Filters
total: 1867
filtered: 1801
displaying 1000 best results Help
Search results for: COMPARISON
-
Numerical Comparison of Damping Amplification Effects Obtained in Neighborhood of a Mechanism Singular Position - Viscous and Electromagnetic Cases
PublicationIn the paper, results of numerical investigations are presented. A continuous beam is considered as the main vibrating element. Two energy dissipations methods are compared: viscous dampers and DC generators. To increase the damping effectiveness, velocity amplification is proposed, i.e., a mechanism is introduced between the beam and the damping element, and the mechanism configuration is set as closed to the singular position...
-
Elimination of impulsive disturbances from archive audio files – comparison of three noise pulse detection schemes
PublicationThe problem of elimination of impulsive disturbances (such as clicks, pops, ticks, crackles, and record scratches) from archive audio recordings is considered and solved using autoregressive modeling. Three classical noise pulse detection schemes are examined and compared: the approach based on open-loop multi-step-ahead signal prediction, the approach based on decision-feedback signal prediction, and the double threshold approach,...
-
Comparison of the content of phenolic compounds and antioxidant activity of white, red and black currants (Ribes sp.) extracts
PublicationThe aim of this study was to compare the content of antioxidant compounds and the antioxidant activity of extracts from white, red and black currants (Ribes sp.). The chemical properties verified included determinations of anthocyanins and other phenols by HPLC-DAD-MS, total antioxidant activity by standard spectrophotometric tests (ABTS, DPPH and FCR), and profiles of antioxidants by TLC with visualization reagents (ABTS, DPPH,...
-
Increase of the effective energy from the radiant tube equipped with regenerative system in comparison with conventional recuperative system
PublicationPrzedstawiono wyniki badań eksperymentalnych spalania HiTAC (High Temperature Air Combustion) z użyciem rury promieniującej w celu porównania systemu palników regeneracyjnych z konwencjonalnym systemem rekuperacyjnym.
-
Comparison of 2D and 3D culture models in the studies of the biological response induced by unsymmetrical bisacridines in cancer cells
PublicationMulticellular tumor spheroids are a good tool for testing new anticancer drugs, including those that may target cancer stem cells (CSCs), responsible for cancer progression, metastasis, and recurrence. Therefore, following the initial evaluation of the impact of antitumor unsymmetrical bisacridines (UAs) on lung and colon cancer cells using traditional monolayer cultures, I extended my investigations and applied the spherical model....
-
COMPARISON OF PREDICTIVE METHODS FOR FLOW BOILING HEAT TRANSFER IN CONVENTIONAL CHANNELS AND MINICHANNELS – THE EFFECT OF REDUCED PRESSURE
PublicationIn the paper are presented the results of follow on studies from [1]–[3] using authors own model to predict heat transfer coefficient during flow boiling. The model has been tested against a large selection of experimental data collected from various researchers to investigate the sensitivity of the in-house developed model. The collected experimental data came from various studies from literature and were conducted for the full...
-
Comparison of predictive methods for flow boiling heat transfer in conventional channels and minichannels - the effect of reduced pressure
PublicationIn the paper are presented the results of follow on studies from [1]–[3] using authors own model to predict heat transfer coefficient during flow boiling. The model has been tested against a large selection of experimental data collected from various researchers to investigate the sensitivity of the in-house developed model. The collected experimental data came from various studies from literature and were conducted for the full...
-
Comparison of selected parametric methods for prediction of inland waterways ship hull resistance in towing tank test
PublicationIn the paper selected approximate methods for calculation of inland waterways ship resistance and their verification by towing tests, compared on the example of a small urban ferry, are presented. The test results are made for both the bare hull and the hull with appendages (skeg, azimuthal propeller). Significant differences between results of the theoretical methods and experimental ones, especially in the case of the model with...
-
Comparison of the paracetamol electrochemical determination using boron-doped diamond electrode and boron-doped carbon nanowalls
PublicationTwo different type of electrodes, boron-doped diamond electrode (BDD) and boron-doped carbon nanowalls (B:CNW) electrode, were used for the electrochemical determination of paracetamol using the cyclic voltammetry and the differential pulse voltammetry in phosphate buffered saline, pH = 7.0. The main advantage of these electrodes is their utilization without any additional modification of the electrode surface. The peak current...
