Filters
total: 817
Search results for: MARITIME
-
GUIDED WAVES IN SHIP STRUCTURAL HEALTH MONITORING – A FEASIBILITY STUDY
PublicationShips and offshore structures operate in a severe corrosion degradation environment and face difficulty in providing long- lasting corrosion protection. The Classification Societies recommend regular thickness measurements leading to structural component replacements, to ensure structural integrity during service life. The measurements are usually performed using ultrasonic thickness gauges and such an approach requires multiple...
-
DYNAMIC POSITIONING CAPABILITY ASSESSMENT BASED ON OPTIMAL THRUST ALLOCATION
PublicationThe article presents an efficient method of optimal thrust allocation over the actuators in a dynamically positioned ship, according to the DNV-ST-0111 standard, Level 1. The optimisation task is approximated to a convex problem with linear constraints and mathematically formulated as quadratic programming. The case study is being used to illustrate the use of the proposed approach in assessing the DP capability of a rescue ship....
-
Management Strategy for Seaports Aspiring to Green Logistical Goals of IMO: Technology and Policy Solutions
PublicationRecently, because of serious global challenges including the consumption of energy and climate change, there has been an increase in interest in the environmental effect of port operations and expansion. More interestingly, a strategic tendency in seaport advancement has been to manage the seaport system using a model which balances environmental volatility and economic development demands. An energy efficient management system...
-
Toward Safe and Efficient Recovery of Gas Munitions Dumped at Sea
PublicationThe proposal of a system for the safe recovery of unexploded ordnance (UXO), chemical weapons (CW) and chemicalwarfare agents (CWA) dumped at sea mainly after WWI and WWII is described in this work. The proposed solutionaddresses the tasks required to neutralise thousands of tons of dumped material and the currently available solutionsand proposed ideas. Requirements concerning the features of a recovery system are defined and...
-
Diagnostic Analysis of Exhaust Gas with A Quick-Changing Temperature from a Marine Diesel Engine Part II / Two Factor Analysis
PublicationThe article presents a continuation of research carried out to determine the effect of input parameters (changes in engine structure parameters) on selected output parameters (diagnostic measures), based on quickly changing exhaust gas temperature. A method of determining the simultaneous influence of two input factors (the structure parameter and the engine load) on one output factor was presented, as well as an evaluation...
-
ROLE OF GREEN LOGISTICS IN THE CONSTRUCTION OF SUSTAINABLE SUPPLY CHAINS
PublicationThe global supply chain has been growing strongly in recent years. This development brings many benefits to the economy, society, and human resources in each country but also causes a large number of concerns related to the environment since traditional logistics activities in the supply chain have been releasing significant amount of emissions. For that reason, many solutions have been proposed to deal with these environmental...
-
Influence of Material Thickness on the Ductile Fracture of Steel Plates for Shipbuilding
PublicationIn the shipbuilding industry, the risk of brittle fractures is relatively high because some units operate in arctic or subarcticzones and use high thickness (up to 100 mm) steel plates in their structures. This risk is limited by employing certifiedmaterials with a specific impact strength, determined using the Charpy method (for a given design temperature) and byexercising control over the welding processes (technology qualification,...
-
Design of an Autonomous IoT Node Powered by a Perovskite-Based Wave Energy Converter
PublicationThis paper presents the results of experimental research focused on wave energy harvesting and its conversion to power Internet of Things (IoT) devices. The harvesting and conversion process was performed using a wave energy converter (WEC) consisting of a lead zirconate titanate piezoelectric ceramic perovskite material and a prototype power electronic circuit. The designed WEC was considered as a power supply for an end node...
-
Analysis of the Environmental Impact of the Hull Construction of a Small Vessel Based on LCA
PublicationIn recent years, issues related to the impact of human activity on the natural environment have become pressing, and the challenge of global warming necessitates immediate action. To support environmental protection efforts, it has become imperative to adopt a broader perspective when evaluating various products and systems. A valuable tool for such assessments is a life cycle assessment (LCA), which enables a comprehensive analysis...
