Wyniki wyszukiwania dla: laminaty
-
Experimental Investigation of the Properties of Laminated Nonwovens Used for Packaging of Powders in Mineral Warmers
Publikacja -
The Influence of Hybridization of Epoxy–Glass Laminates Modified with Metal Oxides and Graphite Particles
Publikacja -
Experimental and Numerical Study on Mechanical Characteristics of Aluminum/Glass Fiber Composite Laminates
PublikacjaThe fiber-metal composites made of aluminum sheets and glass fibers reinforced with a polyester resin as the matrix were studied. The composites were prepared by hand lay-up method. Some aspects of manufacturing affecting the composite behavior were considered. In particular, the influences of the arrangement of layers and their number on the mechanical and physical properties of composites with ten different compositions were...
-
Progressive failure analysis of laminates in the framework of 6-field nonlinear shell theory
PublikacjaThe paper presents the model of progressive failure analysis of laminates incorporated into the 6-field non-linear shell theory with non-symmetrical strain measures of Cosserat type. Such a theory is specially recommended in the analysis of shells with intersections due to its specific kinematics including the so-called drilling rotation. As a consequence of asymmetry of strain measures, modified laminates failure criteria must...
-
Large rotations in first-order shear deformation FE analysis of laminated shells
PublikacjaAbstrakt: Teoria powłok o skończonych obrotach w ramach modelu ścinania pierwszego rzędu stanowi podstawę zaprezentowanego w pracy algorytmu MES statycznej, geometrycznie nieliniowej analizy konstrukcji warstwowych. Szczególną uwagę zwrócono na właściwy opis skończonych obrotów przy zastosowaniu kątów Eulera oraz procedurę uaktualniania parametrów obrotowych. Przedstawiono sformułowanie przyrostowe w stacjonarnym opisie Lagrange´a....
-
Environmental stress cracking in e-glass and aramid/glass epoxy composites
PublikacjaKompozyty epoksydowe wzmocnione włóknami szklanymi są dość odporne na wpływy środowiskowe w stanie nieobciążonym, jednak po przyłożeniu obciążeń łatwo pękają w środowisku wody i rozcieńczonych kwasów. Charakterystyki propagacji pęknięć środowiskowych w laminatach szklano/epoksydowych były przedmiotem szeregu prac, jednak brak jest danych na temat zachowania laminatów o wzmocnieniu hybrydowym aramidowo-szklanym stosowanych w budowie...
-
Optimal segmented dampers configuration for a laminar body carrying variable payload
PublikacjaPublikacja prezentuje zagadnienia analizy doboru tłumienia i konfiguracji elementów tłumiących dla ciała płaskiego poddanego dwóm stanom obciążenia. W pracy zaakceptowano użycie elementów tłumiących o tłumieniu wiskotycznym i o współczynniku tłumienie zależnym od położenia tłoka tego elementu. Ponieważ różne aspekty komfortu prowadzą do przeciwnych wytycznych odnośnie wyboru własności tłumiących, rozwiązanie dobory parametrów tłumienia...
-
SIMULATION AND EXPERIMENTAL RESEARCH OF CLAW POLE MACHINE WITH A HYBRID EXCITATION AND LAMINATED ROTOR CORE
Publikacja -
Modelling of laminated glass PVB walls of buildings exposed to vehicle impact with different speeds
PublikacjaThis paper presents an analytical model, developed for laminated glass subjected to a low-velocity impact. It has the ability to capture glass cracks as well as large non-linear deformations. It is based mathematically on the firstorder deformation concept, which considers the effect of membrane and transverse shear as well as bending. This theory uses damage mechanics to capture the glass cracking. For this purpose, several experiments...
-
Examination of selected failure criteria with asymmetric shear stresses in the collapse analysis of laminated shells
PublikacjaThe paper is concerned with failure analysis of composite shells performed with the usage of the nonlinear 6‐parameter shell theory with drilling rotation degree of freedom. This special theory embodies naturally unlim-ited translations and rotations and is suitable for analysis of irregular shells for instance with various, partic-ularly orthogonal, intersections. The presence of the drilling rotation is inherently accompanied...
