dr hab. inż. Piotr Mioduszewski
Zatrudnienie
- Profesor uczelni w Instytut Mechaniki i Konstrukcji Maszyn
Publikacje
Filtry
wszystkich: 56
Katalog Publikacji
Rok 2003
-
Symulacja hałasu emitowanego przez przejeżdżający pojazd
PublikacjaPrzedstawiono program komputerowy Vehicle Noise Simulation umożliwiający przeprowadzenie symulacji hałasu przejeżdżającego pojazdu w oparciu o charakterystyki kierunkowe dźwięku emitowanego przez poszczególne źródła hałasu w pojeździe takie jak: opony, silnik, układ wydechowy.
-
Wpływ prędkości na hałas opon samochodowych.
PublikacjaPrzedstawiono szczególną analizę wpływu prędkości na poziom i widmo hałasu opon emitowanego do środowiska jak również oddziaływującego na osoby podróżujące samochodem. Opisano eksperyment badawczy przeprowadzony w laboratorium Politechniki Gdańskiej w celu wyznaczenia dokładnej zależności poziomu hałasu opon i jego widma od prędkości toczenia.
Rok 2004
-
Nowoczesne urządzenia do badania tekstury nawierzchni drogowej
PublikacjaDokonano przeglądu urządzeń do badania tekstury nawierzchni drogowej różnymi metodami. Opisano urządzenia dawniej stosowane (badania metodą wolumetryczną oraz metodą wypływu cieczy), natomiast szerzej przedstawiono nowoczesne metody badań metodą profilometryczną. Zaprezentowano także nowoczesne urządzenia trójwymiarowe do pomiaru tekstury - system T3D. Przeanalizowano wady i zalety poszczególnych urządzeń do różnych zastosowań.
Rok 2005
-
Badania właściwości akustycznych komór semi-bezechowychprzyczep do badania hałasu opon: Tiresonic MK2, Tiresonic MK3 oraz Slipsonic
PublikacjaPrzyczepy badawcze: Tiresonic MK2, Tiresonic MK3 oraz SlipSonic służą do badania hałasu opon do samochodów osobowych i dostawczych. Wszystkie przyczepy wyposażone są w komory semo-bezechowe, osłaniające koła z badanymi oponami. omówiono konstrukcję poszczególnych komór. Przedstawiono eksperyment badawczy, którego celem było wyznaczenie własności akustycznych tych komór. Podano i omówiono wyniki tych badań.
Rok 2007
-
Tire/road noise measuring principles according to the Close Proximity Method
PublikacjaW pracy podano metody badania hałasu opon samochodowych. Omówiono przyczepy pomiarowe zbudowane w Politechnice Gdańskiej oraz systemy pomiarowe stosowane do pomiaru hałasu opon zgodnie z metodą CPX.
Rok 2008
-
O oponach informacji kilka
PublikacjaW pracy zaprezentowano krótki rys historyczny pnneumatycznej opony samochodowej. Omówiono budowę opony, wyszczególniono jej typy oraz podano rodzaje rzeźb bieżnika. Omówiono oznaczenia opon, podano zasady doboru ich do samochodu oraz przedstawiono najczęstsze uszkodzenia opon.
Rok 2009
-
Certification of vehicles used for tire/road noise evaluation by CPX method
PublikacjaJednym ze sposobów oceny hałasu opon i nawierzchni drogowych jest metda CPX polegająca na pomiarze hałasu w polu bliskim miejsca współpracy opony z nawierzchnią. Aby uzyskać wysoką dokładność pomiarów niezbędne jest ustanowienie procedur ustanowienie procedur certyfikacyjnych sprzętu pomiarowego a więc głównie pojazdu badawczego. Praca dotyczy procedur certyfikacyjnych wypracowanych przez Grupę Roboczą WG33 ISO/TC43/SC1 oraz w...
