Search
Filters
total: 1507
displaying 1000 best results Help
Search results for: FLOATING MARINE PLANTS
-
Integrated safety and security analysis of hazardous plants and systems of critical infrastructure
PublicationThis article addresses an integrated safety and security analysis approach of hazardous industrial plants and systems of critical infrastructure. Nowadays due to new hazards that emerge there are opinions among experts that these issues require an integrated approach in life cycle, from the design concept, through the design and operation of the plant, to its decommissioning. It is proposed to start from an interesting methodology...
-
APPLICATION OF THE KOSECKI’S METHOD IN DESIGNING OF OFFSHORE WIND POWER PLANTS FOUNDATION
PublicationThe concept of offshore wind power plants has been well developed in many European countries. There is no such thing as design of offshore wind power plants according to national tradition. The main problem is the lack of standards and guidelines. Ones being applied are Scandinavian or American methods which are not fully adapted to the conditions of the Baltic Sea. The article focuses on the monopile design, as it is currently the...
-
Market Price Prediction of Property Rights from Gas Fired Plants or Plants with Total Installed CHP Source Capacity Below 1 MW until 2025
PublicationThe resolution on the Polish Energy Policy until 2030 (PEP-30) was adopted by the Council of Ministers on 10 November 2009. The document specifies the combined electricity and heat generation as a direction of pursuing the goals of energy efficiency, fuel and energy supply security, competitive fuel and energy markets development, and reduction of the energy sector’s environmental impact. PEP-30 assumes that electricity generation...
-
Measurement techniques for assessing the olfactory impact of municipal sewage treatment plants
PublicationThe study presents information about the measurement techniques used for the assessment of air quality in terms of the olfactory intensity resulting from the operation of municipal sewage treatment plants. Advantages and disadvantages of the measurement techniques used are presented. Sources of malodourous substance emission from sewage treatment plants were described, and the malodourous substances emitted were characterised....
-
Web-based GIS as a tool for supporting marine research
PublicationZbieranie danych morskich podczas badań hydroakustycznych jest złożonym zadaniem, na które składają się nie tylko pomiary, ale także analiza, weryfikacja i interpretacja informacji uzyskanych przez różne czujniki. Automatyczna integracja, wizualizacja i przetwarzanie zgromadzonych danych pozwala na bardziej precyzyjne rozpoznanie badanych zjawisk. W pracy przedstawiono dedykowany sieciowy system syntezy i rozpowszechniania danych...
-
Constituents of organic alkalinity in pore water of marine sediments
Publication -
Small Hydropower Plants in Pomerania: The Example of Evolution of Modern Industrial Brick Architecture
PublicationModernism is usually recognized and associated with the aesthetics of the International Style, represented by white-plastered, horizontally articulated architecture with skimpy decoration, where function was the main imperative of the architects’ ambitions. The brick face of Modernism in Northern Europe reflected, in fact, the complexity of the modern change, breaking ties with the historic styles of the 19th century and being...
-
Advances in mass spectrometry for iron speciation in plants
PublicationIron is an important nutrient essential for plants and critical for human health. The state-of-the art of methods for iron speciation in cereal grains and plant fluids is critically reviewed. Particular attention is given to the latest developments in the coupling of HPLC with the parallel ICP MS and electrospray ionization (ESI) MS/MS detection, usually QTOF MS or Q-Orbitrap MS, for the identification and quantification of iron...
-
Marine Technology Transactions. Technika Morska
Journals -
Regeneration of marine engine valves using laser surfacing
PublicationThis article presents an analysis of the applicability of laser surfacing of the exhaust valve face of a marine diesel engine using cobalt-based powder. After preparation by machining, the selected valves were subjected to laser surfacing using a high-power ROFIN DL020 laser. The EuTroLoy 16012 powder was used in the surfacing process. One of the valves was cut and subjected to metallographic examination and hardness measurements,...
-
The thermal effort during marine steam turbine flooding with water
PublicationThe work discussed an extreme case of cooling a steam turbine. The ship's steam turbine was used as an example. In marine transport units with low-speed engines dominate, however, there are also units with steam turbines. An example of analysed marine steam turbine is shown in Fig. 1. When considering the issue of cooling steam turbines, it is necessary to estimate the extreme conditions that may occur during operation of the turbine....
-
Thermodynamic Cycles of Air Microturbine Power Plants Working on Biomass Fuels
PublicationThe gas turbine engine is modified to work as an air turbine set which consists, in the simplest arrangement, of a compressor, a heat exchanger and a turbine. Air is a working medium for both: the compressor and the turbine. This kind of air turbine set can be applied in power plants working on biomass fuels. In this solution we can burn fuels of varying parameters in the external combustion chamber without any harmful effects...
