Search results for: methane hydrate
-
Study of Direct Methanol Fuel Cell Process Dynamics Using Dynamic Electrochemical Impedance Spectroscopy
PublicationA new technique, which was developed to characterize the direct methanol fuel cell under work conditions, has been presented in this paper. The impedance measurements were made using dynamic electrochemical impedance spectroscopy research technique in the galvanostatic mode, using multiple sinusoidal excitation. Obtained results show, that together with an increase of the temperature and working load, the global impedance...
-
Microcrystalline Cellulose Management in the Production of Poly(ether-urethane)s- Structure, Morphology, and Thermal Characteristic
PublicationIn response to the demand of polymer industry for reducing the use of synthetic chemicals, eco-friendly materials are investigated. In the presented study, bio-based poly(ether-urethane)s were prepared by using microcrystalline cellulose (MCC) and polyether polyol and 1,3-propanediol derived from corn sugar. A step towards sustainability was taken by incorporating bio-based compounds and cellulose, consequently, bio-waste are utilized...
-
Green thermoplastic poly(ether-urethane)s – synthesis, chemical structure and selected properties investigation
PublicationThis work aimed to characterize the effect of the monomers chemical structure on the selected properties of the green thermoplastic poly(ether-urethane)s. During synthesis two types of polyether biopolyols, 4,4′-diphenylmethane diisocyanate and bio-based 1,3-propanediol were employed. Materials were synthesized with the use of two step method and two different prepolymers, which were mixed together in equimolar quantities. Obtained...
-
Reactions of methyl radicals with silica supported silver nanoparticles in aqueous solutions
PublicationSilica supported silver nanoparticles (Ag°–SiO2 –NCs, NCs=nanocomposites) suspended in aqueous solutions are efficient catalysts for the dimerization of methyl radicals to produce ethane, while bare silica is quite inert towards the interaction with methyl radicals. In the presence of small amounts of ethanol adsorbed on the SiO2 surface, the reaction path with methyl radicals is changed and methane is formed as the major product.
-
Rudy i Metale Nieżelazne
Journals -
Dyfuzyjne spalanie turbulentne metanu w strudze: analiza numeryczna płomienia Sandia D
PublicationDyfuzyjne spalanie turbulentne jest najpowszechniej występującym w zastosowa-niach przemysłowych rodzajem tego procesu. Jednak jego dokładny opis wciąż sprawia trudności i obserwuje się rozwój konkurujących modeli implementowanych w podejściu RANS (Reynolds Averaged Navier Stokes), a współcześnie coraz częściej także w metodzie dużych wirów (LES) o czym świadczą liczne publikacje [13, 16, 18, 21]. W niniejszej pracy przedstawiono...
-
Solvation numbers of manganese(II) and zinc(II) perchlorates in methanol obtained from volumetric and compressibility properties
PublicationZmierzono gęstości roztworów nadchloranów manganu(II) i cynku(II) w metanolu w temperaturach: 283.15, 288.15, 293.15, 298.15, 303.15, 308.15, 313.15 K. Ponadto wyznaczono szybkości rozchodzenia się dźwięku w badanych roztworach w 298.15 K. Uzyskane wielkości pozwoliły na obliczenie pozornych objętości molowych oraz pozornych molowych ściśliwości adiabatycznych elektrolitów w metanolu. Oszacowane wielkości graniczne wykorzystane...
-
Analysis of spectral data by complementary methods. Inspection of the molecular complex in N,N-dimethylformamide - methanol mixtures
PublicationDane widmowe FTIR mieszanin N,N-dimetyloformamidu z metanolem poddano anlizie faktorowej oraz analizie metodą ważonych widm różnicowych. Przydatność obu metod analizy w odniesieniu do układów z wiązaniem wodorowym poddano krytycznej dyskusji. Stwierdzono obecność kompleksu molekularnego typu 1:1 w całym zakresie składów mieszanin. Forma tego kompleksu zależy jednak od składu roztworu. Postulowano występowanie słabych wiązań wodorowych...
