Search
Filters
total: 1075
filtered: 858
Search results for: TECHNICAL SYSTEMS
-
Current risk analysis and management issues in technical systems.
PublicationDealing with the reliability and safety of industrial hazardous plants requires taking into account relevant interdisciplinary scientific knowledge and some existing approaches based on so-called good engineering practice, also those included in the international standards and guidelines. In this article an approach is proposed how to integrate the functional safety concept with information security aspects in the design and management...
-
Semantic Analysis and Text Summarization in Socio-Technical Systems
PublicationIn this chapter the authors present the results of the development the methodology for increasing the reliability of the functioning of the Socio-Technical System. The existed methods and algorithms for processing unstructured (textual) information were studied. Taking into account noted above strengths and weaknesses of Discriminant and Probabilistic approaches of Latent Semantic Relations analysis in of the summarization projection...
-
Operation of technical systems as the index of reliability and safety ofthem
PublicationPrzedstawiono propozycję ilościowej interpretacji działania systemów technicznych, która jest rozpatrywana jako wielkość fizyczna z jednostką miary zwaną dżulosekundą [dżulxsekunda]. Wykazane zostanie też, że taka interpretacja działania może być uznana za wskaźnik niezawodności, a w szczególnych przypadkach - wskaźnik bezpieczeństwa funkcjonowania takiego sytemu. Do uzasadnienia takiej przydatności wspomnianego działania silnika...
-
Decision-Making Models of the Human-Operator as an Element of the Socio-Technical Systems
PublicationThe authors of the chapter proved that the fundamental intellectual processes, which lie on the basis of decision-making behavior of the human-operator, could be identified on the bases on the analogies with the devices (elements). The basic intellectual processes of the Rational decision-making models can be adequately identified by the transient processes of the PID-controller; the intellectual processes of the Bounded Rationality...
-
Proposal of the interpretation of technical systems operation to determine their safety and reliability indices.
PublicationW artykule zaproponowano interpretację wartościującą działania, które (podobnie jak przedstawione w fizyce działania Hamiltona i Maupertiusa oraz działanie wynikające ze zmiany pędu ciała) jest rozpatrywane jako wielkość fizyczna o jednostce miary zwanej dżulosekundą [dżulsekunda]. Przedstawiono oryginalna metodę analizy i oceny działania systemu technicznego z uwzględnieniem jego niezawodności i bezpieczeństwa funkcjonowania....
-
Remote monitoring and control of technical systems using internet network technology
PublicationPoruszono problem monitorowania stanu rozproszonych obiektów echnicznych. Przedstawiono możliwości zastosowania do tego celu technologii sieci Internet i rodziny protokołów TCP/IP. Omówiono koncepcję wykorzystania takich standardów jak: TCP, UDP, HTTP, SNMP oraz języków programowania Java i PHP. Zwrócono uwagę na aspekty bezpieczeństwa sieciowego. Przedstawiono przykład realizacji dużego systemu zdalnego zarządzania systemem central...
-
Current challenges and methodological issues of functional safety and security management in hazardous technical systems
PublicationCelem artykułu jest zidentyfikowanie problemów oceny ryzyka w kontekście stosowania systemów elektrycznych / elektronicznych / programowalnych elektronicznych (E/E/PE) z uwzględnieniem aspektów bezpieczeństwa funkcjonalnego i zabezpieczeń (ochrony). Zadaniem rozwiązań bezpieczeństwa funkcjonalnego jest efektywne redukowanie ryzyka wychodząc z poziomu nieakceptowanego. Ryzyko jest definiowane jako kombinacja prawdopodobieństwa wystąpienia...
-
The use of spectrometric diagnostics in identification of the technical condition of tribological systems
PublicationThe paper presents, as an effect of the analysis of investigation results, a possibility of using the spectrometric diagnostics in the tribological system technical condition supervision arrangement. A model, based on the emission of solid particles in tribological system operation, allows to identify the system technical condition. After the analysis of tests carried out with the use of that model, it has been found that the content...
-
Solving the Problem of Dynamic Adaptability of Artificial Intelligence Systems that Control Dynamic Technical Objects
PublicationThis paper investigates the increase in the response speed and stability of artificial intelligence systems that control dynamic technical objects. The problem of calculating the optimal time of switching an artificial intelligence system between software classes by the criterion of the rigidity degree of the model of a control object is considered. The solution of this problem is proposed for the general case of the control object...