-
The importance and availability of marine certified reference materials
PublicationTraceability and reliable results are the two pillars of analytical methods; certified reference materials (CRMs) meet this requirement. ISO 17034:2016 credentials provide brief information on general requirements for the competence of Reference Material Producers (RMPs). The different types of CRMs have been produced in recent years for chemical analysis in food, water, soil, and sediment matrices in recent years. This review...
-
Analysis of the macrostructure of the fuel spray atomized with marine engine injector
PublicationOne of the main problem influencing the combustion process in the cylinder of the marine engine is an fuel spray phenomena. The parameters describing the shape of the fuel spray are named macro parameters. This article presents the research results of the macrostructure parameters of the fuel spray atomized with the marine engine injector. The research were carried out by optical visualization measurement method of Mie scattering....
-
Research on the effect of low-sulphur marine fuels on the dynamic characteristics of a CI engine
PublicationThe implementation of low-sulphur, so-called modified marine fuels into operation requires prior labora- tory engine tests to assess the energy, emission and structural effects of their usage. This type of research are carried out on the test bed of a diesel engine as a small-scale physical model that reproduces the adequate design and process (parametric) features of a full-size marine engine. Their key stage is to determine the energy...
-
Multibeam Sonar Characterisation of Seafloor in the Context of Visualisation and Dissemination of Marine Data
PublicationThe paper presents the seafloor characterisation method based on multibeam sonar data. it relies on using three types of multibeam seafloor sensing data: 1) the grey-level sonar images (echograms) of seabed, 2) the 3D model of the seabed surface which consists of high resolution bathymetric data, 3) the set of time domain bottom echo envelopes received in the consecutive sonar beams. The classification is performed by utilisation...
-
Improving depth maps of plants by using a set of five cameras
PublicationObtaining high-quality depth maps and disparity maps with the use of a stereo camera is a challenging task for some kinds of objects. The quality of these maps can be improved by taking advantage of a larger number of cameras. The research on the usage of a set of five cameras to obtain disparity maps is presented. The set consists of a central camera and four side cameras. An algorithm for making disparity maps called multiple...
-
Cognitive engineering and functional safety technology for reducing risks in hazardous plants
PublicationCognitive engineering is considered nowadays as interesting multidisciplinary domain that focuses on improving the relations between humans and the systems that are supervised and operated. The industrial automation and control systems (IACS) in hazardous plants are increasingly computerized and perform various safety functions. These are designed and implemented according to the functional safety concept. The objective is to maintain...
-
Energy neutrality versus carbon footprint minimization in municipal wastewater treatment plants
PublicationThis work aimed to compare the carbon footprint (CF) of six full-scale wastewater treatment plants (WWTPs). The CF was estimated in the range of 23–100 kg CO2e per population equivalent. In the total CF, the direct emissions held the highest share (62–74%) for the plants with energy recovery from biogas. In the plants depending entirely on the power grid, the indirect emissions due to energy consumption dominated the total CF (69–72%)....
-
Selected problems concerning strength of a floating dock with roof
PublicationW pracy przedstawiono modele i wyniki analizy wytrzymałości konstrukcji zadaszonego doku pływającego. Obliczono, że ścianki wiązarów zadaszenia, aby mogły przenieść obciążenia środowiskowe, muszą mieć grubość 24 mm. Ciężkie przesuwne segmenty zadaszenia generują w dennikach pontonu doku naprężenia sięgające 25% wartości dopuszczalnych. Wytężenie konstrukcji pontonu doku i podbudowy, obciążonych ciężarem zadaszenia i dokowanego...
-
Hydrodynamical loads on a floating dock towed in sea conditions
PublicationPrzedstawiono i analizowano charakterystyki amplitudowe (RAO) oraz prognozy krótko i długoterminowe hydrodynamicznych reakcji doku pływającego holowanego w warunkach morskich na akwenach Bałtyku i Morza Północnego. Przedmiotem badań były: nurzania i kołysania wzdłużne, ciśnienia dynamiczne indukowane w różnych częściach dna doku, pionowy moment gnący i opór doku holowanego na falach czołowych. Charakterystyki RAO rozpatrywanych...
-
Heave Plates with Holes for Floating Offshore Wind Turbines
PublicationThe paper presents an innovative solution which is heave plates with holes. The long-known heave plates are designed to damp the heave motion of platforms. They are most often used for Spar platforms. The growing interest in this type of platform as supporting structures for offshore wind turbines makes it necessary to look for new solutions. Based on the available literature and the authors’ own research, it was concluded that...
