Wyszukiwarka
Wyniki wyszukiwania dla: ORGANIC METALS
-
Do You Know What You Drink? Comparative Research on the Contents of Radioisotopes and Heavy Metals in Different Types of Tea from Various Parts of the World
PublikacjaThe aim of this study was to assess the potential health risks of radioactive elements and heavy metals ingested through the consumption of various types of tea imported to the Polish market (black, green, red, oolong and white). The concentrations [Bq/kg] of radionuclides (40K, 137Cs, 226Ra, 210Pb and 228Th) in tea leaves before and after brewing were measured using γ-ray spectrometry with high-purity germanium (HPGe). The concentrations...
-
Low-cost Adsorbents Derived from Agricultural By-products/Wastes for Enhancing Contaminant Uptakes from Wastewater: A Review
PublikacjaA major threat to the comfort of human life has been imposed by increased industrialization and urbanization. The generation and disposal of huge amounts of toxic materials and pollutants have heavily contaminated our environment. Some Organics such as synthetic dyes (SD) and heavy metals (HM) are becoming increasingly prevalent as the most dangerous pollutants in soil and surface water environments. They are...
-
Alkanethiolates of Group 1,2, and 13-15 Metals
PublikacjaThis manuscript is an update to the earlier Science of Synthesis contribution describing methods for the synthesis of alkanethiolates of group 1, 2, and 13-15 metals. Alkanethiolates can be converted into S-alkyl thiocarboxylic acid esters, 1-thioglycosides, S-alkyl thiosulfinates, tetrahydro-1,4-thiazine-3-ones, sulfides, disulfides, sulfonium salts, dithioacetals and dithioketals, etc. These transformations are accomplished by...
-
Review of cigars and cigar-type products as potential sources of consumer exposure to heavy metals
PublikacjaThe popularity of cigars, growing since 1993, has not gone hand in hand with the increased interest of researchers in these products. Although the literature widely describes the harmfulness of tobacco and the content of toxic substances in tobacco products, the topic is often treated selectively as relating primarily to cigarettes and rarely extends to other products of the broadly defined tobacco industry. However, there is no...
-
Investigation on environmental chemistry changes in the Antarctic Special Management Area (ASMA 1): King George Island, South Shetlands Islands
PublikacjaThe doctoral dissertation included a review of the scientific literature that resulted in the selection of the research area, type of samples and chemical species that were marked. The published series of articles contains an in-depth description of the results of chemical analyses of surface water, sediment and snow samples from the Antarctic Specially Managed Area (ASMA 1) – King George Island. In addition, studies have been...
-
Enhanced photocatalytic, electrochemical and photoelectrochemical properties of TiO2 nanotubes arrays modified with Cu, AgCu and Bi nanoparticles obtained via radiolytic reduction
PublikacjaTiO2 nanotubes arrays (NTs), obtained via electrochemical anodization of Ti foil, were modified with monometallic (Cu, Bi) and bimetallic (AgCu) nanoparticles. Different amounts of metals’ precursors were deposited on the surface of NTs by the spin-coating technique, and the reduction of metals was performed via gamma radiolysis. Surface modification of titania was studied by EDS and XPS analysis. The results show that AgCu nanoparticles...
-
Bonding in Phosphanylphosphinidene Complexes of Transition Metals and their Correlation with Structures, 31 P NMR Spectra, and Reactivities
PublikacjaTheoretical studies of the bonding interactions and most important properties are carried out for isolable phosphanylphosphinidene complexes of transition metals. Three main types of phosphanylphosphinidene complexes are distinguished, based on the way in which the phosphanylphosphinidene ligand bonds to the metal center: (i) side-on complexes of platinum, where the R2Pβ–Pα ligand mimics structural features of free singlet phosphanylphosphinidenes...
-
The role of noble metals in TiO2 nanotubes for the abatement of parabens by photocatalysis, catalytic and photocatalytic ozonation
PublikacjaThe role of modified TiO2 nanotubes (TNTs) with noble metals was studied for photocatalysis, catalytic and photocatalytic ozonation of a paraben’s mixture. The TNTs were obtained by anodization and were modified by photodeposition with 0.25 mol% of Au, Pt or Pd. Results showed that solar photocatalysis led to higher degradation than UVA radiation, and under UVA radiation, the use of 3 Pt-TNTs (3 TNTs plates modified with Pt) and...
