displaying 1000 best results Help
Search results for: THIN-FILM ANNEALING
-
Tribo-Environment Dependent Chemical Modification of Sliding Interfaces in Ultrananocrystalline Diamond Nanowall Film: A Correlation with Friction and Wear
PublicationTribological properties of ultrananocrystalline diamond nanowall (UNCD NW) films were investigated quantitatively in three different and controlled tribo-environmental conditions, proposing the passivation and graphitization mechanisms. However, these mechanisms are rather complicated and possibly can be understood in well-controlled tribological conditions. It was shown that the friction and wear of these films were high in highPage 1...
-
Chemical-Assisted Mechanical Lapping of Thin Boron-Doped Diamond Films: A Fast Route Toward High Electrochemical Performance for Sensing Devices
PublicationThere is an urgent need for an effective and economically viable increase in electrochemical performance of boron-doped diamond (BDD) electrodes that are used in sensing and electrocatalytic applications. Specifically, one must take into consideration the electrode heterogeneity due to nonhomogenous boron-dopant distribution and the removal of sp2 carbon impurities saturating the electrode, without interference in material integrity....
-
Marcin Kujawa dr hab. inż.
PeopleI have graduated from the Faculty of Civil Engineering, Gdańsk University of Technology (https://pg.edu.pl/en) in 1999. I received my M.Sc. degree in civil engineering structures with specialization in bridge structures. Next, in 2007, I received my doctoral degree in technical sciences under the supervision of professor Czesław Szymczak (Scopus Author ID: 6603993146) at the Faculty of Civil Engineering, Gdańsk University of Technology....
-
Electrolytic deposition of reactive element thin films on Crofer 22 APU and evaluation of the resulting high-temperature corrosion protection properties at 700 °C–900 °C
PublicationThis article presents electrolytic deposition of thin Rare Earth (RE) coatings on Crofer 22 APU stainless steel substrates for high temperature applications, such as interconnects in solid oxide cell stacks. The deposition of coatings based on yttrium-, gadolinium-, lanthanum-, and cerium nitrates is discussed. The high temperature corrosion properties of surface-modified steels were examined using thermogravimetry and electrical...
-
Nitrogen dioxide gas-sensing detection with GO modified CuO thin films
PublicationGas sensors have been continuously developed over the last few decades for several applications including air quality monitoring, automotive industry and recently for medical use. Gas sensors are usually based on metal oxides (MOXs), such as SnO2, TiO2, ZnO, WO3, CuO. Recently, new materials such as graphene oxide and heterostructures of graphene oxide and metal oxides are utilized for gassensing applications.
-
A Multi Rig Screening Test for Thin Ceramic Coatings in Bio - Tribological Applications
PublicationA method is presented for the comparative testing of wear resistance of ceramic coatings made from materials potentially feasible in tribo - medical applications, mainly orthopaedic implants made from ceramics coated metals for low cost, long life and low wear particle emission into the body. The method was devised as the main tool for use in research and is comprised of flat on flat and ball on flat surface (sliding) tests. Seven...
-
Magnetotransport Properties of Semi-Metallic Bismuth Thin Films for Flexible Sensor Applications
Publication -
Turbulent heat transfer in thin liquid films at low and high heat fluxes
PublicationW pracy przedstawiono rozważania turbulentnej wymiany ciepła w cienkich filmach cieczowych powstałych w wyniku uderzenia strugi przy małych i dużych strumieniach ciepła. W ostatnim przypadku może dojść do wrzenia filmu cieczowego. Oba zjawiska zamodelowano i uzyskano odpowiednie rozkłady temperatury i pedkosci.
-
Static analysis of grids assembled with thin-walled beams of the open cross-section
PublicationPraca dotyczny analizy statycznej rusztów zbudowanych z prętów cienkościennych. Przedstawiono w niej koncepcję metody modelowania konstrukcji dźwigarów cienkościennych i rusztów z wykorzystaniem superelementów w połączeniu z klasyczną teorią belek cienkościennych o przekroju nieodkształcalnym. Zamieszczono wyniki przeprowadzonej eksperymentalnej weryfikacji badań teoretycznych.
