Filters
total: 49
Search results for: FITNESS-FOR-PURPOSE
-
Stress–strain model of lower corroded steel plates of normal strength for fitness-for-purpose analyses
PublicationThis study investigates the mechanical properties of specimens made of normal strength steel subjected to lower marine immersed corrosion degradation levels (below 25 %). The specimens were corroded in laboratory conditions, and only natural factors were controlled to raise the corrosion rate (reaching the level of 1 mm/year). Three different thicknesses of plates made of normal strength of shipbuilding steel are investigated (between...
-
Assessment of fitness for service of Cr-Mo steel tubes in catalytic reforming charge heaters
PublicationIn this paper characteristic features of metal dusting corrosion in high temperature gas mixtures of high carbon activity in catalytic reforming units, including Continuous Catalyst Regeneration (CCR) platformer are presented. Examples of 2.25Cr-1Mo and 9Cr-1Mo steel tubes at advanced stages of metal dusting process after long-term service in charge heaters are used to prove that destructive examinations are necessary to provide...
-
Solving highly-dimensional multi-objective optimization problems by means of genetic gender
PublicationPaper presents a computational optimization study using a genetic gender approach for solving multi-objective optimization problems of detection observers. In this methodology the information about an individual gender of all the considered solutions is applied for the purpose of making distinction between different groups of objectives. This information is drawn out of the fitness of individuals and applied during a current parental...
-
Solving highly-dimensional multi-objective optimization problems by means of genetic gender
PublicationPaper presents a computational optimization study using a genetic gender approach for solving multi-objective optimization problems of detection observers. In this methodology the information about an individual gender of all the considered solutions is applied for the purpose of making distinction between different groups of objectives. This information is drawn out of the fitness of individuals and applied during a current parental...
-
Termination functions for evolutionary path planning algorithm
PublicationIn this paper a study of termination functions (stop criterion) for evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Five...
-
Comparison of Single and Multi-Population Evolutionary Algorithm for Path Planning in Navigation Situation
PublicationIn this paper a comparison of single and multi-population evolutionary algorithm is presented. Tested algorithms are used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. Principle of operation of single-population and multi-population evolutionary algorithm is described....
-
Impact of Initial Population on Evolutionary Path Planning Algorithm
PublicationIn this paper an impact of initial population on evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal shippaths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Four tests are performed....
-
Impact of Initial Population on Evolutionary Path Planning Algorithm
PublicationIn this paper an impact of initial population on evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Four tests are performed....
-
Path planning algorithm for ship collisions avoidance in environment with changing strategy of dynamic obstacles
PublicationIn this paper a path planning algorithm for the ship collision avoidance is presented. Tested algorithm is used to determine close to optimal ship paths taking into account changing strategy of dynamic obstacles. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. Principle of operation of evolutionary algorithm and based on it dedicated application...
-
Novel sorptive extraction techniques in bioanalysis evaluated by Blue Applicability Grade Index: The paradigm of fabric phase sorptive extraction and capsule phase microextraction
PublicationFabric phase sorptive extraction (FPSE) and capsule phase microextraction (CPME) are two sol-gel derived microextraction techniques that emerged in the last decade towards the minimization of the environmental impact of conventional sample preparation approaches. Complementary to the well-established green metric tools, Blue Applicability Grade Index (BAGI) was recently proposed for the evaluation of method’s practicability. In...
-
On the Use of Selected 4th Generation Nuclear Reactors in Marine Power Plants
PublicationThis article provides a review of the possibility of using different types of reactors to power ships. The analyses were carried out for three different large vessels: a container ship, a liquid gas carrier and a bulk carrier. A novelty of this work is the analysis of the proposal to adapt marine power plants to ecological requirements in shipping by replacing the conventional propulsion system based on internal combustion engines...
-
The Niching Mechanism in the Evolutionary Method of Path Planning
PublicationThis paper presents the concept of the niching mechanism in the evolutionary method of path planning. The problem is considered based on the example of a ship path planning. In this method the diversity of individuals is tested in respect to their physical distance, not the fitness function value. The researches show that such an approach increases effectiveness of solution space exploration, what results in a final solution with...
