Search
Filters
total: 2134
displaying 1000 best results Help
Search results for: GEOMETRIC WORKING VOLUME
-
Low-volume label-free SARS-CoV-2 detection with the microcavity-based optical fiber sensor
PublicationAccurate and fast detection of viruses is crucial for controlling outbreaks of many diseases; therefore, to date, numerous sensing systems for their detection have been studied. On top of the performance of these sensing systems, the availability of biorecognition elements specific to especially the new etiological agents is an additional fundamental challenge. Therefore, besides high sensitivity and selectivity, such advantages...
-
Interpolation methods in GPR tomographic imaging of linear and volume anomalies for cultural heritage diagnostics
PublicationThis paper presents results of a ground penetrating radar (GPR) survey conducted in St. Joseph’s Church in Gdańsk, Poland. The aim of the study was to produce tomographic imaging of a renovated floor as well as the objects buried under the floor to detect linear and volume inclusions. The assumed track spacing was meaningfully greater than the single signal spacing in each track, which induced the need for interpolation methods...
-
Józef Woźniak prof. dr hab. inż.
PeopleProfessor Józef Woźniak received his M.Sc., Ph.D. and D.Sc. degrees in electronics and telecommunications from the Faculty of Electronics, Gdańsk University of Technology (GUT), Poland, in 1971, 1976 and 1991, respectively. In January 2002 he became a full professor. In 1993 he was elected Associate Dean of the Faculty of Electronics and in 1994 he was he was appointed a Professor at GUT. Simultaneously, from October 1994 till...
-
Obrabotka Metallov-Metal Working and Material Science
Journals -
Living and working beneath the sea – next approach
PublicationThe idea of living beneath the sea is very new if compared with millennia of shipping activity. In fact, ocean surface was considered mainly as medium suitable for transport of persons and goods as well as aggression and robbery. More practical attempts to live “on” the water surface are limited to well protected internal waters. The presented concept of “an underwater-above water accommodation, especially for residential purposes”...
-
Evaluation of working spaces' technical condition of marine diesel engine on the basis of operation research
PublicationThe paper presents the method of evaluation of the technical state of working spaces of a marine diesel engine at the reduced control susceptibility. The method foresees making diagnosis on the basis of the measurements of exhaust gas pressure in the channels connecting engine cylinders with turbocharger's turbine. In the beginning of the article the research objects are characterized i.e. ZVIEZDA main engine of M401 type and the...
-
Influence of geometric imperfections on capacities of silo structures loaded with pressure below atmospheric
PublicationPrzedstawiono probabilistyczną analizę nośności aluminiowego silosu ze wstępnymi imperfekcjami geometrycznymi obciążonego podciśnieniem. Imperfekcje opisano za pomocą dyskretnych odchyłek przyjętych zgodnie z maksymalnymi niedokładnościami dopuszczonymi przez normy. Ponadto wygenerowano imperfekcje płaszcza silosu, stosując jednorodne i niejednorodne pola losowe. Wykonano numeryczne obliczenia geometrycznie i materiałowo nieliniowe.
-
Influence of geometric imperfections on capacities of silo structures loaded with pressure below atmospheric
Publication -
Geometric Specification of Non-Circular Pulleys Made with Various Additive Manufacturing Techniques
Publication -
Statistical description and numerical calculations of cylindrical vertical tanks with initial geometric imperfections
PublicationDokonano identyfikacji rzeczywistych wstępnych imperfekcji geometrycznych stalowych pionowych zbiorników walcowych. Imperfekcje przedstawiono jako pole losowe opisane za pomocą odpowiednio dobranej funkcji korelacyjnej, wartości oczekiwanej oraz obwiedni pola. Wykorzystując własne programy numeryczne przeprowadzono generację zbioru odchyłek geometrycznych zbiornika. Porównano estymatory wygenerowanego pola losowego z parametrami...