-
Magnetic anisotropy in the exchange-biased laser-patterned thin Co/CoO films
Publication -
Tuning of the Titanium Oxide Surface to Control Magnetic Properties of Thin Iron Films
Publication -
In situ optical studies of thermal stability of iodine-doped polyazomethine thin films
Publication -
Studies of Transport Properties of Single Layer Devices Based on the Polyazomethine Thin Films
Publication -
Phase diagram of P3HT:PC70BM thin films based on variable-temperature spectroscopic ellipsometry
Publication -
An Optical Low-Coherence System for 2-Dimensional Visualization of Thin Polymer Layers
PublicationW artykule omówiono zasadę działania i przedstawiono podstawowe właściwości systemu OCT (Optical Coherence Tomography). Na przykładzie folii polietylenowej przedyskutowano możliwości wykorzystania systemu do badanie wewnętrznej struktury warstwowej obiektów niebiologicznych. Przedstawiono i omówiono wyniki przeprowadzonych badań nad warstwowymi materiałami przeźroczystymi.
-
A Multi Rig Screening Test for Thin Ceramic Coatings in Bio-Tribological Applications
PublicationZaprezentowano metodę badań ogólnej charakterystyki tribologicznej cienkich powłok ceramicznych z wykorzystaniem równoległych testów na wielu stanowiskach o różnej konfiguracji styku powierzchni trących i przy ruchu o różnym charakterze (jednokierunkowym i posuwisto zwrotnym). Przedstawiono wyniki porównania przy pomocy jednoczesnej analizy wyników testów z różnych stanowisk; w wyniku testów uzyskano ranking powłok ze wskazaniem...
-
On electrical and photoconductive properties of mixed Nb2O5/TiO2 sol-gel thin films
PublicationPraca prezentuje wyniki przewodnictwa elektrycznego i fotoprzewodnictwa cienkich warstw TiO2 i Nb2O5/TiO2 otrzymanych metodą zol-żel. Pomiary przeprowadzono w funkcji temperatury i natężenia oświetlenia zarówno w próżni jak i w powietrzu. Struktura warstw została zbadana metodami XRD oraz AFM. W pracy zaobserwowano zaobserwowano spadek fotoprzewodnictwa wraz z zawartością Nb2O5
-
Thin-layer synthesized acrylamide copolymers modified with montmorillonite. Flocculation efficiency evaluation
Publication -
Superconducting properties of vn-sio 2 sol-gel derived thin films
Publicationin this work studies of structure and superconducting properties of vnsio2 films are reported. the films were obtained through thermal nitridation (ammonolysis) of solgel derived v2o3sio2 coatings (in a proper v2o3/sio2 ratio) at 1200 ◦c. this process leads to the formation of disordered structure with vn metallic grains dispersed in the insulating sio2 matrix. the structural transformations occurring in the lms as a result...
-
Selected problems of stability of thin-walled columns with bisymmetric open cross-section
PublicationPraca dotyczy problemów stateczności osiowo ściskanych prętów o bisymetrycznym przekroju otwartym. Badano wpływ nieliniowości materiału pręta oraz wstępnego zakrzywienia osi na wyboczenie skrętne oraz początkową ścieżkę pokrytyczną. Na przykładach numerycznych wykazano, że w pewnych przypadkach stateczny, symetryczny punkt może zmienić się na symetryczny ale niestateczny, co oznacza możliwość redukcji siły krytycznej.
-
Elastic distortional buckling of thin-walled bars of closed quadratic cross-section
PublicationIn this study a tin-walled bar with closed quadratic cross-section is considered. The elastic stability of axially compressed bar related to the cross-section distortion is investigated. The governing differential equatio is derived with aid of the principle of stationary potential energy. The critical load for simply supported bar is found in an analytical form and it is copared with the FEM solution. Sufficient accuracy of the...
-
Nitrogen-doped diamond thin films: potential application in Fabry-Pérot interferometer
PublicationIn this paper we present results of preliminary research of using nitrogen-doped diamond (NDD) films as reflective layer in Fabry-Pérot interferometer. NDD films were deposited on Si substrates by Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) with the use of CH4, H2 and N2 gas mixtures. During deposition process methane flow rate varied while nitrogen flow was constant. We performed series of measurements which showed...