-
Issue of changes in technical states of a diesel engiene as the result of wear of its tribological systems
PublicationWskazano na konieczność rozpatrywania procesów obciążeń i zużywania układów tribologicznych silników o zapłonie samoczynnym (a zatem również zmiany ich stanów) w warunkach rzeczywistych jako procesów losowych. Oznacza to, że matematycznymi modelami tych procesów mogą być funkcje losowe o argumencie, którym jest czas (t) i o wartościach, którymi są zmienne losowe takie jak obciążenia i zużycia poszczególnych układów tribologicznych....
-
Features of load and wear of main propulsion devices on sea-going ships with piston combustion engines and their impact on changes in technical states of the systems
PublicationThe paper presents the specificity of operation of propulsion systems of seagoing ships which causes the need to control the load on them, especially on their engines called main engines. The characteristics of the load on the propulsion systems, especially on the main engines as well as on the shaft lines and propellers driven by the engines, along with the process of wear in tribological joints (sliding tribological systems)...
-
Computerized control and protection systems in technical objects and installations = Komputerowe systemy sterowania i zabezpieczeń w obiektach oraz instalacjach technicznych
PublicationArtykuł przedstawia zagadnienia dotyczące systemów komputerowych sterowania i układów automatyki bezpieczeństwa. Rozwój automatyki i informatyki na przestrzeni ostatnich lat wymusił wprowadzenie szeregu nowych rozwiązań technicznych, dotyczących procesów sterowania i kontroli instalacji technicznych. Dąży się do automatyzacji kompleksowej instalacji technicznych, rozumianej, jako możliwość sterowania wszystkimi układami i urządzeniami...
-
Nuclear Co-generation: The Analysis of Technical Capabilities and Cost Estimates
PublicationThis paper presents a concept of the parallel connection of a nuclear power plant fitted to provide heat for district heating application, with the CHP and heat plants existing in the supply region, in this case with the heating systems of Wejherowo and Gdynia. Presented variant proposes to add heat to a nuclear power plant’s total output by supplying heat exchangers with the steam from bleeders of low pressure (LP) turbine stage...
-
A family of new generation miniaturized impedance analyzers for technical object diagnostics
PublicationThe paper presents the family of three analyzers allowing to measure impedance in range of 10 ohm<|Zx|<10 Gohm in a wide frequency range from 10 mHz up to 100 kHz. The most important features of the analyzers family are: miniaturization, low power consumption, low production cost, telemetric controlling and the use of impedance measurement method based on digital signal processing DSP. The miniaturization and other above mentioned...
-
COMPARATIVE ANALYSIS OF RESULTS OF APPLICATION OF MARKOV AND SEMI-MARKOV PROCESSES TO RELIABILITY MODELS OF MULTI-STATE TECHNICAL OBJECTS
PublicationDuring rational operation of technical objects and systems various operational decisions are made and decision-making process itself should be consisted in selecting that considered most favourable out of all possible to be taken. Choice of such decision is possible after taking into account many different information items but it never be completely correct without accounting for data and indices dealing with reliability. In...
-
The use of liquid crystal thermography TLC and particle image velocimetry PIV in selected technical applications
PublicationNowadays, the energy cost is very high and this problem is carried out to seek techniques for improvement of the aerothermal and thermal (heat flow) systems performances in different technical applications. The transient and steady-state techniques with liquid crystals for the surface temperature and heat transfer coefficient or Nusselt number distribution measurements have been developed. The flow pattern produced by transverse...
-
Assessment of technical condition and repair of steel structure elements on the example of fire damage in a warehouse building
PublicationThe paper analyses a case study on the structural assessment of warehouse building partially damaged by fire caused by external source (fire of lorries close to the building). The authors focus on the site investigations and laboratory test results prior to assessing actual condition of the structural elements. Both strengthening concept and repair procedure of a steel column are addressed here. A short literature survey in the...
-
Knowledge engineer – more than only technical position. The concept of knowledge engineering education at the Faculty of Management and Economics
PublicationOrganizational learning means an effective knowledge management. Management is nothing more than the constant decision-making. Therefore organizational learning must be seen through the prism of decisions taken at all levels. Unfortunately decisions are never taken within comfortable conditions. Decision maker suffers from a lack of any support. There is often a problem with human resources having right skills, sometimes they do...
