Wyszukiwarka
Filtry
wszystkich: 259
wybranych: 239
Wyniki wyszukiwania dla: ASH
-
Cathodic Activation of Titania-Fly Ash Cenospheres for Efficient Electrochemical Hydrogen Production: A Proposed Solution to Treat Fly Ash Waste
PublikacjaFly ash (FA) is a waste product generated in huge amounts by coal-fired electric and steam-generating plants. As a result, the use of FA alone or in conjunction with other materials is an intriguing study topic worth exploring. Herein, we used FA waste in conjunction with titanium oxide (TiO2) to create (FA-TiO2) nanocomposites. For the first time, a cathodic polarization pre-treatment regime was applied to such nanocomposites...
-
The Effect of Fly Ash Microspheres on the Pore Structure of Concrete
PublikacjaThe fly ash microspheres (FAMs) formed during the mineral transformation stage in coal combustion are hollow spherical particles with a density less than water. This paper presents the results of X‐ray micro‐computed tomography and an automatic image analysis system of the porosity in the structure of hardened concrete with microspheres. Concrete mixtures with ordinary Portland cement and two substitution rates of cement by microspheres—5%...
-
Compressive Strength and Leaching Behavior of Mortars with Biomass Ash
Publikacja -
Air-sparged hydrocyclone (ASH) technology for cyanide recovery
PublikacjaPrzewoźną instalację wyposażoną w napowietrzane reaktory cyklonowe zbadano pod kątem przydatności w procesie ciągłego odpędzania i absorpcji HCN z kopalnianych wód procesowych. Zastosowanie reaktora cyklonowego pozwoliło na ponad 99% absorpcję HCN podczas jednego przejścia fazy gazowej przez reaktor. Natomiast uzyskana efektywność odpędzania HCN, zależna przede wszystkim od stałej Henry'ego, przekroczyła 40% dla jednego przejścia...
-
Modification of cement-ash composites with steel fibre addition
PublikacjaPraca zawiera wyniki badań kompozytów cementowo-popiołowych, w których popiół zastosowano jako częściowy zamiennik cementu. Do kompozytów dodano niewielkie ilości dwóch rodzajów włókien stalowych. Zbadano właściwości techniczne kompozytów. Wytrzymałości kompozytów cementowo-popiołowych z włóknami stalowymi w stosunku do wytrzymałości kompozytów bez włókien po wszystkich okresach wiązania i twardnienia były wyższe od kilku do kilkudziesięciu...
-
Air sparged hydrocyclone (ASH) technology for cyanide recovery
PublikacjaMobilna instalacja reaktora cyklonowego została przetestowana do procesu odzysku cyjanków ze ścieków pochodzących z obróbki złota. HCN był usuwany z fazy gazowej podczas pojedynczego 1-sekundowego cyklu z efektywnością ponad 99%.
-
"Ash" [æ] sound then and now: an overview of the current state of knowledge
PublikacjaThe objective of this article is to review the existing studies on the British Received Pronunciation “ash” [æ] sound, as well as its variations outside the United Kingdom. It starts with a short analysis of sociolinguistic aspects of the Received Pronunciation accent, then it points out the most conspicuous differences between the Received Pronunciation and General American vowel systems. Then, it presents the early beginnings...
-
Mechanical Properties of a Dike Formed from a Soil-ash Composite
PublikacjaThe paper presents the research results on application of composite soils for dike construction. The composite soil is produced by mixing bottom ash (by-product of energetics) with dredged material (sand) taken from the mouth of The Vistula river. The optimum composite for dike core was chosen with respect to mechanical parameters: high internal friction angle, good compaction and reduced hydraulic conductivity. The test dike was...
-
Geotechnical Aspects of Dike Construction Using Soil-Ash Composites
PublikacjaAn analysis of using of anthropogenic materials, mainly ashes from Coal Combustion Products (CCP), for dike construction is shown. Perspectives of anthropogenic materials application in geotechnical engineering and their advantages in sense of the carbon dioxide reduction are discussed. According to regulations of Kioto Protocol 2005 and EU agreement “Energy Roadmap 2050” recycled materials have higher usage priority than natural...
