Wyszukiwarka
Wyniki wyszukiwania dla: high-speed hot pressing
-
Improvement of microstructure and mechanical properties of high dense sic ceramics manufactured by high-speed hot pressing
PublikacjaNon-oxide ceramics possess high physical-mechanical properties, corrosion and radiation resistance, which can be used as a protective materials for radioactive wastes disposal. The aim of the present study was the manufacturing of high density SiC ceramics with advanced physical and mechanical parameters. The high performance on the properties of produced ceramics was determined by the dense and monolithic structure. The densified...
-
A Quantitative Investigation of Dislocation Density in an Al Matrix Composite Produced by a Combination of Micro-/Macro-Rolling
PublikacjaAn aluminum matrix composite with dispersed carbon nanotubes (CNTs) was produced via flake powder metallurgy using a micro-rolling process and vacuum hot pressing (VHP), followed by conventional rolling using a macro-rolling process. The microstructure and mechanical properties of the produced composites were studied. In addition, a new quantitative model was introduced to study the dislocation density based on the microstructural...
-
Characterization of Bi6Fe2Ti3O18 Ceramics with Impedance Spectroscopy
PublikacjaIn the present research the tool of impedance spectroscopy was utilized to characterize dielectric behavior of Aurivillius-type ceramics of Bi6Fe2Ti3O18 composition fabricated by hot pressing method from the stoichiometric mixture of oxides Bi2O3, TiO2 and Fe2O3. Impedance spectroscopy was applied to characterize dielectric response of bulk, grain boundary, and material/electrode interfaces of the fabricated polycrystalline ceramic...
-
Bio-Based Polyurethane Networks Derived from Liquefied Sawdust
PublikacjaThe utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated. The liquefaction process was carried...
-
Enhanced Mechanical and Electromechanical Properties of Compositionally Complex Zirconia Zr1–x(Gd1/5Pr1/5Nd1/5Sm1/5Y1/5)xO2−δ Ceramics
PublikacjaCompositionally complex oxides (CCOs) or high-entropy oxides (HEOs) are new multi-element oxides with unexplored physical and functional properties. In this work, we report fluorite structure derived compositionally complex zirconia with composition Zr1- x(Gd1/5Pr1/5Nd1/5Sm1/5Y1/5)xO2-δ (x = 0.1 and 0.2) synthesized in solid-state reaction route and sintered via hot pressing at 1350 °C. We explore the evolution of these oxides'...
-
Fabrication of Bi6Fe2Ti3O18 Ceramics by Mixed Oxide Method
PublikacjaIn the present study Bi6Fe2Ti3O18 (BFTO) ceramics has been fabricated by solid state reaction from the mixture of simple oxides viz. Bi2O3, TiO2 and Fe2O3. Stoichiometric mixture of the powders was thermally analyzed so parameters of the thermal treatment were determined. The EDS measurements have shown conservation of the chemical composition of the ceramic powder after calcination. Hot-pressing method was used for final densification...
-
Bio-Based Polyurethane Composites and Hybrid Composites Containing a New Type of Bio-Polyol and Addition of Natural and Synthetic Fibers
PublikacjaThis article describes how new bio-based polyol during the liquefaction process can be obtained. Selected polyol was tested in the production of polyurethane resins. Moreover, this research describes the process of manufacturing polyurethane materials and the impact of two different types of fibers—synthetic and natural (glass and sisal fibers)—on the properties of composites. The best properties were achieved at a reaction temperature...
-
Failure analysis of a high-speed induction machine driven by a SiC-inverter and operating on a common shaft with a high-speed generator
PublikacjaDue to ongoing research work, a prototype test rig for testing high-speed motors/generators has been developed. Its design is quite unique as the two high- speed machines share a single shaft with no support bearings between them. A very high maximum operating speed, up to 80,000 rpm, was required. Because of the need to minimise vibration during operation at very high rotational speeds, rolling bearings were used. To eliminate...
-
JOURNAL OF HIGH SPEED NETWORKS
Czasopisma -
Kinetic analysis of the stage for a high speed steam turbine
PublikacjaThis article analyzes possibilites of resonances within a control stage for a high speed steam turbine. This stage hase been based on assembling of a single blade to a rotating disk and increasing of rigidity of the system by using of a bandage. In the analysis will be nd a possiblity of resonance frequency, and mistuning by showing safety working ranges. The calculations have bean used the3D modal and harmonic analysis by the...
