Search results for: BINBO4, COMPOSITE, DIELECTRIC PROPERTY, IMPEDANCE SPECTROSCOPY, MICROMECHATRONIC MATERIALS, PVDF

• Dielectric Properties of BiNbO₄-Based Ceramic-Polymer Composites with 0-3 Connectivity

  Publication

  • A. Lisińska-Czekaj
  • J. Micior
  • M. Adamczyk
  • D. Czekaj

  - Key Engineering Materials - Year 2014

  In the present study two-phase BiNbO4//PVDF composites with 0-3 connectivity were studied by impedance spectroscopy within the frequency range Δν=100Hz-1MHz at room temperature. Polyvinylidene fluoride (PVDF) acted as a matrix whereas bismuth niobate (BiNbO4) powder acted as a dispersed phase. The volume fraction of the ceramic phase was cV=2, 4, 6, 8, 10, 16 and 20vol%. Analysis of the impedance data registered for composites...

  Full text to download in external service

• A New Microwave Ceramic – Polymer Composite with 0-3 Connectivity

  Publication

  • D. Czekaj
  • J. Micior
  • A. Lisińska-Czekaj

  - ARCHIVES OF METALLURGY AND MATERIALS - Year 2014

  Goal of the present research was to fabricate and study two-phase BiNbO4//PVDF composites with 0-3 connectivity. Such composite consists of there-dimensionally connected polymer matrix loaded with dielectric ceramic particles. In the present case BiNbO4 powder acted as an active phase (dispersed phase) whereas polyvinylidene fluoride (PVDF) acted as a non-active (passive) phase (matrix). BiNbO4//PVDF composites with the volume...

  Full text available to download

• Effects of V2O5 Additive on Structure and Dielectric Properties of BiNbO4 Ceramics

  Publication

  • A. Lisińska-Czekaj
  • D. Czekaj
  • K. Osińska
  • M. Adamczyk

  - ARCHIVES OF METALLURGY AND MATERIALS - Year 2013

  Goal of the present research was to investigate the influence of V2O5 additive on the structure and dielectric properties of BiNbO4 ceramics. To fabricate BiNbO4 ceramics with V2O5 added the solid state reaction route and pressureless sintering was utilized. Thus obtained ceramics was characterized in terms of its microstructure (SEM), chemical composition (EDS), phase composition and crystalline structure (X-ray phase and structural...

  Full text available to download

• Modelling of dielectric properties of BiNbO4-based microwave ceramics

  Publication

  • D. Czekaj
  • A. Lisińska-Czekaj
  • B. Garbarz-Glos
  • W. Bąk

  - ARCHIVES OF METALLURGY AND MATERIALS - Year 2020

  In the present paper results of the studies devoted to computer simulations of dielectric response of electroceramics in a frequency domain as well as analysis of the experimental data are given. As an object of investigations BiNbO4-based microwave ceramics was taken. Simulations of the hypothetical impedance response of the ceramic system were performed under assumption of the brick-layer model. A strategy for analysis and modelling...

  Full text available to download

• Characterization of Bi6Fe2Ti3O18 Ceramics with Impedance Spectroscopy

  Publication

  • A. Lisińska-Czekaj
  • D. Czekaj

  - MATERIALS SCIENCE FORUM - Year 2012

  In the present research the tool of impedance spectroscopy was utilized to characterize dielectric behavior of Aurivillius-type ceramics of Bi6Fe2Ti3O18 composition fabricated by hot pressing method from the stoichiometric mixture of oxides Bi2O3, TiO2 and Fe2O3. Impedance spectroscopy was applied to characterize dielectric response of bulk, grain boundary, and material/electrode interfaces of the fabricated polycrystalline ceramic...

