Filters
total: 2324
filtered: 2153
displaying 1000 best results Help
Search results for: MULTI-DOMAIN RECOMMENDATIONS
-
A New Phenylalanine Derivative Acts as an Antagonist at the AMPA Receptor GluA2 and Introduces Partial Domain Closure: Synthesis, Resolution, Pharmacology, and Crystal Structure
Publication -
Multi-objective optimization of tool wear, surface roughness, and material removal rate in finishing honing processes using adaptive neural fuzzy inference systems
PublicationHoning processes are usually employed to manufacture combustion engine cylinders and hydraulic cylinders. A crosshatch pattern is obtained that favors the oil flow. In this paper, Adaptive Neural Fuzzy Inference System (ANFIS) models were obtained for tool wear, average roughness Ra, cylindricity and material removal rate in finish honing processes. In addition, multi-objective optimization with the desirability function method...
-
Pounding Between Superstructure Segments in Multi-Supported Elevated Bridge with Three-Span Continuous Deck Under 3D Non-Uniform Earthquake Excitation
PublicationReports after severe ground motions show that the earthquake-induced structural pounding may lead to significant damage in elevated bridges. The aim of this paper is to analyse pounding between superstructure segments of a highway elevated bridge with three-span continuous deck under 3D non-uniform earthquake excitation, which is induced by spatial seismic effects related to the propagation of seismic wave. The conditional stochastic...
-
Opportunistic tri-band carrier aggregation in licensed spectrum for multi-operator 5G hetnet
Publication -
Comparison of Mathematical Models of Torque Transmitted by Multi-disc Wet Clutch with Experimental Results
PublicationIn this article was described the methodology for the experimental study of flows in the prototype of a satellite hydraulic motor with a rotating body. The experimental tests of the motor were carried out at a low constant rotational speed in a wide range of pressure drop in this motor. The constant rotational speed of the motor was kept by a worm gear. Based on the test results, the leakage characteristics in the flat gaps of...
-
Application a laboratory stand for multi-symptoms tests for high cyclic fatigue of constructional material
PublicationThis paper describes a need of diagnostics present ship plants according to current technical state. In order to reach competent physical quantity describing fatigue of materials by congregated energy. This paper describes using some diagnostics methods (acoustic emission AE, vibration, thermovision, deformation) in order to definition fatigue state of construction material. The author tries to find correlation between measured...
-
Multi-agent large-scale parallel crowd simulation with NVRAM-based distributed cache
PublicationThis paper presents the architecture, main components and performance results for a parallel and modu-lar agent-based environment aimed at crowd simulation. The environment allows to simulate thousandsor more agents on maps of square kilometers or more, features a modular design and incorporates non-volatile RAM (NVRAM) with a fail-safe mode that can be activated to allow to continue computationsfrom a recently analyzed state in...
-
Accelerated multi-objective design of miniaturized microwave components by means of nested kriging surrogates
PublicationDesign of microwave components is an inherently multiobjective task. Often, the objectives are at least partially conflicting and the designer has to work out a suitable compromise. In practice, generating the best possible trade‐off designs requires multiobjective optimization, which is a computationally demanding task. If the structure of interest is evaluated through full‐wave electromagnetic (EM) analysis, the employment of...
-
Multi-Aspect Quality Assessment Of Mobile Image Classifiers For Companion Applications In The Publishing Sector
PublicationThe paper presents the problem of quality assessment of image classifiers used in mobile phones for complimentary companion applications. The advantages of using this kind of applications have been described and a Narrator on Demand (NoD) functionality has been described as one of the examples, where the application plays an audio file related to a book page that is physically in front of the phone's camera. For such a NoD application,...
-
Board cross-section errors while sawing on twin shaft multi-rip saws
PublicationW pracy przedstawiono wpływ warunków pracy pił na powstawanie błędów przecinania w postaci uskoku na przekroju poprzecznym tarcicy.
-
Distributed protection against non-cooperative node behavior in multi-hop wireless networks
PublicationAn important security problem in today's distributed data networks is the prevention of non-cooperative behavior i.e., attacks consisting in the modification of standard node operation to gain unfair advantage over other system nodes. Such a behavior is currently feasible in many types of computer networks whose communication protocols are designed to maximize the network performance assuming full node cooperation. Moreover, it...
