Wyniki wyszukiwania dla: EXPERIMENTAL TESTS

• Experimental Research on Insufficient Water Lubrication of Marine Stern Tube Journal Bearing with Elastic Polymer Bush

  Publikacja

  • A. Barszczewska

  - Polish Maritime Research - Rok 2020

  Water-lubricated bearings with polymer bushes are steadily gaining popularity due to their advantages, including environmental friendliness, relatively simple construction and long-term operation. Nevertheless, in practice instances of damage to such bearings occur due to insufficient or absent flow of the lubricating agent. In this study, experimental tests established that elastic polymer bush bearing is capable of operating...

  Pełny tekst do pobrania w portalu

• Experimental and numerical evaluation of mechanical behaviour of composite structural insulated wall panels under edgewise compression

  Publikacja

  • Ł. Smakosz
  • I. Kreja

  - Rok 2016

  A composite structural insulated sandwich panel (CSIP) is a quite novel approach to the idea of sandwich structures. A series of natural-scale experimental test is required each time a change in panel’s geometry is planned and a reliable computational tool is required to precede actual laboratory testing with virtual simulations. An attempt of creating such a tool has been made with use of a commercial FEM code ABAQUS, in order...

• Shaking table experimental study on damage mechanism of the disconnecting switch under seismic excitation

  Publikacja

  • P. Dembowski
  • R. Jankowski

  - Key Engineering Materials - Rok 2011

  The efficiency of the energetic network is a very import safety issue in the region experienced by the earthquake. High voltage disconnecting switches are important elements of the energetic infrastructure used to separate electric circuits (i.e. during repairs), which should not be damaged remaining fully operational. The aim of the paper is to show the results of the shaking table experimental investigation focused on damage...

• Experimental study of the impact of notches and holes made in the front edge of adherends on the properties of static and fatigue strength of adhesive joints

  Publikacja

  • A. Kubit
  • W. Macek
  • W. Zielecki
  • P. Szawara
  • P. Myśliwiec

  - INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES - Rok 2024

  The paper presents the results of experimental studies aimed at determining the effect of holes and notches at the front edge of adherends on the strength of adhesive joints. Single-lap joints made of S235JR steel sheets joined with Araldite 2014-2 epoxy adhesive were tested. Comparative tests of static strength in the shear test as well as high-cycle fatigue strength tests were carried out. Joints with three holes with a diameter...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Water-lubricated stern tube bearing - experimental and theoretical investigations of thermal effects

  Publikacja

  • M. Wodtke
  • W. Litwin

  - TRIBOLOGY INTERNATIONAL - Rok 2021

  The paper presents research results of thermal phenomena accompanying operation of a water-lubricated stern tube bearing with axial grooves. Experimental tests revealed, that intensity of forced axial flow has strong influence on bush temperature. Numerical simulations focused on investigation of the thermal phenomena under operation of water-lubricated journal bearing showed, that restricted axial flow promotes backflow of the...

  Pełny tekst do pobrania w portalu

• An Experimental Investigation of Pressure Wave Celerity During the Transient Slurry Flow

  Publikacja

  • A. Kodura
  • M. Kubrak
  • P. Stefanek
  • K. Weinerowska-Bords

  - GeoPlanet: Earth and Planetary Sciences - Rok 2018

  Transportation of slurries in pressure pipelines is an example of a complex flow due to specific parameters of transported medium. For practitioners, the economy of designing and maintenance is usually the most important factor. For this reason, most of hydrotransport installations are fairly simple; however, they become more vulnerable to negative effects of the transient flow which can occur in pressure pipelines. As the consequence,...

  Pełny tekst do pobrania w serwisie zewnętrznym

• UPDRS tests for diagnosis of Parkinson's disease employing virtual-touchpad

  Publikacja

  • A. Kupryjanow
  • B. Kunka
  • B. Kostek

  - Rok 2010

  This paper presents a new approach to diagnosing Parkinson's disease. The progression of the disease can be measured by the UPDRS (Unified Parkinson Disease Rating Scale) scale which is used to evaluate motor and behavioral symptoms of Parkinson's disease. Hitherto the evaluation of the advancement of the disease in the UPDRS scale was made by a specialist through medical observation. The authors suggest a partial automation of...