-
Equivalent Single Layer Models in Free Vibration Analysis of Laminated Multi-Layered Plates
PublikacjaThe performance of selected equivalent single-layer (ESL) models is evaluated within several classical benchmark tests for small amplitude free vibration analysis of multi-layered plates. The authors elaborated their own Finite Element software based on the first-order shear deformation (FOSD) theory with some modifications incorporated including a correction of the transverse shear stiffness and an application of zigzag type functions....
-
Cylindrical orifice testing in laminar flow with the orifice diameter ratio β = 0.5
PublikacjaThe paper presents the results of an experimental study of a cylindrical orifice with the orifice diameter ratio β = 0.5 and the flow opening length‑to‑diameter ratio L/d = 1, with hydraulic oil flowing in the DN50 measuring channel. The measurements of the values characterising the oil flow were made in the laminar flow regime, for the Reynolds numbers ranging between Re = 100 to 950. Based on the experimental tests, standard...
-
Wpływ zmiennych własności adhezyjnych powierzchni klejonych na propagację pęknięcia w złączu Al/laminat epoksydowo - węglowy
PublikacjaPraca dotyczy oceny efektywności wstępnej obróbki powierzchni klejonych polegającej na zastosowaniu dwóch różnych sposobów obróbki (piaskowanie lub polerowanie), na tej samej próbce naprzemiennie. Badania przeprowadzono na próbce sklejonej z płytki aluminiowej i płytki z laminatu epoksydowo/węglowego z pęknięciem zainicjowanym przez wbicie znormalizowanego klina pomiędzy płytki (wedge test wg. Boeing'a). Badano przebieg propagacji...
-
Ekspertyza nr WOiO/II/78/2015 n.t. własności mechanicznych laminatów epoksydowo-bazaltowych
PublikacjaWspółczesne konstrukcje jachtów często wykonywane są z materiałów kompozytowych. Najczęściej stosowane są kompozyty (laminaty), których zbrojenie wykonane jest z włókna szklanego bądź węglowego, przesyconego żywicą (poliestrową, epoksydową, winyloestrową). W przemyśle jachtowym, co raz częściej stosuje się zbrojenia wykonane z włókien bazaltowych. Zleceniodawca dostarczył próbki wykonane z różnych materiałów, w tym m.in ze wspomnianych...
-
Water absorption and blistering of glass fibre-reinforced polymer marine laminates with nanoparticle-modified coatings
PublikacjaMacro and microstructural damage was studied in typical glass fibre-reinforced polymer laminates with two types of coating systems – (a) isophtalic gel coat: pure or mixed with SiO2 nanoparticles 5 wt% (5%N) or 10 wt% (10%N) and (b) a two-layer coating system: urethane-modified vinyl ester-based gel coat and additional polyester barrier coat layer. Accelerated tests were performed at 50C for 50 days for specimens with nanoparticle-modified...
-
Experimental research on over-laminated steel sandwich panel connection to determine the form of fatigue failure
PublikacjaThe novel means of transport need to meet rising both the economic and ecologic requirements. In recent years the International Maritime Organization (IMO) introduced new measure of ship energy efficiency (the EEDI index), as well as new regulations regarding higher quality of fuel (so called Tier limits). It resulted in much higher interest of the technological development of ships. One of the solution having great potential is...
-
2-D constitutive equations for orthotropic Cosserat type laminated shells in finite element analysis
PublikacjaWe propose 2-D Cosserat type orthotropic constitutive equations for laminated shells for the purpose of initial failure estimation in a laminate layer. We use nonlinear 6-parameter shell theory with asymmetric membrane strain measures and Cosserat kinematics as the framework. This theory is specially dedicated to the analysis of irregular shells, inter alia, with orthogonal intersections, since it takes into account the drilling...