-
Lower rim substituted p-tert-butyl-calix[4]arene. Part 17. synthesis, extractive and ionophoric properties of p-tert-butylcalix[4]arene appended with hydroxamix acid moieties
PublikacjaThe synthesis and characterization of four p-tert-butylcalix[4]arene-hydroxamic acidc are reported. The dependence of the metal ion binding, assessed by liquid extraction of the metal nitrates from water into dichloromethane in individual and competitive experiments, on the ligand structure, is presented. The results showed that those ligands could be successfully used in separation process of trnasition and heavy metals often...
-
The innovative exploitation of Brassica vegetables in the production of quality food for health. From lab bench to field and fork.
PublikacjaThe specific chemical composition of vegetables belonging to Brassicaceace , as regard both nutrients and non-nutrients, renders them particularly suitable for the health food production chain. The ability of these plants to accumulate heavy metals may be utilised for phytoremediation of arable soils, but also as a vehicle to fortify foods in micronutriens such as selenium. The bioactive organosulfur compounds, especially glucosinolates...
-
Arctic catchment as a sensitive indicator of the environmental changes: distribution and migration of metals (Svalbard)
PublikacjaArctic regions experience metal pollution, despite their remote location, and the distribution and migration of those metals determine their potential impact on the local environment. Here, a High-Arctic catchment (Revelva, Svalbard) located remotely from human-induced pollution sources is studied with respect to the distribution and migration of chosen trace elements (Ag, Al, As, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Cs, Mo, Ni, Pb,...
-
Release of selected chemical elements from shale drill cuttings to aqueous solutions of different pH
PublikacjaThe effect of pH changes on leachability of light and heavy metals from shale drill cuttings generated from unconventional shale gas production was investigated. Cuttings, being the primary byproduct generated from drilling operations, belong to the potentially hazardous type of wastes due to presence of heavy and radioactive elements and remains of drilling fluid. In this regard, assessment of potentially dangerous components...
-
Operation of reed systems used to stabilization of sewage sludge
PublikacjaThe aim of this research was to determine the parameters of property operation of reed systems. It was also checked the possibility to use sludge in agriculture for the sake of heavy metal concentrations.The research was conducted in four Danish objects utilized sludge located in Helsinge, Vallo, Rudkobing and Nakskov near Copenhagen.It was found that correct operation of reed basins requires the determination of optimal doses...
-
Recovery of Valuable Materials and Methods for Their Management When Recycling Thin-Film CdTe Photovoltaic Modules
PublikacjaDue to the development of new photovoltaic technologies, there is a need to research new recycling methods for these new materials. The recovery of metals from photovoltaic (PV) modules would reduce the consumption of raw materials. Therefore, the development of recycling technologies for used and damaged modules of newer generations is important for environmental reasons. The aim of the research is to shed light on the nature...
-
Review on the quality of sediments from the stormwater drainage system in the urban area
PublikacjaThe main task of the stormwater drainage system is a safe drainage of rainwater and snowmelt from the urban area to the receiver. The flow of rain water in the drainage pipes is directly related with the formation of sediments in the whole stormwater system. In addition, pollutants from land runoff get adsorbed to the sediments. The sludge is mainly formed in those elements of stormwater drainage system, wherein the flow conditions...
-
Calix[4]arene-Thioamides as Ionophores for Transition and Heavy Metal cations
PublikacjaCalix[4]arene derivatives play an important role as sensing materials in Ion Selective Electrodes(ISEs). Nowadays a high impact is put to control in natural waters the level of toxic heavy metals, like Pb ,Cd, Hg or Cu which may cause the great risk to human health. Our goal was to design and to synthesize ligands possessing ability to bind transition and heavy metal cations. The synthesis, crystal structures,extractive and ionophoric...