-
Directivity of tire/road noise emission for selected tires and pavements
PublikacjaPraca pośwoęcona jest kierunkowości emisji hałasu opon i nawierzchni drogowych. Opony są dominującym źródłem haasu w pojaździe poruszającym się w typowych warunkach ruchu drogowego. Hałas ten nie jest bezkierunkowy jak to przyjmuje się w modelach obliczeniowych hałasu. Takie założenia wynikają z ograniczonej dostępności danych dotyczących kierunkowości i mogą prowadzić do niedokładności przy prognozowaniu hałasu drogowego. Praca...
Rok 2010
-
Are vehicles driven in electric mode so quiet that they need acoustic warning signals?
PublikacjaW referacie przedstawiono i przedyskutowano problematykę znacznej redukcji hałasu emitowanego przez pojazdy z napędem elektrycznym i potencjalnego wzrostu zagrożenia bezpieczeństwa ruchu drogowego związanego z niezauważaniem takich pojazdów przez pieszych uczestników ruchu. Rozważano konieczność instalowania w takich pojazdach specjalnych sygnałów ostrzegawczych. Zestawiano ilość wypadków z udziałem pieszych i pojazdów poruszających...
Rok 2011
-
noise map validation by continuous noise monitoring
PublikacjaArtykuł dotyczy porównania dwóch rodzajów oceny hałasu w aglomeracjigdańskiej. Pierwsza ocena została przygotowana na podstawie prognozy hałasu w oparciu o mapy stworzone metodami obliczeniowymi w roku 2007. Druga ocena bazuje na rzeczywistych danych pomiarowych zarejestrowanych przez system ciągłego monitoringu działającego w aglomeracji od 2008 roku. W artykule zaprezentowano i przeprowadzono analizy występujących różnic pomiędzy...
Rok 2012
-
The importance of the bottom layer in double-layer porous asphalt for noise reduction
PublikacjaDouble-layer porous asphalt concrete (DPAC) surfaces are generally considered to be the acoustically most effective low noise road surfaces ready for implementation. While DPAC used on highways in warm climates may have an average life of around 8 years, in Scandinavia with severe winter climate DPAC usually survive only about 3 years; partly due to wear of studded tyres. An ongoing project in Sweden, applying DPAC and single-layer...
-
Wpływ nawierzchni drogowej na opór toczenia opon samochdowych
PublikacjaW artykule przedstawiono wyniki laboratoryjnych badań oporu toczenia opon na 5 nawierzchniach zamontowanych na bębnach dwóch maszyn bieżnych. Przeanalizowano je w aspekcie wpływu tekstury nawierzchni na współczynnik oporu toczenia opon. Wnioski z tej pracy posłużyły do zaplanowania podobnych badań w warunkach drogowych za pomocą przyczepy dynamometrycznej.
Rok 2013
-
Impact of the surface evenness and texture on tire/road rolling resistance
PublikacjaThis paper deals with the issue of a surface's roughness and texture impact on tire/road rolling resistance. It includes a brief description of research aims, measurements and an analysis of results. It also presents observations and conclusions regarding drum facility modernisation which allows studies concerning surface's roughness and texture impact on tire/road rolling resistance.
-
Noise measurements on low noise pavements - problems with inhomogeneity of wearing course
PublikacjaDuring the last several years, when performing numerous CPX noise measurements on low noise pavements,significant inhomogeneity of the wearing course was observed in numerous cases. Similar problems were almost not existing regarding to the dense pavements.In general three main reasons of inhomogeneity can be defined. The first one are imperfections in technology of production of a asphalt mix or/and errors made already during...
-
PRZEDELĄD HAŁAŚLIWOŚCI NAWIERZCHNI DROGOWYCH W POLSCE I W INNYCH KRAJACH UNII EUROPEJSKIEJ
PublikacjaW pracy przedstawiono szczegółowo dwiemetody badania hałaśliwości nawierzchni drogowych (SPB i CPX) i zaprezentowano wyniki pomiarów przeprowadzonych metodą CPX na nawierzchniach drogowych na przestrzeni ostatnich 14 lat. Pomiary przeprowadzono na 154 odcinkach zlokalizowanych na terenie Polski oraz na 419 odcinkach na terenie innych państw europejskich. Dokonano oceny hałaśliwości warstw scieralnych występujących w naszym kraju...
