxide...
-
Potentiometric sensor containing set of ion selective electrodes with lipid modified membranes for quality assessment of tested non-alcoholic beverages
PublikacjaPotentiometric sensors may be a good tool for fast quality control of commercial drinks. In this work, such a sensor, containing a set of ion-selective electrodes with lipid-modified membranes (benzylhexadecyldimethylammonium chloride monohydrate, hexadecylamine, 1-dodecanol, elaidic acid, cholesterol) was used for discrimination and quality control of non-alcoholic beverages, mainly composed of sugar and citric acid. It was found...
-
Development of Technical Creativity Featuring Modified TRIZ-AM Inventive Principle to Support Design for Additive Manufacturing
Publikacjahe design for additive manufacturing (DFAM) processing was introduced to fully utilise the design freedom provided by additive manufacturing (AM). Consequently, appropriate design methodologies have become essential for this technology. Recently, many studies have identified the importance of DFAM method utilisation to produce AM parts, and TRIZ is a strategy used to formalise design methodologies....
-
Defective TiO2 Core-Shell Magnetic Photocatalyst Modified with Plasmonic Nanoparticles for Visible Light-Induced Photocatalytic Activity
PublikacjaIn the presented work, for the first time, the metal-modified defective titanium(IV) oxide nanoparticles with well-defined titanium vacancies, was successfully obtained. Introducing platinum and copper nanoparticles (NPs) as surface modifiers of defective d-TiO2 significantly increased the photocatalytic activity in both UV-Vis and Vis light ranges. Moreover, metal NPs deposition on the magnetic core allowed for the effective separation...
-
The bismuth vanadate thin layers modified by cobalt hexacyanocobaltate as visible-light active photoanodes for photoelectrochemical water oxidation
PublikacjaBismuth vanadate thin films deposited using the pulsed laser deposition technique were modified using cobalt hexacyanocobaltate (Cohcc). The 2-step method of Cohcc nanocubes preparation was applied: i) metallic cobalt deposition and ii) cobalt electrooxidation in Co(CN)63− containing electrolyte. The presence of CN stretching vibrations was confirmed by Raman spectroscopy. The energy band gap was equal to 2.5 eV and was estimated...
-
Electro-mechanical shear buckling of piezoelectric nanoplate using modified couple stress theory based on simplified first order shear deformation theory
PublikacjaThis paper studies the electro-mechanical shear buckling analysis of piezoelectric nanoplate using modified couple stress theory with various boundary conditions.In order to be taken electric effects into account, an external electric voltage is applied on the piezoelectric nanoplate. The simplified first order shear deformation theory (S-FSDT) has been employed and the governing differential equations have been obtained using...
-
Synthesis and photoelectrochemical behaviour of hydrogenated titania nanotubes modified with conducting polymer infiltrated by redox active network
PublikacjaIn this work, we show preparation of ordered inorganic-organic composite electrode material where hydrogenated titania nanotubes H-TiO2 with tubularly developed surface modified with poly(3,4-ethylenedioxythiophene) matrix permeated by Prussian Blue (PB) inorganic redox network in order to reach highly photoactive heterojunction. The polymer deposition was realized via two subsequent processes covering: i) potentiostatic polymerization...
-
A significance of multi slip condition for inclined MHD nano-fluid flow with non linear thermal radiations, Dufuor and Sorrot, and chemically reactive bio-convection effect
PublikacjaThe aim of this research is to discuss the significance of slip conditions for magnetized nanofluid flow with the impact of nonlinear thermal radiations, activation energy, inclined MHD, sorrot and dufour, and gyrotactic micro motile organisms over continuous stretching of a two-dimensional sheet. The governing equations emerge in the form of partial differential equations. Since the resultant governing differential equations...
-
Tensile strength test of PE foils modified with zinc oxide and zinc salts
Dane BadawczeThis dataset contains the results of PE foils mechanical tests, in which the material was evaluated for strength and extensibility at the moment of breaking and based on the same tests preceded by material fatigue in 50 stretching cycles. The principle of the method is to stretch the test sample placed in the clamps of the stretching apparatus at a...