• Classification of Music Genres by Means of Listening Tests and Decision Algorithms

  Publikacja

  • A. Dorochowicz
  • A. Majdańczuk
  • P. Hoffmann
  • B. Kostek

  - Rok 2018

  The paper compares the results of audio excerpt assignment to a music genre obtained in listening tests and classification by means of decision algorithms. A short review on music description employing music styles and genres is given. Then, assumptions of listening tests to be carried out along with an online survey for assigning audio samples to selected music genres are presented. A framework for music parametrization is created...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Numerical analysis and in situ tests of the Grot Rowecki Bridge in Warsaw

  Publikacja

  • M. Miśkiewicz
  • Ł. Pyrzowski
  • K. Wilde
  • J. Chróścielewski

  - Rok 2016

  The paper presents the FEM analysis of the reconstructed the Grot-Rowecki Bridge over Vistula river in Warsaw. The bridge has seven spans and consists of two independent structures with the longest spans of 120 m. After reconstruction the bridge is over 10 m wider. The numerical, nonlinear analysis has been con-ducted on a global and local FEM models. These models are defined so as they strictly comply with global structural bridge...

• Tests of soil-geotextile systems in changeable hydraulic head conditions.

  Publikacja

  • W. Sterpejkowicz-Wersocki
  • A. Bolt

  - Rok 2004

  Artykuł zawiera opis stanowiska badawczego i przeprowadzonych badań filtracji w układzie grunt-geowłóknina w kierunku normalnym do płaszczyzny geosyntetyku.

• Simulation Tests of the Passing Distance of Ships on a Two-Way Fairway

  Publikacja

  • S. Gucma
  • J. Artyszuk
  • R. Gralak
  • M. Przywarty

  - Applied Sciences-Basel - Rok 2023

  Pełny tekst do pobrania w serwisie zewnętrznym

• Determination of POPs in environmental matrices - proficiency tests for Polish laboratories

  Publikacja

  • P. Konieczka
  • T. P. Linsinger
  • J. Namieśnik

  - ACCREDITATION AND QUALITY ASSURANCE - Rok 2006

  Katedra Chemii Analitycznej Wydziału Chemicznego PG we współpracy ze Stowarzyszeniem RefMat oraz firmą LGC Promochem Sp. z o.o. prowadzi od 2003 roku wieloletni projekt badań biegłości laboratoriów. Celem badań jest określenie biegłości laboratoriów w zakresie oznaczania związków organicznych (anality z grupy PCB, WWA, pestycydy) w próbkach środowiskowych. W ramach projektu przeprowadzono dotychczas trzy badania biegłości dotyczące...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Determination of the shape of the CFGFT cylindrical column based on laboratory tests

  Publikacja

  • E. Mieloszyk
  • M. Abramski
  • A. Milewska

  - MEASUREMENT - Rok 2024

  Analyses were carried out on glass-fibre-reinforced polymer tube columns with reference to laboratory tests. The angles of the glass fibre beams were 20◦, 55◦ and 85◦. The study employed non-classical operational calculus. Various modulated harmonic signal shapes were considered for columns and tubes at buckling. The buckling loads were assessed and compared for different models.

  Pełny tekst do pobrania w portalu

• Rapid Influenza Diagnostic Tests - Indications, Clinical Implications and Usefulness

  Publikacja

  • E. Kuchar
  • D. Okrucinski
  • A. Nitsch-Osuch

  - Pediatric Oncall - Rok 2016

  Pełny tekst do pobrania w serwisie zewnętrznym

• Characterization of NiTi SMA in its unusual behaviour in wear tests

  Publikacja

  • N. Levintant-Zayonts
  • G. Starzynski
  • M. Kopec
  • S. Kucharski

  - Tribology International - Rok 2019

  Pełny tekst do pobrania w serwisie zewnętrznym

• Determination of POPs in environmental matrices – proficiency tests for Polish laboratories

  Publikacja

  • P. Konieczka
  • T. Linsinger
  • J. Namieśnik

  - ACCREDITATION AND QUALITY ASSURANCE - Rok 2006

  Pełny tekst do pobrania w serwisie zewnętrznym

• Modeling Reservoir Gas Permeability Tests for Cylindrical and Spherical Geometry

  Publikacja

  • M. Kaczmarek

  - TRANSPORT IN POROUS MEDIA - Rok 2010

  Pełny tekst do pobrania w serwisie zewnętrznym

• Measurement accuracy evaluation of transmission line earthings by impulse tests