-
Semi-Markovian models of the process of technical state changes of technical objects.
PublicationNajistotniejszym problemem eksploatacji wszystkich obiektów technicznych (urządzeń) jest problem racjonalnego (a zwłaszcza optymalnego) decyzyjnego sterowania procesem zmian stanów technicznych tych obiektów. Sterowanie takie może być realizowane w przypadku zastosowania między innymi modelu wspomnianego procesu zmian stanów. Mając to na uwadze, w opracowaniu tym przedstawiono formalny opis procesu eksploatacji obiektów technicznych...
-
On the safety of technical sphere.
PublicationTechnika daje nam dobra użyteczne i zarazem generuje rozmaite zagrożenia.Przedstawiono analizę tych zagrożeń na przykładzie ogólnie potraktowanego systemu realizacji potrzeb. Opisana została natura relacji występujących między tym systemem a otoczeniem oraz w jego wnętrzu. Dalej przedstawiono klasy modeli predykcji strat, które mogą powstać w wyniku uwolnienia się omawianych zagrożeń.
-
Durability evaluation of technical fabrics
PublicationA thorough examination of the influence of the conditions of use on the mechanical properties of technical fabrics is proposed. Laboratory experiments (uniaxial tensile, rheological, cyclic and biaxial tensile tests) have been conducted and the material’s parameters for Finite Element Method (FEM) simulations have been identified. Various constitutive models of technical fabrics are investigated and compared. On the basis of these...
-
Mechanical testing of technical woven fabrics
PublicationThis article presents a review of technical fabrics testing methods used by the authors on the basis of their experience with research on properties of polytetrefluoroethylene-coated fabrics used for Forest Opera in Sopot (Poland). First, the different types of testing methods used for description of mechanical properties (uniaxial tensile tests, biaxial tensile tests and shear tests) of technical woven fabrics are described. The...
-
Rheological Problems of Technical Fabirc
PublicationW pracy przedstawiono wyniki identyfikacji modeli Chaboche'a i Schapery dla tkaniny technicznej Panama.
-
On constitutive modeling for technical woven fabric
PublicationW pracy przestawiono kilka modeli konstytutywnych przyjmowanych do opisu zachowania się tkanin technicznych. Oprócz modeli zaczerpniętych z literatury autorzy prezentują własną koncepcje modelu stanowiąca rozszerzenie modelu sieci gęstej.This paper describes several types of the constitutive models used for the technical woven fabric description. Besides of the literatures examples of the constitutive models, the authors presented...
-
Diagnostics of thermal processes in antenna systems of broadcast stations
PublicationDiagnostics is an important element associated with the operation of a radio antenna systems, allowing earlier detection of potential damage. Thermography is one of the diagnostic tools, which allows for non-invasive assessment of technical condition. It brings together both financial savings associated with the removal of the damage and the potential effects caused by it. The article presents an example of using a thermal imaging...
-
Influence of Property Division on the Technical Condition of a Building
PublicationIn this article, the correlation between a technical condition of a building and property division is analyzed and assessed. In the course of the usage of a building, the process of its degradation and the increase in the demands of property occupants can be observed. There is a direct connection between the difficult technical condition of a building and the fragmentation of the ownership structure. Although not considered in...
-
Dynamic Research of Masonry Vault in a Technical Scale
PublicationThe paper presents preliminary results of dynamic tests of the masonry barrel vault in a technical scale. Experimental studies are intended to identify material properties of homogenized masonry vaults under dynamic loads. The aim of the work is to create numerical models to analyse vault’s dynamic response to dynamic loads in a simplest and accurate way. The process of building the vault in a technical scale is presented in the...
-
Micromouse robot - technical design and construction
PublicationW ostatnich latach obserwuje się intensywny rozwój robotyki. Roboty znajdują zastosowanie w różnych gałęziach przemysłu i życiu codziennym. Ich projektowanie wymaga interdyscyplinarnej wiedzy obejmującej obszary mechaniki, elektroniki, metrologii, automatyki i informatyki. W artykule przedstawiono poszczególne etapy wykonania robota typu Micromouse. Jest to specyficzne urządzenie, którego zadaniem jest zbadanie labiryntu, dotarcie...
-
A concept of the predicting of technical state of devices.