-
Allergic reactions as a defense of the organism to the influence of implants components made of stainless steel
PublikacjaDue to the increasing number of cases of hypersensitivity caused by direct contact with metals, as well as the increasing demand for implants in humans all ages numerous studies on the effects of the impact of implant components are being carried out. The paper presents the phenomenon of etiology of allergy in general terms and in relation to the biomaterials used in medicine. There have been characterized in terms of impact on...
-
Allergic Reactions as a Defense of the Organism to the Influence of Implants Components Made of Stainless Steel
PublikacjaDue to the increasing number of cases of hypersensitivity caused by direct contact with metals, as well as the increasing demand for implants in humans all ages numerous studies on the effects of the impact of implant components are being carried out. The paper presents the phenomenon of etiology of allergy in general terms and in relation to the biomaterials used in medicine. There have been characterized in terms of impact on...
-
Application of Barkhausen effect in the impact assessment of welding to internal stress distribution in steel
PublikacjaThe paper presents identification method of internal stresses in plane steel elements in the chase of deliverance and welding assembly. The assessment was made by means of a non-destructive experimental method based on measurements incorporating local external magnetic field and the measurement of induced voltage, including Barkhausen noise. This method allows a degradation assessment due to internal and external actions, causing...
-
Application of Barkhausen effect in the impact assessment of welding to internal stress distribution in steel
PublikacjaThe paper presents identification method of internal stresses in plane steel elements in the chase of deliverance and welding assembly. The assessment was made by means of a non-destructive experimental method based on measurements incorporating local external magnetic field and the measurement of induced voltage, including Barkhausen noise. This method allows a degradation assessment due to internal and external actions, causing...
-
The effect of the exposure-in-oil on the contact of the polymers forming sliding layers in hydrodynamic bearings. Wpływ ekspozycji w oleju na kąt zwilżania polimerów stosowanych na warstwy ślizgowe w łożyskach hydrodynamicznych.
PublikacjaPolimery stosowane jako warstwy ślizgowe w hydrodynamicznych łożyskach wzdłużnych to zazwyczaj tworzywa termoplastyczne charakteryzujące się relatywnie wysokimi wartościami kątów zwilżania w porównaniu z metalami. Metale, w tym również Babbitt czy inne stopy łożyskowe, cechują niskie wartości kątów zwilżania. Im niższy kąt, tym powierzchnia lepiej się zwilża. Tworzywa sztuczne wykorzystywane w węzłach tribologicznych mających zapewnić...
-
Hydrothermal modification of TiO2 nanotubes in water and alkali metal electrolytes (LiNO3, NaNO3, KNO3) – Direct evidence for photocatalytic activity enhancement
PublikacjaThe influence of hydrothermal annealing (HA) of TiO2 nanotubes (TiO2-NTs) in various baths (H2O, LiNO3, NaNO3, KNO3 performed for 4 h, 24 h, 64 h), on their photocatalytic and photoelectrocatalytic properties, was studied. The use of electrolytes was to enable the monitoring of photoactivity changes as a result of the expected impact on the population of hydroxyl groups on the surface. The assumption turned out to be correct and...
-
ZnO-decorated green-synthesized multi-doped carbon dots from Chlorella pyrenoidosa for sustainable photocatalytic carbamazepine degradation
PublikacjaThe promising green synthesis of carbon dots (CDs) from microalga Chlorella pyrenoidosa was achieved using simple hydrothermal and microwave-assisted methods. Doping of nanomaterials by nonmetals (N, S, and P) was confirmed by X-ray photoelectron spectroscopy (XPS), while the existence of metals in the CDs was confirmed by inductively coupled plasma optical emission spectroscopy (ICP-OES) and transmission electron microscopy (TEM),...
-
Polaron hopping conduction in manganese borosilicate glass
PublikacjaA study on a novel material - manganese borosilicate glass without alkali metals, was reported. It was found that the obtained samples containing high amount of manganese oxide (60MnO–xSiO2–(40 − x)B2O3, x = 5, 10, 15, 20 and 30 mol%) were amorphous and homogeneous. XPS measurements showed that most of manganese ions are at oxidation level of Mn2 + ions and the mean oxidation level slightly moves toward higher value, with increasing...