-
Comparison of two intravascular access techniques when using CBRN-PPE: A randomized crossover manikin trial
Publication -
Suppression of the High-Frequency Errors in Surface Topography Measurements Based on Comparison of Various Spline Filtering Methods
Publication -
Catalytic activity and anion activation in SN2 reactions promoted by complexes of silicon polypodands. Comparison with traditional polyethers
Publication -
Comparison of Chemical Composition and Colour Parameters of Different Mentha Genus Plants Grown under Organic Conditions
Publication -
A Comparison of the Prevalence of Gastrointestinal Parasites in Wild Boar (Sus scrofa L.) Foraging in Urban and Suburban Areas
Publication -
Comparison of radical-driven technologies applied for paraben mixture degradation: mechanism, biodegradability, toxicity and cost assessment
Publication -
A Comparison of Gaseous Emissions from a Hybrid Vehicle and a Non-Hybrid Vehicle under Real Driving Conditions
Publication -
Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies
Publication -
Extraction Methods of 10-Deacetylbaccatin III, Paclitaxel, and Cephalomannine from Taxus baccata L. Twigs: A Comparison
Publication -
The comparison of vodka, whisky and moonshine by using the electronic nose based on the technology of ultra-fast gas chromatography
PublicationVodka andwhisky are produced fromgrain distillates. Formerly these alcohols were very often counterfeited, by the made in home conditions spirit drink called moonshine, which is obtained by distilling a mash from the alcoholic fermentation. This study presents research aimed at checking the usefulness of the electronic nose using ultra-fast gas chromatography for the differentiation of whisky, vodka and moonshine. 12 samples of...
-
The comparison of vodka, whisky and moonshine by using the electronic nose based on the technology of ultra-fast gas chromatography
PublicationVodka andwhisky are produced fromgrain distillates. Formerly these alcohols were very often counterfeited, by the made in home conditions spirit drink called moonshine, which is obtained by distilling a mash from the alcoholic fermentation. This study presents research aimed at checking the usefulness of the electronic nose using ultra-fast gas chromatography for the differentiation of whisky, vodka and moonshine. 12 samples of...
-
Comparison of heat transfer characteristics in surface cooling using microjets with water, ethanol and HFE7100 as test fluids
PublicationAccurate control of cooling parameters is required in ever wider range of technical applications. It is known that reducing the dimensions of the size of nozzle leads to an increase in the economy of cooling and improves its quality. Present study describes research related to the design and construction of the nozzles and microjet study, which may be applied in many technical applications such as in metallurgy, electronics, etc....
-
Low-energy positron scattering from gas-phase tetrahydrofuran: A quantum treatment of the dynamics and a comparison with experiments
PublicationIn this paper we report new quantum calculations of the dynamics for low-energy positrons interacting with gaseous molecules of tetrahydrofuran. The new quantum scattering cross sections are differential and integral cross sections at collision energies between 1.0 and 25.0 eV and include a careful treatment of the additional effects on the scattering process brought about by the permanent dipole moment of the target molecule....
-
Low-energy positron scattering from gas-phase pyrimidine: A quantum treatment of the dynamics and a comparison with experiments
PublicationWe are reporting detailed quantum scattering calculations that describe the diffusion of a beam of low-energy positrons interacting with the pyrimidine target as a gas-phase partner. The calculations have employed an essentially ab initio model for the short-range correlation interaction and for the electrostatic interaction of an impinging positron and the electron+nuclear structure of the target molecule at its equilibrium geometry.
-
Tilting pad thrust bearing with novel material selection - experimental comparison of low and medium speed operation
PublicationThe advances in material engineering led to the development of hard carbon based coatings applied in numerous applications in order to prevent or minimize wear of the parts in contact. With Triondur® coatings, the bearing company Schaeffler has succeeded in halving the friction losses in the valve trains of passenger cars. The coatings are optimized for high abrasive wear protection and low sliding friction moments. Altogether...
-
TRANSPORT POSSIBILITY FOR MPEG-4/AVC- AND MPEG-2-ENCODED VIDEO DATA IN IPTV: A COMPARISON STUDY
PublicationIPTV (Television over IP) is a modern service with a great potential to expand. It uses the IP transport platform, that is already in worldwide operation. At the time of writing, two techniques are used to transport the video and audio data of IPTV: MPEG-2 TS and Native RTP. The two techniques quite definitely have an influence on both quality of service (QoS) and quality of experience (QoE). This paper sets out to demonstrate...