-
Ash from Poultry Manure Incineration as a Substitute for Phosphorus Fertiliser
Publikacja -
Potential of ASH technology for protection against chemical and biological attacks
PublikacjaTechnologia wykorzystująca reaktor cyklonowy dzięki dużej wydajności posiada szczególne predyspozycje do usuwania lub niszczenia składników broni chemicznej i biologicznej ze strumieni gazów o dużym natężeniu przepływu, pochodzących z systemów ogrzewania, wentylacji i klimatyzacji, bez powodowania znacznych spadków ciśnienia. Reaktor cyklonowy posiada znaczne mniejsze rozmiary, około 10% objętości tradycyjnych systemów oczyszczania...
-
MECHANICAL PROPERTIES OF BOTTOM ASH – DREDGED MATERIAL MIXTURES IN LABORATORY TESTS
PublikacjaBottom ash from EC Gdańsk and dredged material taken from the mouth of The Vistula were mixed to form an engineering material used for dike construction. Mixtures with different bottom ash content were tested in laboratory to determine its basic physical and mechanical properties. The optimum bottom ash–dredged material mixture, built in the corps of the test dike, contains 70% of ash. The optimum bottom ash content in the mixture...
-
Environmental aspects of coastal earth structures made of soil-ash composites
PublikacjaThis paper presents an innovative technology of building the coastal dams with the use of soil-ash composites. A natural- scale test stand and results of the performed environmental tests are presented ; they have been compared with standards for purity of soils and waters. Also, an analysis of the obtained results and discussion of trends and anomalies in the observations, are given.
-
PROPERTIES OF FIBER REINFORCED CEMENT COMPOSITES WITH CENOSPHERES FROM COAL ASH
Publikacja -
Air-sparged hydrocyclone (ASH) technology for separation and environmental clean-up
PublikacjaPrzedstawiono zastosowanie technologii wykorzystującej napowietrzany reaktor cyklonowy w oczyszczaniu środowiska. W pierwszych opracowaniach reaktora cyklonowego wykorzystano wkłady ze stali porowatej i polietylenu jako kontaktory fazy gazowej z ciekłą. Jako wynik badań nad rozwojem technologii wkłady porowate zostały zastąpione metalowymi siatkami, co wyeliminowało problem zatykania się elementów. Przeprowadzone badania laboratoryjne...
-
Separation of CO2 from flue gas in air-sparged hydrocyclone (ash) reactor
PublikacjaPrzedmiotem badań była absorpcja dwutlenku węgla w wodnym roztworze wodorotlenku sodu, z fazy gazowej w skali laboratoryjnej i technologicznej z wykorzystaniem reaktora typu ash. Natężenie przepływu powietrza wynosiło 900 dm3/min a wodnego roztworu NaOH 15 dm3/min w skali technologicznej. Zbadano stężenie CO2, pH w fazie ciekłej, wpływ natężenia przepływu fazy gazowej i fazy ciekłej na efektywność absorpcji
-
Effect of Particle Size of Fly Ash Microspheres (FAMs) on the Selected Properties of Concrete
PublikacjaThis paper presents the investigations of selected properties of concrete containing two fractions of fly ash microspheres (FAMs) with grain size up to 200 μm and up to 500 μm. Concrete mixtures with ordinary Portland cement and three substitution rates of cement by FAMs, 1.3%, 2.0%, and 2.6%, were investigated. For all concrete mixes, the constant water–binder ratio (w/b) equal to 0.50 was used. The research program included the...