  Publikacja

  • S. Wojtas
  • M. Wołoszyk
  • M. Galewski

  - Rok 2007

  Uziemienia słupów linii energetycznych powinny być sprawdzane okresowo. Pomiary rezystancji takich uziemień przy pomocy metody niskoczęstotliwościowej wymaga wyłaczania linii i odkręcania przewodów odprowadzających od konstrukcji słupa. Metoda udarowa jest znacznie łatwiejsza w tej aplikacji i nie wymaga wyłaczania linii na czas pomiarów. W pracy oszacowano wpływ uziemień sąsiednich słupów na dokładność pomiarów metodą udarową.

• Scale effect in shaft friction from direct shear tests

  Publikacja

  • L. Bałachowski

  - Archives of Civil and Mechanical Engineering - Rok 2006

  Przeanalizowano wartości maksymalne tarcia uzyskane w aparacie bezpośredniego ścinania w kontakcie konstrukcja-grunt dla piasków kwarcowych i węglanowych oraz gładkiego i szorstkiego kontaktu. Badania przeprowadzono przy regulowanej sztywności normalnej kontaktu, przy różnej składowej normalnej naprężenia w kontakcie i różnym zagęszczeniu gruntu. Określono efekt skali jako stosunek wartości tarcia mobilizowanego na modelu do tarcia...

  Pełny tekst do pobrania w portalu

• Fatigue life tests of steel laser-welded sandwich structures

  Publikacja

  • D. Boroński
  • J. Szala

  - Polish Maritime Research - Rok 2006

  W publikacji zaprezentowano rezultaty systematycznych badań trwałości zmęczeniowej elementarnych połączeń wykonanych techniką spawania laserowego dla różnych wariantów geometrii złącz. Pokazano uzyskane wyniki i ich aproksymację, porównano uzyskane rezultaty dla różnych geometrii.

  Pełny tekst do pobrania w portalu

• Tests of local strains in steel laser - welded sandwich structure

  Publikacja

  • D. Boroński
  • J. Szala

  - Polish Maritime Research - Rok 2006

  W publikacji zaprezentowano rezultaty badań odkształceń w strefie spoiny laserowej konstrukcji sandwich. Pokazano obiekt badań, metodykę i oprzyrządowanie oraz proces rejestracji. Przedstawiono uzyskane wyniki i wnioski z nich wypływające.

  Pełny tekst do pobrania w portalu

• Characteristics of tyre chips-sand mixtures from triaxial tests

  Publikacja

  • L. Bałachowski
  • P. Gotteland

  - Archives of Hydro-Engineering and Environmental Mechanics - Rok 2007

  Analiza parametrów wytrzymałościowych i odkształcalności mieszanek piasku i kawałków zużytych opon. Powtórne użycie tego materiału, odpowiednio przetworzonego na skrawki i elementy o kształcie kołowym pozwala po odpowiednim zmieszaniu z gruntem niespoistym na uzyskanie materiału o zwiększonej wytrzymałości na ścinanie zachowywanej również przy dużych odkształceniach. Analizowano mieszanki o różnej zawartości opon przy naprężeniach...

  Pełny tekst do pobrania w portalu

• Intercorrelation between CPTU-DMT tests for sands on the Baltic coast

  Publikacja

  • L. Bałachowski
  • P. Kozak
  • N. Kurek

  - Rok 2008

  Na podstawie badań terenowych opracowano szereg zależności między parametrami uzyskanymi z badania CPTU i DMT w czystych piaskach kwarcowych na Wybrzeżu Bałtyku. Uwzględniono wpływ historii geologicznej złoża oraz prekonsolidacji. Przedstawiono zależności dla piasków normalnie konsolidowanych i prekonsolidowanych. Prekonsolidacja i historia geologiczna bardziej wpływają na wyniki badania DMT niż CPTU. Zaproponowano oszacowanie...

• Compliance tests of the polymer layers used as hydrodynamic bearing coatings

  Publikacja

  • M. Wasilczuk
  • M. Wodtke

  - Rok 2015

  Operational experience and scientific investigations results showed that polymer lined hydrodynamic bearings can withstand more severe operating conditions compared than white metal bearings. PTFE and PEEK-based coatings are the most frequently used as Babbitt alternatives. Both polymers differ significantly from the each other in material properties. According to catalogue data compression modulus of PTFE, it is about an order...