-
Synthesis and thermal studies of flexible polyurethane nanocomposite foams obtained using nanoclay modified with flame retardant compound
PublikacjaThis work presents thermal studies of nanocomposites based on the flexible polyurethane (PU) matrix and filled using montmorillonite organically modified with organophosphorus flame retardant compound. Flexible PU nanocomposite foams were prepared in the reaction carried out between reactive alcoholic hydroxyl and isocyanate groups with the ratio of NCO to OH groups equal to 1.05. The amount of an organoclay ranging from 3 to 9...
-
Zeolitic imidazolate framework (ZIF-8) modified cellulose acetate NF membranes for potential water treatment application
PublikacjaIn this study, cellulose acetate (CA)-based nanofiltration membranes, modified with zeolitic imidazole framework-8 (ZIF-8) particles, were prepared with various ZIF-8 contents (0, 0.1, 0.25, 0.5, 1 and 2 wt%), to obtain membranes with improved flux and filtration performance by combining advantages of CA polymer and ZIF-8 metal-organic frameworks. Removal efficiency studies were carried out with bovine serum albumin and two different...
-
Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment
PublikacjaIn this paper, low-temperature extrusion of ground tire rubber was performed as a proecological waste tires recycling method. During this process, ground tire rubber was modified with constant content of dicumyl peroxide and a variable amount of elastomer (in the range: 2.5–15 phr). During the studies, three types of elastomers were used: styrene-butadiene rubber, styreneethylene/butylene-styrene grafted with maleic anhydride and...
-
Testing the Accuracy of the Modified ICP Algorithm with Multimodal Weighting Factors
Publikacja -
Laboratory investigation of graphene modified asphalt efficacy to pavement performance
Publikacja -
Optimal Multivariable Control for Modified Z-source Based IPT
Publikacja -
Solar Photocatalytic Degradation of Sulfamethoxazole by TiO2 Modified with Noble Metals
Publikacja -
Properties of Composite Modified with Limestone Powder for 3D Concrete Printing
Publikacja -
CHARACTERISATION OF CHITOSAN/HYALURONIC ACID BLEND FILMS MODIFIED BY COLLAGEN
Publikacja -
WETTABILITY OF CHITOSAN-MODIFIED AND LIPID/POLYPEPTIDE-COATED PEEK SURFACES
Publikacja -
Studies on nitrogen modified TiO2 photocatalyst prepared in different conditions
Publikacja -
Modified polycarbonate urethane: synthesis, properties and biological investigation in vitro
PublikacjaNowy poliweglano uretan (PCU-I) otrzymano z alifatycznych monomerów: poliwęglanu heksanodiolu, 4,4'diizocyjanianu dicykloheksanometanu, mieszaniny małocząsteczkowych dioli i oleju rycynowego (zawierającego głównie trigliceryd kwasu 12-hydroksyoleinowego). PCU-II otrzymano analogicznie ale bez udziału oleju rycynowego. Obydwa PCU charakteryzowały się dobrą wytrzymałością na rozciąganie. PCU-I miał niższą temperaturę zeszklenia a...
-
Effect of Genetically Modified Feeds on Physico-Chemical Properties of Pork
Publikacja -
Design and characteristics of gellan gum beads for modified release of meloxicam
Publikacja -
A modified static equivalency method for roll-on/roll-off vessels
PublikacjaPrzedstawiono zmodyfikowaną metodę statycznej równoważności dla statków ro-ro, opartą na wypiętrzaniu się wody na pokładzie samochodowym w wypadku wystąpienia otworu w burcie, do oceny bezpieczeństwa statku.
-
TiO2-Nitrogen Modified for Water Decolourisation under VIS Radiation
Publikacja -
TiO2-anatase modified by carbon as the photocatalyst under visible light
Publikacja -
Weather aging effects on modified asphalt with rubber-polyethylene composites
Publikacja -
Upcycling Waste Polypropylene into Graphene Flakes on Organically Modified Montmorillonite
Publikacja -
Dispersion, compatibility, and rheological properties of graphene-modified asphalt binders
Publikacja -
Preparation of Modified Titanate Nanotubes and Its Application in Polyurethane Nanocomposites
Publikacja -
Modified titanate nanotubes for the production of novel aliphatic polyurethane nanocomposites
Publikacja