Filters
total: 4126
-
Catalog
displaying 1000 best results Help
Search results for: SHIP POWER PLANTS
-
Predicting cutting power for band sawing process of pine and beech wood dried with the use of four different methods
PublicationWood drying is an important stage in the woodworking process. After drying, wood is subject to a re-sawing process, for which a high quality surface, low material loss, and high efficiency are often required. In this paper, forecasted values were presented of cutting power for the re-sawing process of pine and beech wood that were dried with four different methods. Forecasting of cutting power for an industrial band saw machine...
-
Energy-Efficient Joint User and Power Allocation in 5G Millimeter Wave Networks: A Genetic Algorithm-Based Approach
PublicationReducing power consumption is a pivotal challenge in 5G millimeter wave (mmWave) networks due to the density of the base stations (BSs) in these networks. In this paper, we focus on the joint user and power allocation problem in 5G mmWave networks, aiming to minimize power consumption while maintaining the user Quality of Service (QoS), considering the BSs switching on/off strategy. Initially, we formulate the problem as an Integer...
-
High-efficiency mini and micro heat exchangers for dispersed power generation
PublicationTaking into account the dispersed systems technologies and their development, the ORC systems seem to be promising technology amongst various micro-CHP domestic units (electrical power production below 10 kWe), however practical realization of the ORC cycle in a micro-scale is technically challenging. The system consists in devices such as the vapour generation unit (boiler), expansion device and heat exchangers. Each of them should...
-
The distributed model predictive controller for the nuclear power plant turbo-generator set
PublicationTypically there are two main control loops with PI controllers operating at each turbo-generator set. In this paper a distributed model predictive controller DMPC, with local QDMC controllers for the turbine generator, is proposed instead of a typical PI controllers. The local QDMC controllers utilize step-response models for the controlled system components. These models parameters are determined based on the proposed black-box...
-
Modeling of Electrified Transportation Systems Featuring Multiple Vehicles and Complex Power Supply Layout
PublicationThe paper proposes a novel approach to modeling electrified transportation systems. The proposed solution reflects the mechanical dynamics of vehicles as well as the distribution and losses of electric supply. Moreover, energy conversion losses between the mechanical and electrical subsystems and their bilateral influences are included. Such a complete model makes it possible to replicate, e.g., the impact of voltage drops on vehicle...
-
Power of the SMR brainwaves in the mental imagery experiment in sport: the "Successful Competition" scenario.
Open Research DataThe data were collected to perform research on the neural oscillation during mental imagery in sport. The study's main aim was to examine the cortical correlations of imagery depending on instructional modality (guided vs self-produced) using various sport-related scripts. The research was based on the EEG signals recorded during the session with the...
-
Power of the SMR brainwaves in the mental imagery experiment in sport: the "Fitness Activity" scenario.
Open Research DataThe data were collected to perform research on the neural oscillation during mental imagery in sport. The main aim of the study was to examine the cortical correlates of imagery depending on instructional modality (guided vs self-produced) using various sport-related scripts. The research was based on the EEG signals recorded during the session with...
-
Power of the SMR brainwaves in the mental imagery experiment in sport: the "Slow Start" scenario.
Open Research DataThe data were collected to perform research on the neural oscillation during mental imagery in sport. The main aim of the study was to examine the cortical correlates of imagery depending on instructional modality (guided vs self-produced) using various sport-related scripts. The research was based on the EEG signals recorded during the session with...
-
Power of the SMR brainwaves in the mental imagery experiment in sport: the "Training Session" scenario.
Open Research DataThe data were collected to perform research on the neural oscillation during mental imagery in sport. The study's main aim was to examine the cortical correlations of imagery depending on instructional modality (guided vs self-produced) using various sport-related scripts. The research was based on the EEG signals recorded during the session with the...
-
Analysis of inductive power transfer systems for variable air gap and voltage supply frequency
PublicationThe paper describes an IPT system, by which electrical energy may be transmitted through a large air gap between coils without electrical connection. It presents theoretical and simulation analysis of IPT, which allows for supplying a receiver in the conditions of slow, in relation to the dynamics of power supply, changes in dimension of the air gap. The influence of frequency characteristics of the system on the possible selection...
-
Double-stage ORC system based on various temperature waste heat sources of the negative CO2 power plant
PublicationAnalysed is the modification of the thermodynamic cycle with the negative CO2 power plant concept by its combination with the organic Rankine cycle. The analysed power plant operates on a gas produced from the gasification of sewage sludge. The negative emission term comes from the aggregated CO2 balance resulting from the capture of the CO2, while the sewage sludge is one of the inevitable environmental sources of CO2 to be avoided....