-
THE POTENTIAL OF DIFFERENT VARIETIES OF WHITE CABBAGE IN PHYTOREMEDIATION OF ZN AND CD
PublikacjaThe species belong to the botanical family Brassi- caceae are considered to be useful for phytoremediation of soil contaminated with heavy metals. Problems with use the plants recognized as hyperacumulators is that, the plants need to be harvested shortly after the plants become mature, which causes problems of disposal of obtained biomass. When these plants are dried, they easily crumble and flake off, greatly reducing the yield obtained,...
-
A Family of Pb-based Superconductors with Variable Cubic to Hexagonal Packing
PublikacjaWe describe three previously unreported superconductors, BaPb3, Ba0.89Sr0.11Pb3, and Ba0.5Sr0.5Pb3. These three materials, together with SrPb3, form a distinctive isoelectronic family of intermetallic superconductors based on the stacking of Pb planes, with crystal structures that display a hexagonal to cubic perovskite-like progression, as rarely seen in metals. The superconducting transition temperatures (Tc) are similar for...
-
Mathematical modeling and prediction of pit to crack transition under cyclic thermal load using artificial neural network
PublikacjaThe formation of pitting is a major problem in most metals, which is caused by extremely localized corrosion that creates small holes in metal and subsequently, it changes into cracks under mechanical load, thermo-mechanical stress, and corrosion process factors. This research aims to study pit to crack transition phenomenon of steel boiler heat tubes under cyclic thermal load, and mathematical modeling...
-
Uptake, accumulation, and translocation of Zn, Cu, Pb, Cd, Ni, and Cr by P. australis seedlings in an urban dredged sediment mesocosm: impact of seedling origin and initial trace metal content
PublikacjaThe study presents results from 6 months of phytoremediation of sediments dredged from three urban retention tanks carried out in a mesocosm setup with the use of P. australis. Two kinds of P. australis seedlings were considered: seedlings originating from natural (uncontaminated - Suncont) and anthropogenically changed environments (contaminated – Scont); this distinction was reflected in the baseline concentrations of trace metals...
-
Phytoremediation—From Environment Cleaning to Energy Generation—Current Status and Future Perspectives
Publikacja:Phytoremediationis a technology based on the use of green plants to remove, relocate, deactivate, or destroy harmful environmental pollutants such as heavy metals, radionuclides, hydrocarbons, and pharmaceuticals. Under the general term of phytoremediation, several processes with distinctively different mechanisms of action are hidden. In this paper, the most popular modes of phytoremediation are described and discussed. A broad...
-
Correlation between chemical composition and the presence of selected groups of bacteria in freshwater samples collected from Isfjorden and Billefjorde
PublikacjaThe average concentrations of pollutants in the arctic water, snow and the atmosphere are much lower than those observed in the temperate climate. Specific conditions occurring in the polar regions have apotential to accumulate the pollutants transported from other parts of the world. In this study, attempts were made to find a correlation between selected chemical components and the bacterial population. The analysis involved...
-
Silver and Silver/Sodium Bisphosphonate Salts: Rare Examples of Molecular Solid Solutions and Their Biological Activity as Dual-Action Compounds
PublikacjaBisphosphonates (BPs) are an important treatment for osteoporosis and bone metastases due to their low toxicity, high thermostability, and the ability to inhibit bone resorption. Notably, BPs like alendronate, which contain a primary amine group, exhibit potent antiresorptive and antiangiogenic properties. Recent studies have focused on enhancing the BP properties by incorporating bioactive metals to increase their therapeutic...
-
The “autumn effect” in the gold market—does it contradict the Adaptive Market Hypothesis?
PublikacjaThe present study aims to verify the autumn effect in the gold market, first presented 10 years ago by Dirk Baur in the paper “The autumn effect of gold” and to investigate the calendar effects occurring for other precious metals. This empirical research is presented in a way to place the results obtained in the context of the Efficient Market Hypothesis (EMH) and the more current Adaptive Market Hypothesis (AMH). The study was...