-
Quantification of methadone and its metabolites: EDDP and EMDP determined in autopsy cases using LC‐MS/MS
Publication -
Fabrication of the cross-linked PVA/TiO2/C nanocomposite membrane for alkaline direct methanol fuel cells
PublicationA crosslinked Poly(vinyl alcohol) based composite membrane was developed through a phase inversion process for use in alkaline direct methanol fuel cells (ADMFCs). The titanium dioxide (TiO2) and carbon nanoparticles (NPs) have been incorporated into the PVA polymer matrix to improve the mechanical and thermal properties. The membrane samples were further modified with maleic acid, a carboxylic acid acting as the cross-linker,...
-
Heat Transfer During Pool Boiling of Water, Methanol and R141b on Porous Coated Horizontal Tube Bundles
PublicationThis paper presents the results of experimental investigation of water, methanol and R141b refrigerant boiling on horizontal porous coated tube bundles supposed to represent a flooded-type evaporator. Experiments were carried out for a bundle of 19 tubes in triangular layout for two pitch-to-diameter ratio values – 1.7 and 2.0 – in atmospheric and sub-atmospheric pressure conditions. Average heat transfer coefficients – both local,...
-
Heat transfer during pool boiling of water, methanol and R141b on porous coated horizontal tube bundles
PublicationPrzedstawiono wyniki badań eksperymentalnych wrzenia wody, metanolu i R141b na poziomym pęczku rur pokrytych metaliczna powłoką porowatą. Badania przeprowadzono dla podziałek rur 1.7d oaz 2d, przy ciśnieniu atmosferycznym i podciśnieniu.
-
Novel bio-based thermoplastic poly(ether-urethane)s. Correlations between the structure, processing and properties
PublicationThe main purpose of this work was to analyze the effect of the number of unreacted isocyanate groups and the [NCO]/[OH] molar ratio during the chain extension of a prepolymer during the polymerization process on the structure, processing and selected properties of thermoplastic poly(ether-urethane)s. Three series of novel thermoplastic polyurethanes were obtained via a prepolymer route. Three prepolymers were synthesized from diisocyanate...
-
Reaction of methanol ligated manganese(II) silanethiolate with pyridine related ligands - different structures of complexes with MnNO2S2 kernel
PublicationReakcja silanotiolanu manganu(II) z pirydyną i jej metylowymi pochodnymi prowadzi do uzyskania heteroleptycznych kompleksów o tym samym rdzeniu MnNO2S2, ale o różnym typie strukturalnym. W przypadku posłużenia się pirydyną i 2-metylopirydyną uzyskano układy zawierające dwie cząsteczki alkoholu przykoordynowane do centrum metalicznego. Z kolei w przypadku 3- i 4-metylopirydyny funkcję S,O-donorów spełniają reszty silanotiolanowe.
-
Electro oxidation of methanol and ethanol on poly(3,4-ethylenedioxythiophene) with dispersed Pt, Pt+Sn, and Pt+Pb particles.
PublicationWpływ mikrocząstek cyny i ołowiu na aktywność katalityczną platyny zdyspergowanej na podłożu polimerowym poli(3,4 etylenodioksytiofenu) w stosunku do reakcji elektrodowego utleniania alkoholu etylowego i metylowego określono za pomocą metody chronowoltamperometrycznej, spektroskopii fotoelektronów w zakresie promieniowania x (XPS) oraz mikrowagi elektrochemicznej. Wykazano,że zarówno cyna jak i ołów zwiększają szybkość procesu...
-
Solvation of cobalt(II) ion in N,N-dimethylformamide-methanol mixed solvent: calorimetry and VIS spectroscopy studies
PublicationZmierzono entalpie rozpuszczania trifluorometanosulfonianów Co(II) i Na(I) w mieszaninie N,N-dimetyloformamid(DMF)-metanol(MeOH) w całym zakresie jej składu. Z danych tych wyznaczono entalpie przeniesienia jonu Co(II) i jonu trifluorometanosulfonowego. Wyniki zanalizowano za pomocą teorii solwatacji preferencyjnej. Zmierzono również widma w zakresie widzialnym roztworów jonu Co(II) w mieszaninie DMF-MeOH i zanalizowano je, stosując...
-
l-ascorbic acid modified poly(ester urethane)s as a suitable candidates for soft tissue engineering applications
PublicationIn this paper we created novel poly(ester urethane)s (PESUs) designed specifically for tissue engineering. The PESUs were derived from oligomeric α,ω-dihydroxy(ethylene-butylene adipate) (dHEBA), 1,4-butanediol (BDO) and aliphatic 1,6-hexamethylene diisocyanate (HDI) and modified with l-ascorbic acid to improve their biocompatibility. In addition, we determined their mechanical properties (such as tensile strength, elongation at...