-
Seismic pounding behavior of multi-story buildings in series considering the effect of infill panels
PublicationThe aim of the present paper is to study the influence of the infill panels on the seismic pounding response of adjacent structures in series. The contribution of the masonry infill has been simulated using equivalent diagonal compression struts. Steel frames have been assumed to have elastic-plastic behavior with 1% linear strain hardening. The dynamic contact analysis has been utilized where contact surface model (target and...
-
Monitoring of essential and toxic elements in multi-ingredient food supplements produced in European Union
Publication -
Kinetic flux vector splitting scheme for solving non-reactive multi-component flows
Publication -
Multi-Criteria Simulation-Optimization Analysis of Usage of Automated Parcel Lockers: A Practical Approach
Publication -
Robots for Elderly Care: Review, Multi-Criteria Optimization Model and Qualitative Case Study
Publication -
Multi-objective electric distribution network reconfiguration solution using runner-root algorithm
Publication -
Maximization of multicast periodic traffic throughput in multi-hop wireless networks with broadcast transmissions
Publication -
Throughput vs. Resilience in Multi-hop Wireless Sensor Networks with Periodic Packet Traffic
Publication -
EU Multi-Annual Financial Framework in the Perspective of 2021–2027. Assumptions and Area of Changes
Publication -
Pareto Optimal Decisions in Multi-Criteria Decision Making Explained with Construction Cost Cases
Publication -
MIX2: A Novel Natural Multi-Component Modulator of Multidrug-Resistance and Hallmarks of Cancer Cells
Publication -
Performance assessment of OpenMP constructs and benchmarks using modern compilers and multi-core CPUs
PublicationConsidering ongoing developments of both modern CPUs, especially in the context of increasing numbers of cores, cache memory and architectures as well as compilers there is a constant need for benchmarking representative and frequently run workloads. The key metric is speed-up as the computational power of modern CPUs stems mainly from using multiple cores. In this paper, we show and discuss results from running codes such as:...
-
Adaptive Sampling for Non-intrusive Reduced Order Models Using Multi-Task Variance
PublicationNon-intrusive reduced order modeling methods (ROMs) have become increasingly popular for science and engineering applications such as predicting the field-based solutions for aerodynamic flows. A large sample size is, however, required to train the models for global accuracy. In this paper, a novel adaptive sampling strategy is introduced for these models that uses field-based uncertainty as a sampling metric. The strategy uses...
-
Comparative studies of manufacturing strategies within multi-machine production systems using simulation
PublicationZaprezentowano metodykę budowy struktur przestrzennych systemów produkcji typu gniazdowego wg zasad technologii grupowej, wykorzystując zaproponowane modele i algorytmy analizy zbiorów/relacji rozmytych. Generowane, z wykorzystaniem tych algorytmów, przebiegi procesów porównywano z przebiegami procesów w strukturach przestrzennych typu hybrydowego, tj. o wspólnych zasobach. Odnosząc się do zdefiniowanego studium przypadku, wykazano...
-
Transfer of charging information between exchanges of different network operators in multi-provider environment.
PublicationW pracy przedstawiono różne konfiguracje systemów taryfikacji i zaliczania w środowisku zdemonopolizowanym. Przeanalizowano różne opcje przepływu danych w takim środowisku i omówiono rozszerzenie sygnalizacji SS7, która jest opracowana przez ETSI i wykorzystywana dla aplikacji zaliczania.
-
Broadband/Dual-band Metal-Mountable UHF RFID Tag Antennas: A Systematic Review. Taxonomy Analysis, Standards of Seamless RFID System Operation, Supporting IoT implementations, Recommendations and Future Directions
PublicationThe employment of broadband/dual-band ultra-high frequency (UHF) radio frequency identification (RFID) tag antennas contributes to the growth of RFID technology, with many potential implications, such as the increase of international trade, and reducing costs thereof. This study presents all reported articles on RFID tags for metal objects that can work seamlessly across different countries. Moreover, it addresses all available...