-
Induction motor control application in high-speed train electric drive
PublikacjaThe chapter presents an application of induction motor mechanical speed and load torque observers in high-speed train drives. The observers are applied for a 1.2-MW electric drive with an induction motor. The goal of using such observers is to utilize computed variables for diagnostic purposes of speed sensors and torque transmission system. The concept of diagnostic system is presented in this paper, and proper criteria are proposed....
-
Errors of a Linear Current Approximation in High-Speed PMSM Drives
PublikacjaCurrent sampling techniques and predictive algorithms used in the digital control of electric drives rely on a simple mathematical model that assumes linear current changes upon constant supplying voltages. This paper identifies rotor movement as a factor that makes this assumption invalid when the rotor covers an angular distance of a few tens of degrees during the control interval duration. The errors of the linear current approximation...
-
A New Coupler Concept for Contactless High-Speed Data Transmission Monitoring
PublikacjaThis paper presents a new concept of a couplerthat can be applied to high-speed data transmission contactlessmeasurements. The proposed approach is dedicated for differentialsignal transmission monitoring in microstrip coupled lineson printed circuit boards (PCBs). The coupler, produced on aseparate PCB, is overlayed on the transmission line with thedifferential signal and delivers decoupled differential signal tothe main measurement...
-
Measurements of High-Speed Data Transmission Radio Link for Special Applications
PublikacjaIn the article measurements of high-speed data transmission radio link for special applications were presented. Build measurement stand, measurement scenario and obtained results were briefly described. All conducted research work took place in real maritime environment.
-
DYNAMIC ANALYSIS OF THE RAILWAY BRIDGES IN POLAND WITH REGARDS TO HIGH-SPEED TRAINS PASSAGE ADJUSTMENT
PublikacjaThe dynamic analysis of the railway bridge in Tczew was carried out in the article as an example of such bridges adaptation suitability to handle high-speed trains. Calculations of railway bridges are greatly complicated and labor-consuming. The bridge model and a rolling stock passage simulation were developed in the SOFISTIK software. Three types of elements were used for the correct mapping of the structure in the calculation...
-
ANALYSIS OF THE POSSIBILITIES OF HIGH SPEED SHAFT BEARING SYSTEM DURABILITY INCREASE
PublikacjaDuring the operation of wind turbines with a gearbox of traditional configuration, a high failure rate of high-speed shaft bearings is observed. Such a high failures frequency is not reflected in standard bearing durability calculation methods, which can be attributed to atypical failure mechanism. To avoid observed problems in the 1.5 MW wind turbine, the modification of the existing bearing system is proposed. Multiple options,...
-
Effect of Pendolino high-speed rail on the structure of buildings located the proximity of the railway tracks
PublikacjaThe following research focuses on the dynamic analysis of the impact of the high-speed train inducted vibrations on the structures located near railway tracks. The office complex chosen as the subject of calculations is located in the northern part of Poland, in Gdańsk, in the proximity of Pendolino, the high speed train route. The high speed trains are the response for the growing needs for more efficient railway system. However...
-
High-Speed Serial Embedded Deterministic Test for System-on-Chip Designs
PublikacjaThe paper presents a high-speed serial interface between external tester and Embedded Deterministic Test (EDT) compression logic hosted by SoC designs. With only a single bidirectional link, the system is capable of feeding distributed heterogeneous cores with hundreds of test channels. Moreover, it synergistically supports EDT bandwidth management to improve the overall test performance. A detailed study indicates a high potential...
-
The contactless method of chip-to-chip high-speed data transmission monitoring
PublikacjaThis paper presents a technique of decoupling differential signals transmitted in a pair of microstrip lines on a printed circuit board (PCB), using dedicated coupler for high speed data transmission monitoring in chip-to-chip interconnections. The coupler used for signal probing is overlayed on the pair of microstrip lines under test, and provides a signal to the next blocks of the measurement system without disturbing transmission...
-
Analysis of Failures of High Speed Shaft Bearing System in a Wind Turbine
PublikacjaDuring the operation of wind turbines with gearbox of traditional configuration, consisting of one planetary stage and two helical stages high failure rate of high speed shaft bearings is observed. Such a high failures frequency is not reflected in the results of standard calculations of bearing durability. Most probably it can be attributed to atypical failure mechanism. The authors studied problems in 1.5 MW wind turbines of...
-
Digitalization of High Speed Craft Design and Operation Challenges and Opportunities
PublikacjaIn recent years, global demands for safe and sustainable ships led to dramatic changes in the maritime industry. Digitalization is expected to play an important part in the future. This is supported by analysis of the autonomous ships market which shows that digitalization of large ship types such as tankers and container ships is well on track. Although to date designs of autonomous High-Speed Craft (HSC) have been developed,...