-
Validated HPTLC method for determination of ledol and alloaromadendrene in the essential oil fractions of Rhododendron tomentosum plants and in vitro cultures and bioautography for their activity screening
PublicationRhododendron tomentosum (Ledum palustre) is a bog shrub used in traditional medicine for treatment of respiratory and rheumatic diseases. Due to the large variability of the chemical composition of its essential oil, depending on the habitat, the in vitro cultures were established as the alternative source of the volatile fraction. There is a need to monitor a quality of the field grown as well as in vitro plant material, especially...
-
Small hydro-power in the European Union
PublicationW pracy przedstawiono informacje na temat udziału energii odnawialnej w produkcji energii w świecie oraz udziału odnawialnych źródeł energii (OZE) w 25 krajach Unii Europejskiej w roku 1997 i przewidywany udział w roku 2010. Omówiono historię rozwoju małych elektrowni wodnych (MEW) w Unii Europejskiej i dokonano ogólnego przeglądu MEW w krajach UE i w pozostałych krajach Europy. Przedstawiono możliwy rozwój małej energetyki wodnej...
-
The laboratory model of wind power generator
Publication -
Pumped-storage power plant Żarnowiec.
PublicationPrzedstawiono historię budowy, główne zadania i parametry techniczne elektrowni szczytowo-pompowej w Żarnowcu
-
Neural simulator of steam power unit.
PublicationZbadano możliwości zbudowania neuronowego symulatora turbinowego bloku energetycznego. Zamodelowano ten obieg i sprawdzono konfiguracje sztucznych sieci neuronowych (SSN) zapewniające dużą dokładność symulatora neuronowego. Zwrócono uwagę na problemy dotyczące węzłów siłowni, w których następuje mieszanie się strumieni czynnika o zróżnicowanych parametrach cieplno-przepływowych. Wskazano na zastosowanie takiego symulatora w diagnostyce.
-
Hydraulic power plant on the Radunia River
Publicationprzedstawiono rys historyczny, paramerty techniczne i walory turystyczne elektorwni wodnych.
-
Low voltage photovoltaic power system
PublicationThe use of photovoltaics is growing rapidly in the industry as well as households. Therefore, educating the public will help them understand solar cell technology, which is becoming more common in everyday life. This paper proposes a demonstrational set-up of photovoltaic panel for the purpose of science education. It was used in numerous outreach activities such as science fairs. Moreover, it proved to be a great tool for education...
-
Optimizing CO2 Purification in a Negative CO2 Emission Power Plant
PublicationIn the pursuit of mitigating CO2 emissions, this study investigates the optimisation of CO2 purification within a Negative CO2 Emission Power Plant using a spray ejector condenser (SEC) coupled with a separator. The approach involves direct-contact condensation of vapour, primarily composed of an inert gas (CO2), facilitated by a subcooled liquid spray. A comprehensive analysis is presented, employing a numerical model to simulate...
-
Development of an emulation platform for synchronous machine power generation system using a nonlinear functional level model
PublicationThe article presents the Power Hardware in the Loop (PHIL) approach for an autonomous power system analysis based on the synchronous generator model incorporating magnetic saturation effects. The model was prepared in the MATLAB/Simulink environment and then compiled into the C language for the PHIL platform implementation. The 150 kVA bidirectional DC/AC commercial-grade converter was used to emulate the synchronous generator....
-
Activated Tungsten Inert Gas Weld Characteristics of P91 Joint for Advanced Ultra Supercritical Power Plant Applications
PublicationActivated Tungsten Inert Gas (A-TIG) welding, a variant of tungsten inert gas (TIG) welding, was used for welding P91. In Generation IV power plants, P91 welds are prone to premature failure due to the presence and formation of brittle phases and creep at high temperatures. When performing A-TIG welding, the flux composition plays a role in the reversal of the Marangoni flow in the weld pool, which ultimately determines the level...
-
Millimeter Wave Wideband and Low-Loss Compact Power Divider Based on Gap Waveguide: For Use in Wideband Antenna Array System
PublicationThis paper presents a wideband and low-loss design of a compact power divider based on gap waveguide technology. The proposed power divider consists of two adjacent E-plane groove gap waveguide and a small ridge section to couple and equally divide the EM energy from the input E-plane groove gap waveguide to the two output ones in-phase. The simulation results show that the proposed waveguide power divider has about 40% impedance...
-
Manufacturing and Recycling Impact on Environmental Life Cycle Assessment of Innovative Wind Power Plant Part 2/2
PublicationThe process of conversion of wind kinetic energy into electricity in innovative wind power plant emits practically no harmful substances into the environment. However, the production stage of its components requires a lot of energy and materials. The biggest problem during production plan-ning process of an innovative wind power plant is selection of materials and technologies and, consequently, the waste generated at this stage....