PublicationPrzedstawiono możliwości i ograniczenia dotyczące prognozowaia stanu technicznego urządzeń oraz wykazano potrzebę doskonalenia metod planowania ich obsług profilaktycznych. Wskazano możliwość przekształcenia rozkładów szybkości zużywania urządzeń na rozkłady czasu ich poprawnego działania do osiągnięcia stanu granicznego.
-
Assessment of occupational risk in technical undertakings
PublicationSummary An undertaking - as a new and often single action - in its nature creates problems with predicting the realization of planned aims. Each undertaking bears some risk. Protection of a man who carries out an undertaking is even a more difficult task. The article offers a method of estimating potential risks connected with labour conditions on the basis of risk evaluation at the stage of undertaking planning.Streszczenie Realizacja...
-
PROPRIETARY SOFTWARE IN TECHNICAL HIGHER EDUCATION
PublicationThe authors present a relatively easy way to extend the quality of education in professional studies (engineering) on major “Geodesy and Cartography”. They indicate the possibility to deepen students’ knowledge by using in the educational process proprietary software enriching education. The authors use their own experiences, results of the cooperation with employers, as well as the effects of scientific research to introduce into...
-
PROPRIETARY SOFTWARE IN TECHNICAL HIGHER EDUCATION
PublicationThe authors present a relatively easy way to extend the quality of education in professional studies (engineering) on major “Geodesy and Cartography”. They indicate the possibility to deepen students’ knowledge by using in the educational process proprietary software enriching education. The authors use their own experiences, results of the cooperation with employers, as well as the effects of scientific research to introduce...
-
Technical Engine for Democratization of Modeling, Simulations, and Predictions
PublicationComputational science and engineering play a critical role in advancing both research and daily-life challenges across almost every discipline. As a society, we apply search engines, social media, and se- lected aspects of engineering to improve personal and professional growth. Recently, leveraging such aspects as behavioral model analysis, simulation, big data extraction, and human computation is gain- ing momentum. The nexus...
-
Several notes on technical modernization of a historical building
PublicationThis paper describes methods and means used during the renovation process of several elements of a building – the assembly hall, inner courtyards and attics of the main building at Gdansk University of Technology, both in design and construction domains. A tissue of a historic building required special approach to these tasks, with special emphasis on good recognition of problems, careful planning and consistent implementing of...
-
Modelling of the viscoelastic properties of the technical fabric VALMEX
PublicationThe analysis of the Burgers model used for the constitutive description of the technical fabric VALMEX vis-coelastic behavior is presented. It has revealed that the correctness of the identification depends strongly on the level of the immediate strain taken for calculations. Moreover, it has been proven that the Burgers model can be used for modelling of the viscoelastic properties of the polyester reinforced PVC coated VALMEX...
-
Learning design of a blended course in technical writing
PublicationBlending face-to-face classes with e-learning components can lead to a very successful outcome if the blend of approaches, methods, content, space, time, media and activities is carefully structured and approached from both the student’s and the tutor’s perspective. In order to blend synchronous and asynchronous e-learning activities with traditional ones, educators should make them inter-dependent and develop them according to...
-
Technical diagnostics and monitoring of traction current collectors
PublicationNew evaluation methods of the technical condition of rolling stock current collectors are proposed in this paper. The method of automatic measurement of the pantograph static force characteristic, realized when the vehicle runs through the test section of the track with especially prepared overhead line height distribution, has been practically implemented by the Polish Railways. The method of testing the slipper spring suspension...
-
INNOVATIVE RUN FLAT SYSTEMS
PublicationOne of the most essential threats to the mobility of wheeled vehicles is their relatively high sensitivity to tire damage. Tires can be damaged as a result at vehicle-targeting fire, after running on a mine or an improvised charge. The purpose of the article is to analyze the current technical solutions in wheeled vehicle tires, allowing for the unobstructed use of the vehicle despite the damage of one or several tires (RUN FLAT...
-
Evaluation of technical efficiency of heat and electric power generation
PublicationThis paper presents an evaluation of technical efficiency and time-dependent changes in productivity of Polish professional electric power and heat&electric power stations by using Data Envelopment Analysis non-parametric method. The research covered the enterprises whose total available electric power amounted to about 98% of that of all professional thermal electric power stations in this country. The analysis has concerned...