-
Multi-residue method for the determination of 16 recently used pesticides from various chemical groups in aqueous samples by using DI - SPME coupled with GC-MS
PublicationA simple and solvent-free multi-residue method has been optimized to determine 16 currently used pesticides from different chemical groups in aqueous samples. The extraction of analytes was carried out with direct immersion solid-phase microextraction (DI-SPME) and for the identification and quantitative determination gas chromatography coupled with mass spectrometry (GC-MS) was applied. Two commonly used adsorbent coatings have...
-
Analysis of electrochemical parameters in time domain during the passive layer cracking occurring on the 304L stainless steel in chlorides solution under tensile stresses
Publication -
Analysis of electrochemical parameters in time domain during the passive layer cracking occurring on the 304L stainless steel in chlorides solution under tensile stresses.
PublicationDynamiczna Elektrochemiczna Spektroskopia Impedancyjna została wykorzystana do szczegółowej analizy zakresu przejścia stan pasywny - stan aktywny podczas procesu pękania warstwy pasywnej. Wpływ potencjału oraz naprężeń mechanicznych na niszczenie warstwy ochronnej występującej na stali 304L w środowisku 0.5M NaCl w pokojowej temperaturze został przestudiowany. Praca prezentuje chwilowe widma impedancyjne uzyskane przy różnych warunkach...
-
Multi-functional sensor based on photonic crystal fiber using plasmonic material and magnetic fluid
PublicationA unique highly sensitive photonic crystal fiber is investigated based on plasmonic material and magnetic fluid (MF) for the simultaneous measurement of temperature and magnetic field sensor. The designed sensor is explored by tracing the different parameters such as birefringence, coupling length, power spectrum, and the peak wavelength of the transmission intensity. The magnetic field and temperature computation are attained...
-
Novel Interpolation Method of Multi-DFT-Bins for Frequency Estimation of Signal with Parameter Step Change
PublicationThe IpDFT(Interpolation Discrete Fourier Trans-form) method is one of the most commonly used non-parametric methods. However, when a parameter (frequency, amplitude or phase) step changes in the DFT period, the DFT coefficients will be distorted seriously, resulting in the large estimation error of the IpDFT method. Hence, it is a key challenge to find an IpDFT method, which not only can eliminate the effect of the step-changed...
-
Multi-layer graphene oxide alone and in a composite with nanosilica: Preparation and interactions with polar and nonpolar adsorbates
Publication -
<title>Multi-cavity complex controller with vector simulator for TESLA technology linear accelerator</title>
Publication -
Non-destructive testing of industrial structures with the use of multi-camera Digital Image Correlation method
Publication -
Multi-sensor monitoring of the corrosion rate and the assessment of the efficiency of a corrosion inhibitor in utility water installations
Publication -
Optical sensor of a person sitting on a chair and dressed in multi-layered clothes vital signs monitoring
PublicationAn optoelectronic device enhancing a smart chair functionality is presented in the paper. Its essential purpose is a detection of a sitting person presence on the chair by means of detecting the vital signs. Additionally, it could be used for determining of clothes layer parameters useful in adjusting a system of a capacitive electrocardiography.
-
MULTI-CRITERIA COMPARATIVE ANALYSIS OF THE USE OF SUBTRACTIVE AND ADDITIVE TECHNOLOGIES IN THE MANUFACTURING OF OFFSHORE MACHINERY COMPONENTS
PublicationThe dynamic development of additive manufacturing technologies, especially over the last few years, has increased the range of possible industrial applications of 3D printed elements. This is a consequence of the distinct advantages of additive techniques, which include the possibility of improving the mechanical strength of products and shortening lead times. Offshore industry is one of these promising areas for the application...
-
Determinants of COVID-19 Impact on the Private Sector: A Multi-Country Analysis Based on Survey Data
PublicationOur paper aims to investigate the impact of COVID‐19 on private sector companies in terms of sales, production, finance and employment. We check whether the country and industry in which companies operate, government financial support and loan access matter to the behaviour and performances of companies during the pandemic. We use a microdata set from a worldwide survey of more than 15,729 companies conducted between April and...