-
Characterization of the Physical, Chemical, and Adsorption Properties of Coal-Fly-Ash–Hydroxyapatite Composites
Publikacja -
Distribution and concentration of heavy metals in ash during thermal process sewage sludge
PublikacjaKażdego roku na świecie, obserwuje się znaczący wzrost produkcji osadów ściekowych. Przykładowo w 2006 roku, w Polsce ich ilość osiągnęła 1 mln ton w przeliczeniu na sucha masę, w tym ok. połowa pochodziła z oczyszczalni komunalnych. Problem ich zagospodarowania stanowi przedmiot zainteresowania wielu instytucji zajmujących się ochroną środowiska, zarówno w Polsce, jak i na całym świecie. Ich dotychczasowe wykorzystania polegało...
-
Application of fly-ash in transport infrastructure projects on the basis of The North Bridge in Warsaw
PublikacjaW artykule przedstawiono różne możliwości stosowania ubocznych produktów spalania w budownictwie komunikacyjnym. Podzielono te możliwości w zależności od właściwości UPS. Duże możliwości stosowania UPS pokazano na przykładzie budowy nasypów przy moście północnym w Warszawie, gdzie UPS były wykorzystane jako:- popiół lotny krzemianowy, do budowy nasypów po wymieszaniu z piaskiem z refulatu- popiół lotny wapniowy, do osuszania gruntów,...
-
NEW EXPERIENCES IN DIKE CONSTRUCTION WITH SOIL-ASH COMPOSITESAND FINE-GRAINED DREDGED MATERIALS
PublikacjaThe supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction proper-ties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed mate-rials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dikecover materials resulting in economical, environmentally...
-
Foamed Polyurethane Composites With Different Types of Ash – Morphological, Mechanical and Thermal Behavior Assessments
Publikacjancorporation of two types of ash particles into flexible polyurethane foams has been investigated, wood ash from gasification process and fly ash resulting from coal burning in power plant. Samples were modified with 5, 10 and 15 wt% of fillers. Structure, mechanical and thermal properties of obtained foams were investigated. Incorporation of both types of ash particles resulted in materials showing...
-
Modification of microporous polyurethane elastomers with different types of ash—morphological, mechanical, and thermal studies
PublikacjaIncorporation of wood ash particles from wood gasification into microporous polyurethane elastomers has been investigated and compared to addition of commercially available microspheres resulting from coal burning. Samples were modified with 3 and 6 wt% of fillers. Structure, mechanical, and thermal properties of obtained elastomers were investigated. Incorporation of both types of ash particles decreased the density of polyurethanes...
-
Influence of Cement Replacement with Sewage Sludge Ash (SSA) on the Heat of Hydration of Cement Mortar
PublikacjaThe amount of fly ash from the incineration of sewage sludge is increasing all over the world, and its utilization is becoming a serious environmental problem. In the study, a type of sewage sludge ash (SSA) collected directly from the municipal sewage treatment plant was used. Five levels of cement replacement (2.5%, 5%, 7.5%, 10% and 20%) and unchanged water-to-binder (w/b) ratio (0.55) were used. The purpose of the study was...
-
Correlation between Compressive Strength and Heat of Hydration of Cement Mortars with Siliceous Fly Ash
PublikacjaThis paper presents the results of calorimetric and strength tests of mortars with ordinary Portland cement and two substitution rates (10 and 20%) of cement by siliceous fly ash. The prepared samples were cured under isothermal conditions at four different temperatures: 23, 33, 43 and 53 °C. Heat of hydration was measured using an isothermal calorimeter dedicated to monitor the hydration process of cementitious composites such...
-
Airstrip Ground Improvement Works by Blasting Charge Technique and Dredged-Ash Material Mixture
PublikacjaSoil improvement by blasting charge technique is known in geotechnics as one of the efficient and inexpensive method. It can be used in preparing of underground to found road construction and buildings as well. The technique proves usefulness especially when dynamic load is applied. It is because of non-stiff or rather resilient type soil after improvement. In noncohesive or organic soil, blasting charge...