-
Comparison of the coordination geometries of Zn(II) and Cd(II) ions in complexes with water, methanol and bulky aryloxysilanethiolate ligands
PublicationZinc and cadmium complexes containing silanethiolate anions and methanol or water were synthesized and characterized by X-ray diffraction, FT-IR and NMR spectroscopy, and DFT calculations. Contrary to zinc, the cadmium ion utilizes very weak donors to complete its coordination sphere; it forms contacts to phenyl rings of the silanethiolate ligand. Two zinc analogs of the general formula [Zn{SSi(OAr)3}2(L)2] where L = CH3OH (2)...
-
Synthesis, structure and properties of poly(ether-urethane)s synthesized using a tri-functional oxypropylated glycerol as a polyol
PublicationThe main aim of this work was to obtain poly(ether-urethane)s using tri-functional polyoxyalkylene polyol (Rokopol G1000), which introducing the chemical cross-links into the structure of polyurethanes. Poly(ether-urethane)s were prepared using two-step method, called prepolymer method, which involves in the first step the reaction of 4,4'-diphenylmethane diisocyanate (MDI) and tri-functional polypropylene glycol glycerol triether...
-
The role of hydrogen bonding on tuning hard-soft segments in bio-based thermoplastic poly(ether-urethane)s
PublicationThis work describes the preparation of bio-based thermoplastic poly(ether-urethane)s (TPU) via a prepolymer method and investigates the effect of varying the interphase hydrogen-bonding (H-bonding) on physicochemical, thermal and mechanical properties. This was achieved by varying the glycol type and molar ratio of [NCO]/[OH] groups used during the prepolymer chain extending step. The TPUs’ chemical structure was analyzed by Fourier...
-
On the coupling of hydride generation with atmospheric pressure glow discharge in contact with the flowing liquid cathode for the determination of arsenic, antimony and selenium with optical emission spectrometry
Publication -
Synthesis, structure and properties of poly(ester-urethane)s obtained using bio-based and petrochemical1,3-propanediol and 1,4-butanediol
PublicationIn this paper, the poly(ester-urethane)s obtained using petrochemical and bio-based chain extenders were prepared and characterized. The influence of glycols’ origin on the chemical structure, mechanical and thermal properties of the prepared polyurethanes was studied. The materials were synthesised by prepolymer method. The first step involved the reaction of α,ω-dihydroxy(ethylene-butylene adipate (POLIOS 55/20) with 4,4’-diphenylmethane...
-
NUMERICAL ANALYSIS OF SPECIES DIFFUSION AND METHANOL DECOMPOSITION IN THERMOCATALYTIC REACTOR BASED ON THE INTERMETALLIC PHASE OF Ni3Al FOR LOW REYNOLDS NUMBERS
PublicationNumerical modelling of hydrogen production by means of methanol decomposition in a thermocatalytic reactor using corrugated foil made of the Ni3Al intermetallic phase is shown in the paper. Experimental results of the flow analysis of mixtures containing helium and methanol in a thermocatalytic reactor with microchannels were used for the initial calibration of the CFD calculations (calculations based on the Computational Fluid...
-
Photocatalysts for Solar Energy Conversion
PublicationPhotocatalytic oxidation over suspended solid photocatalysts (e.g., titanium dioxide) has been proposed as a sustainable process for treatment and purification of water and wastewater as well as the process for photoconversion of solar energy to hydrogen, methane, and other low hydrocarbons. Solar radiation could be used to drive heterogeneous electrochemical reactions at the surface of an optically active photocatalyst (e.g.,...
-
μ-4,4'-bipyridyl-1:2κ2N:N'-methanol-2κO-tetrakis(tri-tert-butoxysilanethiolato)-1κ4O,S; 2κ2S-dizinc(II)
PublicationTytułowy związek jest dwujądrowym kompleksem, w którym atomy cynku są połączone poprzez mostkujący ligand 4,4'-bipirydyl. Jeden z atomów cynku jest pięcio-koordynowany za pośrednictwem dwóch chelatujących reszt silanotiolanowych oraz 4,4'-bipirydylu. Jako dodatkowy ligand na drugim atomie cynku występuje cząsteczka metanolu.