-
Laminated plates and shells - first ply failure analysis within 6-parameter shell theory
PublikacjaThis work describes Tsai-Wu and Hashin criteria modifications, dictated by nonlinear 6-parameter shell theory with asymmetric strain measures and drilling rotation. The material law is based on standard orthotropic elastic constants for a non-polar continuum, under plane state of stress. First ply failure loads of cylindrical panel subjected to pressure and flat compressed plate are estimated by means of Finite Element Analysis....
-
Badania energii oporu pękania interlaminarnego GIIC kompozytów polimerowych zbrojonych włóknem szklanym i aramidowym
PublikacjaZbadano energię pękania interlaminarnego GIIc epoksydowych kompozytów warstwowych zbrojonych tkaniną aramidowo-szklaną i szklaną w próbie trzypunktowego zginania próbek ENF ze sztucznie zalaminowaną szczeliną. Z uzyskanych wy-ników wynika, iż laminaty zbrojone tkaniną aramidowo-szklaną wykazują znaczną krytyczną energię pękania interlaminarnego przy II typie obciążeń, większą niż laminaty zbrojone włóknem szklanym. Ponieważ GIIc...
-
Wpływ metody wytwarzania na właściwości laminatów poliestrowo/szklanych do budowy małych jednostek pływających
PublikacjaW pracy porównano pod względem mikrostruktury i wybranych wskaźników wytrzymałościowych jakość laminatów poliestowo/szklanych wytworzonych w zakładzie budowy dużych łodzi motorowych za pomocą metod: ręcznej, worka próżniowego i infuzji. Badano jakość struktury pod kątem udziału osnowy żywicznej i liczby pęcherzy za pomocą SEM i analizy obrazu. Porównano własności mechaniczne na podstawie prób: trzypunktowego zginania, ścinania...
-
A novel sandwich footbridge - Practical application of laminated composites in bridge design and in situ measurements of static response
PublikacjaA novel sandwich composite footbridge is presented in the paper, as an example of practical application of laminated composites in civil engineering. The in situ static load tests of the footbridge before its acceptation for exploitation are shown and discussed. The results are compared with the corresponding ones from a numerical equivalent single layer model of the sandwich structure created within the framework of finite element...
-
Recent Achievements in Constitutive Equations of Laminates and Functionally Graded Structures Formulated in the Resultant Nonlinear Shell Theory
PublikacjaThe development of constitutive equations formulated in the resultant nonlinear shell theory is presented. The specific features of the present shell theory are drilling rotation naturally included in the formulation and asymmetric measures of strains and stress resultants. The special attention in the chapter is given to recent achievements: progressive failure analysis of laminated shells and elastoplastic constitutive relation...
-
Sensitivity analysis of free torsional vibration frequencies of thin-walled laminated beams under axial load
PublikacjaThe paper addresses sensitivity analysis of free torsional vibration frequencies of thin-walled beams of bisymmetric open cross-section made of unidirectional fibre-reinforced laminate. The warping effect and the axial end load are taken into account. The consideration is based upon the classical theory of thin-walled beams of non-deformable cross-section. The first-order sensitivity variation of the frequencies is derived with...
-
A high-order compact difference algorithm for half-staggered grids for laminar and turbulent incompressible flows
Publikacja -
Study of a Flame Kernel Evolution in a Turbulent Mixing Layer Using LES with a Laminar Chemistry Model
Publikacja -
Monoterpenes emissions from different samples of wood-based materials – laminated chipboards and medium-density fiberboards (MDF)
PublikacjaThe paper presents the results of studies on emission rates of monoterpenes, carried out with the use of a new type of device - Markes’ Micro-Chamber/Thermal Extractor™ (μ-CTE250). Subject of studies were different types of wood-based materials such as: laminated chipboards and medium-density fiberboards (MDF). Based on the results obtained one can conclude that the laminated chipboards may affect the indoor air quality in much...
-
The effect of hybridization of fire retarded epoxy/flax-cotton fiber laminates by expanded vermiculite: Structure-property relationship study
PublikacjaThe study describes the hybridization of epoxy/flax-cotton (EP/FF) composites containing ammonium polyphosphate (APP) with micrometric expanded vermiculite (VMT) (1–10 wt%). The efficiency of hybridization of flame retarded epoxy/flax-cotton composites was assessed by performing static tensile and flexural strength evaluation, supplemented by impact strength measurements of the composites. Moreover, thermal and thermomechanical...