-
COMPREHENSIVE MONITORING OF CHANGES IN THE GEOMETRIC STRUCTURE OF A HISTORIC BUILDING THE "SALA BHP" IN GDAŃSK
PublicationThe article presents selected results of the analysis of the comprehensive monitoring of the historical building of the “Sala BHP” in Gdansk. The necessity of monitoring was caused by scratches on its structural and finishing elements that occurred in the previous period. A preliminarily assumed factor that could cause the expansion of existing damages and the possible formation of new ones was the planned implementation of...
-
Application of the Monte Carlo algorithm for solving volume integral equation in light scattering simulations
PublicationVarious numerical methods were proposed for analysis of the light scattering phenomenon. Important group of these methods is based on solving the volume integral equation describing the light scattering process. The popular method from this group is the discrete dipole approximation (DDA). DDA uses various numerical algorithms to solve the discretized integral equation. In the recent years, the application of the Monte Carlo (MC)...
-
Application of Web-GIS for Dissemination and 3D Visualization of Large-Volume LiDAR Data
PublicationThe increasing number of digital data sources, which allow for semi-automatic collection and storage of information regarding various aspects of life has recently granted a considerable rise in popularity to the term “Big data”. As far as geospatial data is concerned, one of the major sources of Big data are Light Detection And Ranging (LiDAR) scanners, which produce high resolution three-dimensional data on a local scale. The...
-
Journal of Hand Surgery-European Volume
Journals -
JOURNAL OF HAND SURGERY-AMERICAN VOLUME
Journals -
Journal of Dynamical Systems and Geometric Theories
Journals -
Does Tempo of Resistance Exercise Impact Training Volume?
Publication -
Gray matter volume in relation to cardio-vascular stiffness
Publication -
Economic Foundations for Creative Ageing Policy, Volume II
Publication -
Economic Foundations for Creative Ageing Policy, Volume I
Publication -
Representative volume element in 2D for disks and in 3D for balls
Publication -
Experimental study of pressure rise at the evaporator of capillary pumped loop with acetone and water as working fluids
PublicationIn this work studied is the possibility of fluid pumping using capillary forces in the capillary pumped loop. Experimental and theoretical studies have been performed to understand the phenomena associated with heat transfer in porous structure of the evaporator. The capillary effect was studied during operation of two different capillary porous structures with two different working fluids, namely water and acetone. The results...
-
The Impact of Thermal Stresses on Volume Resistivity: Performance Comparison between TR-XLPE and XLPE Cables
PublicationMost failures in electric power cables are attributed to the development of water trees inside the insulating materials. Thus, the development and utilization of Tree Retardant Cross-Linked Polyethylene (TR-XLPE) based cables have recently been given great attention to overcome the treeing issues. TR-XLPE cables use low-density polyethylene compounds suppressing the formation of water trees while retaining excellent electrical,...
-
Reliability of quality forecast for hybrid metal-working machinery
Publication -
Optimization of working conditions of thick-film LSFO bolometers
PublicationPrzedstawiono opracowaną przez autorów metodę wytwarzania bolometrów w technologii LTCC. Jako warstwy aktywne wykorzystano niestechiometryczne tlenki lantanowo-strontowo żelazowe (LSFO). Przedstawiono wyniki pomiarów wybranych właściwości bolometrów oraz charakterystyki wykorzystane w procesie doboru punktu pracy bolometru.
-
Mass spectrometry based identification of geometric isomers during metabolic stability study of a new cytotoxic sulfonamide derivatives supported by quantitative structure-retention relationships
PublicationA set of 15 new sulphonamide derivatives, presenting antitumor activity have been subjected to a metabolic stability study. The results showed that besides products of biotransformation, some additional peaks occurred in chromatograms. Tandem mass spectrometry revealed the same mass and fragmentation pathway, suggesting that geometric isomerization occurred. Thus, to support this hypothesis, quantitative structure-retention relationships...
-
Piotr Jasiński prof. dr hab. inż.
PeoplePiotr Jasinski obtained MSc in electronics in 1992 from the Gdansk University of Technology (GUT), Poland. Working at GUT, he received PhD in 2000 and DSc in 2009. Between 2001 and 2004 Post Doctoral Fellow at Missouri University of Science and Technology, while between 2008 and 2010 an Assistant Research Professor. Currently is an Associate Professor at Gdansk University of Technology working in the field of electronics, biomedical...