-
Multicultural coastal cities: what are the differences in culture of urban planning management. Comparison analysis of Gdańsk and Gdynia
PublicationThe goal of this book chapter is the analysis of the multiculturalism of the seaside cities (Gdansk and Gdynia). We define multiculturalism by ethnic aspects, as concentration of multiple nationalities and ethnic groups over the given area and non ethnic aspects, as occurrence of multiple symbols, signs or cultures. We sense multiculturalism of the cities through the cultural and social properties of the citizens and urban architecture....
-
Comparison of bacterial production in the water column between two Arctic fjords, Hornsund and Kongsfjorden (West Spitsbergen)
PublicationBacterial production and the accompanying environmental factors were measured in the water columns of two Arctic fjords during the cruise in July and August 2013. Water samples were collected at six stations located in the central part of Hornsund and Kongsfjorden. In Hornsund, where average water temperatures were 1.25-fold lower than in Kongsfjorden, the bacterial production was twice as high (0.116 ± 0.102 vs 0.05 ± 0.03 mg...
-
Surface sliding in human abdominal wall numerical models: Comparison of single-surface and multi-surface composites
PublicationDetermining mechanical properties of abdominal soft tissues requires a coupled experimental-numerical study, but first an appropriate numerical model needs to be built. Precise modeling of human abdominal wall mechanics is difficult because of its complicated multi-layer composition and large variation between specimens. There are several approaches concerning simplification of numerical models, but it is unclear how far one could...
-
A comparison of indexing methods to evaluate quality of horticultural soils. Part II. sensitivity of soil microbiological indicators
Publication -
Comparison of selected clustering algorithms of raw data obtained by interferometric methods using artificial neural networks
Publication -
Comparison of antioxidative properties of raw vegetables and thermally processed ones using the conventional and sous-vide methods
Publication -
Comparison of ANN Classifier to the Neuro-Fuzzy System for Collusion Detection in the Tender Procedures of Road Construction Sector
Publication -
Are BBQs Significantly Polluting Air in Poland? A Simple Comparison of Barbecues vs. Domestic Stoves and Boilers Emissions
Publication -
Comparison of How Graphite and Shungite Affect Thermal, Mechanical, and Dielectric Properties of Dielectric Elastomer-Based Composites
Publication -
Excitation energy migration in uniaxially oriented polymer films: a comparison between strongly and weakly organized systems
PublicationMechanizm wieloetapowej migracji energii w osiowo rozciąganych foliach polimerowych jest analizowany w układach o silnej i słabej orientacji molekuł barwników umieszczonych w matrycach poliwinylowych. Porównanie tych różnie orientujących się układów bazuje na zjawisku depolaryzacji stężeniowej anizotropii emisji, symulacjach Monte Carlo i wartościach liniowego dichroizmu. Pokazano, że uporządkowanie momentów przejścia fluoroforów...
-
A Comparison of Model Calculations of Ice Thickness with the Observations on Small Water Bodies in Katowice Upland (Southern Poland)
Publication -
Comparison of Muscle Activity During 200 m Indoor Curve and Straight Sprinting in Elite Female Sprinters
Publication -
Amplifying dementia as a global public health problem: A cross-country comparison of the impact of COVID-19 pandemic
Publication -
A qualitative 5-country comparison of the perceived impacts of COVID-19 on people living with dementia and unpaid carers
Publication -
Comparison of antioxidant enzyme activities and DNA damage in chickpea (Cicer arietinum L.) genotypes exposed to vanadium
Publication -
Comparison of properties of magnetoacoustic emission and mechanical Barkhausen effects for P91 steel after plastic flow and creep
PublicationW artykule przedstawiono wyniki pogłębionej analizy sygnału szumowego efektu Barkhausena dla próbek ze stali krzemowej Fe-2%Si po deformacji plastycznej. Badane były próbki po walcowaniu na zimno powodującym odkształcenie względne w zakresie do 8%. Pierwsze podejście polegało na analizie w dziedzinie czasu widma badanego sygnału. Analiza ta została uzupełniona o analizę liczby zliczeń impulsów w funkcji napięcia progowego, zarówno...