-
Badania różnicy koloru laminatów z żelkotem modyfikowanym nanocząstkami w środowisku wodnym – metody obliczeniowe ΔEab, ΔE94, ΔE00
PublikacjaW Artykule przedstawiono rozważania na temat interpretacji wyników oraz wpływu metody obliczeniowej różnicy koloru na wyniki ΔE. Zbadano wpływ dodatku nanocząstek SiO2 w laminacie epoxydowo-szklanym na zmianę koloru podczas ekspozycji w środowisku wodnym.
-
The spectral finite element model for analysis of flexural-shear coupled wave propagation. Part 1, Laminated multilayer composite beam
PublikacjaW pracy przedstawiono model spectralnego elementu skończonego umożliwiającego symulację propagacji fali giętno-ścinającej w materiałąch kompozytowych.
-
Prediction of maximum tensile stress in plain-weave composite laminates with interacting holes via stacked machine learning algorithms: A comparative study
PublikacjaPlain weave composite is a long-lasting type of fabric composite that is stable enough when being handled. Open-hole composites have been widely used in industry, though they have weak structural performance and complex design processes. An extensive number of material/geometry parameters have been utilized for designing these composites, thereby an efficient computational tool is essential for that purpose. Different Machine Learning...
-
Mechanika konstrukcji laminatowych, PG_00056255
Kursy OnlinePodstawowe charakterystyki materiałowe materiałów kompozytowych, prawo mieszanin, wyprowadzeniemacierzy sztywności dla pojedynczej laminy dowolnie zorientowanej, wyprowadzenie macierzy sztywnościkompletnego laminatu, analiza sprzężeń obciążenie-deformacja, wyboczenie konstrukcji laminowanej,rozwiązanie zagadnienia dynamicznego.
-
Effect of Laminar Pulsatile Fluid Flow on Separation of Volatile Organic Compounds from Aqueous Solution by a Hollow Fiber Membrane-Based Process
PublikacjaIn this study, a laminar pulsatile fluid flow was used for the separation of benzene, toluene, ethylbenzene, and xylene isomers (BTEX) from aqueous solutions. Polyether sulfone hollow fiber membrane has been applied to this process. The effects of BTEX concentration, and feed and extraction flow rates were examined. It was found that the application of the pulsatile fluid flow with...
-
Measurement of mass flow of viscous liquid through a Cylindrical Orifice under laminar flow (CylOr)
Dane BadawczeThe data was obtained as part of the project "Measurement of mass flow of viscous liquid through a Cylindrical Orifice under laminar flow (CylOr)", in which flow tests of hydraulic oil through a cylindrical orifice with a thickness of l = 25 mm and a throat b = 0.5 (diameter pipes D = 50 mm, orifice diameter d = 25 mm) on the test stand at the Department...
-
Sensitivity analysis in design process of sandwich U-shaped composite footbridge
PublikacjaThe structure of the sandwich composite footbridge of a 14 metre span length and U-shaped cross-section was analysed. Sensitivity analysis was performed to support the design process of this innovative object. Linear discrete sensitivity analysis was performed by means of finite element method. The influence of vari-ation of several design variables i.e. thicknesses of inner and outer laminates on the mid-span deflection, as-sumed...
-
Numerical modeling and experimental validation of full-scale segment to support design of novel GFRP footbridge
PublikacjaThe paper contains analysis of full-scaled three meters long segment of a novel composite footbridge. Both numerical modeling and experimental validation were performed. Analyzed object is a shell type sandwich channel-like structure made of composite sandwich with GFRP laminates as a skin and PET foam as a core. Several static load schemes were performed including vertical and horizontal forces. In FEM analysis multilayered laminate...
-
Sensitivity analysis of a composite footbridge
PublikacjaThis work include an example of sensitivity analysis for the design of a composite footbridge. A sandwich structure is used, consisting two high-strength skins separated by a core material. The analysis was conducted for two numerical models. The first one is a simple, single-span beam of a composite cross-section (laminate and foam), with different Young’s modulus for each material. Calculations were made by means of a MATLAB-based...