-
International Journal of High Speed Electronics and Systems
Czasopisma -
The spindle speed control for high speed milling vibration surveillance
PublikacjaW pracy przedstawiono zmodyfikowaną metodę nadzorowania drgań za pomocą sterowania optymalno-liniowego prędkością obrotową wrzeciona. Zamieszczono opis dynamiki skrawania, niestacjonarnego modelu obliczeniowego oraz metody nadzorowania drgań. Wykorzystano model modalny wirującego narzędzia, którego parametry wyznaczono zarówno metodami symulacji komputerowych, jak i - za pomocą eksperymentalnej analizy modalnej. Zamieszczono przykład...
-
Impact of digital signal processing on FOC current feedback in high-speed PMSM drive
PublikacjaIn applications where size and weight of the electric motor are among major design concerns, Permanent Magnet Synchronous Motors (PMSMs) with wide operational speed-range are commonly preferred. Due to limited inverter switching frequency, high-speed operation of a drive results in a low ratio between the switching frequency and the fundamental frequency of motor voltage. Such operating conditions have been recently identified...
-
Michał Michna dr hab. inż.
OsobyJest absolwentem Wydziału Elektrycznego Politechniki Gdańskiej (1998). W 2004 r. uzyskał stopień doktora. Od 2004 r. zatrudniony w Katedrze Energoelektroniki i Maszyn Elektrycznych Politechniki Gdańskiej (asystent, adiunkt, starszy wykładowca). W latach 2010-2015 zastępca kierownik katedry. Jego zainteresowania naukowe i dydaktyczne obejmują szerokie spektrum zagadnień związanych z projektowanie, modelowanie i diagnostyką maszyn...
-
Integrated Control in High-Speed Networks Using Constrained Model Predictive Control
PublikacjaThis paper studies congestion control in high-speed communication networks using Model Predictive Control (MPC). Network traffic is assumed to consist of best-effort and priority traffic sources. An integrated controller consisting of two control parts is designed. The controller calculates the capacity for priority sources and the input rate of best-effort sources. MPC is desirable as it can take into account the constraints on...
-
Research and analysis of high-speed data transmission radio link designed for maritime environment
PublikacjaIn these article the realization of digital radio link for high-speed data transmission was presented. Its concept and practical realization, using USRP devices from National Instruments, were described. Developed software for generation and reception of digital signals in baseband, including description of modulation types, and time and frequency synchronization mechanisms, was presented. Moreover, an operation of designed radio...
-
Research and Analysis of High-Speed Data Transmission Radio Link Designed for Maritime Environment
PublikacjaIn these article, the realization of digital radio link for high-speed data transmission was presented. Its concept and practical realization, using USRP devices from National Instruments, were described. Developed software for generation and reception of digital signals in baseband, including description of modulation types, and time and frequency synchronization mechanisms, was presented. Moreover, an operation of designed radio...
-
Vibration surveillance of high speed ball end milling by the spindle speed control
PublikacjaPrzedstawiono zmodyfikowaną metodę nadzorowania drgań smukłych wirujących narzedzi skrawających za pomocą sterowania optymalno-liniowego prędkością obrotową wrzeciona. Podano opis dynamiki skrawania, niestacjonarnego modelu obliczeniowego oraz zmodyfikowanej metody nadzorowania drgań. Modyfikacja polega na tym, że do symulacji procesu nadzorowania wykorzystano model modalny freza, zaś parametry tego modelu wyznaczono albo numerycznie,...
-
Speed and load torque observer application in high-speed train electric drive
PublikacjaW artykule przedstawiono zastosowanie diagnostyczne obserwatorów prędkości obrotowej i momentu obciążenia w układzie napędowym z silnikiem asynchronicznym. System diagnostyczny jest dedykowany do napędu pociągu szybkiego. Celem diagnostycznym jest monitorowanie stanu czujnika prędkości obrotowej wału silnika oraz układu przeniesienia momentu trakcyjnego. Analiza sygnałów obliczanych w obserwatorach stanu pozwala na wykrycie uszkodzeń...
-
Implementation of high-speed data transmission technological demonstrator using software defined radio technology
PublikacjaIn the article implementation of high-speed data transmission technological demonstrator using software defined radio technology is presented. A system architecture design including asymmetric framing transmission organization, which differs from the ones used in cellular systems is described. The construction of technological demonstrator consisting of management unit, radio unit and programmable multithreaded software performing...
-
Implementation of high-speed data transmission technological demonstrator using software defined radio technology
PublikacjaIn the article implementation of a high-speed data transmission technological demonstrator using software defined radio technology is presented. A system architecture design including asymmetric framing transmission organization, which differs from the ones used in cellular systems is described. The construction of technological demonstrator consisting of a management unit, radio unit and programmable multi-threaded software performing...