-
Quantumness in Diagnostics of Marine Internal Combustion Engines and Other Ship Power Plant Machines
PublicationThe article provides proof that the diagnostics of marine internal combustion engines and other ship power plant machines should take into account the randomness and unpredictability of certain events, such as wear, damage, the variations of mechanical and thermal loads, etc., which take place during machine operation. In the article, the energy E, like the other forms (methods) that it can be converted into (heat and work), is...
-
Human Resource Management Digitalisation in Multidisciplinary Ship Design Companies
PublicationThe digitalisation in the ship design sector is currently applied to the design process itself and is well defined, partially standardised and practically implemented by both independent design companies and the design departments of shipyards. The situation is similar in other sectors of engineering. However, the requirements for the digitalisation of other processes in design and engineering companies have not previously been...
-
Telemedicine - education and practice
PublicationArtykuł przedstawia wybrane elementy telemedycyny w zastosowaniu edukacyjnym oraz w praktyce lekarza. Przedstawiono zrealizowane projekty w ramach współpracy Katedry Inżynierii Biomedycznej Politechniki Gdańskiej i Akademiii Medycznej w Gdańsku.
-
On possible lowering fuel oil consumption by differentiating loads on ship diesel engines running in parrallel.
PublicationPodano możliwości zmniejszenia zużycia paliwa przez silniki okrętowe pracujące równolegle dzieki różnicowaniu ich obciążeń eksploatacyjnych. Zaprezentowano podstawy teoretyczne oraz sposób postępowania przy pomiarach zużycia paliwa w czasie rzeczywistym.
-
Influence of adjustment of gas turbine controller on ship propulsion system behaviour in rough sea conditions. Part 1. The dynamic model of propulsion system.
PublicationPrzedstawiono model dynamiki układu napędowego okrętowego, wykorzystując metodę elementów skończonych. Układ napędowy składa się z dwóch turbin gazowych napędzających poprzez przekładnię mechaniczną zębatą pędnik o nastawnym skoku. W symulacji układu napędowego można zadawać wymuszenia wartością zadaną nastaw prędkości na regulatorze, wymuszenia od falowania morza w zależności od stanu morza, jak również zmianą ustawienia skoku...
-
Use of the AHP Method for Preference Determination in Yacht Design
PublicationA sailing yacht is a human-centred product, the design of which revolves primarily around the wants and desires of the future owner. In most cases, these preferences are not measurable, such as a personal aesthetic feeling, or a need for comfort, speed, safety etc. The aims of this paper are to demonstrate that these preferences can be classified and represented numerically, and to show that they are correlated with the type of...
-
COMMENTS ON EXISTING ANALYTICAL SOLUTIONS TO THE WAVE-INDUCED CYCLIC RESPONSE OF A POROUS SEABED OF INFINITE THICKNESS
PublicationThis paper deals with the wave-induced cyclic response of a porous seabed (by means of oscillating parameters: pore-fluid pressure, soil displacement components, effective normal stress and shear stress components) due to a surface sinusoidal water-wave propagating over a seabed of infinite thickness. The main existing analytical solutions to the governing problem are critically discussed, pointing out their meaningful errors and...
-
A Generative Approach to Hull Design for a Small Watercraft
PublicationIn the field of ocean engineering, the task of spatial hull modelling is one of the most complicated problems in ship design. This study presents a procedure applied as a generative approach to the design problems for the hull geometry of small vessels using elements of concurrent design with multi-criteria optimisation processes. Based upon widely available commercial software, an algorithm for the mathematical formulation of...
-
An innovative method of measuring the extension of the piston rod in hydraulic cylinders, especially large ones used in the shipbuilding and offshore industry
PublicationThe article presents the results of selected works related to the wider subject of research conducted at the Faculty of Mechanical Engineering and Shipbuilding at the Gdańsk University of Technology, regarding designing various on board devices with hydraulic drive for ships and other offshore facilities. One of the commonly used these mechanisms are hydraulic actuators with the measurement of the piston rod extension. The issue...