Rok 2014
-
Noise emitted by SKM Trains in Gdansk
PublikacjaHigh intensity traffic of SKM trains in Gdansk carries a significant level of noise emission. SKM line runs through the central part of the city and therefore in the vicinity of residential areas and recreational facilities. This research was planned and performed to find out what was the real noise emission of SKM trains and to determine whether the measurement noise values are within allowed limits. Individual acoustic events...
-
Pomioary hałasu drogowego
PublikacjaCiągły rozwój motoryzacji i związanej z nią infrastruktury drogowej niesie ze sobą oprócz wielu niekwestionowanych korzyści również zagrożenia dla środowiska naturalnego i zdrowia człowieka. Obok emisji szkodliwych substancji do atmosfery jednym z najistotniejszych zagrożeń związanych z pojazdami i ruchem drogowym jest obecnie hałas. Jest on najbardziej odczuwalny w pobliżu głównych ciągów komunikacyjnych oraz przy trasach szybkiego...
-
Road texture influence on tire rolling resistance
PublikacjaTire rolling resistance is one of the most important resistive forces acting on road vehicles. It depends on tire and surface characteristics as well as vehicle operating parameters. This paper deals with the influence of road surface texture on rolling resistance of passenger car tires. Results of road measurements performed on variety of road surfaces are presented.
-
Temperature influence on tyre/road noise of selected tyres
PublikacjaAir and road temperatures substantially affect road vehicle noise emission. The temperature influence on tyre/road noise depends mainly on tyre-road combination. It is different for dense and porous pavements, for bituminous and cement ones. It differs also depending on tyres. The correction procedures for temperature effect are still under consideration and preparation. Tyre/road noise measurements using CPX method were performed...
-
The best porous asphalt pavement in Sweden so far
PublikacjaIn 2010 a double-layer porous asphalt concrete (DPAC) pavement was constructed in various versions on the E4 motorway through the Swedish city Huskvarna. As a result of a court decision the Swedish Transport Administration had to reduce noise emission by applying a low noise road surface that would reduce A-weighted noise levels by 5 dB, as an average. Earlier experience in Sweden indicated that it was possible to obtain a high...
-
Tyre/road noise reduction by a poroelastic road surface
PublikacjaLow noise road surfaces of existing types may in favourable cases and in new conditions provide up to 7 dB of noise reduction. For higher noise reductions, innovative solutions must be sought. Poroelastic road surfaces (PERS) may be such a solution, which currently is studied in the EU project PERSUADE. This paper presents results of trials with a PERS version prefabricated by one of the project partners. Tests were made in a laboratory...
Rok 2015
-
Final report on noise and rolling resistance
PublikacjaWork Package 6 deals with environmental impacts of PERS use, including noise and rolling resistance. This report covers preliminary noise tests performed in the laboratory and at the road test sites. The obtained results indicate that PERS material reduce noise considerably - up to 12 dB in comparison to SMA16 reference surface. Noise reduction properties are especially visible in the case of factory produced PERS slabs supplied...
-
Hałas emitowany przez samochody z napędem hybrydowym i elektrycznym
PublikacjaStale rosnąca ilość pojazdów samochodowych skutkuje zwiększeniem emisji hałasu, co wpływa negatywnie na środowisko naturalne jak i zdrowie człowieka. Jednym z możliwych sposobów zredukowania poziomu hałasu drogowego może być rozpropagowanie pojazdów z napędem elektrycznym oraz hybrydowym, a co za tym idzie wzrost ich udziału w ruchu drogowym. Artykuł ma celu przedstawienie porównania poziomu hałasu emitowanego przez pojazdy z napędem...
-
Noise Generated by Tyres Designet for Electric Vehicles - Results of Laboratory Experiments
PublikacjaA few years ago, electric and hybrid vehicles were rarely seen on public roads and were considered more as exotic curiosities or even as a sign of extravagance than a practical means of transport. Nowadays the situation has changes significantly. This was caused both by the technical development and legislative actions, as well as the organizational nature promoting the purchace and use of low emission vehicles. Electric vehicles...