• Mechanical properties of PVDF-coated fabric under tensile tests

  Publikacja

  • A. Ambroziak

  - JOURNAL OF POLYMER ENGINEERING - Rok 2015

  This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1...

  Pełny tekst do pobrania w serwisie zewnętrznym

• A role of destructive and non-destructive tests in creep damage Identification

  Publikacja

  • Z. Kowalewski
  • T. Szymczak
  • K. Makowska
  • B. Augustyniak

  - Key Engineering Materials - Rok 2012

  Przedstawiono wyniki badań mjących zilustrować i określić rolę badań niszczących i nieniszczących w identyfikowaniu degradacji po pełzaniu

• Shaft friction from the DMT and direct shear interface tests

  Publikacja

  • K. Mikina
  • J. Konkol
  • L. Bałachowski

  - Rok 2021

  The article presents preliminary attempt to create tri-linear transfer curves for describing pile behaviour under axial loading. Transfer curves would use the parameter measured in dilatometer test, particularly a constrained modulus MDMT. The proposed method is based on concrete rough and smooth interface tests performed in a direct shear apparatus. Based on the obtained mobilization curves, relationships were created between...

• The role of numerical tests in assessing road restraint system functionality

  Publikacja

  • M. Budzyński
  • K. Jamroz
  • K. Wilde
  • W. Witkowski
  • Ł. Jeliński
  • D. Bruski

  - European Transport Research Review - Rok 2020

  Key to understanding the needs and building road infrastructure management tools to prevent and mitigate run-off-road accidents is to identify hazards and their sources which are a result of wrong design, construction, and installation of road restraint systems. Building such tools requires advanced studies with field tests, simulations and models to demonstrate the effects of selected parameters on road user safety. The research...

  Pełny tekst do pobrania w portalu

• Importance of model tests in design and operation of watercraft for example CTO

  Publikacja

  • A. Królicka-Gałązka

  - Logistyka - Rok 2011

  Ship Hydromechanics Division is a specialized research and development department of Ship Design and Research Centre conducting tests and research in the field of hydromechanics, connected with design and operation of ships and other floating structures, in scope of: predictions, numerical analyses, designs of - hull shape optimized with respect to the ship’s functions with the application of modern design tools, screw propellers...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Methodology of estimating temperature measurement uncertainty in a system for endurance tests.

  Publikacja

  • A. Golijanek-Jędrzejczyk
  • A. Dzwonkowski
  • L. Rafiński

  - Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej - Rok 2017

  The team consisting of the article authors developed a non-invasive method and a system for measuring temperature during an endurance test. A thermocouple which provided the required accuracy of changes in temperature dynamics measurements was used for the purpose of the required research. The paper presents the methodology for estimating uncertainty of temperature measurement done with the presented system, using a method based...

  Pełny tekst do pobrania w portalu

• Load Tests of the Movable Footbridge Over the Port Canal in Ustka

  Publikacja

  • M. Miśkiewicz
  • Ł. Pyrzowski

  - Rok 2017

  The paper presents the acceptance tests carried out on the open footbridge over the port canal in the Port of Ustka. The steel footbridge construction is created by a single pylon to which a movable truss span is suspended with a theoretical span of 52.3 m. The studies about load test of the object included static and dynamic extortion and measurements. In static tests the ballast was of pallets with concrete blocks. Dynamic studies...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Statistical analysis of pressuremeter tests for the north transversal tunnel in Grenoble

  Publikacja

  • C. Chapeau
  • E. Dembicki
  • N. Kurek
  • G. Marbach
  • J. Monnet

  - Rok 2005

  Interpretacja wyników badań presjometrycznych metodą statystyczną. Wartości charakterystyczne. Zastosowano rozkłady normalny, log-normalny, wykładniczy, Weybulla, Gamma, Chiz, Studenta i Pareto. Określono zmienność parametrów geotechnicznych zastosowanych do projektu tunelu i współczynnika bezpieczeństwa w czasie drążenia tunelu.