-
Voltage and Current Unbalance Reduction in Power Networks with Distributed Generation and Electric Vehicles
PublicationThe current development of prosumer microsources and the expected spread of electric vehicles may cause the appearance of significant current and voltage unbalance in low-voltage (LV) networks. This unbalance, which is an unfavorable phenomenon, may occur when using single-phase photovoltaic (PV) microsources and single-phase home chargers for electric vehicles. This paper presents a proposal for the symmetrization of the LV network...
-
Szkolenie w ramach POWER 3.4
EventsTworzenie zasobów edukacyjnych – prowadzenie zajęć na uczelnianej platformie eNauczanie
-
Anchoring and mooring equipment for a two-segment inland waterways ship
PublicationW artykule dokonano przeglądu i analizy wyposażenia kotwiczno-cumowniczego współczesnych statków śródlądowych. Przedstawiono także propozycję takiego wyposażenia dla segmentowego statku pasażerskiego wraz z doborem i rozmieszczeniem na pokładzie poszczególnych urządzeń.
-
FEM strength analysis of sandwich panels for ship structure applications
PublicationW publikacji zaprezentowano wyniki analizy numerycznej stalowego panelu sandwich obciążonego siłami ściskającymi wzdłuż laserowo spawanych usztywnień. Przedstawiono sposób modelowania, pokazano i przedyskutowano uzyskane rezultaty.
-
Ship Collision Risk Assessment Based on Collision Detection Algorithm
Publication -
Towards probabilistic models for the prediction of a ship performance in dynamic ice
Publication -
Assessment of a critical area for a give-way ship in a collision encounter
Publication -
Assessing Grounding Frequency using Ship Traffic and Waterway Complexity
Publication -
A risk-informed ship collision alert system: Framework and application
Publication -
Optimization Model to Manage Ship Fuel Consumption and Navigation Time
Publication -
Selected developments within ship safety equipment for saving lives
PublicationW artykule przedstawiono aktualny rozwój nowych metod i urządzeń do bezpiecznej ewakuacji ludzi ze statków, zwłaszcza z dużych pasażerskich, zabierających na pokład łącznie do 5 tysięcy osób.
-
Hybrid system of safe ship steering in a collision situation at sea
Publication...
-
On application of the Case-Based Reasoning methods in ship automation design
PublicationW artykule przedstawiono metodę wnioskowania na podstawie przypadków oraz dwa przykłady jej zastosowania w projektowaniu statków. Pierwszy przykład dotyczy systemu projektowania koncepcyjnego statku. Drugi przykład odnosi się do projektowania układów automatyki okrętowej. Omówiono szczegółowo problemy doboru funkcji podobieństwa w metodzie wnioskowania na podstawie przypadków.
-
A risk-based method for ship safety assessment at the preliminary designstage
PublicationPraca zawiera wyniki badań dotyczących opracowania metody do analizy bezpieczeństwa statku w warunkach krytycznych. Metoda oparta jest na podejściu systemowym do oceny bezpieczeństwa, formalnej ocenie bezpieczeństwa FSA i hydromechanice okrętu. Podano przykłady oceny ryzyka utraty statku w warunkach krytycznych.
-
A direct method for risk assessment when ship is in critical conditions
PublicationPrzedstawiono metodę oceny bezpieczeństwa statku w warunkach krytycznych. Zdefiniowano warunki krytyczne. Podano praktyczne sposoby oceny ryzyka przetrwania statku w warunkach krytycznych. Opisano bezpośrednią metodę oceny ryzyka w warunkach krytycznych. Podano przykłady oceny ryzyka.
-
Combining of global and local stresses in ship hulls on ocean waves.
PublicationOpisano zagadnienia superpozycji naprężeń dynamicznych od zginania ogólnego i strefowego, we wzdłużnych wiązarach kadłuba statku. Krytycznie skomentowano wymagania przepisów klasyfikacji i budowy statków, dotyczące oceny wytrzymałości tych elementów konstrukcji. Przedstawiono sposób wykonywania prognozy długoterminowej naprężeń w tych elementach i zaproponowano sposób sumowania charakterystycznych wartości naprężeń od zginania...
-
Gas turbine as ship prime mover - specific problems and prospects.
PublicationPrzedstawiono ewentualne możliwości zastosowania turbin gazowych w okrętownictwie. Analizowano aspekty ekologiczne, ekonomiczne i techniczne.
-
Hydrogen degradation of 26H2MF and 34HNM steels used in ship engines.
