Filtry
wszystkich: 350
-
Katalog
Wyniki wyszukiwania dla: BUILDING ENGINEERING
-
The use of GFRP tubes as load-bearing jackets in concrete-composite columns
PublikacjaThe paper presents the fields of applications of polymer composites in building structures. The use of composite glass fibre tubes is discussed in more detail. The laboratory methods used to test the mechanical properties of these pipes are presented. An original research program is presented, including six concrete-filled glass fibre tubes. The cylinders and columns made in this way were tested for their axial load capacity. Conclusions...
-
Włodzimierz Przybylski prof. dr inż.
Osoby -
The Review of the Selected Challenges for an Incorporation of Daylight Assessment Methods into Urban Planning in Poland
PublikacjaThe main objectives of this research it to find out if modern daylight assessment and design methods can be useful for urban residential planning in Poland. The study gives a chance to describe and appraise modern daylight design techniques. The other purpose is to illustrate how daylight knowledge could be used as an incentive to rethink the way urban environments are created. Although daylight design is acknowledged in literature...
-
Politechnika Superbohaterów
WydarzeniaAkcja poboru krwi organizowana jest przez Klub Honorowych Dawców Krwi PCK. Odbędzie się 17 stycznia 2023 roku, w godzinach od 8.30 do 14.00, w autokarze do poboru krwi, który będzie stał przed budynkiem WETI B.
-
Krystian Zawadzki dr hab. inż.
OsobyKrystian Zawadzki jest pracownikiem Katedry Finansów na Wydziale Zarządzania i Ekonomii Politechniki Gdańskiej; członkiem Polskiej Akademii Olimpijskiej przy PKOl; koordynatorem Szkoły Giełdowej (GPW) w Gdańsku; kierownikiem studiów podyplomowych "Inwestycje kapitałowe i zarządzanie finansami osobistymi"; członkiem komisji rewizyjnej klubu sportowego "Sportowa Politechnika". Założyciel kanału o tematyce naukowo-finansowo-sportowej...
-
Ewa Klugmann-Radziemska prof. dr hab.
OsobyEwa Klugmann-Radziemska ukończyła studia wyższe na kierunku fizyka na Uniwersytecie Gdańskim, a od roku 1996 związana jest z Politechniką Gdańską, kiedy to rozpoczęła studia doktoranckie. Obecnie jest profesorem na Wydziale Chemicznym Politechniki Gdańskiej, od roku 2006 kierownikiem Katedry Aparatury i Maszynoznawstwa Chemicznego. W latach 2008–2016 pełniła funkcję Prodziekana ds. współpracy i rozwoju, w latach 2016-2019 była...
-
The Use of an Ontotrigger for Designing the Ontology of a Model Maturity Capsule
PublikacjaThe aim of this work is to give the definition and present the possibility of applying (introduced and defined here) ontotriggers to design the ontology of a maturity capsule used in the assessment of IT projects. The complexity of designing ontology processes raises the question of whether there is a need for designing ontologies in a situation where it is possible to map them. The work is divided into four main parts. The first...
-
Valuation of architectural heritage by multicultural student groups
PublikacjaIn this article, the author addresses the education of architecture students in the field of architectural history and the determination of the value of architectural objects. Important changes at present are underway concerning this. Both the role of architectural history in architectural education and content in architectural history curricula is changing. The need for re-evaluation...
-
From a Point Cloud to a 3D Model - an Exercise for Users of AutoCAD and Revit
PublikacjaThe paper presents a proposal of the topic of an exercise for students of building faculties as part of classes on 3D modelling. The task consists in creating a three-dimensional model based on the measurement obtained with the Leica P30 laser scanner. Due to the maximum number of points in the cloud in the presented programs, the output files must be properly cleared and reduced. The point cloud was pre-processed in Cyclone software....
-
Modeling BIM Objects From Point Clouds. Examples
PublikacjaThe article presents several ways to obtain BIM (Building Information Modeling) models from point clouds using standard commands in Revit 2018. In Revit geometric forms are possible to obtain in project, family or conceptual environments. Efficient modeling requires knowledge of methods of creating families and components in these environments and ways to combine them. Modeling methods with system and loadable families are presented,...
-
Simulation of the response of base-isolated buildings under earthquake excitations considering soil flexibility
PublikacjaThe accurate analysis of the seismic response of isolated structures requires the incorporation of the flexibility of supporting soil. However, it is often customary to idealize the soil as rigid during the analysis of such structures. In the present paper, seismic response time history analyses of base-isolated buildings modelled as single degree-of-freedom (SDOF) and multi degree-of-freedom (MDOF) systems with linear and nonlinear...