-
Excess volumes of mixing in (N,N-Dimethylacetamide+methanol+water) and (N,N-Dimethylacetamide+ethanol+water) at the temperature 313.15 K
PublicationW pracy podane są rezultaty precyzyjnych pomiarów namiarowych objętości molowych dla dwóch układów trójskładnikowych zawierających wodę, amid alifatyczny (N,N-dimetyloacetamid) oraz alkohol: metanol lub etanol. Dla wszystkich badanych układów obserwowane są duże i ujemne wartości nadmiarowych objętości mieszania, wskazujące na obecność silnych oddziaływań międzycząsteczkowych.
-
Solvation of cobalt(II) and trifluoromethanesulfonate ions in N,N-dimethylformamide-methanol mixed solvent studied by means of FT-IR spectroscopy
PublicationWidma FT-IR roztworów Co(CF3SO3)2-N,N-dimetyloformamid-metanol były analizowane w zakresie pasm CO i OH za pomocą metody widm różnicowych. Wyznaczono liczbę cząsteczek DMF i MeOH w pierwszej sferze solwatacji jonu Co(II) w zależności od składu rozpuszczalnika. Stwierdzono także obecność drugiej sfery solwatacji jonu Co(II) i scharakteryzowano ją ilościowo. Zbadano również solwatację jonu tifluorometanosulfonowego oraz asocjację...
-
A facile hydrous mechano-synthesis of magnesium hydroxide [Hy-Mg(OH)2] nano fillers for flame-retardant polyester composites
Publication -
Processing of Polyester-Urethane Filament and Characterization of FFF 3D Printed Elastic Porous Structures with Potential in Cancellous Bone Tissue Engineering
PublicationThis paper addresses the potential of self-made polyester-urethane filament as a candidate for Fused Filament Fabrication (FFF)-based 3D printing (3DP) in medical applications. Since the industry does not provide many ready-made solutions of medical-grade polyurethane filaments, we undertook research aimed at presenting the process of thermoplastic polyurethane (TPU) filament formation, detailed characteristics, and 3DP of specially...
-
Electrocatalytic oxidation of methanol, ethylene glycol and glycerine in alkaline media on TiO2 nanotubes decorated with AuCu nanoparticles for an application in fuel cells
PublicationIn this work, we present the catalytic and photocatalytic activity of AuCu nanostructures obtained on TiO2 nanotubes toward methanol, ethylene glycol and glycerine oxidation. The electrode material is prepared by anodization of Ti foil, thin AuCu layer sputtering and rapid thermal treatment under argon atmosphere. Scanning electron microscopy images confirmed the presence of ordered tubular architecture of TiO2 as well as nanoparticles...
-
Badanie fitoremediacji zawierających metale ciężkie mieszanin osadów ściekowych i popiołów przy użyciu jęczmienia jarego
Publication -
Jarosław Chojnacki prof. dr hab. inż.
PeopleBorn in 1961 in Bydgoszcz, professional education started at the Chemical Technical Highschool (I. Łukasiewicz). He graduated from the Faculty of Chemistry at the Gdańsk University of Technology in 1986, defending the work on ion-selective electrodes. Subsequent studies were related to organic and siliconorganic synthesis and, from 2002 year on, to crystallography. The doctoral thesis concerned the Silanotiolanes of coinage metals...
-
The sensitivity of bacteria to heavy metals in presence of mineral ship motor oil in coastal marine sediments and waters.
PublicationThe sensitivity of bacteria, isolated from coastal marine sediments and waters of Sopot beach, Gdańsk Bay (Poland), to heavy metals in the presence of mineral ship motor oil were studied. All isolated heterotrophic bacteria were resistant to the 0.1 mM lead concentration occurring in the environment. Metal resistance of bacteria isolated from coastal water was strongly related to mineral ship motor oil concentration. At 0.1% mineral...
-
Morphine and methadone pre-exposures differently modify brain regional Fos protein expression and locomotor activity responses to morphine challenge in the rat
Publication -
Hydrogen Production Mechanism in Low-Temperature Methanol Decomposition Catalyzed by Ni3Sn4 Intermetallic Compound: A Combined Operando and Density Functional Theory Investigation
PublicationHydrogen production from methanol decomposition to syngas (H2 + CO) is a promising alternative route for clean energy transition. One major challenge is related to the quest for stable, cost-effective, and selective catalysts operating below 400 °C. We illustrate an investigation of the surface reactivity of a Ni3Sn4 catalyst working at 250 °C, by combining density functional theory, operando X-ray absorption spectroscopy, and high-resolution...