-
HEALTH MONITORING OF A COMPRESSION IGNITION ENGINE FED WITH DIFFERENT LOW-SULPHUR MARINE FUELS BY ENDOSCOPIC IMAGE PROCESSING AND ANALYSIS
PublicationThis article characterises the methodology for the endoscopic testing of a laboratory diesel engine used for testing marine fuels. The ‘Shadow’ measurement method used in the XLG3 type EVEREST digital endoscope, for quantitative and qualitative identification of detected surface defects, was approximated. Representative endoscopic images of the elements limiting the working space of the research engine are demonstrated, having...
-
Accuracy Of The GPS Positioning System In The Context Of Increasing The Number Of Satellites In The Constellation
Publication -
Position accuracy evaluation of the modernized Polish DGPS
Publication -
Application of an Autonomous/Unmanned Survey Vessel (ASV/USV) in Bathymetric Measurements
Publication -
Polish DGPS System: 1995–2017 – Study of Positioning Accuracy
Publication -
A Method for The Assessing of Reliability Characteristics Relevant to an Assumed Position-Fixing Accuracy in Navigational Positioning Systems
PublicationThis paper presents a method which makes it possible to determine reliability characteristics of navigational positioning systems, relevant to an assumed value of permissible error in position fixing. The method allows to calculate: availability , reliability as well as operation continuity of position fixing system for an assumed, determined on the basis of formal requirements - both worldwide and national, position-fixing accuracy....
-
Modeling the risk of ship grounding—a literature review from a risk management perspective
Publication -
Evaluation Methodology for Ship’s Planned Maintenance System Database
Publication -
Shipowner’s Impact on Planned Maintenance System Database Quality Grades Resemblance Equalization
Publication -
EDD – Economic Benefit Analysis of Extending Dry Docking Interval
Publication -
Cruise Vessels Air Pollution Inventory for the Port of Kotor
Publication -
K-means clustering for SAT-AIS data analysis
Publication -
Simplified Method of Modelling Behaviour of Ship in Waves with Partially Flooded Compartments
PublicationThis paper contains a description of a numerical model for calculating behaviour of ships in waves. There are many models available, but the one described here can be characterised with a set of parameters that have a decisive impact on the final values of roll motion amplitude and frequency. In this paper, it is shown how a fitting of a standard-shape hull characterised by certain readily available parameters affects...
-
The selected hydrotechnical conditions of the Dnieper – Bug Channel and the Pripyat River in the development of the International Waterway E40
PublicationInternational waterway E40 (MDW E40) is included in the network of inland waterways of transnational importance. It is a link between two areas: the Baltic Sea and the Black Sea. E40 route runs through three countries: Poland, Belarus and Ukraine. The article presents the results of the study on the analysis of two very important sections of the MDW E40 on the Belarusian section, it is:. the Dnieper – Bug Channel and the Pripy...
-
Reliability of Corroded Stiffened Plate Subjected to Uniaxial Compressive Loading
PublicationThe work is focused on the reliability of corroded stiffened plates subjected to compressive uniaxial load based on the progressive collapse approach as stipulated by the Common Structural Rules for Bulk Carriers and Oil Tankers, employing the limit state design. Two different cases have been investigated. In the first model, the corrosion degradation led to uniform thickness loss, whereas the mechanical properties were unchanged,...