-
New Materiality-towards ‘Media Environments
PublikacjaArticle presents media solutions providing new materiality of architectural spaces. Media solutions in architecture evolve in new forms. Articlepresentsboth the developmentof new technological solutionsas well as new ways of application of media solutions in relation toarchitectural form. The aim of the article is to show technical aspects of new materiality - intelligent materials, allowing transmission of changeable visual content...
-
The ancient formula of master-apprentice relevance in contemporary architecture education.
PublikacjaThe universalization of the methodology for determining the quality of European higher education exposes the aspect of supporting the student in the education process, which takes the form of tutoring or supervising - a modern form of ancient master-apprentice relationship. The 'master' in architectural education has lawful building qualification and is a member in national architect association - a sine qua non with respect to...
-
Performance of Vector-valued Intensity Measures for Estimating Residual Drift of Steel MRFs with Viscous Dampers
PublikacjaViscous Dampers (VDs) are widely used as passive energy dissipation system for improving seismic performance levels especially in retrofitting of buildings. Residual Inter-story Drift Ratio (R-IDR) is another important factor that specifies the condition of building after earthquake. The values of R-IDR illustrates the possibility of retrofitting and repairing of a building. Therefore, this study aims to explore the vector-valued...
-
Jakub Jabłoński inż.
OsobyWykształcenie Jakub Jabłoński w roku 2016 ukończył XX Liceum Ogólnokształcące im. Zbigniewa Herberta w Gdańsku (klasa o profilu matematyczno-fizyczno-informatycznym). Od 2017 rozpoczął studia I stopnia na kierunku Geodezja i Kartografia na Wydziale Inżynierii Lądowej i Środowiska Politechniki Gdańskiej, które w 2021 roku zakończył otrzymując tytuł inżyniera. W trakcie studiów brał czynny udział w Kole Naukowym Hevelius. Zatrudnienie Około...
-
International architectural - urban - landscape design workshops to strengthen students’ education, capabilities and mobility
PublikacjaFive international architectural/urban/landscape workshops in Poland and Portugal between 2011 and 2015 are discussed in this article. The general aims of the workshops were to plan to connect divided city spaces, to harmonise them and make them attractive for different uses. The main task was to create in multicultural groups of students the vision of sustainable development in the context of architecture, urban and landscape...
-
Flexural behavior of composite structural insulated panels with magnesium oxide board facings
PublikacjaThe current report is devoted to the flexural analysis of a composite structural insulated panel (CSIP) with magnesium oxide board facings and expanded polystyrene (EPS) core, that was recently introduced to the building industry. An advanced nonlinear FE model was created in the ABAQUS environment, able to simulate the CSIP’s flexural behavior in great detail. An original custom code procedure was developed, which allowed to include...
-
Load capacity of steel-aluminium brackets under static and cyclic laboratory tests
PublikacjaThe aim of the research is the laboratory investigation of steel-aluminium brackets employed to fasten lightweight curtain walls to building facilities. Static pressure, suction forces, and cyclic loads parallel to end plates (horizontal – to simulate wind influence) were applied in the study. The steel-aluminium brackets were tested on a reinforced concrete substrate made of C30/37 concrete class to simulate the real working conditions....
-
Metal-organic frameworks (MOF) based heat transfer: A comprehensive review
PublikacjaHigher than a standard level, the humidity provides a suitable environment for the pathogenic microorganisms to grow and increases energy consumption for cooling, increasing greenhouse gas emissions. Desiccant air-conditioning (DAC) is an effective method to reduce humidity and energy simultaneously. Conventional desiccants are not suitable for use as a desiccant in building air conditioners, mainly because of high regeneration...
-
Comparison of 3D Point Cloud Completion Networks for High Altitude Lidar Scans of Buildings
PublikacjaHigh altitude lidar scans allow for rapid acquisition of big spatial data representing entire city blocks. Unfortunately, the raw point clouds acquired by this method are largely incomplete due to object occlusions and restrictions in scanning angles and sensor resolution, which can negatively affect the obtained results. In recent years, many new solutions for 3D point cloud completion have been created and tested on various objects;...
-
Probabilistic assessment of SMRFs with infill masonry walls incorporating nonlinear soil-structure interaction
PublikacjaInfill Masonry Walls (IMWs) are used in the perimeter of a building to separate the inner and outer space. IMWs may affect the lateral behavior of buildings, while they are different from those partition walls that separate two inner spaces. This study focused on the seismic vulnerability assessment of Steel Moment-Resisting Frames (SMRFs) assuming different placement of IMWs incorporating nonlinear Soil-Structure Interaction (SSI)....