-
Evolutionary Ship Track Planning within Traffic Separation Schemes – Evaluation of Individuals
PublicationThe paper presents an extended version of the author’s Evolutionary Sets of Safe Ship Trajectories method. The method plans safe tracks of all ships involved in an encounter including speed reduction manoeuvres, if necessary, and taking into account Rule 10 of COLREGS, which specifies ships’ behaviour within Traffic Separation Schemes governed by IMO. The paper focuses on the evaluation phase of the evolutionary process and shows...
-
Shape Optimisation of Kaplan Turbine Blades Using Genetic Algorithms
PublicationThis monograph is a comprehensive guide to a method of blade profile optimisation for Kaplan-type turbines. This method is based on modelling the interaction between rotor and stator blades. Additionally, the shape of the draft tube is investigated. The influence of the periodic boundary condition vs. full geometry is also discussed. Evolutionary algorithms (EA) are used as an optimisation method together with artificial neural...
-
Optimizing the process of railway geometrical layout designing with multi-criteria assessment method
PublicationThe paper presents the main assumptions of the Multi-criteria assessment method used in process of upgrading the railway geometrical layout. The advantages of metaheuristic search were described. The criteria influencing the investment were defined. The fitness function used in the analysis was described. The example of using the optimization algorithm with the help of self developed computer software was described.
-
Abstract class method use on common characteristics of UE regions for better road safety management in these regions.
PublicationRoad Safety is the significant problem requiring still a lot of attention. Despite lots of actions for road fatalities reduction, in many countries or regions situation doesn't improve as good as in the other cases. Even if these actions are very similar. It is so difficult issue, that the answer why is that happens hasn't been found yet. In this paper authors focused on the road network of European regions, classified as NUTS...
-
Reinforcement Learning Algorithm and FDTD-based Simulation Applied to Schroeder Diffuser Design Optimization
PublicationThe aim of this paper is to propose a novel approach to the algorithmic design of Schroeder acoustic diffusers employing a deep learning optimization algorithm and a fitness function based on a computer simulation of the propagation of acoustic waves. The deep learning method employed for the research is a deep policy gradient algorithm. It is used as a tool for carrying out a sequential optimization process the goal of which is...
-
Escherichia coli Strains with Virulent Factors Typical for Uropathogens were Isolated from Sinuses from Patients with Chronic Rhinosinusitis—Case Report
PublicationEscherichia coli were isolated from three patients with chronic rhinosinusitis (CRS) by intraoperative sinus tissue biopsy. Taking into account the unusual replicative niche and previous treatment failures, it was decided to focus on the virulence and drug resistance of these bacteria. The strains turned out to be multi-sensitive, but the rich virulence factors profile of bacteria typical for phylogenetic group B2 deserved attention....
-
Gender approach to multi-objective optimization of detection systems by pre-selection of criteria
PublicationA novel idea of performing evolutionary computations for solving highly-dimensional multi-objective optimization (MOO) problems is proposed. The information about individual genders is applied. This information is drawn out of the fitness of individuals and applied during the parental crossover in the evolutionary multi-objective optimization (EMO) processes. The paper introduces the principles of the genetic-gender approach (GGA)...
-
Gender approach to multi-objective optimization of detection systems by pre-selection of criteria
PublicationA novel idea of performing evolutionary computations for solving highly-dimensional multi-objective optimization (MOO) problems is proposed. The information about individual genders is applied. This information is drawn out of the fitness of individuals and applied during the parental crossover in the evolutionary multi-objective optimization (EMO) processes. The paper introduces the principles of the genetic-gender approach (GGA)...
-
Gender approach to multi-objective optimization of detection systems by pre-selection of criteria
PublicationA novel idea of performing evolutionary computations for solving highly-dimensional multi-objective optimization (MOO) problems is proposed. The information about individual genders is applied. This information is drawn out of the fitness of individuals and applied during the parental crossover in the evolutionary multi-objective optimization (EMO) processes. The paper introduces the principles of the genetic-gender approach (GGA)...