PublicationPrzedstawiono wyniki badań podatności stali 26H2MF i 34HNM na niszczenie wodorowe, uzyskane po badaniach w roztworze kwasu siarkowego przy równoczesnej polaryzacji katodowej. Wykazano, że skład i obróbka cieplna stali mają wpływ na ich podatność. Efejkt ten przypisano różnej zdolności pułapkowania wodoru przez stale.
-
Numerical algorithms of planning safe ship trajectories for ARPA systems
PublicationTeza rozprawy: ''Połączenie odpowiedniej miary ryzyka kolizji obiektów i metody unikania kolizji za pomocą manewru niezbędnego pozwala na opracowanie szybkiej, efektywnej i prostej w implementacji metody planowania bezpiecznych trajektorii statków dla systemów ARPA, uwzględniającej dowolną zadaną domenę obiektu. Dobór kształtu domeny obiektu ma znaczny wpływ na zgodność wynikowej trajektorii z regułami MPDM. Minimalizacja liczby...
-
The crucial contemporary problems of the computational methods for ship propulsor hydrodynamics
PublicationPraca przedstawia krytyczny przegląd współczesnych metod obliczeniowych stosowanych do projektowania i analizy pracy pędników okretowych. Omówiono modele linii nośnej i powierzchni nośnej, a także metody elementów brzegowych i metody RANSE oraz LES. Przedstawiono przykładowe wyniki obliczeń oraz oceniono i porównano dokładność opisywanych metod.
-
Numerical Algorithms of Planning Safe Ship Trajectories for ARPA Systems
PublicationGłównym celem pracy było zaprojektowanie metody znajdowania bezpiecznych trajektorii statków, która byłaby prosta w implementacji, szybka (niska złożoność obliczeniowa)i deterministyczna, elastyczna (umożliwiałaby zastosowanie dowolnej domeny). Aby zrealizować cel należało zbadać bieżący stan wiedzy w dziedzinie,zaprojektować nową metodę, zaimplementować metodę (wraz ze wszystkimi niezbędnymi algorytmami) w środowisku programistycznym...
-
A Complete Design of Ship Propellers Using the New Computer System
PublicationArtykuł przedstawia nowy system komputerowy do projektowania śrub okrętowych. Obliczenia oparte są na teorii linii nośnej i teorii powierzchni nośnej. System umożliwia wielokryterialną optymalizację projektu z punktu widzenia sprawności napędowej, własności kawitacyjnych, wytrzymałości skrzydeł oraz poziomu generowanych wymuszeń niestacjonarnych.
-
Description of the hydrodynamic pressure field function around the ship hull
PublicationW artykule przedstawiono metodę aproksymacji pola hydrodynamicznego okrętu, wykorzystując pole obliczone metodą elementów skończonych. Punkty kontrolne umieszczono w środku paneli rozmieszczonych na kadłubie statku, na powierzchni dna morskiego oraz na powierzchni swobodnej; w p-ktach tych znajdują się osobliwości w postaci źródeł, upustów i/lub dipoli. Przedstawione wyniki obliczeń zostały uzyskane przy użyciu tych pierwszych...
-
Compressive Sensing Approach to Harmonics Detection in the Ship Electrical Network
PublicationThe contribution of this paper is to show the opportunities for using the compressive sensing (CS) technique for detecting harmonics in a frequency sparse signal. The signal in a ship’s electrical network, polluted by harmonic distortions, can be modeled as a superposition of a small number of sinusoids and the discrete Fourier transform (DFT) basis forms its sparse domain. According to the theory of CS, a signal may be reconstructed...
-
Improved maximum power point tracking algorithms by using numerical analysis techniques for photovoltaic systems
PublicationSolar photovoltaic (PV) panels generate optimal electricity when operating at the maximum power point (MPP). This study introduces a novel MPP tracking algorithm that leverages the numerical prowess of the predictor-corrector method, tailored to accommodate voltage and current fluctuations in PV panels resulting from variable environmental factors like solar irradiation and temperature. This paper delves into the intricate dynamics...
-
Voltage and frequency regulation of a standalone induction generator by reduced-rating power electronic compensators - comparative evaluation
PublicationIn this paper are considered two fundamental topologies of power electronic compensators for voltage and frequency control of a standalone self-excited induction generator (IG) system. These are voltage and current source inverter based shunt compensators with energy storage. The aim of this study is to assess main features of both topologies in dynamic and steady-state IG operation. The whole system is modelled with the aid of...
-
Numerical investigations of the engine cooling system in a small power vesel pod propulsion system
PublicationThe development of electronics and electrotechnology enabled to put electric motors of the alternating current in the pod and to use them for the main drive of ships. A lot of heat which must be picked up from the system is a problem which is turning up at applying the system of this type. Many big ships lately contended with these problems. Building the small propeller for the boat powered with solar power we decided to check...