-
Effect of Pendolino high-speed rail on the structure of buildings located the proximity of the railway tracks
PublikacjaThe following research focuses on the dynamic analysis of the impact of the high-speed train inducted vibrations on the structures located near railway tracks. The office complex chosen as the subject of calculations is located in the northern part of Poland, in Gdańsk, in the proximity of Pendolino, the high speed train route. The high speed trains are the response for the growing needs for more efficient railway system. However...
-
Design of residential buildings in architecture education
PublikacjaThis article is based on an analysis of residential building designs made by students of the Faculty of Architecture at Gdańsk University of Technology (FA-GUT), Poland, and on the results of a survey conducted among these students. The purpose of the survey was to verify the broad, interdisciplinary knowledge of the students required in preparation for taking up design issues, as well as their ability to use this knowledge in...
-
Modelling of laminated glass PVB walls of buildings exposed to vehicle impact with different speeds
PublikacjaThis paper presents an analytical model, developed for laminated glass subjected to a low-velocity impact. It has the ability to capture glass cracks as well as large non-linear deformations. It is based mathematically on the firstorder deformation concept, which considers the effect of membrane and transverse shear as well as bending. This theory uses damage mechanics to capture the glass cracking. For this purpose, several experiments...
-
Analysis of floor-to-column pounding of buildings founded on different soil types
PublikacjaThe aim of this study is to investigate the effect of the soil type on buildings experiencing floor-to-column pounding during earthquakes. Five buildings with 4-storeys, 6-storeys, and 7-storeys were considered. Three types of the 4-storey building with different total heights were taken into account which leads to floor-to-column pounding at 1/3, 1/2 and 2/3 of the height of the impacted column. Two pounding scenarios were considered,...
-
Damage-involved response of two colliding buildings under non-uniform earthquake loading
PublikacjaPounding between insufficiently separated buildings, which may result in considerable damage or may even lead to the total collapse of colliding structures, has been repeatedly observed during earthquakes. Earthquake-induced collisions of buildings has been intensively studied applying various structural models. It was assumed in the analyses, however, that the seismic excitation is identical for all structural supports; whereas,...
-
The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces.
PublikacjaThis paper presents the possibility of adding lightweight building aggregates to increase the stability – mechanical as well as thermal - of constructions and road objects. This stability can be achieved through saturating the porous granules of aggregate with a phase-change material (PCM) that allows the accumulation of solar heat. Intense solar radiation, especially during the summer, can cause the asphalt on road surfaces, bridges...
-
Tomasz Szymański dr inż. arch.
OsobyTomasz Szymański (dr inż. arch.) jest architektem i adiunktem na Wydziale Architektury Politechniki Gdańskiej. Absolwent Wydziału Architektury Politechniki Gdańskiej. Studia zakończone dyplomem z wyróżnieniem. Zainteresowania badawcze dr. Tomasza Szymańskiego skoncentrowane są wokół kwestii dziedzictwa przemysłowego, re-use, adaptacji i rewitalizacji obiektów poprzemysłowych, obiektów poportowych i postoczniowych na nowe funkcje...
-
Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers
PublikacjaSeismic-induced pounding between adjacent buildings may have serious consequences, ranging from minor damage up to total collapse. Therefore, researchers try to mitigate the pounding problem using different methods, such as coupling the adjacent buildings with stiff beams, connecting them by using viscoelastic links, and installing damping devices in each building individually. In the current paper, the effect of using linear and...
-
Adam Władziński
OsobyAdam Władziński, doktorant na Politechnice Gdańskiej, specjalizuje się w inżynierii biomedycznej, skupiając się na uczeniu maszynowym do przetwarzania obrazów z druku 3D układów pomiarowych i tkanek biologicznych, a także na komercyjnym zastosowaniu technologii blockchain. Posiadając wykształcenie z dziedziny elektroniki na Wydziale Elektroniki, Telekomunikacji i Informatyki (ETI), praca magisterska Adama Władzińskiego koncentrowała...
-
A Computationally Efficient Model for Predicting Successful Memory Encoding Using Machine-Learning-based EEG Channel Selection
PublikacjaComputational cost is an important consideration for memory encoding prediction models that use data from dozens of implanted electrodes. We propose a method to reduce computational expense by selecting a subset of all the electrodes to build the prediction model. The electrodes were selected based on their likelihood of measuring brain activity useful for predicting memory encoding better than chance (in terms of AUC). A logistic...
-
Michał Bernard Pietrzak dr hab.