-
ENERGY AND EMISSION QUALITY RANKING OF NEWLY PRODUCED LOW-SULPHUR MARINE FUEL
PublicationThe article describes the methodology of engine tests on new types of low-sulphur marine fuels in laboratory conditions in order to conduct a comprehensive assessment of their suitability for powering full-size marine engines. The innovativeness of the proposed solution consists of adapting the laboratory Diesel Engine Test Bed to carry out experimental tests using residual and alternative fuels so that it is possible to imitate...
-
Alternative and new plants
Publication -
The sources of contamination and reasons of damage of the flow part of the marine turbine engine in operation
PublicationThe aim of this paperis to show particular sensitivity of the flow part of the marine turbine engine to the presence of contaminations in the intake air. The contaminations form hard-to-remove deposits in the intervene channels that result in a reduced efficiency and performance of the engine. The paper classifies the contaminants according the source of their formation and their destructive force. The performed analyses and syntheses...
-
Marine Fuel Sulphur Limit Impact on Air Pollution
PublicationThe article presents calculation of Sulphur oxides percentage drop rate in marine industry recorded after 01.01.2020 when new limits, provided by International Maritime Organizations legislation, became effective. Ships’ SOx global emission was estimated and compared between 4th quarter 2019 and 1st quarter 2020. For more accurate estimation 3 seaside cities with big harbors were selected for statistical analysis. Noticeable...
-
Enhancement of lift and drag performances of a NACA0012 airfoil by multi-DBD plasma actuator with additional floating interelectrodes
PublicationIt is clear that the improvement of aircraft aerodynamic performances is currently and will continue to be a significant area of research for the aeronautical industry. The current study is focused on theenhancement of aerodynamic airfoil performances by using a multi-DBD plasma actuator mounted around the model leading-edge. Experiments have been conducted at the University of Orleans, in the 2 m x 2 m test section of a large...
-
Application of deep eutectic solvents for separation and determination of bioactive compounds in medicinal plants
PublicationThe medicinal plants industry, particularly in regard to products rich in biologically active substances for maintaining health, has grown by leaps and bounds in the last decade, with sales of over-the-counter drugs containing these substances growing by billions of dollars. Attention has thus also been paid to the safety and effectiveness of these medicines. We are currently witnessing a rapid increase in the number of publications...
-
TEST METHOD FOR DETERMINING THE CHEMICAL EMISSIONS OF A MARINE DIESEL ENGINE EXHAUST IN OPERATION
PublicationThe article briefly describes the problem of air pollution caused by sea-going ships and the resulting restrictions on the emission of toxic and harmful chemical compounds in the exhaust of marine engines, introduced by the International Maritime Organization (IMO) under the International Convention for the Prevention of Sea Pollution from Ships (MARPOL 73/78). Such emissions provide a significant metrological problem, not only...
-
A new model of fuel spray shape at early stage of injection in a marine Diesel engine
PublicationIn the cylinders of a marine diesel engine, self-ignition occurs in very shortly time after the fuel injection into the combustion chamber. Therefore, the paper present was to develop a model of diesel fuel spray for the early stage of fuel spray for in marine diesel engine. There were taken into consideration the main aspects technical such as nozzle diameter of marine engine injector and backpressure in combustion chamber. In...
-
Journal of Medicinal Plants
Journals -
Propagation of Ornamental Plants
Journals -
Plants People Planet
Journals -
Survey on fuzzy logic methods in control systems of electromechanical plants
PublicationРассмотрены алгоритмы управления электромеханическими системами с использованием теории нечеткой логики, приводятся основные положения их синтеза, рассматриваются методы анализа их устойчивости на основе нечетких функций Ляпунова. Эти алгоритмы чаще всего реализуются в виде различных регуляторов, применение которых целесообразно в системах, математическая модель которых не известна, не детерминирована или является строго нелинейной,...
-
Trophic Transfer of Mercury in a Temperate Marine Food Web, Southern Baltic Sea
PublicationMercury (Hg) is considered to be one of the most dangerous global environmental pollutants. The toxicity and bioavailabilityof Hg depend on its chemical form, and the greatest hazard is posed by the organomercurial compounds. Hg is introduced into the human body primarily through the consumption of fish and seafood. Despite numerous studies on Hg in marine organisms, there is still a gap in the knowledge on Hg uptake and...