-
MXene-based materials for removal of antibiotics and heavy metals from wastewater– a review
PublikacjaAs a novel family of 2D materials, MXenes provide an extensive variety of applications in water and effluent treatment due to their distinctive properties and attractive applicability, including superior electrical conductivity, higher thermal stability, hydrophilicity, and high sorption-reduction capacity. Their excellent sorption selectivity makes them perfect for removing hazardous contaminants. Currently, MXene-based materials...
-
Role of buttering layer composition on microstructural heterogeneity and mechanical properties of Alloy 617 and P92 steel dissimilar welded joints for future Indian AUSC program
PublikacjaRestrictive operating conditions (even exceeding 700 °C) of materials in advanced ultra super critical (AUSC) power plants and the need to minimize manufacturing and maintenance costs require the production of dissimilar metal welded joints (DMW). Significant differences in the physical and chemical properties of welded materials lead to phenomena that reduce the weldability of the metals used and force the search for solutions...
-
A novel approach to enhance high optically active L-lactate production from food waste by landfill leachate
PublikacjaThe recycling of food waste (FW) through anaerobic fermentation into lactic acid (LA), with two isomers L-LA and D-LA, aligns with the principles of a bio-based circular economy. However, FW fermentation is often limited by competing pathways, acidification inhibition, and trace metals deficiency. This study investigates the introduction of landfill leachate, containing buffering agents (ammonia) and trace metals, into FW fermentation....
-
White cabbage in the biofumigation process- expectations and perspectives
PublikacjaHealth risks related to common use of pesticides and artificial fertilizers raised the interest in alteranative methods of crop protection, among them biofumigation is becoming the most promising. In this process certain natural compounds, mainly degradation products of glucosinolates produced by Brassica species are used to combat pests and microorganisms attacking crops. Increased synthesis of these bioactive compounds can be...
-
The sensitivity of bacteria to heavy metals in presence of mineral ship motor oil in coastal marine sediments and waters.
PublikacjaThe sensitivity of bacteria, isolated from coastal marine sediments and waters of Sopot beach, Gdańsk Bay (Poland), to heavy metals in the presence of mineral ship motor oil were studied. All isolated heterotrophic bacteria were resistant to the 0.1 mM lead concentration occurring in the environment. Metal resistance of bacteria isolated from coastal water was strongly related to mineral ship motor oil concentration. At 0.1% mineral...
-
Application of deep eutectic solvents in atomic absorption spectrometry
PublikacjaAtomic absorption spectrometry (AAS) is a widely applied technique for metal quantification due to its practicality, easy use and low cost. However, to improve the metrological characteristics of AAS, in particular the sensitivity and the detection limit, sample pretreatment is commonly used before the detection step itself. In consideration of the principles of Green Analytical Chemistry, new solvents are being introduced into...
-
A large family of filled skutterudites stabilized by electron count
PublikacjaThe Zintl concept is important in solid-state chemistry to explain how some compounds that combine electropositive and main group elements can be stable at formulas that at their simplest level do not make any sense. The electronegative elements in such compounds form a polyatomic electron-accepting molecule inside the solid, a ‘polyanion’, that fills its available energy states with electrons from the electropositive elements...
-
Charge density wave and large nonsaturating magnetoresistance in YNiC2 and LuNiC2
PublikacjaWe report a study of physical properties of two quasi-low-dimensional metals YNiC2 and LuNiC2 including the investigation of transport, magnetotransport, galvanomagnetic, and specific heat properties. In YNiC2 we reveal two subsequent transitions associated with the formation of weakly coupled charge density wave at TCDW=318K and its locking in with the lattice at T1=275K. These characteristic temperatures follow the previously...
-
Productivity effects of trade in natural resources—comparison with mechanisms of technological specialisation
PublikacjaThis paper compares two alternative growth paths, assessing the effects on productivity of specialisation in natural resources (NR) and in technologically advanced products. The empirical analysis exploits product-level export data for 109 developing and 51 developed economies over the period 1996–2018. We document two distinct types of specialisation, based on exports either of natural resources or of technological products, and...