-
Exercise bike powered electric generator for fitness club appliances
PublicationA generator powered by a stationary bicycle for the purposes of generating electricity for fitness club appliances is considered. A generator is connected to a stationary bicycle in such a way as the circular rotation of the front wheel rotates the coils of wires inside the generator between the poles of the magnets inside the generator. The resulting Direct Current is channeled to the attached battery bank and converted into different...
-
Genetic Algorithm Approach for Gains Selection of Induction Machine Extended Speed Observer
PublicationThe subject of this paper is gains selection of an extended induction machine speed observer. A high number of gains makes manual gains selection difficult and due to nonlinear equations of the observer, well-known methods of gains selection for linear systems cannot be applied. A method based on genetic algorithms has been proposed instead. Such an approach requires multiple fitness function calls; therefore, using a quality index...
-
Evolutionary Sets of Safe Ship Trajectories: development of the method
PublicationThe Evolutionary Sets of Safe Ship Trajectories is a method solving ship encounter situations. The method combines evolutionary approach to planning ship trajectory with some of the assumption of game theory. For given positions and motion parameters the method finds a near optimal set of safe trajectories of all ships involved in an encounter. The version presented here is an updated one and its authors have tested extensively...
-
Experimental research on evolutionary path planning algorithm with fitness function scaling for collision scenarios
PublicationThis article presents typical ship collision scenarios, simulated using the evolutionary path planning system and analyses the impact of the fitness function scaling on the quality of the solution. The function scaling decreases the selective pressure, which facilitates leaving the local optimum in the calculation process and further exploration of the solution space. The performed investigations have proved that the use of scaling...
-
Evolutionary sets of safe ship trajectories with speed reduction manoeuvres within traffic separation schemes
PublicationIn the previous paper the author presented the evolutionary ship trajectory planning method designed to support Traffic Separation Schemes (TSS). This time the extensions of this method are described which allow to combine evolutionary trajectory planning with speed reduction manoeuvres. On TSS regions with higher than usual density of traffic and smaller distances between ships, the course alterations alone are not always sufficient...
-
Comparison of reproduction strategies in genetic algorithm approach to graph searching
Publicationgenetic algorithms (ga) are a well-known tool used to obtain approximate solutions to optimization problems. successful application of genetic algorithm in solving given problem is largely dependant on selecting appropriate genetic operators. selection, mutation and crossover techniques play a fundamental role in both time needed to obtain results and their accuracy. in this paper we focus on applying genetic algorithms in calculating...
-
Selection Pressure in the Evolutionary Path Planning Problem
PublicationThis article compares an impact of using various post-selection methods on the selection pressure and the quality of the solution for the problem of planning the path for a moving object using the evolutionary method. The concept of selection pressure and different methods of post-selection are presented. Article analyses behaviour of post-selection for four options of evolutionary algorithms. Based on the results achieved, waveform...
-
Virulence of Clinical Candida Isolates
PublicationThe factors enablingCandidaspp. infections are secretion of hydrolytic enzymes, adher-ence to surfaces, biofilm formation or morphological transition, and fitness attributes. The aim of thisstudy was to investigate the correlation between known extracellular virulence factors and survivalofGalleria mellonellalarvae infected with clinicalCandida. The 25 isolates were tested and the activityof proteinases among 24/24, phospholipases...
-
Parallelization of Selected Algorithms on Multi-core CPUs, a Cluster and in a Hybrid CPU+Xeon Phi Environment
PublicationIn the paper we present parallel implementations as well as execution times and speed-ups of three different algorithms run in various environments such as on a workstation with multi-core CPUs and a cluster. The parallel codes, implementing the master-slave model in C+MPI, differ in computation to communication ratios. The considered problems include: a genetic algorithm with various ratios of master processing time to communication...