-
Marine and Cosmic Inspirations for AI Algorithms
PublicationArtificial Intelligence (AI) is a scientific area that currently sees an enormous growth. Various new algorithms and methods are developed and many of them meets practical, successful applications. Authors of new algorithms draw different inspirations. Probably the most common one is the nature. For example, Artificial Neural Networks were inspired by the structure of human brain and nervous system while the classic Genetic Algorithm...
-
Investigation of ecological parameters of a gas turbine combustion chamber with steam injection for the floating production, storage, and offloading vessel
PublicationThe article is dedicated to the investigation of the possibility of using the contact type gas turbine cycle with steam injection into the combustion chamber for the floating production, storage, and offloading vessel in order to increase the specific power and efficiency and reduce emissions of toxic components. A new approach is proposed, associated with the use of the two-stage injection of superheated steam into a gas turbine...
-
Failure analysis of the exhaust valve face in diesel marine engine
PublicationThe exhaust valve from marine diesel engine which was damaged after 2000 hours of service was investigated. In order to prolong the service time the valve face was cladded with cobalt base alloy using laser technique. After failure microstructural and chemical analyses reviled that cladding process was conducted improperly. The chemical composition of the clad layer was far from the designed one and what more completely inhomogeneous....
-
Video of LEGO bricks on conveyor belt - minifigures, animals, plants and accessories
Open Research DataThe set contains videos of LEGO bricks (minifigures, animals, plants and accessories) moving on a white conveyor belt. The images were prepared for training neural network for recognition of LEGO bricks. The bricks were separated as much as possible and in most cases they should not overlap. The images were taken from different sides by stationary camera...
-
Algorithms for passive detection of moving vessels in marine environment
Publication -
EXHAUST TEMPERATURE MEASUREMENTS OF THE MARINE TURBOCHARGED DIESEL ENGINES IN OPERATION
PublicationThe article presents the selected metrology issues concerning the exhaust temperature of the turbocharged marine engines during operation. The special concern has been paid on existing disturbances as well as thermodynamical interpretation of the recorded measurement signal. A diagnostic informativeness of the standard exhaust temperature’s measurements has worked out while the engine runs in steady states has been also considered...
-
Phosphorus and nitrogen forms in liquid fraction of digestates from agricultural biogas plants
PublicationThe novelty of the presented research is the determination of the nitrogen and phosphorus fraction in the liquid fraction of digestate from agricultural biogas plants. This information is important because it can help in proposing possible further liquid fraction management or developing of new technologies for their purification. The research covered digestates from agricultural biogas plants, obtained from the fermentation of...
-
Possibilities of heat transfer augmentation in heat exchangers with minichannels for marine applications
PublicationIn the paper, new trends in development of microchannel heat exchangers are presented. The exchangers developed in this way can be applied in marine applications. Main attention was focused on heat exchangers design with reduced size of passages namely based on microchannels. In our opinion future development of high power heat exchangers will be based on networks micro heat exchangers.
-
Journal of Marine Science and Engineering
Journals -
MARINE STRUCTURES
Journals -
MARINE GEODESY
Journals -
Present state of sewage and wastewater treatment plants in the polish coast of Baltic Sea
PublicationIn the paper the state of art of wastewater management in four zones of Polish Baltic Sea coast: the Vistula Lagoon, the Bay of Gdansk and Bay of Puck, the open sea zone and the Szczecin Lagoon, is discussed. Hydrological characteristics of these four zones as well as characteristics and operation effectiveness of wastewater treatment plants (WWTPs) located there, are presented.
-
Speciation of heavy metal compounds in samples of biota from marine ecosystems
PublicationIt has become increasingly evident that the toxicity, mobility, bioavailability and bioaccumulation of metals are dependent on the particular physico-chemical form in which the element occurs in the environment. Special attention is paid to metals, which are essential for the proper functioning of organisms if present in appropriate amounts but are toxic if in excess (i.e. Se, Cr, Zn), and also to non-essential elements (i.e. Hg,...
-
Towards systemic functional safety and security management in hazardous plants
PublicationThe aim of this article is to identify and discuss some issues related to functional safety and security management in hazardous industrial plants. The safety functions are to be realised using the electric / electronic / programmable electronic systems (E/E/PESs) or the safety instrumented systems (SISs) that are designed and operated respectively according to IEC 61508 and IEC 61511 requirements in life cycle. Although the role...
-
Accuracy of marine gravimetric measurements in terms of geodetic coordinates of land reference benchmark
PublicationThe article presents how the values of (3D) coordinates of land reference points affect the results of gravimetric measurements made from the ship in sea areas. These measurements are the basis for 3D maritime inertial navigation, improving ships' operational safety. The campaign verifying the network absolute point coordinates used as a reference point for relative marine gravity measurements was described. The obtained values...