OsobyMichał Bernard Pietrzak jest kierownikiem Katedry Statystyki i Ekonometrii na Wydziale Ekonomii i Zarządzania Politechniki Gdańskiej oraz zastępcą redaktora naczelnego ds. oceny pod względem poprawności statystycznej czasopism: Oeconomia Copernicana i Equilibrium. Quarterly Journal of Economics and Economic Policy. Do października 2021 pracował na stanowisku profesora nadzwyczajnego na Wydziale Nauk Ekonomicznych i Zarządzania,...
-
On time-dependent nonlinear dynamic response of micro-elastic solids
PublikacjaA new approach to the mechanical response of micro-mechanic problems is presented using the modified couple stress theory. This model captured micro-turns due to micro-particles' rotations which could be essential for microstructural materials and/or at small scales. In a micro media based on the small rotations, sub-particles can also turn except the whole domain rotation. However, this framework is competent for a static medium....
-
Machine learning-based seismic response and performance assessment of reinforced concrete buildings
PublikacjaComplexity and unpredictability nature of earthquakes makes them unique external loads that there is no unique formula used for the prediction of seismic responses. Hence, this research aims to implement the most well-known Machine Learning (ML) methods in Python software to propose a prediction model for seismic response and performance assessment of Reinforced Concrete Moment-Resisting Frames (RC MRFs). To prepare 92,400 data...
-
Wiktoria Wojnicz dr hab. inż.
OsobyDSc in Mechanics (in the field of Biomechanics) - Lodz Univeristy of Technology, 2019 PhD in Mechanics (in the field of Biomechanics) - Lodz Univeristy of Technology, 2009 (with distinction) Publikacje z listy MNiSW (2009 - ) Wojnicz W., Wittbrodt E., Analysis of muscles' behaviour. Part I. The computational model of muscle. Acta of Bioengineering and Biomechanics, Vol. 11, No.4, 2009, p. 15-21 Wojnicz W., Wittbrodt E., Analysis...
-
Analytical tools for functional assessment of architectural layouts
PublikacjaFunctional layout of the building, understood as a layout or set of the facility rooms (or groups of rooms) with a system of internal communication, creates an environment and a place of mutual relations between the occupants of the object. Achieving optimal (from the occupants’ point of view) spatial arrangement is possible through activities that often go beyond the stage of architectural design. Adopted in the architectural...
-
Utopian Kinetic Structures and Their Impact on the Contemporary Architecture
PublikacjaThis paper delves into relationships between twentieth century utopian concepts of movable structures and the kinematic solutions implemented in contemporary architectural projects. The reason for conducting this study is to determine the impact of early architectural conceptions on today's solutions. This paper points out close links that stem from the imagination of artists and architects working in 1960s and 70s and the solutions...
-
Inverse modeling for fast design optimization of small-size rat-race couplers incorporating compact cells
PublikacjaIn the paper, a framework for computationally-efficient design optimization of compact rat-race couplers (RRCs) is discussed. A class of hybrid RRCs with variable operating conditions is investigated, whose size reduction is obtained by replacing ordinary transmission lines with compact microstrip resonant cells (CMRCs). Our approach employs a bottom-up design strategy leading to the development of compact RRCs through rapid design...
-
Performance‐driven modeling of compact couplers in restricted domains
PublikacjaFast surrogate models can play an important role in reducing the cost of EM-driven design closure of miniaturized microwave components. Unfortunately, construction of such models is challenging due to curse of dimensionality and wide range of geometry parameters that need to be included in order to make it practically useful. In this letter, a novel approach to design-oriented modeling of compact couplers is presented. Our method...
-
Jerzy Konorski dr hab. inż.
OsobyJerzy Konorski otrzymał tytuł mgr inż. telekomunikacji na Poitechnice Gdańskiej, zaś stopień doktora n.t. w dyscyplinie informatyka w Instytucie Podstaw Informatyki PAN. W r. 2007 obronił rozprawę habilitacyjną na Wydziale Elektroniki, Telekomnikacji i Informatyki PG. Jest autorem ponad 150 publikacji naukowych, prowadził projekty naukowo-badawcze finansowane ze środków Komitetu Badań Naukowych, UE, US Air Force Office of Scientific...
-
Cost-Efficient Design Methodology for Compact Rat-Race Couplers
PublikacjaIn this article, a reliable and low-cost design methodology for simulation-driven optimization of miniaturized rat-race couplers (RRCs) is presented. We exploit a two-stage design approach, where a composite structure (a basic building block of the RRC structure) is first optimized using a pattern search algorithm, and, subsequently, the entire coupler is tuned by means of surrogate-based optimization (SBO) procedure. SBO is executed...