-
A Universal Gains Selection Method for Speed Observers of Induction Machine
PublicationProperties of state observers depend on proper gains selection. Each method of state estimation may require the implementation of specific techniques of finding those gains. The aim of this study is to propose a universal method of automatic gains selection and perform its verification on an induction machine speed observer. The method utilizes a genetic algorithm with fitness function which is directly based on the impulse response...
-
Evolutionary Algorithms in MPLS network designing
PublicationMPLS technology become more and more popular especially in core networks giving great flexibility and compatibility with existing Internet protocols. There is a need to optimal design such networks and optimal bandwidth allocation. Linear Programming is not time efficient and does not solve nonlinear problems. Heuristic algorithms are believed to deal with these disadvantages and the most promising of them are Evolutionary Algorithms....
-
On evolutionary computing in multi-ship trajectory planning, Applied Intelligence
PublicationThe paper presents the updated version of Evolutionary Sets of Safe Ship Trajectories: a method which applies evolutionary algorithms and some of the assumptions of game theory to solving ship encounter situations. For given positions and motion parameters of the ships,the method finds a near optimal set of safe trajectories of all ships involved in an encounter. The method works in real time and the solutions must be returned...
-
A Parallel Genetic Algorithm for Creating Virtual Portraits of Historical Figures
PublicationIn this paper we present a genetic algorithm (GA) for creating hypothetical virtual portraits of historical figures and other individuals whose facial appearance is unknown. Our algorithm uses existing portraits of random people from specific historical period and social background to evolve a set of face images potentially resembling the person whose image is to be found. We then use portraits of the person's relatives to judge...
-
The Neural Knowledge DNA Based Smart Internet of Things
PublicationABSTRACT The Internet of Things (IoT) has gained significant attention from industry as well as academia during the past decade. Smartness, however, remains a substantial challenge for IoT applications. Recent advances in networked sensor technologies, computing, and machine learning have made it possible for building new smart IoT applications. In this paper, we propose a novel approach: the Neural Knowledge DNA based Smart Internet...
-
The novel sterilization device: the prototype testing
PublicationCurrently, there are numerous methods that can be used to neutralize pathogens (i.e., devices, tools, or protective clothing), but the sterilizing agent must be selected so that it does not damage or change the properties of the material to which it is applied. Dry sterilization with hydrogen peroxide gas (VHP) in combination with UV-C radiation is well described and effective method of sterilization. This paper presents the design,...
-
Gender approaches to evolutionary multi-objective optimization using pre-selection of criteria
PublicationA novel idea to perform evolutionary computations (ECs) for solving highly dimensional multi-objective optimization (MOO) problems is proposed. Following the general idea of evolution, it is proposed that information about gender is used to distinguish between various groups of objectives and identify the (aggregate) nature of optimality of individuals (solutions). This identification is drawn out of the fitness of individuals...
-
Use of Modified Cuckoo Search algorithm in the design process of integrated power systems for modern and energy self-sufficient farms
PublicationIn the face of increasingly stringent pollutant emission regulations, designing an agricultural holding becomes a difficult challenge of connecting a large number of coefficients that describe an energy system of a farm in regard to its ecological and economic efficiency. One way to cope with this issue is to design an energy self-sufficient farm that integrates various technologies, including renewable energy. However, the selection...
-
Reliability model of the crankshaft-piston assembly
PublicationThe laws that govern the durability of crankshaft-piston assembly friction nodes can be proved or at least derived or justified in an intuitive way. Operation of all the friction nodes is disturbed by external factors occurring with randomly changing intensity and also appearing at random. As the crankshaft-piston assembly friction nodes have a series structure and effects of those disturbances accumulate, their fitness for use...
-
Chromatographic separation, determination and identification of ecdysteroids: Focus on Maral root (Rhaponticum carthamoides, Leuzea carthamoides )
PublicationThe review presents general principles for choosing optimal conditions for ecdysteroid separation, identification, and isolation using HPLC/TLC techniques in RP, NP- HILIC or NP modes. Analytics of ecdyteroids pose a still insufficiently resolved problem. Plant-derived ecdysteroids are a point of interest of pharmaceutical industry and sport medicine due to their postulated adaptogenic and anabolic properties. In insects, ecdysteroids...