• Experimental and Computational Analysis of the Ship Propeller in Open Water Conditions for Inclined Flow

  Publikacja

  • J. Felicjancik
  • P. Król
  • B. Tomasz

  - Rok 2016

  The paper presents the results of computational analyses simulating the open water tests of ship propeller in inclined flow. The results of computations are compared with the results of corresponding experimental analyses carried out in the towing tank of Ship Design and Research Centre (CTO S.A.). The object of the research was the model propeller identified as CP469. The aim of the study was to validate the results of numerical...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Validation Process for Computational Model of Full-Scale Segment for Design of Composite Footbridge

  Publikacja

  • T. Ferenc
  • T. Mikulski

  - Polish Maritime Research - Rok 2020

  Experimental tests and numerical simulations of a full-scale segment of a foot and cycle bridge made of polymer composites are presented in the paper. The analysed structure is made of sandwich panels, which consist of glass fibre reinforced polymer (GFRP) multi-layered laminate faces and a PET foam (obtained from recycling) core. The dimensions of the segment cross-section are the same as for the target footbridge; however, span...

  Pełny tekst do pobrania w portalu

• OPERATION OF TWO-SHAFT GAS TURBINE IN THE RANGE OF OPEN ANTI-SURGE VALVE

  Publikacja

  • M. Dzida
  • J. Frost

  - Polish Maritime Research - Rok 2017

  This paper presents experimental tests of full-scale two-shaft gas turbine in the range of open anti-surge valve (ASV). The tests were carried out in a laboratory gas- turbine test stand belonging to Department of Automation and Power Engineering , Faculty of Ocean Engineering and Ship Technology , Gdańsk University of Technology. The tests covered the start-up and low load operation of the turbine set in the range of open...

  Pełny tekst do pobrania w portalu

• Experimental and numerical studies on the mechanical response of a piezoelectric nanocomposite-based functionally graded materials

  Publikacja

  • M. Malikan
  • M. Rucka

  - Rok 2024

  This work presents an experimental study of piezoelectric structures reinforced by graphene platelets, based on the concept of the functionally graded materials (FGMs). The assumed model is a rectangular beam/plate and the composition is due to the Halpin-Tsai rule. The model is also simulated in the Abaqus software which is the first time that such a structure has been modelled in an FEM package. In addition, a mathematical model...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Methods of Determining Pressure Drop in Internal Channels of a Hydraulic Motor

  Publikacja

  • P. Śliwiński
  • P. Patrosz

  - ENERGIES - Rok 2021

  In this paper, new methods for determining the pressure drop in internal channels of a hydraulic motor are proposed and described. Mathematical models of pressure losses in internal channels have also been described. Experimental tests of the satellite motor were carried out according to one of the proposed methods. The tests were carried out for two liquids, i.e., water and mineral oil. Experimental studies have shown that at...

  Pełny tekst do pobrania w portalu

• EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF CONCRETE BEHAVIOUR AT MESO-LEVEL DURING QUASI-STATIC SPLITTING TENSION

  Publikacja

  • J. Suchorzewski
  • J. Tejchman

  - Rok 2017

  The paper describes experimental and numerical results of quasi-static splitting tensile tests on concrete specimens at meso-scale level. The loading strip was made of plywood or steel. Fracture in concrete was detected at the aggregate level by means of three non-destructive methods: 3D x-ray micro-computed tomography, 2D scanning electron microscope and manual 2D digital microscope. The discrete element method was used to directly...

  Pełny tekst do pobrania w portalu

• Numerical and experimental study on effect of boundary conditions during testing of stiffened plates subjected to compressive loads

  Publikacja

  • K. Wołoszyk
  • Y. Garbatov
  • J. Kowalski
  • L. Samson

  - ENGINEERING STRUCTURES - Rok 2021

  This study analyses the effect of boundary conditions during testing on the structural behaviour stiffened plates with different thicknesses subjected to compressive loads. The goal of the compressive tests is to analyse the ultimate strength of a stiffened plate. During the test, relevant physical quantities are measured and investigated. The supporting structure's behaviour is investigated by analysing the force-displacements...

  Pełny tekst do pobrania w portalu

• Experimental validation of the rolling resistance measurement method including updated draft standard

  Publikacja

  • F. Anfosso-Ledee
  • V. Cerezo
  • R. Karlsson
  • A. Bergiers
  • S. Dauvergne
  • J. Ejsmont
  • L. Goubert
  • H. Lesdos
  • J. Maeck
  • U. Sandberg... i 2 innych

  - Rok 2016

  The main objective of ROSANNE is the harmonisation and standardisation of the measurement of skid resistance, noise emission and rolling resistance of road pavements. Regarding rolling resistance characterisation, a draft for standardization of a harmonized procedure for classification of road surfaces across Europe has been prepared within WP3 (deliverable 3.5). The procedure deals with the direct measurement on real roads of...