  Full text to download in external service

• Enhanced capacitance of composite TiO2 nanotube / boron-doped diamond electrodes studied by impedance spectroscopy

  Publication

  • K. Siuzdak
  • M. Sawczak
  • R. Bogdanowicz
  • M. Sobaszek

  - NANOSCALE - Year 2015

  We report on the novel composite nanostructures based on boron-doped diamond thin film grown on top of TiO2 nanotubes. The nanostructures made of BDD-modified titania nanotubes showed an increase in activity and performance when used as electrodes in electrochemical environments. The BDD thin films (~200-500 nm) were deposited using microwave plasma assisted chemical vapor deposition (MW PA CVD) onto anodically fabricated TiO2...

  Full text to download in external service

• Dielectric Spectroscopy Studies and Modelling of Piezoelectric Properties of Multiferroic Ceramics

  Publication

  • A. Lisińska-Czekaj
  • D. Czekaj
  • B. Garbarz-Glos
  • W. Bąk
  • T. Tadeyos Zate
  • J. Jeon

  - Applied Sciences-Basel - Year 2023

  Compounds and solid solutions of bismuth ferrite (BiFeO3)—barium titanate (BaTiO3) system are of great scientific and engineering interest as multiferroic and potential high-temperature lead-free piezoelectric materials. In the present paper, the results of research on the synthesis and characterisation of 0.67Bi1.02FeO3–0.33BaTiO3 (67BFBT) ceramics in terms of crystal structure and dielectric and piezoelectric properties are reported....

  Full text available to download

• Low temperature broad band dielectric spectroscopy of multiferroic Bi6Fe2Ti3O18 ceramics

  Publication

  • A. Lisińska-Czekaj
  • M. Rerak
  • D. Czekaj
  • M. Lubina
  • B. Garbarz-Glos
  • W. Bąk

  - ARCHIVES OF METALLURGY AND MATERIALS - Year 2019

  In the present research the tool of broadband dielectric spectroscopy was utilized to characterize dielectric behavior of Bi6Fe2Ti3O18 (BFTO) Aurivillius-type multiferroic ceramics. Dielectric response of BFTO ceramics was studied in the frequency domain (Δν=0.1Hz – 10MHz) within the temperature range ΔT=-100°C – 200°C. The Kramers-Kronig data validation test was employed to validate the impedance data measurements and it was found...

  Full text available to download

• Selection of excitation signals for high-impedance spectroscopy

  Publication

  • M. Kowalewski

  - Journal of Physics : Conference Series - Year 2013

  A method of fast impedance spectroscopy of technical objects with high impedance (|Zx| > 1 GOhm) is evaluated in this paper. An object is excited with a signal generated by a digital-to-analog converter (DAC) located on the U2531A DAQ module. Response signals proportional to current flowing through and voltage across the measured object are sampled by analog-to-digital converters (ADC) in the DAQ module. The object impedance spectrum...

  Full text available to download

• Application of dynamic impedance spectroscopy to scanning probe microscopy.

  Publication

  • M. Tobiszewski
  • A. Arutunow
  • K. Darowicki

  - MICROSCOPY AND MICROANALYSIS - Year 2014

  Dynamic impedance spectroscopy, designed for measuring nonstationary systems, was used in combination with scanning probe microscopy. Using this approach, impedance mapping could be carried-out simultaneously with topography scanning. Therefore, correlation of electrical properties with particular phases of an examined sample was possible. The sample used in this study was spheroidal graphite cast iron with clearly defined phases...

  Full text to download in external service

• Piezoresponse force microscopy and dielectric spectroscopy study of Ba0.6Sr0.4TiO3 thin films

  Publication

  • D. Czekaj
  • A. Lisińska-Czekaj

  - Journal of Advanced Dielectrics - Year 2019

  Research on synthesis, characterization and determination of processing – structure – property relationships of commercially important ferroelectric thin films has been performed. The sol-gel-type solution deposition technique was applied to produce good quality thin films of Ba0.6Sr0.4TiO3 (BST60/40) chemical composition on the stainless steel substrates. The thin films were characterized in terms of their microstructure, crystal...