-
Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint
PublikacjaWelding of Inconel 617 (IN617) alloy and austenitic 304L SS steel has been attempted using the autogenous Laser Beam Welding (LBW) process. Characterization of dissimilar weldments was performed on either side of the fusion boundaries. The metallographic results showed that the inhomogeneous microstructure formation for weld metal contained columnar and cellular dendrites near the interface, whilst the columnar, cellular and equiaxed...
-
Geographic information system for remote integration of diverse under-water acoustic sensor data
PublikacjaMaritime and port areas throughout the world are exposed to many different hazards, like pollution, terrorism and natural disasters. Early detection, identification and preparation of appropriateesponse strategies is especially important in the case of semi-enclosed basins like the Baltic Sea, mainly due to the marine ecosystems' continuous absorption of pollutants including oil, heavy metals and chemicals. Many of those agents...
-
Mono- and bimetallic (Pt/Cu) titanium(IV) oxide photocatalysts. Physicochemical and photocatalytic data of magnetic nanocomposites’ shell
PublikacjaSurface modification of titania with noble and semi-noble metals resulted in significant enhancement of photocatalytic activity. Presented data, showing the photocatalytic properties of TiO2-M (where M is Pt and/or Cu) photocatalysts were further used as Fe3O4@SiO2/TiO2-M magnetic nanocomposites shells in "Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core-shell photocatalysts with Vis light activity and magnetic separability"...
-
Application of advanced spectroscopic methods in the assessment of the leachability degree of hazardous elements from the matrix of cellular concretea
PublikacjaDue to its structure, autoclaved cellular concrete exhibits good insulating properties with relatively high compressive strength values. It is increasingly used in construction because of its economic attractiveness. Autoclaved cellular concrete is mainly used in interior structure layers, and therefore its potential exposure to heavy metal leaching from the matrix may be related to the presence of a high pH medium from other materials...
-
Study of Cloud Water Samples Collected over Northern Poland
PublikacjaThe paper gives the results of the first studies on the chemistry of cloud water collected during 3 mo (Aug.–Oct. 2010) in the free atmosphere over the area to the south of the Tri-City (Gdansk-Sopot-Gdynia) conurbation on the Gulf of Gdansk, Poland. Taken from cumulus, stratus, and stratocumulus clouds by means of an aircraft-mounted collector, the water samples were analyzed for the following contaminants: anions (chlorides,...
-
The innovative exploitation of Brassica vegetables in the health quality food production chain
PublikacjaIn this overview the multidirectional opportunities of innovative exploitation of chemical and biological properties of vegetables from Brassiceae family are discussed. The specific chemical composition of brassicas, as regard both nutrients and non-nutrients, renders them particularly suitable for the health food production chain, literally from field to fork. the ability of these plants to accumulate heavy metals may be utilised...
-
The innovative Exploitation of Brassica Vegetables in the Health Quality Food Production Chain
PublikacjaIn this overview the multidirectional opportunities of innovative exploitation of chemical and biological properties of vegetables from Brassiceae family are discussed. The specific chemical composition of brassicas, as regard both nutrients and non-nutrients, renders them particularly suitable for the health food production chain, literally from field to fork. the ability of these plants to accumulate heavy metals may be utilised...
-
Convenient synthesis of 3-phosphono-β-lactams through the cyclization ofN-alkenyl-phosphonoacetamides
PublikacjaOxidative cyclization through the treatment by the transition metals is convenientsynthetic tool with a great number of applications. In the most cases the result is the formationof C-C bond between generated radical and unsaturated part of the same or another molecule.As it was presented by Trogolo it is also suitable way to obtain 4-membered heterocyclicβ-lactamic ring[1]. In this communicate we want to present new application...
-
Modeling of microstructure evolution during high-temperature oxidation of porous Fe-Cr steels
PublikacjaResearch on the high-temperature oxidation of metals and alloys is experimentally challenging due to the requirement for long-term corrosion exposure, and in the case of porous alloys, due to their complex internal microstructure. In this study, a corrosion model based on the morphological operations of dilation and erosion has been developed. This approach allows for a utilization of various raster representations of the microstructure...