-
Effect of slag coal ash and foamed glass on the mechanical properties of two-stage concrete
PublikacjaTwo-stage concrete (TSC) is known by various names such as colcrete, Polcrete, preplaced aggregate concrete and prepacked concrete. It is different from traditional concrete in two fundamental ways, namely method of construction and mix proportion. Two-stage concrete (TSC) is defined as firstly, coarse aggregates are placed into the formwork and grout is applied to fill in the between coarse aggregate particles voids. Secondly,...
-
Incorporation of engineered nanoparticles of biochar and fly ash against bacterial leaf spot of pepper
Publikacja -
Weathering Resistance of Waterborne Polyurethane Coatings Reinforced with Silica from Rice Husk Ash
Publikacja -
Morphochemical investigation on the enrichment and transformation of hazardous elements in ash from waste incineration plants
Publikacja -
The role of additives in improving the flammability and calorific value of leather shavings and the binding of chromium compounds in ash
PublikacjaLeather processing companies are struggling with the problem of increasing costs of post-production waste disposal. Therefore, the issue of thermal waste disposal at the plant and the use of generated heat in the production process is becoming more and more popular. Leather waste on its own does not allow for autothermal combustion despite the sufficient higher heating value (HHV). Therefore the Authors proposed to improve the...
-
Challenges and opportunities related to the use of sewage sludge ash in cement-based building materials – A review
PublikacjaDue to the increasingly demanding legal regulations, regarding both sewage sludge (SS) and solid residues obtained during its thermal utilization processes, new solutions to limit their negative impact on the environment are sought. One approach that eliminates the risk of sewage sludge ash (SSA) is its use in cement building materials. The article contains a detailed literature review regarding the use of SSA in mortars and concretes,...
-
A comparative study on geopolymers synthesized by different classes of fly ash after exposure to elevated temperatures
Publikacja -
CO2 capture enhancement by metal oxides impregnated coal fly ash: a breakthrough adsorption study
Publikacja -
Heavy Metals and Metalloids Leachability from Composite Ground Materials Peat – Fly Ash – Lime
Publikacja -
Palm Oil Fuel Ash-Based Eco-Efficient Concrete: A Critical Review of the Short-Term Properties
PublikacjaThe huge demand for concrete is predicted to upsurge due to rapid construction developments. Environmental worries regarding the large amounts of carbon dioxide emanations from cement production have resulted in new ideas to develop supplemental cementing materials, aiming to decrease the cement volume required for making concrete. Palm-oil-fuel-ash (POFA) is an industrial byproduct derived from palm oil waste’s incineration in...
-
Lightweight alkali-activated composites containing sintered fly ash aggregate and various amounts of silica aerogel
Publikacja -
Sustainable recovery of plant essential Nitrogen and Phosphorus from human urine using industrial coal fly ash
PublikacjaCoal-based thermal power plants play a pivotal role in meeting global energy demand. The amount of fly ash generated from these plants increases every year, and its successful use has posed a significant environmental risk in the last decade. In this study, coal fly ash was packed in a fixed-bed adsorption column to remove Urea–N from synthetic human urine. To assess the efficacy of fly ash in the removal of Nitrogen, various process...
-
Comparative Analysis of Laboratory-Made and Industrial-Made Sewage Sludge Ash: Implications for Effective Management Strategy Development
Publikacjafirst_pageDownload PDFsettingsOrder Article Reprints Open AccessArticle Comparative Analysis of Laboratory-Made and Industrial-Made Sewage Sludge Ash: Implications for Effective Management Strategy Development by Bartłomiej Michał Cieślik 1,*ORCID,Oskar Ronda 1ORCID,Elżbieta Grządka 2ORCID,Jolanta Orzeł 2 andJustyna Płotka-Wasylka 1 1 Department of Analytical Chemistry, Faculty of Chemistry, Gdańsk University of Technology, Gabriela...