-
Reduction of noise and rolling resistance by horizontal grinding of asphalt pavements
PublikacjaGrinding of cement concrete pavements to reduce unevenness and noise is common since a long time. Grinding is then made with wheels equipped with diamond blades rotating in the vertical plane. This creates narrow vertical/longitudinal grooves in the pavement. It is not applied to asphalt pavements. In this paper an alternative type of grinding is studied. In this case plates with diamond heads rotate in the same plane as the pavement,...
-
Speed dependency of temperature effects on road traffic noise
PublikacjaRecently, a new literature review on the influence of temperature on tire/road noise became available, based on a compilation of large amounts of data from empirical research. This review showed that the effect of temperature is roughly double of that previously assumed and taken account of in international standards. This makes temperature one of the main sources of error in measurement results. Furthermore, it suggested that...
-
Temperature influence on tire/road noise evaluated by the drum method
PublikacjaAmbient air and road surface temperatures substantially affect the road vehicle noise emission. The temperature influence on tire/road noise depends mainly on tire-road combination. It is different for dense and porous pavements, for bituminous and cement ones. It differs also depending on tires. The correction procedures for temperature effect are still under consideration and preparation. Laboratory experiment was prepared to...
-
The effect of tire aging on acoustic performance of CPX reference tires
PublikacjaReduction of tire/road noise is one of the biggest environmental challenges of road traffic. To reduce that noise it is necessary to perform acoustic measurements on the base of wellproven standard procedures. One method of measurements that is in common use, namely the Close Proximity Method (CPX), is described in standard ISO-DIS 11819-2. As this method is used to classify road surfaces regarding their influence on vehicle noise,...
-
Tire camber angle influence on tire-pavement noise
PublikacjaTaking into account tire-pavement noise and tires classification with respect to noise emission special measurement methods are usually used. When two of them are applied (the Laboratory Drum Method (DR) and the Close-Proximity Method (CPX)) the investigator has to be sure that the position of the tire is correct. The authors of this paper thought about tire position as tire (wheel) alignment in particular tire camber angle. They...
-
Tyre/road noise of passenger car tyres, including tyres for electric vehicles - road measurements
PublikacjaThe paper presents the results from CPX measurements of tyre/road noise performed for selected passenger car tyres, including the tyres especially designed for electric vehicles. The tyres have been measured when rolling on several typical road surfaces in Norway and in Poland. In addition, the tyres have been measured on some very low noise road surfaces, such as a the poroelastic road surface (PERS). The measurement results...
Rok 2016
-
Improving the CPX method by specifying reference tyres and including corrections for rubber hardnes and temperature
PublikacjaRecently completed work in the EU project ROSANNE and in working group ISO/TC43/SC1/WG33 has allowed substantial improvements to measurements made by the Close-Proximity (CPX) method, intended for measurement of noise properties of road surfaces.The paper summarizes the experimental work and describes the conclusions and implementation in ISO/FDIS 11819-2 (CPX method) and in the supporting ISO (draft) Technical Specifications 11819-3...
-
Inhomogeneity of low-noise wearing courses evaluated by tire/road noise measurements using the close-proximity method
PublikacjaPerforming numerous analyses of tire/road noise measurements on low-noise pavements during the last several years, the authors observed significant inhomogeneity of the wearing course in numerous cases, while similar problems were almost non-existent when dense pavements were measured. Three main causes of low-noise pavement inhomogeneity can be defined. The first one is imperfections in the technology used for asphalt mix production...
-
Noise and Rolling Resistance Properties of Various Types of Winter Tyres Compared to Normal Car Tyres
PublikacjaTo cope with winter weather conditions, potentially including snow and ice, it is common to use winter tyres, or ”all-seasons” tyres assumed to be safe both in summer and winter. In some northern countries, winter tyres are mandatory. Traditionally, it has been assumed that winter tyres are noisier than normal tyres (here called summer tyres) and winter tyres equipped with studs are assumed to be very noisy.This paper presents...