-
Entrepreneurial competencies and intentions among students of technical universities
PublicationThe study investigates the entrepreneurial competencies and intentions of students. Their formation is a requirement of modern times. The question arises whether students of modern technical universities get entrepreneurial competencies and whether they transform these competencies into their entrepreneurial intentions. More than 3.6 thousand students from six technical universities from Poland, Ukraine, Latvia, Bulgaria, and Lithuania...
-
Tourism in Apuseni Mountains (Romania) – A technical proposal
Publication -
Wireless control process technical exploitation facility
Publication -
Liquid crystals thermography for technical and biomedical application
PublicationW artykule opisano termografię ciekłokrystaliczną jako technikę wykorzystu-jącą termochromatyczne ciekłe kryształy do badań technicznych i biomedycz-nych. W szczególności dotyczy to badań wymiany ciepła i masy, chorób skór-nych i podobnych. Praca zawiera ilustracje z badań przeprowadzonych przezautorów.
-
Investigation on rheological properties of technical fabric "Panama".
PublicationW pracy przestawiono wyniki eksperymentów z tkaniną techniczną "Panama" wykonanych w celu identyfikacji niesprężystych właściwości wątku i osnowy oraz techniki identyfikacji bazujących na metodzie najmniejszych kwadratów. Model sieci gęstej został zaproponowany w celu modelowania zachowania tkaniny technicznej w analizie metodą elementów skończonych. Do opisu lepkoplastycznych właściwości wątku osnowy zastosowano modele Chaboche'a...
-
Dynamic Tests and Technical Monitoring of a Novel Sandwich Footbridge
PublicationA novel sandwich composite footbridge is described in this paper, for the first time after it has been put into operation over the Radunia River in the Pruszcz Gdański municipality. This paper presents results of dynamic tests and describes technical monitoring of the footbridge. The dynamic tests were conducted to estimate pedestrian comfort and were compared with the ones from numerical simulations made in the environment of...
-
Optical low-coherence interferometry for selected technical applications
PublicationW artykule przedstawiono teoretyczne podstawy optycznej interferometrii niskokoherentnej i przedyskutowano jej unikatowe właściwości. Opisano w nim opracowany przez autorów system OCT przeznaczony do badań strukturalnych materiałów technicznych. Badania te obejmują także zmiany stanu polaryzacji promieniowania rozproszonego w badanym obiekcie. W artykule zawarto wyniki badań wybranych materiałów silnie rozpraszających promieniowanie...
-
Identification of Bodner-Partom model parameters for technical fabrics
PublicationThe thorough analysis of modeling technical fabrics behavior with the viscoplastic Bodner-Partom constitutive law is presented. The study has been focused on differences between the warp and weft direction of the material. To obtain the model’s parameters only the uniaxial tensile laboratory tests with three different, but constant strain rates are required. The parameters have been found for polyester fibers PVC coated fabrics:...
-
The use of mathematical models for diagnosis of activated sludge systems in WWTP
PublicationIn this study diagnosis of activated sludge systems in wastewater treatment plant (WWTP) was investigated. Diagnosis of technical objects can be realized in many ways. One of the divisions of the diagnostic methods include modelling with or without a model of the object. The first of these is the analysis of the symptoms for which, based on the parameter values, the abnormality in the diagnosed objects are sought. Another way is...
-
Technical and economical analysis of combined cycles of gas turbine - steam turbine on pipeline compressor stations. Part I - Technical analysis
PublicationW pracy przedstawiono zagadnienie nadbudowy zespołów turbosprężarkowych, znajdujących się na tłoczni gazu ziemnego, odzyskowymi blokami parowymi. W analizie tego przedsięwzięcia wzięto pod uwagę kilka wariantów konfiguracji układu parowego oraz kilka wariantów uwzględniających zmienność obciążenia turbin gazowych napędzających kompresory. Dla układu parowego dobrano wszystkie podstawowe parametry, a następnie wykonano obliczenia...
-
Assessment of Technical Conditions in Adapting a Historic Warehouse's Space Functionality
PublicationThe paper is a case study in the assessment of the technical condition of a building that is an immovable monument located in a former shipyard area. Due to the change in the use of the industrial area and the intention to build a production hall, it was necessary to consider the demolition of the historic building, while preserving as many of its historical aspects as possible. The paper presents a detailed description of the...