-
Determination of metal content in sewage sludge and sewage sludge ash to find opportunities to use them in the construction industry
PublikacjaSewage sludge management is becoming an increasing problem in developed and developing countries. Due to their physicochemical properties (mainly high content of heavy metals) a safe method of utilization is sought. Considering environmental protection, energy recycling, reduction in use of the raw materials and the possibility of immobilization hazardous substances, the use of ashes in building materials becomes a very good way...
-
Predicting Performance of Lightweight Concrete with Granulated Expanded Glass and Ash Aggregate by Means of Using Artificial Neural Networks
PublikacjaLightweight concrete (LWC) is a group of cement composites of the defined physical, mechanical, and chemical performance. The methods of designing the composition of LWC with the assumed density and compressive strength are used most commonly. The purpose of using LWC is the reduction of the structure’s weight, as well as the reduction of thermal conductivity index. The highest possible strength, durability and low thermal conductivity...
-
Combustion characteristics and retention-emission of selenium during co-firing of torrefied biomass and its blends with high ash coal
Publikacja -
Water Needs of the Ash-Leaved Maple (Acer negundo L.) at the Period Over Three Years after Reclamation in Different Regions of Poland
Publikacja -
Evaluation of the potential of Microwave Plasma–Atomic Emission Spectrometry for trace elements leaching assessment from the concrete matrix with sewage sludge ash additives
PublikacjaThe management of ash generated during the thermal utilization of sewage sludge is a significant environmental problem requiring an effective technological solution. One alternative way to dispose of sewage sludge is to bind it in concrete as a substitute for part of the aggregate. The properties of the C-S-H phase enable effective immobilization of harmful substances that sewage sludge contains. The amount of individual compounds...
-
Synergistic effects of biochar and processed fly ash on bioavailability, transformation and accumulation of heavy metals by maize (Zea mays L.) in coal-mining contaminated soil
Publikacja -
The effect of thermal modification of ash wood on granularity and homogeneity of sawdust in the sawing process on a sash gang saw PRW 15-M in view of its technological usefulness
PublikacjaPrzedstawiono wyniki analiz granulometrycznych trocin, drewna jesionowego niemodyfikowanego (Fraxinus exelsior L.) i modyfikowanego termicznie, otrzymanych w procesie przecinania drewna na pilarce ramowej wielopiłowej PRW15-M. Przecinanie drewna prowadzono dla dwu prędkości posuwu 0,36 m·min-1 oraz 1,67 m·min-1. Ziarnistośćpowstających trocin dla drewna jesionowego modyfikowanego termicznie zawierała się w przedziale od 33,5 μm...
-
Silicatization of fly ashes a harmless way of the wastes utilization.
PublikacjaArtykuł przedstawia osiągnięcia w pracach nad wykorzystaniem popiołów lotnych do formowania nowego materiału budowlanego, nazwanego kompozytem krzemianowo-popiołowym. Przedstawiono charakterystykę fizyko-mechaniczną omawianego materiału.
-
Ammonia in Fly Ashes from Flue Gas Denitrification Process and its Impact on the Properties of Cement Composites
Publikacja -
Biomimetic torene shells
PublikacjaThe genome inside the eukaryotic cells is guarded by a unique shell structure, called the nuclear envelope (NE), made of lipid membranes. This structure has an ultra torus topology with thousands of torus-shaped holes that imparts the structure a high flexural stiffness. Inspired from this biological design, here we present a novel ‘‘torene’’ architecture to design lightweight shell structures with ultra-stiffness for engineering...
-
From ashes to porous hierarchical nanocarbon electrode: Upcycling secondary waste materials through self-catalytic chemical vapour deposition
PublikacjaMetal and metal oxide particles are abundant in various ash-based wastes. Utilizing these as catalyst sources for the fabrication of carbon nanomaterials could present a valuable approach to reduce our reliance on non-renewable and costly catalyst sources, thereby facilitating large-scale nanomaterial production. In this context, secondary waste materials (SWMs) are by-products resulting from the (complete or partial) combustion...