-
Potential reduction of traffic noise by the means of increased fleet of electric vehicles using a combination of low-noise tyres and low-noise road surfaces
PublikacjaIn the future, the number of zero-emission vehicles like electric and plug-in hybrid vehicles (in electric mode) is expected to be a substantial part of the vehicle fleet. In Norway, such vehicles already account for approximately 20 % of all new cars sold. Since these vehicles emit negligible noise related to the power-train, the tyre/road noise is the dominating noise source. In the LEO project, tyres designed for such cars have...
-
ROSANNE Project: New Procedure for Noise Characterisation of Road Surfaces in Europe
PublikacjaROSANNE is a collaborative project in the 7th EU Framework Programme which aims at harmonising measurement methods for skid resistance, noise emission and rolling resistance of road pavements as a preparation for standardization. The project started in November 2013 and is developing and improving standards in the field of working group CEN/TC 227/WG 5. Regarding the influence of the pavement on the road traffic noise emission,...
-
Temperature influence on tyre/road noise frequency spectra
PublikacjaThe correction for temperature effect on measured tyre/road noise is very important as it may be one of the main sources of errors in measurement results due to substantial influence of this parameter on obtained values. The latest version of the Technical Specification ISO/CD TS 13471-1 about Temperature Corrections contains a proposal of correction procedure for normalizing measured noise levels to a reference air temperature...
Rok 2017
-
Degradation of reference tyres used for CPX measurements
PublikacjaMeasurements of tyre/road noise using the Close Proximity Method are based on reference tyres that are described in ISO/TS 11819-3. The standard specifies two tyres, namely "P1" and "H1" that should be used during measurements. To be used for measurements each tyre must fulfill certain conditions that are listed in the standard. The conditions are related to the tread pattern depth and rubber hardness. During experiments performed...
-
Pavement ageing influence on tyre/road noise
PublikacjaRoad surface should be constructed in a way that ensures safe and comfortable traffic conditions, not only when it is newly paved but also during its entire lifetime. An important factor in the asphalt mixture design process is also the expected pavement durability and stability of pavement properties over time. In many countries, road surface starts to play a significant role in traffic noise reduction actions. Selecting a particular...
-
Reduction of road traffic noise by source measures — present and future strategies
PublikacjaThe current trend worldwide is less focused on reducing road traffic noise. This is in strong contrast to the severe impact of traffic noise to the general health and quality of life. A more holistic and combined strategy is needed. Current international rules and regulations regarding vehicles and tyres are not sufficient to reduce traffic noise levels in an effective way. Calculations show that these regulations will only yield...
Rok 2018
-
Acoustic lifecycle study of the double-layer porous asphalt on E4 in Huskvarna, Sweden
PublikacjaIn 2010 a double-layer porous asphalt concrete (DPAC) pavement was constructed on the E4 motorway through the Swedish city Huskvarna. Earlier experience in Sweden indicated that it was feasible to obtain a high initial noise reduction but due to the widespread use of studded tires in winter, clogging and ravelling created losses of around 2 dB per year, with an expected acoustical lifetime of only 3 years. However, the improved...
-
An in-depth look at the tire rubber hardness influence on tire/road noise measurements
PublikacjaWhen assessing the acoustic quality of a road pavement with the close-proximity (CPX) or the on-board sound intensity (OBSI) method, the rubber hardness of the reference tire substantially affects the measurement. Practical experience shows that measurement tires can get significantly harder within a single measurement season. This is why one would like to normalize measurements to a reference rubber hardness. The recently published...
-
COMPARISON OF NOISE EMISSION OF HCT AND CLASSIC VEHICLE COMBINATIONS FOR TIMBER TRANSPORTATION IN SWEDEN
PublikacjaBy means of a special simulation tool, the noise emission of a high-capacity heavy vehicle (11 axles) was compared to that of a classic heavy vehicle (a truck-dolly-semitrailer with 8 axles). The two cases are designated “Extended vehicle” versus “Classic vehicle” in this study, having total lengths of 34 and 25 m, respectively. The Classic vehicle represents the most common articulated heavy vehicle configuration for transport...