-
High-speed memoryless binary/residue converter
PublikacjaW pracy zaprezentowano nowy szybki konwerter z systemu binarnego do systemu resztowego dla liczb o zakresie do 60 bitów. W konwerterze stosowane są wyłącznie układy kombinacyjne. Algorytm konwertera oparty jest na dodawaniu niezerowych cyfr binarnych reprezentacji kolejnych potęg 2 modulo m. Dodawanie jest realizowane przy użyciu wielooperandowego sumatora CSA oraz sumatora CPA. Suma wyjściowa CPA jest redukowana do zakresu 2m-1...
-
Digital structures for high-speed signal processing
PublikacjaThe work covers several issues of realization of digital structures for pipelined processing of real and complex signals with the use of binary arithmetic and residue arithmetic. Basic rules of performing operations in residue arithmetic are presented along with selected residue number systems for processing of complex signals and computation of convolution. Subsequently, methods of conversion of numbers from weighted systems to...
-
Application of speed and load torque observers in high-speed train drive for diagnostic purposes
PublikacjaW artykule przedstawiono zastosowanie diagnostyczne obserwatorów prędkości obrotowej i momentu obciążenia w układzie napędowym z silnikiem asynchronicznym. System diagnostyczny jest dedykowany do napędu pociągu szybkiego. Celem diagnostycznym jest monitorowanie stanu czujnika prędkości obrotowej wału silnika oraz układu przeniesienia momentu trakcyjnego. Analiza sygnałów obliczanych w obserwatorach stanu pozwala na wykrycie uszkodzeń...
-
Simulation and experiments of high speed milling vibration surveillence with a use of changing spindle speed
PublikacjaPraca poświęcona jest nowemu podejściu do nadzorowania drgań wirujących narzędzi w nowoczesnych frezarkach. Przeprowadzono analizy dynamiczne skrawania smukłym frezem kulistym. Opisano dynamikę sterowanego układu nistacjonarnego. Jako rezultat sterowania optymalno-liniowego otrzymano program chwilowych zmian prędkości obrotowej pozwalający uzyskać redukację drgań. Metodę zweryfikowano eksperymentalnie na frezarce Alcera Gambin...
-
Towards simulations and experiments of high speed milling vibration surveillance by the spindle speed control
PublikacjaPraca poświęcona jest nowemu podejściu do nadzorowania drgań wirujących narzędzi we współczesnych frezarkach. Przeprowadzono analizę skrawania smukłym frezem kulistym. Jako rezultat sterowania optymlano-liniowego otrzymano program chwilowych zmian prędkości obrotowej pozwalający uzyskać redukację drgań. Metodę zweryfikowano eksperymentalnie.
-
High-Speed Binary-to-Residue Converter Design Using 2-Bit Segmentation of the Input Word
PublikacjaIn this paper a new approach to the design of the high-speed binary-to-residue converter is proposed that allows the attaining of high pipelining rates by eliminating memories used in modulo m generators. The converter algorithm uses segmentation of the input binary word into 2-bit segments. The use and effects of the input word segmentation for the synthesis of converters for five-bit moduli are presented. For the number represented...
-
Study of prototype multi-pole non-salient field winding for high speed brushless synchronous generator
PublikacjaIn this paper a non-salient field winding for a brushless synchronous generator working with high speed in an autonomous energy generation system (e.g. airplane power grid) has been presented. A conception of a six-pole cylindrical-rotor with distributed field winding has been proposed. Comparison study of salient and prototype non-salient field winding has been carried out. Chosen simulation and measurement results of the generator...
-
High Speed Milling vibration surveillance with optimal spindle speed based on optimal speeds map
PublikacjaThe paper presents the method of the surveillance of the self-excited chatter vibration. At first, the workpiece modal parameters are estimated based on experimental data which leads to verification of computational model. Then, for selected surface points optimal spindle speeds are calculated. By considering sufficient amount of points it is possible to build a map of optimal spindle speeds. Experimental results show that this...
-
A New Approach For High Speed Data Transmission Monitoring
PublikacjaW artykule przedstawiono nowatorski sposób monitorowania szybkiej transmisji danych. Technika została zaprezentowana dla przypadku transmisji różnicowej na płycie drukowanej. Cechą szczególną rozwiązania jest możliwość pomiaru jakości transmisji w linii bez konieczności montowania dedykowanych złącz pomiarowych, które mogłyby degradować transmisję.