  Full text available to download

• Fast High-Impedance Spectroscopy Method Using SINC Signal Excitation

  Publication

  • M. Kowalewski
  • G. Lentka

  - Metrology and Measurement Systems - Year 2013

  In this paper the method of fast impedance spectroscopy of technical objects with high impedance (|Zx| > 1 Gohm) is evaluated by means of simulation and practical experiment. The method is based on excitation of an object with a sinc signal and sampling response signals proportional to current flowing through and voltage across the measured impedance. The object impedance spectrum is obtained with use of continuous Fourier transform...

  Full text available to download

• Evaluation of the fast impedance spectroscopy method in the laboratory measurement system

  Publication

  • M. Kowalewski
  • G. Lentka
  • J. Hoja

  - Year 2012

  In this paper the method for fast impedancespectroscopy of technical objects with very high impedance(|Zx| ≥ 1 GΩ) is evaluated by means of simulation and practicalexperiment. The method is based on excitation of an object, witha square pulse and measurements of voltage and currentresponses with DAQ card. The object impedance spectrum isobtained with use of continuous Fourier transform. Someimprovements of the method concerned...

  Full text to download in external service

• Application of Impedance Spectroscopy for Bi1−xNdxFeO3 Ceramics Characterization

  Publication

  • B. Wodecka-Dus
  • J. Dzik
  • H. Bernard
  • K. Osińska
  • A. Lisińska-Czekaj
  • D. Czekaj

  - MATERIALS SCIENCE FORUM - Year 2012

  In the present paper the synthesis conditions for fabrication of Bi1−xNdxFeO3 ceramics are reported. The single phase polycrystalline samples of Bi1−xNdxFeO3 were prepared by standard solid state reaction method from the mixture of oxides viz.: Bi2O3, Fe2O3 and Nd2O3. The samples were characterized by impedance spectroscopy in the frequency range 10Hz – 1MHz at room temperature.

  Full text to download in external service

• Local electrochemical impedance spectroscopy in dynamic mode of galvanic coupling

  Publication

  • Ł. Burczyk
  • K. Darowicki

  - ELECTROCHIMICA ACTA - Year 2018

  A novel method that combines local electrochemical impedance spectroscopy and mapping in dynamicmode is proposed. Method was validated over two galvanic couplings, namely zinc/copper and cad-mium/copper. Impedance spectrum response for all measuring points was obtained by means ofsimultaneous implementation of selected range of frequencies. Proposed method allows the measure-ment in a more time-efficient manner, at the same time...

  Full text to download in external service

• Electrochemical Evaluation of Sustainable Corrosion Inhibitors via Dynamic Electrochemical Impedance Spectroscopy

  Publication

  • P. Ślepski
  • H. Gerengi
  • G. Gece
  • E. Kaya
  • M. Rizvi
  • M. Szociński

  - Year 2021

  Finding suitable measurement methods for the effective management of electrochemical problems is of paramount importance, particularly for improving efficiency in corrosion protection. The need for accurate measurement techniques specific to nonstationary conditions has long been recognized, and promising approaches have emerged. This chapter introduces dynamic electrochemical impedance spectroscopy as a novel advancement in electrochemistry...

  Full text to download in external service

• Sensing the onset of epoxy coating degradation with combined Raman spectroscopy/atomic force microscopy/electrochemical impedance spectroscopy

  Publication

  • M. Szociński
  • K. Darowicki

  - PROGRESS IN ORGANIC COATINGS - Year 2023

  The paper presents the results of investigation on epoxy resin durability upon 12-week exposure to UV radiation. The aim was early determination of the onset of epoxy degradation and for this purpose an epoxy film on steel substrate systems were periodically inspected using Raman spectroscopy, atomic force microscopy and electrochemical impedance spectroscopy. The behaviour of examined polymer could be divided into three periods: immunity,...