• Experimental study on polymer mass used to repair damaged structures

  Publikacja

  • T. Falborski
  • R. Jankowski
  • A. Kwiecień

  - Key Engineering Materials - Rok 2011

  A new method of repairing damaged structures by injecting the cracks with specially designed polymer mass (flexible two-component grout based on polyurethane resin) has been recently proposed. The technique is mainly dedicated to damaged masonries, especially historical structures where minimum intervention is permitted. The cracks are filled with the special injection, forming the flexible joints bonding the disrupted structural...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Badania międzylaboratoryjne w chemii analitycznej. Interlaboratory tests in analytical chemistry.

  Publikacja

  • A. Naganowska
  • P. Konieczka
  • B. Zygmunt
  • J. Namieśnik

  - Rok 2004

  W pracy dokonano podziału dostępnych badań międzylaboratoryjnych w zależności od założonego celu badań. Przedstawiono i scharakteryzowano podstawowe typy programów badań międzylaboratoryjnych oraz aspekt ich organizacji. Omówiono również wykorzystanie badań biegłości/porównań międzylaboratoryjnych w procesach akredytacji i nadzoru laboratoriów oraz możliwy sposób obróbki danych nadesłanych przez uczestników badań.

• The Comparison of the Emissions from Light Duty Vehicle in On-road and NEDC Tests

  Publikacja

  • J. Merkisz
  • P. Fuc
  • P. Lijewski
  • P. Bielaczyc

  - Rok 2010

  Pełny tekst do pobrania w serwisie zewnętrznym

• Characterization of aggregate interlocking in hot mix asphalt by mechanistic performance tests

  Publikacja

  • P. Polaczyk
  • Y. Ma
  • R. Xiao
  • W. Hu
  • X. Jiang
  • B. Huang

  - Road Materials and Pavement Design - Rok 2021

  Pełny tekst do pobrania w serwisie zewnętrznym

• Application of the corrosion tester in corrosion tests using the acoustic emission method.

  Publikacja

  • K. Emilianowicz
  • M. Supernak
  • A. Ossowska

  - Polish Maritime Research - Rok 2022

  The article presents an innovative method of corrosion tests using the acoustic emission method and the corrosion tester. The problem of corrosion occurring in ballast tanks and tanks carrying petroleum products is discussed. The acoustic method is presented which, due to the use of a unique corrosion tester, is used to monitor the course of corrosion processes in steel. The principle of operation of the corrosion tester, its construction...

  Pełny tekst do pobrania w portalu

• Lamb Wave Based Structural Damage Detection Using Stationarity Tests

  Publikacja

  • P. Dao
  • W. Staszewski
  • P. B. Dao

  - Materials - Rok 2021

  Pełny tekst do pobrania w serwisie zewnętrznym

• Reliability of UAVs in Fire Services Operations. Tests and Measurements of Selected Parameters

  Publikacja

  • R. Fellner
  • M. Zawistowski
  • P. Sadowski

  - Rok 2021

  Pełny tekst do pobrania w serwisie zewnętrznym

• Analysis of Efficiency of Thermoelectric Personal Cooling System Based on Utility Tests

  Publikacja

  • A. Dąbrowska
  • M. Kobus
  • Ł. Starzak
  • B. Pękosławski

  - Materials - Rok 2022

  Pełny tekst do pobrania w serwisie zewnętrznym

• Deep Indentation Tests of Soft Materials Using Mobile and Stationary Devices

  Publikacja

  • J. Nowak
  • M. Kaczmarek

  - Materials - Rok 2024

  Pełny tekst do pobrania w serwisie zewnętrznym

• Estimation of hydromechanical parameters of limb lymphedematous tissue with the use of chamber tests

  Publikacja

  • M. Kaczmarek
  • J. Nowak
  • W. Olszewski
  • M. Zaleska

  - Acta of Bioengineering and Biomechanics - Rok 2021

  Pełny tekst do pobrania w serwisie zewnętrznym