-
Poroelastic Road Surface – a Promising Road Traffic Noise Abatement Solution
PublikacjaRoad surfaces have a direct impact on the generation of noise by rolling tyres, the main and dominant source of noise of moving vehicles, as well as may affect propagation of noise emitted by all noise sources of a vehicle. Thus there is no doubt that pavement should be considered as one of the major potential road traffic noise abatement measure. Low noise pavements of existing types may in new conditions provide up to 8 dB of...
-
Temperature influence on tyre/road noise on poroelastic road surface based on laboratory measurements
PublikacjaThe temperature effect on measured tyre/road noise is very important phenomena as it may lead to significant errors in measurement results due to substantial influence of this parameter on the obtained values. It depends mainly on the particular tyre-road combination. It is different for dense and porous as well as for bituminous and cement concrete pavements. It differs also depending on tested tyre. The correction procedure for...
-
TIRE/ROAD NOISE AND TIRE ROLLING RESISTANCE ON PROTOTYPE PERS SURFACE
PublikacjaPoroelastic road surfaces are characterized by low noise of tires running on them.Road pavements of this type are promising solution to problems related to traffic noise in cities and on rural roads. Some technical problems still have to be solved, in particular regarding durability and skid resistance on wet surface. Ongoing and planned works are to contribute to create a quiet, durable and safe road surface, which will become...
Rok 2019
-
Comparison of pavement noise properties on selected road sections using different CPX measuring systems: self-powered vehicle and special test trailer
PublikacjaThe recently published ISO standard intended to measure the noise properties of road surfaces in a standardized method (ISO 11819-2:2017) precisely defines measurement procedure of the influence of road surface on traffic noise. According to it, two types of test vehicles may be utilized: a self-powered vehicle fitted with one or more test tyres and a trailer towed by a separate vehicle with one or more test tyres mounted on the...
-
Further development of the poroelastic road surface within the new Polish project SEPOR
PublikacjaRoad surfaces have a direct impact on noise generated by rolling tyres, the main and dominant source of noise of moving vehicles. Road surface texture, porosity and stiffness/elasticity govern the pavement contribution to tyre/road noise the most. An experimental PoroElastic Road Surface (PERS) is a wearing course with a high content of interconnected voids (pores) and with an elastic behavior due to the use of small particles...
-
Pomiary skuteczności hamowania w stacjach kontroli pojazdów
PublikacjaPrzeprowadzono pomiary skuteczności hamowania w warunkach różnych stacji kontroli pojazdów. Celem przedsięwzięcia było porównanie wyników z uzyskanych pomiarów. Na tej podstawie pozyskano dane umożliwiające opracowanie założeń do koncepcji metodyki badań technicznych pojazdów zabytkowych w stacjach kontroli pojazdów.
Rok 2021
-
Investigation of Acoustic Properties of Poroelastic Asphalt Mixtures in Laboratory and Field Conditions
PublikacjaMeasures for the improvement of acoustic conditions in the vicinity of roads include the construction of pavement structures with low-noise surfaces with optimal macrotexture and the highest possible sound absorption coefficient. Laboratory evaluation of acoustic properties of a designed asphalt mixture before its placement in the pavement is a good solution. Currently, the most popular method for the determination of the sound...
Rok 2022
-
The EU Tyre Noise Label: The problem with measuring the noise level of only a few of all tyre variants
PublikacjaThe STEER project, described in another Inter-Noise 2022 paper, has evaluated the performance of the noise label of the European tyre label. The major finding was that uncertainties of the tyre/road noise measurements were higher than should be accepted. One of the worst uncertainty sources was found to be the common practice to measure only some tyres of all sizes or variants within a tyre line, to save money. Generally, only...
wyświetlono 1797 razy