-
Oil spill response planning tool for estimating the recovery capability of mechanical skimming systems potential
Publication -
Cooperative response to marine hazardous and noxious substances and oil spill incidents in the ASEAN region
Publication -
Assessment of potentially cutting GHG emissions from shipping in relation to energy consumption trends using Fuzzy Analytic Hierarchy Process
Publication -
The Port of Split international marine traffic emissions inventory
Publication -
Rozkład naprężeń mechanicznych w łyżce o szerokości 500 mm, przeznaczonej do koparki podsiębiernej
PublicationW artykule zaprezentowano optymalizację kształtu łyżki koparki przedsiębiernej z wykorzystaniem analizy wytrzymałościowej. Analizę oparto na trójwymiarowym modelu konstrukcji łyżki z zastosowaniem metody elementów skończonych (MES). Opracowanie wspomnianej metody pozwoliło na modyfikację konstrukcji łyżki, która dała w efekcie obniżenie naprężeń złożonych w newralgicznych obszarach konstrukcji łyżki. Przedstawiona analiza okazała...
-
Analiza i ocena poprawności działania węzła tarcia w aspekcie II zasady termodynamiki
PublicationW artykule przedstawiono autorską metodę sprawdzania poprawności działania węzła tarcia traktowanego jako układ tribologiczny w aspekcie II zasady termo-dynamiki na podstawie analizy i oceny wyników badań laboratoryjnych wykonanych na stanowisku badawczym. Jako stanowisko wykorzystany został zmodyfikowany węzeł tarcia aparatu czterokulowego T-02. Zaprezentowano algorytm, według którego zostały wykonane badania empiryczne. Wykazano,...
-
Metoda wyznaczania stałej czasowej termopary na podstawie pomiaru szybkozmiennej temperatury spalin wylotowych silnika o ZS
PublicationW niniejszym artykule przedstawiono problematykę wyznaczania stałej czasowej termopary. Wskazano na wagę właściwości dynamicznych termopar podczas eksperymentów. Przedstawiono stanowisko laboratoryjne, na którym przeprowadzono badania, mające na celu wyznaczenie stałych czasowych dwóch rodzajów termopar. Zaprezentowano trzy metody obliczania tego parametru. Określono wartość stałej czasowej, wyznaczonej metodą symulacji numerycznej...
-
Wykorzystanie obszarów morskich pod zabudowę o przeznaczeniu wielofunkcyjnym
PublicationW artykule opisano możliwości zagospodarowania obszarów wodnych na potrzeby rozwoju obszarów miejskich. W kontekście obecnych uwarunkowań ekologicznych oraz bogactwa zasobów obszarów wodnych budownictwo wielofunkcyjne na wodzie ma duże szanse na rozwiązanie problemów dotyczących braku przestrzeni na lądzie. Wiąże się to z rozszerzeniem tradycyjnego podejścia stosowanego przy projektowaniu o elementy związane ze specyfiką konstrukcji...
-
The properties of polyurethanes based on synthetic polyhydroxybutyrate for medical application
Publication.
-
Wyładowanie mikrofalowe (915 MHz) dużej mocy w argonie pod ciśnieniem atmosferycznym
PublicationW niniejszym artykule przedstawiono wyniki pomiarów spektroskopowych wyładowania mikrofalowego w argonie pod ciśnieniem atmosferycznym. Badania przeprowadzono dla wyładowania mikrofalowego podtrzymywanego mikrofalami o częstotliwości 915 MHz w mikrofalowym aplikatorze plazmy typu rezonator wnękowy. Na podstawie uzyskanych wyników określono temperaturę wzbudzenia elektronowego, temperaturę cząstek ciężkich plazmy oraz koncentracje...
-
Prototypowe urządzenie laserowe do femtosekundowej mikroobróbki materiałów
PublicationW artykule przedstawiono prototypowe urządzenie do laserowej mikroobróbki materiałów. Urządzenie to wykorzystuje femtosekundowy laser światłowodowy oparty na krysztale Yb:KYW. Wykorzystanie ultrakrótkich impulsów laserowych w mikroobróbce materiałów oferuje dużą przewagę nad mikroobróbką długoimpulsową ze względu na zminimalizowanie szkodliwego wpływu oddziaływań cieplnych. Pozwala to na bardzo precyzyjne i czyste cięcia oraz wysoki...