-
Wpływ rodzaju zbrojenia i kolejności ułożenia warstw na tolerancję zniszczeń wywołanych udarami o małej prędkości z laminatów epoksydowych zbrojonych włóknem węglowym, szklanym, Kevlarowym i hybrydowych
PublikacjaPorównano zachowanie pod obciążeniem statycznym i udarowym laminatów epoksydowych zbrojonych tkaniną węglową lub szklaną z właściwościami laminatów hybrydowych zawierających zarówno zbrojenia szklane jak i węglowe w różnej ilości i układzie geometrycznym.
-
Analiza konstrukcji ramy nośnej wyczynowego roweru wodnego Rektor na przykładzie wybranego węzła
PublikacjaW pracy poruszono problem zmniejszenia masy wyczynowego roweru wodnego Rektor bez utraty jego wytrzymałości. W tym celu przeprowadzone zostały wieloetapowe obliczenia wybra- nego węzła konstrukcyjnego. Ponadto omówiono technologię wykonania rur kompozytowych. Podczas analizy sprawdzono trzy przypadki różniące się materiałem, z którego wykonano ramę, odpowiednio: z aluminium, laminatu zbrojonego włóknem szklanym oraz laminatu zbrojonego...
-
Influence of Fragment Size on the Time and Temperature of Ethylene Vinyl Acetate Lamination Decomposition in the Photovoltaic Module Recycling Process
PublikacjaPhotovoltaics is a commercially available and reliable technology with significant potential for long-term growth in nearly all global regions. Several research institutes and companies are working on recycling concepts for thin film modules and modules with crystalline cells. The establishment of recycling and reuse technologies appropriate and applicable to all photovoltaics (PV) modules is a key issue to be addressed as part...
-
Wpływ wody i udaru na właściwości mechaniczne nowoczesnych kompozytów polimerowych dla okrętownictwa
PublikacjaZbadano zachowanie dwóch kompozytów warstwowych hybrydowych o wzmocnieniu aramidowo-szklanym w osnowie winyloestrowej i epoksydowej, w stanie suchym i po nasyceniu wodą. Materiały te badano ze względu na zastosowanie w okrętownictwie i interesujące właściwości włókien aramidowych - lżejsze od włókien węglowych, niezwykle odporne na przebicie przy udarze i ścieranie, ale jednocześnie bardzo drogie (ok. 200 zł/m2) i higroskopijne....
-
PRZEGLĄD KONSTRUKCJI WARSTWOWYCH
PublikacjaArtykuł przedstawia konstrukcje warstwowe typu SPS (Sandwich Plate System), SIP (Structural Insulated Panels) oraz hybrydowe (laminaty metalowo-włókniste FML) a także ich budowę, właściwości oraz wykorzystanie w różnych sektorach przemysłu.
-
Multiparameter sensitivity analysis of a GFRP composite footbridge of a sandwich structure and U-shaped cross-section
PublikacjaThe paper deals with multiparameter sensitivity analysis of a composite footbridge. A shell‐like structure is 14.5 m long shows U‐shaped cross‐section and inner service dimensions 1.3 × 2.5 m. Glass fiber reinforced polymer GFRP laminate constitutes faces of a sandwich structure while PET foam received from recycled bottle builts a core. The structure was divided into 285 independent areas where the thickness of laminates and stiffness...
-
Ireneusz Kreja dr hab. inż.
OsobyAbsolwent klasy matematycznej I Liceum Ogólnokształcącego w Gdańsku im. Mikołaja Kopernika (1974). Absolwent Wydziału Budownictwa Lądowego Politechniki Gdańskiej (1979). Od 1979 pracuje na PG. W 1989 uzyskał doktorat (z wyróżnieniem), na Wydziale Budownictwa Lądowego, a w 2008 habilitował się (również z wyróżnieniem) na Wydziale Inżynierii Lądowej i Środowiska PG. Od 2011 jest profesorem PG. Na Politechnice Gdańskiej pełnił funkcje:...