-
Multi-objective optimization of the cavitation generation unit structure of an advanced rotational hydrodynamic cavitation reactor
PublicationHydrodynamic cavitation (HC) has been widely considered a promising technique for industrial-scale process intensifications. The effectiveness of HC is determined by the performance of hydrodynamic cavitation reactors (HCRs). The advanced rotational HCRs (ARHCRs) proposed recently have shown superior performance in various applications, while the research on the structural optimization is still absent. The present study, for the...
-
Investigations of operational driving loads of bucket chains and manoeuvre hoisting winches on multi-bucket dredgers
PublicationArtykuł dotyczy zagadnień wstępnego projektowania siłowni pogłębiarek wieloczerpakowych. Niniejszy artykuł przedstawia wyniki badań eksploatacyjnych sześciu pogłębiarek wieloczerpakowych. Badania eksploatacyjne obejmowały pomiary parametrów charakteryzujących warunki pracy dwóch podstawowych głównych odbiorników energii mechanicznej na pogłębiarkach wieloczerpakowych a mianowicie łańcuchów czerpakowych i zespołu wciągarek manewrowych....
-
Environmental risk- based ranking of solvents by the combination of multimedia model and multi-criteria decision analysis
PublicationA novel procedure for assessing the environmental risk related to solvents emissions has been developed. The assessment of risk is based on hazard and exposure detailed investigations. The potential exposure related to different environmental phases is calculated with basic multimedia model, that gives the percentage distribution of solvent in environmental compartments as a result. Specific hazards– toxicological, environmental...
-
Positional Scanning Identifies the Molecular Determinants of a High Affinity Multi-Leucine Inhibitor for Furin and PACE4
Publication -
Investigation of active channels in multi-channel surface arm EMG recordings for 24 different movements
Publication -
Design of a SiC based triple active bridge ceil for a multi-megawatt DC-DC converter
PublicationThe paper describes the design methodology of a novel Triple Active Bridge cell used as the building block for modular DC-DC converters. The intended application is for Medium Voltage Direct Current grids, such as the DC collector for offshore wind farms. The latest generation of SiC MOSFET semiconductors is utilized to operate in the medium frequency range while optimizing the efficiency. The dimensioning of the main cell components,...
-
Estimating of the rough green target size in lumber manufacturing on the twin shaft multi-rip saws
PublicationW pracy przedstawiono analizę i wyniki badań doświadczalnych dokładności przecinania pryzm ze zmrożonego drewna brzozowego na dwuwrzecionowej pilarce tarczowej w warunkach przemysłowych. W badaniach wykorzystywano piły typu "Multix" oraz piły nowego typu. Ponadto, wykazano, że obecność w przekroju poprzecznym, zmiennego na długości przecinanej deski, stopnia po obu jej stronach ma znaczny wpływ na szacowanie wymiaru początkowego...
-
‘Green’ multi - residue methods for the determination of high importance currently used pesticides in environmental samples
PublicationThe purpose of the research has been to develop and apply ‘green’ analytical methodologies to control and monitor the level of currently used pesticides from different chemical groups in aqueous samples. For extraction of analytes solid - phase microextraction (SPME) and dispersive liquid - liquid microextraction (DLLME) have been applied and compared. For SPME, commonly used materials for coating fibers include: polydimethylsiloxane...
-
Behaviour of Colliding Multi-Storey Buildings under Earthquake Excitation Considering Soil-Structure Interaction
PublicationThis paper investigates the coupled effect of the supporting soil flexibility and pounding between neighbouring, insufficiently separated buildings under earthquake excitation. Two adjacent three-storey structures, modelled as inelastic lumped mass systems with different structural characteristics, have been considered in the study. The models have been excited using the time history of the Kobe earthquake of 1995. A nonlinear...
-
Electrohydrodynamic Secondary Flow and Particle Collection Efficiency in Spike-Plate Multi-Electrode Electrostatic Precipitator
PublicationIn this work the results of electrohydrodynamic (EHD) secondary flowmeasurements in a spike-plate type electrostatic precipitator (ESP) are presented. In the investigated ESP two-sided and one-sided spike electrodes were used as a discharge electrodes. The results of 2D PIVmeasurements showed that flow pattern obtained for a different spike tips positions in respect to the primary flow direction significantly changing the flow...
-
Impact of Movement Tempo Distribution on Bar Velocity During a Multi-Set Bench Press Exercise
Publication