-
Comparison of non-linear statical analysis of truss with linear and rotational side supports and 3d roof model
PublicationIn the paper geometrically non-linear analysis of example truss with linear and rotational elastic side supports is compared with geometrically non-linear analysis of part of the roof construction with purlins and truss-bracing. For different stiffness of side-supports a non linear relation between normal force in compressed chord due to out of truss plane displacement has been calculated.
-
Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies
PublicationPoly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) blends were compatibilized by reactive blending and by copolymers formed during reaction in the solution. The reactive blending of PCL/PLA was performed using di-(2-tert-butyl-peroxyisopropyl)benzene (BIB) or dicumyl peroxide (DCP) as radical initiator. PCL-g-PLA copolymers were prepared using 1.0 wt. % of DCP or BIB via reaction in solution, which was investigated through...
-
How Much Does an e-Vote Cost? Cost Comparison per Vote in Multichannel Elections in Estonia
PublicationWe are presenting the results of the CoDE project in this paper, where we investigate the costs per vote of different voting channels in Estonian Local Elections (2017). The elections analyzed involve different processes for casting a vote: Early Voting at County Centers, Advance Voting at County Centers, Advance Voting at Ordinary Voting District Committees, Electronic Voting, Election Day Voting, and Home Voting. Our analysis...
-
Nonlinear strain gradient and micromorphic one-dimensional elastic continua: Comparison through strong ellipticity conditions
PublicationWe discuss the strong ellipticity (SE) conditions for strain gradient and micromorphic continua considering them as an enhancement of a simple nonlinearly elastic material called in the following primary material. Recently both models are widely used for description of material behavior of beam-lattice metamaterials which may possess various types of material instabilities. We analyze how a possible loss of SE results in the behavior...
-
A new anisotropic bending model for nonlinear shells: Comparison with existing models and isogeometric finite element implementation
PublicationA new nonlinear hyperelastic bending model for shells formulated directly in surface form is presented, and compared to four existing prominent bending models. Through an essential set of elementary nonlinear bending test cases, the membrane and bending stresses of each model are examined analytically. Only the proposed bending model passes all the test cases, while the other bending models either fail or only pass the test cases for...
-
Joint foreign ownership and global value chains effects on productivity: a comparison of firms from Poland and Germany
PublicationPurpose The study aims to examine the joint effects of foreign ownership (FO) and involvement in global value chains (GVCs) on the productivity performance of firms from a catching-up country (Poland) and a leader economy (Germany). Design/methodology/approach The authors use micro-level data on firms combined with several sector-level GVC participation measures. The authors investigate whether the link between productivity and...
-
A multi‐industry and cross‐country comparison of technology contribution to formal and informal knowledge sharing processes for innovativeness
PublicationThe study explores the impact of organizational information technology (IT) competency on knowledge sharing, both explicit and tacit, in the context of innovativeness of products and processes. Knowledge sharing is then assessed in terms of tacit-to-explicit conversion and the impact of both types of knowledge on organizational innovation. Both process (internal) and product/service (external) innovation are included. As an extension,...
-
Comparison of continuous and discontinuous constitutive models to simulate concrete behaviour under mixed mode failure conditions
PublicationW artykule porównano modele MES ciągłe i nieciągłe do symulacji zachowania betonu w warunkach mieszanego zniszczenia. W ramach modeli ciągłych zastosowano modele sprężysto-plastyczne oraz modele z redukcją sztywności sprężystej i nielokalnym osłabieniem. W ramach modeli nieciągłych zastosowano XFEM. Przedmiotem obliczeń były strefy lokalizacji i rysy w warunkach mieszanego zniszczenia wg testu doświadczalnego Nooru-Mohameda.
-
Comparison of the exponential thermal transient parameterization methods with the SMTP method in the unipedicled DIEP flap computer modelling and simulation
PublicationThe aim of this paper is to compare the spatial contrast of the image descriptors obtained via three different thermal transient parameterization methods in Active Dynamic Thermography. The thermal constants and amplitude values of the one- and two- exponential parametrization are compared to the Simplified Magnitude-Temporal Parametrization method (SMTP). The comparison is performed using the data obtained by simulating the cold...