-
The Influence of Loop Heat Pipe Evaporator Porous Structure Parameters and Charge on Its Effectiveness for Ethanol and Water as Working Fluids
PublicationAbstract: This paper presents the results of experiments carried out on a specially designed experimental rig designed for the study of capillary pressure generated in the Loop Heat Pipe (LHP) evaporator. The commercially available porous structure made of sintered stainless steel constitutes the wick. Three different geometries of the porous wicks were tested, featuring the pore radius of 1, 3 and 7 um. Ethanol and water as two...
-
ANALYSIS OF WORKING CONDITIONS OF BEARINGS NO.1 & NO.2 OF TURBINE 13K200 AND DESIGN DEVELOPMENT OF NEW BEARINGS FOR THE TURBINE AFTER RETROFITTING
PublicationThe main goal of the work consisted of preparing an analysis of working conditions of bearings No.1 and No.2 in the existing turbine 13K200, as well as designing geometries of new bearings which would allow for their proper functioning in the turbine following its retrofitting (work under higher load).
-
Percentage of the working age population in selected EU countries in 2006 and 2017
Open Research DataThe phenomenon of aging of the society, and thus changes in the structure of the share of population in pre- and post-working age, is typical for all European Union countries. The median age of the population in the European Union countries in 2001-2016 increased from 38.5 years to 43 years. This is the scale of the aging of the population (Median age...
-
International Journal on Working Conditions
Journals -
Bucharest Working Papers in Linguistics
Journals -
Robert Bogdanowicz dr hab. inż.
PeopleRobert Bogdanowicz received his Ph.D. degree with honours in Electronics from the Gdansk University of Technology. He worked as a post-doc researcher in Ernst-Moritz-Arndt-Universität Greifswald Institut für Physik. He has initiated optical emission imaging of muti-magnetron pulsed plasma and contributed to the development of antibacterial implant coatings deposited by high-power impulse magnetron sputtering. He moved back to...
-
Issues related to noise and protection against noise against the background of hazards present in the working environment
PublicationNoise is one of the physical factors that poses the greatest threat in the working environment. In order to reduce the noise exposure, noise reduction at the source should be considered. Next, the engineering and administrative controls are being developed. Finally, hearing protectors are used. Issues related to protection against noise are part of the topics in the field of occupational...
-
Investigation method of large-volume tire with mobile test rig
PublicationThe goal of this research is to develop the tire test method and mobile tire test rig. The test rig enables measurement of tire properties as stiffness and viscous damping in vertical direction, and tire–ground characteristics on the asphalt rigid surface. The tire-ground characteristics are measured by force and a torque measurement hub. The design, calibration and the algorithm for calculating the forces in the wheel center are...
-
Apparent molar volume and compressinility of tetrabutylphosphonium bromide in various solvents
PublicationW oparciu o pomiary gęstości wyznaczono pozorne objętości molowe bromku czero-n-butylofosfoniowego w etanolu, 1-propanolu, 1-butanolu, acetonie i acetonitrylu w przedziale temperatur od 288,15 K do 323,15 K. Ponadto zmierzone w 298,15 K szybkości rozchodzenia się dźwięku w badanych cieczach pozwoliły obliczyć pozorne ściśliwości adiabatyczne bromku. Wielkości pozorne ekstrapolowano do nieskończenie rozcieńczonego stężenia w celu...
-
On the importance of initial volume of eroded material for cavitation erosion curve
PublicationW pracy przedstawiono rozważania na temat wpływu początkowej objętości erodowanego materiału na przebieg krzywych erozyjnego niszczenia
-
Determination of representative volume element in concrete under tensile deformation
PublicationW artykule podano sposoby określenia elementu reprezentatywnej objętości w betonie podczas rozciągania. Obliczenia wykonano przy zastosowaniu izotropowego modelu degradacji sztywności rozszerzonego o długość charakterystyczną mikrostruktury w ramach teorii nielokalnej. Zaproponowano 2 różne metody wyznaczania elementu reprezentatywnej objętości niezależnego od warunków brzegowych.