-
On numerical analysis of a thin-walled I-beam with warping stiffenes undertorsional loads
PublicationPraca jest streszczeniem referatu wygłoszonego na międzynarodowej konferencji Metody Komputerowe w Mechanice, Wisła, 3-6 czerwca 2003. Przedstawiono problem numerycznej analizy belek cienkościennych ze stężeniami. Omówiono dwa modele jednowymiarowe: jeden bazujący na koncepcji skupionej sztywności bimomentowej, a drugi na zastosowaniu superelementu MES. Otrzymane wyniki porównano z rezultatami analizy MES przy zastosowaniu dyskretyzacji...
-
A review of stability problems of thin-walled structures developed at Gdańsk University of Technology
PublicationW pracy podano przegląd problemów stateczności konstrukcji cienkościennych, które były przedmiotem badań na Politechnice Gdańskiej. Przedstawiono bibliografię obejmującą 75 prace podzielone na trzy grupy tematyczne: stateczność prętów i łuków, pokrytyczne zachowanie się elemntów oraz optymalne projektowanie i analizę wrażliwości.
-
Sandwich-type architecture film based on WS2 and ultrafast self-expanded and reduced graphene oxide in a Li-ion battery
Publication -
Sandwich-type architecture film based on WS2 and ultrafast self-expanded and reduced graphene oxide in a Li-ion battery
Publication -
The assessment of microbiological antimicrobial properties of PE film loaded with nanozinc filler
Open Research DataThe dataset contains the results of a single series of determinations of the antimicrobial properties against E. coli and S. aureus of polyethylene films containing the nanozinc filler.
-
Quality increase for single-welded joints of thin-walled structures by means of simulation modelling
PublicationThe Simulation calculation module and the SolidWorks software package have helped to define the optimal shape and dimensions of single-welded joints which may serve the basis for calculating the process parameters of welding. Having compared the models with different weld cross-sections the authors have defined that the weld height and width do not significantly affect the stress concentration, and the stress concentration and...
-
Distortional buckling of composite thin-walled columns of a box-type cross section with diaphragms
PublicationDistortional buckling of axially compressed columns of box-like composite cross sections with andwithout internal diaphragms is investigated in the framework of one-dimensional theory. The channel membersare composed of unidirectional fibre-reinforced laminate. Two approaches to the member orthotropic materialare applied: homogenization based on the theory of mixture and periodicity cells, and homogenization basedon the Voigt–Reuss...
-
Test-supported numerical analysis for evaluation of the load capacity of thin-walled corrugated profiles
Publication -
ALD thin ZnO layer as an active medium in a fiber-optic Fabry–Perot interferometer
Publication -
Cuprous Oxide Thin Films Implanted with Chromium Ions - Optical and Physical Properties Studies
Publication -
SURFACE AND SPECTROSCOPIC PROPERTIES OF 1,8-DIAZAFLUOREN-9-ONE IN TITANIUM DIOXIDE THIN FILMS
Publication -
The Problems of Application of PVD/CVD Thin Hard Coatings for Heavy-Loaded Machine Components
Publication -
Second and third harmonic nonlinear optical process in spray pyrolysed Mg:ZnO thin films
Publication -
Enhancement of defects induced optical nonlinearity in Al: ZnO thin films by electron beam
Publication -
Deposition of thin titanium–copper films with antimicrobial effect by advanced magnetron sputtering methods
Publication -
ALD thin ZnO layer as an active medium in a fiber-optic Fabry-Perot interferometer
Publication.
-
Graphene oxide, reduced graphene oxide and composite thin films NO2 sensing properties
PublicationA graphene oxide (GO), reduced graphene oxide (RGO) and poly(3,4-ethylenedioxytiophene)- reduced graphene oxide (PEDOT-RGO composite) gas sensors were successfully fabricated using an electrodeposition method. The electrodeposition was carried out in aqueous GO dispersions. In order to obtain RGO and PEDOT-RGO, the electrochemical reduction of GO and PEDOT-GO was carried out in 0.1 M KCl at constant potential of −0.85 V. The GO, RGO...