-
Structure and properties comparison of poly(ether-urethane)s based on nonpetrochemical and petrochemical polyols obtained by solvent free two-step method
PublicationThe application of thermoplastic polyurethanes (TPU) is becoming more and more extensive, and the decreasing of used petrochemical monomers and reduction of energy for the polymerization and processing processes is getting increasingly important. In this paper, we confirmed the positive influence of high bio-based monomers contents (by replacing petrochemical polyol and glycol by bio-based counterparts) on processing and properties...
-
Nowy typ analizatora do oznaczania wodoru, metanu, etanu i propanu w zakresie dolnej granicy wybuchowości
Publication.
-
Thermodynamic Properties of Inorganic Salts in Nonaqueous Solvents. VI. Apparent Molar Volumes, Expansibilities, and Compressibilities of Divalent Transition Metal Ions in Methanol and Dimethylsulfoxide
PublicationThe temperature dependence of the density of divalent transition metal perchlorates in dimethylsulfoxide as well as cobalt(II), nickel(II) perchlorates, and copper(II) trifluoromethanesulfonate in methanol was determined. Moreover, sound velocities for solutions of cobalt(II), nickel(II) perchlorates, and copper(II) trifluoromethanesulfonate in methanol have been measured at 298.15 K. From these data, the partial molar volumes,...
-
An effective method for studying intermolecular interactions in binary liquids with hydrogen bonds: FTIR spectra and ab initio calculations in the N-methylformamide - methanol system
PublicationMolecular complexes in methanol (MeOH)−N-methylformamide (NMF) mixtures were studied based on their FTIR-ATR spectra, to which two methods of analysis were applied: factor analysis and a quantitative version of the difference-spectra method. The mean composition of a complex between NMF and MeOH molecules over the whole range of mixture compositions was determined. Absorbing species differentiated with regard to the interaction...
-
<i>catena</i>-Poly[[[bis(thiourea-κS)cadmium]-di-μ-thiocyanato-κ<sup>2</sup>N:S;κ<sup>2</sup>S:N] dihydrate]
PublicationTytułowy związek tworzy jednowymiarowy łańcuch na skutek występowania mostkujących grup SCN pomiędzy atomami kadmu. Atomy kadmu obsadzają krystalograficzne środki symetrii i są koordynowane oktaedrycznie (zdeformowany oktaedr) przez 2 atomy S i 2 atomy N z mostkujących ligandow SCN oraz przez 2 atomy S z dwóch cząsteczek tiomocznika. Upakowanie jest wspomagane przez dodatkowe wiązania międzycząsteczkowe OH...S, NH...O i NH...N....
-
Mocz jako źródło informacji o narażeniu zawodowym na metale = Urine as a source of information on occupational exposure to metals- a review
PublicationW pracy przedstawiono informacje na temat możliwości wykorzystywania próbek moczu ludzkiego jako materiału do badań analitycznych ukierunkowanych na uzyskanie informacji o narażeniu zawodowym na metale. Szczególną uwagę zwrócono na:-techniki izolacji i wzbogacania metali i ich metabolitów z próbek moczu,-techniki oznaczania metali w otrzymywanych ekstraktach,-zebranie informacji literaturowych odnośnie oznaczanych stężeń metali...
-
Metale ciężkie w odciekach i ściekach technologicznych ze składowisk odpadów komunalnych w aspekcie zmian sposobów ich zagospodarowania
PublicationW pracy przedstawiono wyniki badań sześciu metali ciężkich (cynku, miedzi, ołowiu, niklu, chromu i kadmu) w odciekach i ściekach technologicznych powstających w zakładach zagospodarowania odpadów komunalnych. Przeprowadzono analizy w czterech wybranych zakładach zlokalizowanych w województwie pomorskim. Wykazano, że pod względem zawartości metali ciężkich odcieki generowane w kwaterach składowych nowego typu, gromadzących odpady...