  Full text to download in external service

• Electrical and mechanical characterization of two-phase alloys by means of scanning probe microscopy in dynamic impedance spectroscopy mode

  Publication

  • A. Arutunow
  • M. Tobiszewski
  • K. Darowicki

  - JOURNAL OF ALLOYS AND COMPOUNDS - Year 2015

  Dynamic impedance spectroscopy, evaluated for measuring non-stationary systems, was used in combination with scanning probe microscope. Using this approach, localized impedance measurements in the AFM contact mode could be carried out. Additionally, impedance–force curves were made at each phase of investigated materials to illustrate the relation between impedance and the force applied to a probe. Therefore, correlation of electrical...

  Full text to download in external service

• Application of different modes of nanoscale impedance microscopy in materials research

  Publication

  • A. Zieliński

  - Surface Innovations - Year 2015

  In recent years, there is noticeable interest in application of various types of scanning probe microscopy in material science research. One of them is contact atomic force microscopy combined with local impedance measurements, known as nanoscale impedance microscopy. Literature references present its application in investigations of new materials, microelectronics diagnostics, or research of protective coatings performance. In...

  Full text to download in external service

• Validity of impedance spectra obtained by dynamic electrochemical impedance spectroscopy verified by Kramers-Kronig transformation.

  Publication

  • K. Darowicki
  • J. Kawula

  - Year 2004

  Artykuł przedstawia weryfikację wiarygodności widm impedancyjnych otrzymanych za pomocą niedawno wprowadzonej techniki eksperymentalnej - Dynamicznej Elektrochemicznej Spektroskopii Impedancyjnej (Dynamic Electrochemical Impedance Spectroscopy, DEIS). Technika ta zakłada, że badany system jest pseudostacjonarny jeśli czas pomiaru jest odpowiednio krótki. Czas potrzebny na otrzymanie pojedynczego spektrum zależy od długości okna...

• Enhanced capacitance of composite TiO2 nanotube/boron-doped diamond electrodes studied by impedance spectroscopy

  Publication

  • K. Siuzdak
  • R. Bogdanowicz
  • M. Sawczak
  • M. Sobaszek

  - NANOSCALE - Year 2015

  Full text to download in external service

• Remote Monitoring System for Impedance Spectroscopy using Wireless Sensor Network

  Publication

  • M. Kowalewski
  • G. Lentka

  - Year 2012

  The architecture of a miniaturized impedanceanalyser with wireless communication module for remoteImpedance Spectroscopy (IS) of anticorrosion coatings ondifficult-to-reach objects (e.g. on the steel construction ofthe bridge) is described in this paper. Some practical aspectsof implementation of a Wireless Sensor Network (WSN) arealso discussed. A low scale, middle range, WSN networkcomposed of a Base Station (BS) with a Personal...

  Full text to download in external service

• Biosilica from sea water diatoms algae—electrochemical impedance spectroscopy study

  Publication

  • A. Nowak
  • A. Lisowska-Oleksiak
  • B. Wicikowska
  • M. Gazda

  - JOURNAL OF SOLID STATE ELECTROCHEMISTRY - Year 2017

  Here, we report on an electrochemical impedance study of silica of organic origin as an active electrode material. The electrode material obtained from carbonized marine biomass containing nanoporous diatoms has been characterised by means of XRD, IR, SEM and EIS. Dif- ferent kinds of crystallographic phases of silica as a result of thermal treatment have been found. The electrode is electrochemically stable during subsequent cyclic...

  Full text available to download

• Study of Direct Methanol Fuel Cell Process Dynamics Using Dynamic Electrochemical Impedance Spectroscopy

  Publication

  • K. Darowicki
  • E. Janicka
  • P. Ślepski

  - International Journal of Electrochemical Science - Year 2012

  A new technique, which was developed to characterize the direct methanol fuel cell under work conditions, has been presented in this paper. The impedance measurements were made using dynamic electrochemical impedance spectroscopy research technique in the galvanostatic mode, using multiple sinusoidal excitation. Obtained results show, that together with an increase of the temperature and working load, the global impedance...