-
Układ zastępczy i charakterystyki elektrodynamiczne mikrofalowego aplikatora plazmowego typu rezonator wnękowy (915 MHz)
PublicationMikrofalowe aplikatory plazmowe wykorzystuje się m.in. do obróbki gazów, w tym do produkcji wodoru poprzez reforming węglowodorów. W pracy przedstawiono elektryczny schemat zastępczy o stałych skupionych mikrofalowego aplikatora typu rezonator wnękowy, wykonanego z odcinka falowodu prostokątnego WR 975. Omówiony aplikator plazmowy pracuje przy częstotliwości 915 MHz. Wyładowanie mikrofalowe powstaje w tym aplikatorze pod ciśnieniem...
-
SPEKTROSKOPOWE BADANIA WYŁADOWANIA MIKROFALOWEGO W ŹRÓDLE PLAZMY TYPU KOMORA REZONANSOWA ZASILANA FALOWODOWO
PublicationW pracy przedstawiono wyniki spektroskopowych badań wyładowania mikrofalowego (2,45 GHz) pod ciśnieniem atmosferycznym, generowanego w źródle plazmy typu komora rezonansowa. Gazami roboczymi były: argon, azot oraz metan, a także mieszaniny argon/metan oraz azot/metan. Natężenie przepływu gazu roboczego zmieniano w zakresie od 50 do 100 l/min, natomiast moc mikrofal absorbowanych przez wyładowanie wynosiła od 300 do 4000 W. Zmierzone...
-
ZARZĄDZANIE PROCESAMI LOGISTYKI MAGAZYNOWEJ W PRZEDSIĘBIORSTWIE
PublicationArtykuł dotyczy problemów zarządzania procesami logistycznymi i ich przebiegów w sferze logistyki magazynowej. Opisano przykładowe rozplanowanie procesów logistyki magazynowej w dwóch przedsiębiorstwach, a następnie porównano przytoczone przebiegi z procesami magazynowymi badanej firmy. W celu optymalizacji zarządzania procesami logistyki magazynowej w opisywanym przedsiębiorstwie zaproponowano trzy warianty poprawy działań logistycznych....
-
KONCEPCJA SYSTEMU WSPOMAGAJĄCEGO ŻEGLUGĘ ŚRÓDLĄDOWĄ – STUDIUM PRZYPADKU DLA DOLNEGO ODCINKA WISŁY
PublicationArtykuł przedstawia wyniki prowadzonych badań, dotyczących aktualnych warunków żeglugowo-nawigacyjnych, intensywności ruchu statków, wypadków i incydentów dla dolnego odcinka Wisły jako uzasadnienie do wprowadzenia systemu wspomagającego żeglugę śródlądową na Dolnej Wiśle. Przedstawiono i scharakteryzowano dwa warianty wdrożenia systemu informacji rzecznej
-
Analiza spostrzeżeń podczas audytów w przedsiębiorstwach z branży spożywczej
PublicationAnalizowano dane z 54 przedsiębiorstw potwierdzających zgodność z wdrożonym systemem ISO 22000 w latach 2005–2013 przez jednostkę certyfikującą DNV GL–BA. Przedstawiono najczęściej spotykane kategorie niezgodności stwierdzane podczas audytów certyfikujących w przedsiębiorstwach należących do łańcucha żywnościowego. Przeanalizowano występujące problemy wpływające na bezpieczeństwo żywności podczas procesu produkcyjnego. Obliczono...
-
Wykorzystanie miejskich obszarów nadbrzeżnych pod zabudowę o przeznaczeniu wielofunkcyjnym
PublicationW artykule przedstawiono analizę wykorzystania terenów aglomeracji miejskich położonych na styku lądu z wodą pod zabudowę o charakterze wielofunkcyjnym. Zaprezentowano aktualne podejście w projektowaniu przedmiotowych terenów oraz możliwości związane z rozwojem aglomeracji miejskich zlokalizowanych przy nabrzeżach akwenów. Zrównoważony rozwój gospodarczy tych terenów ściśle jest uzależniony od sposobu zagospodarowania przestrzeni....