-
Wear of Ultra-thin DLC or Tungsten-modified DLC Coatings under Reciprocating Sliding
PublicationIn the paper results are presented from tests in reciprocating sliding of self mated specimens of DLC and tungsten modified DLC coatings on stainless steel substrate. The contact geometry chosen for the research task was ball on flat. The contacts were lubricated either with distilled water or medical saline solution. Results are presented with regard to wear resistance as a function of material type and lubricant used.
-
Analysis of magnetic field distribution inside ferromagnetic thin shells during degaussing process
PublicationAnalysis of the demagnetization of a large ferromagnetic object like a ship, was conducted. The approximate mathematical model in the form of a long cylindrical shell of constant magnetic permeability was applied. The discrete degaussing winding was assumed and the current density and magnetic flux density distribution in the ferromagnetic shell wall were determined. Based on the frequential and temporal analysis the recommended...
-
Graphene oxide, reduced graphene oxide and composite thin films NO2 sensing properties
PublicationA graphene oxide (GO), reduced graphene oxide (RGO) and poly(3,4-ethylenedioxytiophene)-reduced graphene oxide (PEDOT-RGO composite) gas sensors were successfully fabricated using an electrodeposition method. The electrodeposition was carried out in aqueous GO dispersions. To obtain RGO and PEDOT-RGO, the electrochemical reduction of GO and PEDOT-GO was carried out in 0.1 M KCl at a constant potential of −0.85 V. The GO, RGO and PEDOT-RGO...
-
A simple and efficient hybrid discretization approach to alleviate membrane locking in isogeometric thin shells
PublicationThis work presents a new hybrid discretization approach to alleviate membrane locking in isogeometric finite element formulations for Kirchhoff–Love shells. The approach is simple, and requires no additional dofs and no static condensation. It does not increase the bandwidth of the tangent matrix and is effective for both linear and nonlinear problems. It combines isogeometric surface discretizations with classical Lagrange-based...
-
The microstructure effect on the electrical and optical properties of undoped and Sr-doped SmCoO3 thin films.
PublicationW pracy przedstawiono elektryczne i optyczne właściwości niedomieszkowanego i domieszkowanego Sr SmCoO3 cienkich filmów. Gęste i przezroczyste filmy o grubościach 80-100nm były przygotowane na szafirze metodą nanoszenia wirowego ciekłych polimerów. Filmy były syntezowane w temperaturach od 500 do 800C co umożliwiło otrzymanie różnych mikrostruktur. Elektryczne właściwości filmów były mierzone w funkcji temperatury. Domieszkowanie...
-
The effect of nonlinear restraint on torsional buckling and post-buckling behaviour of a thin-walled column
PublicationW pracy rozważa się wyboczenie skrętne i zachowanie pokrytyczne osiowo ściskanego swobodnie podpartego pręta cienkosciennego o przekroju otwartym ze sprężytą nieliniową podporą w środku rozpietości. Rozwiązanie problemu wyznaczono za pomocą metody małego parametru. W przykładzie numerycznym wyznaczono siłę krytyczną i ścieżkę początkowego zachowania pokrytycznego dwuteowego pręta z podporą sprężystą o charakterystyce składającej...
-
Application of the LPE-Grown LuAG: Ce Film/YAG Crystal Composite Thermoluminescence Detector for Distinguishing the Components of the Mixed Radiation Field
Publication -
Tomasz Mikulski dr hab. inż.
People -
Michał Sobaszek dr inż.
PeopleMichał Sobaszek was born in Gdansk in 1984. In the summer of 2009, he received a Master degree in Materials Engineering at Gdansk University of Technology. Currently, he is an Assistant Professor at the Faculty of Electronics at the Gdańsk University of Technology. In 2018 he was honoured with the scholarship for the outstanding young researches by the Minister of Science and Higher Education of Poland. For more than 7 years, he...
-
Marcin Perzanowski dr inż.
PeopleHello, I work in the Department of Magnatic Materials and Nanostructures in the Institute of Nuclear Physics Polish Academy of Sciences in Kraków, Poland. My current research is focused on: (1) exchange bias in multilayers and nanostructures, (2) supermagnetic effects in low-dimensional materials, (3) perpendicular magnetic anisotropy in thin films and nanostructures. Collaborations, comments, and suggestions are welcomed! If...
-
Czesław Kazimierz Szymczak prof. dr hab. inż.
People