-
Wpływ sposobu wytwarzania na właściwości warstwowych kompozytów polimerowych w środowisku wodnym
PublikacjaPrzedstawiono wyniki badań wytrzymałości na zginanie, ściskanie i dynamicznych charakterystyk absorpcji energii udaru o niskiej energii kompozytów epoksydowych wzmocnionych 10 warstwami tkaniny aramidowo-szklanej, utwardzonych w próżni (worek próżniowy) lub na powietrzu. Badano próbki w stanie suchym i po nasyceniu wodą. Stwierdzono znaczną degradację właściwości obu materiałów w stanie mokrym. Laminaty utwardzane w powietrzu wykazały...
-
Porównanie wybranych modeli delaminacji w kompozytach warstwowych
PublikacjaW artykule zaprezentowano oraz porównano metody modelowania delaminacji w materiałach kompozytowych. Dokonano porównania trzech modeli: modelu izotropowego opartego o kryterium uszkodzenia Hashin'a, modelu wynikającego z analizy wzrostu szczeliny powstającej pomiędzy warstwami laminatu, oraz modelu kinematycznego, w którym uszkodzenie zamodelowano kilkoma elementami skończonymi. W artykule poruszono również problem modelowania...
-
Quality assessments of electrochromic devices: the possibleuse of 1/f current noise
PublikacjaElementy wykorzystujące zjawisko elektrochromizmu, potrafiące zmieniać przezroczystość za pomocą ładowania/rozładowania ładunkiem elektrycznym, wykonano na bazie laminatów pokrytych porowatą strukturą tlenków Ni oraz tlenków Wi-V. Oba laminaty, na które naniesiono przewodzącą warstwę In2O3, przedzielono warstwą elektrolitu. Obserwowano szumy typu 1/f w prądzie I płynącym w trakcie rozładowywania urządzenia. Gęstość widmowa mocy...
-
Three-point bending test of sandwich beams supporting the GFRP footbridge design process - validation
PublikacjaSome selected aspects concerning material and construction design issues for pedestrian footbridge made of GFRP composite materials are elaborated in this paper. The analysis is focused on validation tests, which are particularly important because of the advanced technology and materials that are used for this innovative bridge. The considered footbridge is a sandwich-type shell structure comprising of PET foam core and outer skins...
-
Architectural and Urban Planning Solutions for the Protection of Heritage Buildings in the Context of Terrorist Attacks: Following the Example of Passive Protection Systems
PublikacjaEvents in recent years showing numerous terrorist attacks raise awareness regarding the neces-sity of considering the safety of heritage buildings. The analysis of available data allows us to conclude that it is not possible to fully prevent terrorist attacks. On the other hand, it is possible to minimize the impact of such incidents through proper design of Passive Protection System (PPS) components. One possible architectural...
-
Budowa stanowiska do rejestracji różnicy koloru żelkotu eksploatowanego w środowisku wodnym
PublikacjaW artykule przedstawiono rozważania na temat budowy stanowiska do oceny różnicy kolorów ΔE laminatów z żelkotem po ekspozycji w środowisku wodnym. Przedstawiono dobór parametrów badania koloru metodą różnicową za pomocą układu oświetleniowego i aparatu fotograficznego. Przedstawiono wyniki pomiaru różnicy koloru w czasie dla laminatów epoksydowo szklanych w środowisku wodnym o zróżnicowanej temperaturze.
-
Low velocity impact damage in glass/polyester composite sandwich panels
PublikacjaZbadano odporność udarową konstrukcji przekładkowych z laminatu poliestrowo szklanego pod kątem adhezji z rdzeniem (pianki PVC) przy polaczeniu dwoma rodzajami kleju lub łączanymi na ''mokro'' przy pomocy żywicy w trakcie utwardzania laminatu. Do oceny obszaru zniszczeń udarowych zastosowano metodę ultradźwiękową, która umożliwia wykrycie pola delaminacji nakładających się na siebie w poszczególnych warstwach .Obszary zniszczeń...