-
Excess Gibbs energies and excess molar volumes for binary mixtures: (2-pyr-rolidone+water), (2-pyrrolidone+methanol), and (2-pyrrolidone+ethanol) at the temperature 313.15K
PublicationZmierzono całkowite prężności pary oraz zmiany objętości mieszania dla tytułowych układów dwuskładnikowych w temperaturze 313.15K. Rezultaty zostały porównane z wynikami uzyskanymi poprzednio dla pozostałych amidów N-metylofor-mamidu, N,N-dimetyloformamidu oraz N-metyloacetamidu.
-
Preferential solvation in (amide+alcohol) binary mixtures. Part 2. The N-methylpyrrolidinone+methanol mixture at T = 313.15 K: thermodynamic resultsand molecular dynamics calculations.
PublicationBadano zjawisko preferencyjnej solwatacji amidu (N-metylopyrrolidonu) przez metanol wykorzystując dwie uzupełniające się metody: bezpośrednich pomiarów własności termodynamicznych roztworu oraz symulacji komputerowych. W metodzie pierwszej dokonano pomiarów wielkości termodynamicznych takich jak: nadmiarowa energia swobodna mieszania, nadmiarowa objętość mieszania oraz współczynnika ściśliwości izotermicznej mieszaniny,...
-
High-performance liquid chromatography thermodynamic study of new potential antiepileptic compounds on a cholesterol column using isocratic elution with methanol/water and acetonitrile/water eluent systems
Publication -
<p>Mechano-signalling, induced by fullerene C<sub>60</sub> nanofilms, arrests the cell cycle in the G2/M phase and decreases proliferation of liver cancer cells</p>
Publication -
The first compound with an unusual type of anion, [Li(SR)2]-:bis(µ2-aqua-d2)tetrakis(aqua-d2)]dilithium(I)bis[bis(tri-tert-butoxysilanethiolato-k2O,S)lithate(I)]dihydrate-d2
PublicationTytułowy związek [Li2(D2O)6][Li(C9H27SSiO3)2]2*2D2O, jest pierwszym związkiem z wiązaniem S-M (M-metal alkaliczny), zawierającym niespotykany typ anionu litanowego: [Li(SR)2]-,gdzie R=Si{OC{CH3)3}3. Centrum symetrii związku znajduję się pośrodku pierścienia Li2O2 wchodzącego w skład kationu. Wszystkie atomy litu budujące rdzenie kationów - LiO4 i anionów - LiO2S2, są czterokoordynacyjne. Jednoujemne aniony [Li(SR)2]- są dobrze...
-
(4-(Bis(4-Fluorophenyl)Methyl)Piperazin-1-yl)(Cyclohexyl)Methanone Hydrochloride (LDK1229): A New Cannabinoid CB1 Receptor Inverse Agonist from the Class of Benzhydryl Piperazine Analogs
PublicationSome inverse agonists of cannabinoid receptor type 1 (CB1) have been demonstrated to be anorectic antiobesity drug candidates. However, the first generation of CB1 inverse agonists, represented by rimonabant (SR141716A), otenabant, and taranabant, are centrally active, with a high level of psychiatric side effects. Hence, the discovery of CB1 inverse agonists with a chemical scaffold distinct from these holds promise for developing...
-
Effect of molar ratio [NCO]/[OH] groups during prepolymer chains extending step on the morphology and selected mechanical properties of final bio‐based thermoplastic poly(ether‐urethane) materials
PublicationThe main aim of this work was to investigate the effect of [NCO]/[OH] molar ratio used during the prepolymer chain extending step (with bio‐based diols) on the chemical structure, and thermomechanical and mechanical properties of thermoplastic poly(ether‐urethane)s. Thermoplastic poly(ether‐urethane)s were obtained from bio‐based polyol (polytrimethylene ether glycol), bio‐based glycol (1,4‐butanediol or 1,3‐propanediol), and 4,4'diphenylmethane...
-
The effect of high molecular weight bio-based diamine derivative of dimerized fatty acids obtained from vegetable oils on the structure, morphology and selected properties of poly(ether-urethane-urea)s
PublicationIn this work, the effect of the high molecular weight bio-based diamine on the chemical structure and selected properties of poly(ether-urethane-urea)s has been investigated. The ether-urethane prepolymer was cured using 1,4-butanediol and/or bio-based diamine. Mentioned chain extenders were used separately or in the mixture, and their different molecular weight and chemical structure resulted in obtaining materials with diversified...