  Full text to download in external service

• Local impedance spectroscopy of membranes

  Publication

  • K. Darowicki
  • M. Szociński

  - JOURNAL OF MEMBRANE SCIENCE - Year 2007

  Celem niniejszej publikacji jest zaprezentowanie zastosowania techniki Lokalnej Elektrochemicznej Spektroskopii Impedancyjnej (LEIS) do uzyskania lokalnej charakterystyki membran. Membranę wykonaną z polichlorku winylu (PCV), plastyfikowaną sebacynianem bis(2etyloheksylu) i domieszkowaną boranem tetradodecyloamoniowym zbadano pod kątem równomiernego rozkładu przewodnictwa na powierzchni badanej próbki. Lokalne pomiary impedancyjne,...

• Local impedance spectroscopy of membranes

  Publication

  • K. Darowicki
  • M. Szociński
  • K. Darowicki

  - JOURNAL OF MEMBRANE SCIENCE - Year 2007

  Full text to download in external service

• Correction methods in impedance spectroscopy

  Publication

  • A. Poliński
  • T. Pałko

  - Year 2005

  W pracy przedstawiono trzy grupy metod, ktÓre mogą być zastosowane do korekcji danych pomiarowych uzyskanych za pomoca spektroskopii impedancyjnej.

• Determination of pitting corrosion stage of stainless steel by galvanodynamic impedance spectroscopy

  Publication

  • J. Orlikowski
  • A. Jażdżewska
  • R. Mazur
  • K. Darowicki

  - ELECTROCHIMICA ACTA - Year 2017

  This paper investigates the methodology for differentiation of multistep process of pitting corrosion of AISI 304 stainless steel in the environment of iron (III) chloride. Measurements were performed using Galvanodynamic Electrochemical Impedance Spectroscopy (GDEIS). Application of this methodology allowed monitoring of natural corrosion process without external current (IDC = 0A) nor potential perturbation of the system. Applied...

  Full text to download in external service

• New Method of Non-Linear Electrochemical Impedance Spectroscopy with an Amplitude-Modulated Perturbation Signal

  Publication

  • P. Ślepski
  • M. Szociński
  • J. Majcherczak
  • H. Gerengi
  • K. Darowicki

  - JOURNAL OF THE ELECTROCHEMICAL SOCIETY - Year 2019

  The paper presents a new method of non-linear electrochemical impedance spectroscopy (NLEIS), which allows fast and nondestructive evaluation of the corrosion rate and determination of the Tafel coefficients values for a corrosion system under investigation. This method employs amplitude modulation of the ac perturbation signal. The study demonstrated that it was possible to obtain impedance characteristic as a function of the...

  Full text to download in external service

• Impedance spectroscopy studies on hybrid materials consisting of poly(3,4-ethylenedioxythiophene) and iron, cobalt and nickel hexacyanoferrate

  Publication

  • A. Lisowska-Oleksiak
  • A. Nowak

  - SOLID STATE IONICS - Year 2008

  Badania warstw polimeru pEDOT modyfikowanego heksacyjanożelazianami żelaza, kobaltu i niklu przeprowadzono za pomocą spektroskopii impedancyjnej (SI). Wykazano, że materiały hybrydowe charakteryzują się dobrą stabilnością. Warstwy testowano w zakresie temperatur od 283 do 313K. w kontakcie z wodnym roztworem KCl. Wysokie współczynniki dyfuzji wskazują na możliwości wykorzystania układów jako przewodników jonowych.

• Distribution of relaxation times as a method of separation and identification of complex processes measured by impedance spectroscopy

  Publication

  • J. Bartoszek
  • Y. Liu
  • J. Karczewski
  • S. Wang
  • A. Mroziński
  • P. Jasiński

  - Year 2017

  Impedance spectroscopy is one of the most commonly performed measurements to characterize electronic and electrochemical systems. Impedance spectra have limited resolution and many different processes may overlap what could be the reason of obstructions in its proper later analysis. Up to date, there are three approaches to solve this problem: examining impedance spectra itself, fitting spectra with equivalent circuits, and calculating...