-
Chemical treatment of crystalline silicon solar cells as a main stage of pv modules recycling = Obróbka chemiczna krzemowych ogniw słonecznych jako najważniejszy etap w recyklingu modułów fotowoltaicznych
PublikacjaIn recent years, photovoltaic systems have gained worldwide recognition and popularity as a environmentally friendly way of solving energetic problems. However, a problem of utilizing worn out photovoltaic systems, amount of which will rapidly increase in the future, is yet to be solved. Establishing a technology of recycling and reusing obsolete photovoltaic panels is a necessity.Photovoltaic modules in crystalline silicon solar...
-
Authenticity of Architectural Heritage in a Rebuilt City. Comments to Vaclav Havel’s Impression after His Visit in Gdansk in 2005
PublikacjaThere is no doubt that authenticity is a cardinal feature of architectural heritage and should be protected in the same way as historical and cultural value of monuments or their integrity. Sometimes, one decides to reconstruct a destroyed historical building due to important emotional, scientific, artistic or political reasons (e.g. the Zwinger Palace in Dresden or the Royal Castle in Warsaw). However, the solution which should...
-
Aneta Sobiechowska-Ziegert dr
OsobyPracuje w Katedrze Statystyki i Ekonometrii na Wydziale Zarządzania i Ekonomii, pasjonatka stosowania nowoczesnych metod dydaktycznych w nauczaniu przedmiotów ilościowych, dyplomowany coach i certyfikowana tutorka. Prowadzi zajęcia z prognozowania gospodarczego i ekonometrii przestrzennej. Przewodniczy Wydziałowej Komisji Jakości Kształcenia i opiekuje się ścieżką kształcenia EMOS, certyfikowaną przez Eurostat. Obecnie koordynuje...
-
Joanna Kabrońska dr inż. arch.
OsobyDoktorat z wyróżnieniem: Forma rozwiązań architektonicznych jako droga realizacji idei biblioteki przyszłości, 1994 Laureatka IV Międzynarodowego Biennale Architektury w Krakowie, 1991 Stypendystka DAAD post-doctoral scholarship, Berlin, 2002 Autorka publikacji dotyczących relacji architektury, sztuki i pamięci, między innymi monografii Architektura jako forma pamięci. Rola architektury w tworzeniu współczesnego horyzontu wartości,...
-
Błażej Kochański dr
OsobyBłażej Kochański jest adiunktem w Katedrze Statystyki i Ekonometrii na Wydziale Zarządzania i Ekonomii Politechniki Gdańskiej, ekspertem ds. ryzyka bankowego. Pracował dla banków w Polsce i Europie jako specjalista ds. ryzyka, kierownik ds. planowania i analiz, członek zarządu ds. ryzyka, członek rady nadzorczej i konsultant ds. zarządzania. Zbudował liczne modele predykcyjne wspomagające zarządzanie ryzykiem, z sukcesem zarządzał...
-
Jacek Mąkinia prof. dr hab. inż.
Osoby -
Properties of Old Concrete Built in the Former Leipziger Palace
PublikacjaThis research aims to determine the mechanical, chemical, and physical properties of old concrete used in the former Leipziger Palace in Wrocław, Poland. The cylindrical specimens were taken from the basement concrete walls using a concrete core borehole diamond drill machine. The determination of the durability and strength of old concrete was based on specified chosen properties of the old concrete obtained through the following...
-
Anna Maria Trzaskowska dr inż.
OsobyAnna Maria Trzaskowska od 2017 roku jest zatrudniona na stanowisku adiunkta na Wydziale Zarządzania i Ekonomii w Katedrze Informatyki w Zarządzaniu. Przez ponad 2 lata pełniła funkcję Zastępcy Kierownika Katedry oraz Quality Lead na studiach MBA prowadzonych na wydziale. Od 2018 roku Kierownik Programu międzywydziałowego kierunku Inżynieria Danych. Od 2021 roku Kierownik Projektu oraz członek kilku projektów międzynarodowych w...
-
Damian Ciachorowski
OsobyDoktorant w dziedzinie Zrównoważonej Transformacji Cyfrowej na Wydziale Zarządzania i Ekonomii Politechniki Gdańskiej. Ekspert w dziedzinie organizacji pozarządowych. Specjalizuje się w tworzeniu strategii rozwoju, budowaniu zespołów międzykulturowych oraz akceleracji i zarządzaniu organizacjami pozarządowymi. Zainteresowania badawcze Zrównoważona transformacja cyfrowa Kreatywność w procesach zarządzania zespołem AI Management...