-
FPGA realization of the high-speed binary-to-residue converter
Publikacjaprzedstawiono architekturę i realizację w technologii fpga konwertera z systemu binarnego do systemu resztowego. algorytm konwertera oparty jest na podziale słowa wejściowego na segmenty 4-bitowe i następnie obliczeniu reszty liczby reprezentowanej przez dany segment, sumowaniu binarnym przy zastosowaniu csa i redukcji modulo w układzie dwuoperandowego sumatora modulo.
-
High-speed fpga pipelined binary-to-residue converter
Publikacjaw pracy przedstawiono architekturę przepływowego konwertera z systemu z uzupełnieniem do 2 z systemu binarnego. zastosowano segmentację słowa wejściowego ze wstępną inwersją dla liczb ujemnych. reszty liczb reprezentowanych przez poszczególne segmenty są obliczane poprzez odczyt z pamięci adresowanej binarną reprezentacją segmentu. otrzymane reszty sumowane są w wielooperandowym sumatorze modulo z korekcją reszty dla liczb ujemnych.pracę...
-
High-speed binary-to-residue converter with improved architecture.
PublikacjaPrzedstawiono ulepszoną architekturę szybkiego konwertera liczb z systemu binarnego do systemu resztowego dla liczb ze znakiem w kodzie U2. Algorytm konwertera oparty jest o segmentację słowa wejsciowego nasegmenty 4-bitowe. Reszty liczb reprezentowanych przez segmenty sąobliczane poprzez odwzorowanie. Wielooperandowe sumowanie modulo jest realizowane przy użyciu drzewa Wallace'a z segmentacją wektorów wyjściowych oraz finalnego...
-
Modeling the impact of discretizing rotor angular position on computation of field-oriented current components in high speed electric drives
PublikacjaModern drives consist of alternating current electric motors, and the field-oriented control (FOC) of such motors enables fast, precise, and robust regulation of a drive's mechanical variables such as torque, speed, and position. The control algorithm, implemented in a microprocessor, requires feedback from motor currents, and the quality of this feedback is essential to a drive's control properties. Motor phase currents are sampled...
-
Modeling the impact of rotor movement on non-linearity of motor currents waveforms in high-speed PMSM drives
PublikacjaMotor current measurement techniques as well as predictive control algorithms for electric drives rely on an assumption of linear motor currents changes resulting from constant inverter output voltages. Recent research has reported that this assumption does not hold in motors with short electrical time constant, and in drives whose rotor position advances substantially during a control period. This paper proposes a simulation model...
-
Sensorless control of high speed permanent-magnet synchronous motor
PublikacjaW artykule przedstawiono metodę bezczujnikowego sterowania szybkoobrotowym silnikiem z magnesami trwałymi. Pokazano działanie układu sterowania opartego na filtrze kalmana (EKF) jako obserwatora prędkości obrotowej.
-
High-speed binary-to-residue converter with the reduced input layer
Publikacjaprzedstawiono architekturę szybkiego konwertera z systemu binarnego do systemu resztowego dla modułów 5-bitowych. Algorytm konwersji oparty jest na dodawaniu binarnym reszt potęg liczby 2 obliczonych modulo m i redukcji modulo m sumy dla poszczególnych modułów bazy systemu resztowego. Warstwa wejciowa konwertera jest redukowana poprzez wykorzystanie wspólnych elementów układu dla odpowiednio zestawionych par modułów.
-
High-speed residue-to-binary converter based on the Chinese RemainderTheorem.
PublikacjaPrzedstawiono szybki konwerter z systemu resztowego do systemu binarnego dla modułów 5-bitowych oparty o chińskie twierdzenie o resztach. Projekcje ortogonalne są generowane przy użyciu odwzorowania realizowanego przy zastosowaniu funkcji logicznych pięciu zmiennych. Wartość wyjściowa jest obliczana przy użyciu drzewaWallace'a z segmentacją wektorów wyjściowych i redukcją do 2M, M zakres liczbowy systemu oraz efektywny finalny...
-
Sensorless Startup of Super High Speed Permanent Magnet Motor
PublikacjaCelem artykułu jest przedstawienie metody bezczujnikowego rozruchu wysokoobrotowego silnika z magnesami trwałymi. Zastosowano dwa typy metod sterowania. W pierwszej fazie rozruchu zastosowano metodę sterowania prądem, następnie przełączono do trybu sterowania wektorowego. Przy sterowaniu wektorowym zostały użyte: rozszerzony filtr Kalmana (EKF) oraz alternatywny Bezśladowy Filtr Kalmana (UKF) jako obserwatory prędkości obrotowej....