  Full text to download in external service

• Analyzer for spectroscopy of low-impedance objects

  Publication

  • J. Hoja
  • G. Lentka

  - Metrology and Measurement Systems - Year 2009

  W artykule przedstawiono analizator umożliwiający pomiar impedancji w zakresie 1 ohma < |Zx| < 100 Mohma. Zastosowano w nim nowe rozwiązania dotyczące obwodu wejściowego i techniki detekcji fazoczułej sygnałów pomiarowych. Obwód wejściowy zaprojektowano w postaci 5-zaciskowej sondy pomiarowej, która umożliwia ograniczenie wpływu rezystancji, indukcyjności i pojemności pasożytniczych na błąd pomiaru impedancji w szerokim przedziale...

  Full text available to download

• Impedance spectroscopy of single chamber SOFC.

  Publication

  • P. Jasiński
  • T. Suzuki
  • F. Dogan
  • H. U. Anderson

  - Year 2004

  Mechanizm działania jednokomorowego ogniwa paliwowego SOFC, które pracuje w mieszaninie powietrza i paliwa, nie jest do końca zbadany. W tej pracy przedstawiono wyniki badań ogniwa paliwowego zbudowanego z tlenku cyrkonu stabilizowanego itrem jako nośnego elektrolitu, cermetu z tlenku niklu jako anody i perovskitu LSCF jako katody w temperaturach 500-700C z użyciem mieszaniny propanu i powietrza. Wykorzystując spektroskopię impedancyjną...

• Impedance spectroscopy of undoped cerium oxide.

  Publication

  • P. Jasiński
  • T. Suzuki
  • H. U. Anderson

  - Year 2003

  W pracy przedstawiono badania impedancyjne niedomieszkowanego tlenku ceru. Wyniki wskazują na występowanie zjawiska dyfuzji,???? które nie są (.. jest.?)związane z odpowiedzią elektrodową. Rozważania teoretyczne dopuszczają obserwowanie impedancji Warburga, która reprezentuje zjawisko dyfuzji w przewodnikach mieszanych, jednakże niewiele informacji na ten temat można znaleźć w literaturze. W związku z tym szczegółowe badania zródła...

• The electrochemical impedance spectroscopy studies of the anode material based on polymer and starch derived ceramic for lithium ion batteries

  Publication

  • A. Nowak
  • A. Lisowska-Oleksiak

  - Biuletyn Polskiego Stowarzyszenia Wodoru i Ogniw Paliwowych - Year 2013

  The anode materials derived of preceramic polymer poly(1,2-dimethylsilazane) (PSN) and starch was study. Commercially available polysilazane (poly(1,2-dimethylsilazane (PSN 2M01 Gelest) was mixed with commercially available starch (POCH Gliwice). The ratio polymer/starch (PSN/starch) was 1/1 or 3/7. The polysialazane/starch blend was cross-linked at 230 ºC for 2 h followed by heating to the final temperature (500 ºC, 700 ºC and...

• Evaluation of Temperature Influence on Electrochemical Processes Occurring in a Lithium-Ion Supercapacitor with the Use of Dynamic Electrochemical Impedance Spectroscopy

  Publication

  • M. Mielniczek
  • E. Janicka
  • Ł. Gaweł
  • K. Darowicki

  - ENERGIES - Year 2021

  In order to obtain the full impedance characteristics of a lithium-ion capacitor as a function of temperature, the authors proposed the use of dynamic electrochemical impedance spectroscopy. Impedance tests were carried out under wide range of dynamic temperature changes for lithium-ion supercapacitors. Significant differences in electrochemical processes were observed as a result of working temperature. Moreover, the quality of...