-
Multi-objective optimization of the cavitation generation unit structure of an advanced rotational hydrodynamic cavitation reactor
PublicationHydrodynamic cavitation (HC) has been widely considered a promising technique for industrial-scale process intensifications. The effectiveness of HC is determined by the performance of hydrodynamic cavitation reactors (HCRs). The advanced rotational HCRs (ARHCRs) proposed recently have shown superior performance in various applications, while the research on the structural optimization is still absent. The present study, for the...
-
Particle Swarm Optimization Based Optimal Design of Six-Phase Induction Motor for Electric Propulsion of Submarines
PublicationAbstract: Recent research reveals that multi-phase motors in electric propulsion systems are highly recommended due to their improved reliability and efficiency over traditional three phase motors. This research presented a comparison of optimal model design of a six phase squirrel cage induction motor (IM) for electric propulsion by using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). A six phase squirrel cage induction...
-
Segmentation Quality Refinement in Large-Scale Medical Image Dataset with Crowd-Sourced Annotations
PublicationDeployment of different techniques of deep learning including Convolutional Neural Networks (CNN) in image classification systems has accomplished outstanding results. However, the advantages and potential impact of such a system can be completely negated if it does not reach a target accuracy. To achieve high classification accuracy with low variance in medical image classification system, there is needed the large size of the...
-
Particle Swarm Optimization Based Optimal Design of Six-Phase Induction Motor for Electric Propulsion of Submarines
PublicationRecent research reveals that multi-phase motors in electric propulsion systems are highly recommended due to their improved reliability and efficiency over traditional three phase motors. This research presented a comparison of optimal model design of a six phase squirrel cage induction motor (IM) for electric propulsion by using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). A six phase squirrel cage induction...
-
Generalized regression neural network and fitness dependent optimization: Application to energy harvesting of centralized TEG systems
PublicationThe thermoelectric generator (TEG) system has attracted extensive attention because of its applications in centralized solar heat utilization and recoverable heat energy. The operating efficiency of the TEG system is highly affected by operating conditions. In a series-parallel structure, due to diverse temperature differences, the TEG modules show non-linear performance. Due to the non-uniform temperature distribution (NUTD) condition,...
-
Designing acoustic scattering elements using machine learning methods
PublicationIn the process of the design and correction of room acoustic properties, it is often necessary to select the appropriate type of acoustic treatment devices and make decisions regarding their size, geometry, and location of the devices inside the room under the treatment process. The goal of this doctoral dissertation is to develop and validate a mathematical model that allows predicting the effects of the application of the scattering...
-
Measurement Campaign and Mathematical Model Construction for the Ship Zodiak Magnetic Signature Reproduction
PublicationThe paper presents the partial work done within the framework of the EDA Siramis II project focused on magnetic signature reproduction of ships. Reproduction is understood here as the ability to determine the magnetic anomaly of the local Earth magnetic field in any direction and at any measurement depth due to the presence of the analysed object. The B-91 type hydrographic ship Zodiak was selected as the real case study. The work...
-
NEIGHBOURHOOD SPORT AS A TOOL OF URBAN REGENERATION - A WARSAW CASE STUDY
PublicationThere are many connections between sport and urban regeneration. They can be observed while organizing top-down projects, such as sporting mega-events. But sport and urban renewal can also be linked within bottom-up sport initiatives, ones that relate mostly to physical recreation or sport for all. The main goals of physical activity is caring for health, improving fitness, practicing hobbies, and achieving social integration....
-
The particle method for simulation of self-organization phenomena
PublicationThe aim of the work was to design, implement, and use, in a number of experiments, an abstract software environment (an artificial world)suitable for modelling systems consisting of many moving and interactingobjects distributed in space. The environment, named DigiHive, is directed towards modeling of complex systems manifested by processes of self-organization, self-reproduction and self modifications. The environment is mainly...