-
The methodology of design of satellite working mechanism of positive displacement machine
PublicationIn this paper is described a methodology of design of satellite mechanism consisting of two noncircular gears (externally toothed rotor and internally toothed curvature) and circular gears (satellites). In the presented methodology is assumed that the rotor pitch line is known, and the curvature pitch line is necessary to designate. The presented methodology applies to mechanisms for which the number of the curvature humps is at...
-
Law requirements of explosion proof protection at working with chemical substances
Publication -
Negative psychological aspects of working with experimental animals in scientific research
Publication -
Design and numerical study of turbines operating with MDM as working fluid
Publication -
Poll Reader - the working prototype of optical mark recognition software
PublicationAutomatyczne rozpoznawanie zaznaczeń wydaje się stosunkowo prostym zadaniem z dziedziny przetwarzania dokumentów, a komercyjne systemy OMR są dostępne na rynku już od dłuższego czasu. Zdecydowaliśmy się jednak na stworzenie prostego darmowego oprogramowania, które mogłoby być wykorzystywane przez uczelnie zobowiązane do przeprowadzania ankiet wśród studentów. W rozdziale opisano konstrukcję programu oraz najważniejsze algorytmy...
-
Comparative Analysis of Working Conditions in the European Union Member States
Publication -
The idea of a geothermal power station working in national geological conditions.
PublicationPrzedstawiono koncepcję elektrowni geotermalnej pracującej w krajowych warunkach geologicznych. Przeprowadzono analizę obiegu Clausiusa-Rankine'a i na tej podstawie dobrano parametry obiegu na czynnik niskowrzący - izobutan. Określono główne wymiary urządzeń do realizacji technicznej takiej elektrowni. Przeprowadzono uproszczoną analizę ekonomiczną takiej inwestycji.
-
Real-time working gas recognition system based on the array of semiconductor gas sensors and portable computer Raspberry PI
PublicationThe gas-analyzing systems based on the array of partially selective gas sensors and pattern-recognition techniques are potentially fast and low-cost alternative for other devices, like gas analysers. They give the possibility of recognition the type and the concentration of measured volatile compounds in their working environment. In this work we present the implementation of gas recognition system, in which the signals from an...
-
"Creating a numerical model of noise conditions based on the analysis of traffic volume changes in cities with low and medium structure.
PublicationThe subject of this research study is to analyze noise conditions of the selected area in the city of Gdańsk using data related to traffic volume changes during a day. This is because daily distribution of noise levels is much more helpful for noise control and reduction than traditional maps with Lden levels indicated. Calculations are made with the use of a numerical model developed at the Gdansk Univ. of Technology and implemented...
-
"Creating a numerical model of noise conditions based on the analysis of traffic volume changes in cities with low and medium structure.
PublicationThe subject of this research study is to analyze noise conditions of the selected area in the city of Gdańsk using data related to traffic volume changes during a day. This is because daily distribution of noise levels is much more helpful for noise control and reduction than traditional maps with Lden levels indicated. Calculations are made with the use of a numerical model developed at the Gdansk Univ. of Technology and implemented...
-
Assessment, optimisation and working fluid comparison of organic rankine cycle combined with negative CO2 gas power plant system
PublicationThis study aims to investigate the application of the Organic Rankine Cycle (ORC) as an alternative to low-pressure expansion in the negative CO2 power plant (nCO2PP). The reason for this study is that a detailed analysis of nCO2PP indicates a certain amount of waste heat present in the exhaust gas from the high-to-intermediate pressure gas turbine. Some of this energy can be used by the application of the expansion in a low-pressure...
-
Evaluation of the influence of the opening pressure of a marine Diesel engine injector on the results of numerical simulation of the working cycle and their comparison with the results of the laboratory experiment
PublicationThe article presents the results of a numerical simulation of the working process carried out in a diesel engine. In the applied utility program DIESEL-RK, the laboratory engine Farymann Diesel type D10 was implemented. A selected inoperability of its functional fuel supply system - reduced opening pressure of the injector pinj - was introduced. The values of adequate diagnostic parameters were determined: working gas temperature...