  Full text available to download

• Engineering of composite materials made of epoxy resins modified with recycled fine aggregate

  Publication

  • K. Krzywiński
  • Ł. Sadowski
  • M. Piechówka-Mielnik

  - Science and Engineering of Composite Materials - Year 2021

  Full text to download in external service

• Application of galvanodynamic impedance spectroscopy for studying passive film cracking under mechanical strain

  Publication

  • J. Orlikowski
  • K. Jurak
  • K. Darowicki
  • M. Szociński
  • A. Karólkowska
  • S. Wysmułek
  • M. Kalinowski

  - ELECTROCHIMICA ACTA - Year 2023

  The paper reports the results of simultaneous mechanical and electrochemical investigations on austenitic (18/8) stainless steel in a 2 % solution of sulphuric acid. The measurements were performed using Galvanodynamic Electrochemical Impedance Spectroscopy (GDEIS). Electrochemical analysis of mechanical passive layer cracking and repassivation conditions during a tensile test was carried out. Application of this methodology allowed...

  Full text to download in external service

• Properties of New Composite Materials Based on Hydroxyapatite Ceramic and Cross-Linked Gelatin for Biomedical Applications

  Publication

  • M. Bartmański
  • M. Rościszewska
  • M. Wekwejt
  • A. Ronowska
  • M. Nadolska-Dawidowska
  • A. D. Mielewczyk-Gryń

  - INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES - Year 2022

  The main aim of the research was to develop a new biocompatible and injectable composite with the potential for application as a bone-to-implant bonding material or as a bone substitute. A composite based on hydroxyapatite, gelatin, and two various types of commercially available transglutaminase (TgBDF/TgSNF), as a cross-linking agent, was proposed. To evaluate the impacts of composite content and processing parameters on various...

  Full text available to download

• Raman Spectroscopy for Investigation of Sol-Gel Materials and Ceramic Materials.

  Publication

  • M. Gnyba

  - Year 2004

  Przedstawiono rezultaty prac nad zastosowanie spektroskopii ramanowskiej do badania polimerów hybrydowych wytwarzanych metodą zol-żel oraz ceramik ferroelektrycznych. Wykonano pomiary dla próbek objętościowych i struktur cienkowarstwowych. Zademonstrowano możliwośc monitorowania procesu syntezy w czasie rzeczywistym.

• Instantaneous electrochemical impedance spectroscopy of electrode reactions

  Publication

  • K. Darowicki
  • P. Ślepski
  • K. Darowicki

  - ELECTROCHIMICA ACTA - Year 2004

  Full text to download in external service

• Instantaneous electrochemical impedance spectroscopy of electrode reactions.

  Publication

  • K. Darowicki
  • P. Ślepski

  - Year 2004

  Ustalona została ciągła transformata STFT sinusoidalnego sygnału pobudzeniai odpowiedzi prądowej dla pierwszorzędowej reakcji elektrodowej. Impedancja elektrodowa wyznaczona została w łącznej dziedzinie czasowo-częstotliwościowej. Wykonano pomiary reakcji redukcji Cd(II) na kapiącej elektrodzie rtęciowej w funkcji czasu. Zaprezentowano możliwość wyznaczania chwilowych widm impedancyjnych. Opisano czasowe charakterystyki rezystancji...

• Evaluation of coating systems using impedance spectroscopy

  Publication

  • A. Miszczyk
  • K. Darowicki

  - Year 2005

  Trwałość powłokowych systemów ochronnych zależy od oddziaływań środowiska i związana jest nieodwracalnymi procesami chemicznymi i fizycznymi. Zastosowanie spektroskopii impedancyjnej pozwala na określenie obszaru zastosowań danej powłoki i prognozowanie okresu jej trwałości. W pracy zamieszczono przykłady oceny trwałości systemów powłokowych stosowanych w strategicznych konstrukcjach.

• Dynamic Electrochemical Impedance Spectroscopy (DEIS) as a Tool for Analyzing Surface Oxidation Processes on Boron-Doped Diamond Electrodes

  Publication

  • J. Ryl
  • R. Bogdanowicz
  • P. Ślepski
  • M. Sobaszek
  • K. Darowicki

  - JOURNAL OF THE ELECTROCHEMICAL SOCIETY - Year 2014

  Surface oxidation processes play a key role in understanding electrochemical properties of boron-doped diamond (BDD) electrodes. The type of surface termination groups, which create the potential window of electrolytic water stability or hydrophobicity, influences such properties. In this study the kinetics of oxidation process under anodic polarization were studied in situ by means of Dynamic Electrochemical Impedance Spectroscopy...

  Full text to download in external service

• Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy

  Publication

  • J. Wysocka
  • S. Krakowiak
  • J. Ryl
  • K. Darowicki

  - JOURNAL OF ELECTROANALYTICAL CHEMISTRY - Year 2016

  The paper presents the electrochemical behaviour of aluminium alloy AA1050 in aqueous alkaline media in the pH range 14–8.5. Electrochemical study was applied in order to obtain comprehensive information on the mechanism and kinetics of the process of anodic dissolution of aluminium, supplemented by monitoring of surface topography using an electron microscope. The corrosion rate of AA1050 increases with increasing concentration...

  Full text to download in external service

• Composite Materials Based on Polymer-Derived SiCN Ceramic and Disordered Hard Carbons as Anodes for Lithium-Ion Batteries

  Publication

  • M. Wilamowska-Zawłocka
  • M. Graczyk-Zajac
  • R. Riedel

  - JOURNAL OF POWER SOURCES - Year 2013

  New composite materials based on polymer-derived SiCN ceramics and hard carbons were studied in view of its application as anodes for lithium-ion batteries. Two kinds of composites were prepared by pyrolysis of the preceramic polysilazane (HTT1800, Clariant) at 1000 °C in Ar atmosphere mixed with hard carbons derived from potato starch (HC_PS) or with a hard carbon precursor, namely potato starch (PS), denoted as HTT/HC_PS and...

  Full text to download in external service

• Impedance Investigations of the Mechanism of Oxygen Evolution on Composite Electrodes

  Publication

  • K. Darowicki
  • K. Darowicki

  - JOURNAL OF THE ELECTROCHEMICAL SOCIETY - Year 1999

  Full text to download in external service

• A Probe into the Corrosion Behavior of a WE43B Magnesium Alloy in a Simulated Body Fluid using Dynamic Electrochemical Impedance Spectroscopy

  Publication

  • H. Gerengi
  • S. Lorenzi
  • M. Solomon
  • P. Ślepski
  • M. Cabrini

  - JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE - Year 2023

  WE43B is one of the newest Mg alloys with practical application in biomedical implant technology. This work attempts to scrutinize the corrosion characteristics of WE43B alloy in a simulated body fluid (SBF) at a typical body temperature. The dynamic-electrochemical impedance spectroscopy with the capacity to track changes on surfaces in a dynamic corrosive system is used in combination with other classical techniques namely, linear...

  Full text to download in external service

• Solid State Conductivity of Optimized Polypyrrole Coatings on Iron Obtained from Aqueous Sodium Salicylate Solution Determined by Impedance Spectroscopy

  Publication

  • K. Cysewska
  • F. Singer
  • P. Jasiński
  • S. Virtanen

  - International Journal of Electrochemical Science - Year 2014

  In this work the optimization procedure for corrosion resistance, surface analysis and electrical properties of PPy-Fe electrodes have been examined. Polypyrrole (PPy) film was electrochemically synthesized in a one step process from an aqueous solution of sodium salicylate and pyrrole with certain concentrations, different parameters and type of polymerization...

  Full text available to download

• Failure Analysis of footbridge made of composite materials

  Publication

  • J. Chróścielewski
  • I. Kreja
  • A. Sabik
  • B. Sobczyk
  • W. Witkowski

  - Year 2014

  Finite element method analysis of a pedestrian footbridge made of sandwich material is presented. The internal structure of the material is modelled as a structural shell assuming the Equivalent Single Layer approach (ESL). Two FEM commercial codes are employed. The response of the structure is studied in order to determine the load level that activates Hashin and Tsai-Wu failure criteria. Some practical aspects of designing footbridges...