Search results for: GAS TEMPERATURE MEASUREMENT

• Szybkie uziemniki do ograniczania skutków zwarć łukowych w okrętowych rozdzielnicach SN

  Publication

  • R. Partyka
  • D. Kowalak

  - Year 2014

  W artykule scharakteryzowano moc i napięcie łuku, jak również przedstawiono model termodynamiczny służący do obliczania ciśnienia i temperatury gazów w otoczeniu łuku zwarciowego. Przedstawiono przykładowy układ elektrowni okrętowej i zasilania najważniejszych odbiorników na statku do przewozu gazu ziemnego w stanie ciekłym. Na podstawie parametrów prądnic i silników odbiorników zasilanych z rozdzielnicy głównej obliczono prądy...

• The electrical properties mesurements of DIR-SOFC with CeO2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with CeO2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of DIR-SOFC with Ce0.8Fe0.2O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Fe0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of DIR-SOFC with Ce0.8Mn0.2O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Mn0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of DIR-SOFC with Ce0.8Co0.2O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Co0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of DIR-SOFC with Ce0.8Cu0.2O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Cu0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of DIR-SOFC with Ce0.8Ni0.2O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  - series: DIR-SOFC

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Ni0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• Szacowanie estymaty menzurandu temperatury skóry człowieka podczas próby wysiłkowej

  Publication

  • A. Golijanek-Jędrzejczyk
  • A. Dzwonkowski
  • D. Świsulski

  - Przegląd Elektrotechniczny - Year 2019

  W artykule zaprezentowano wyniki pomiarów temperatury skóry człowieka podczas próby wysiłkowej. Ponieważ uzyskane wyniki nie podlegają rozkładowi normalnemu, wyznaczono wartości pięciu różnych estymatorów menzurandu. Otrzymane rezultaty wykazały, że w rozważanym przypadku najlepszy estymator menzurandu otrzymujemy z metody bootstrap, ponieważ charakteryzuje się on najmniejszym odchyleniem standardowym.

  Full text available to download

• Skutki zwarć łukowych w średnionapięciowych rozdzielnicach okrętowych z izolacją powietrzną

  Publication

  • R. Partyka
  • D. Kowalak

  - Przegląd Elektrotechniczny - Year 2013

  W artykule scharakteryzowano moc i napięcie łuku, jak również przedstawiono model termodynamiczny służący do obliczania ciśnienia i temperatury gazów w otoczeniu łuku zwarciowego. Przedstawiono przykładowy układ elektrowni okrętowej i zasilania najważniejszych odbiorników na statku do przewozu kontenerów, w tym 600 kontenerów chłodzonych. Na podstawie parametrów prądnic i silników, odbiorników zasilanych z rozdzielnicy głównej...

  Full text to download in external service

• Tensile test of 1.4541 / X6CrNi18-10 / AISI 321 grade austenitic steel

  Open Research Data

  open access

  • J. Kowalski

  Ship structures and their components are build mainly of steel. Hull steel is used to build the hull structure. Some structural elements, such as RSW (Refrigerated See Water) tanks, or LNG (Liquid Natural Gas) tanks - gas transported at temperatures below -162° C, are build from austenitic steels. Austenitic steels have a different microstructure and...

• Tensile test of 1.4307 / X2CrNi18-9 / AISI 304L grade austenitic steel

  Open Research Data

  open access

  • J. Kowalski

  Ship structures and their components are build mainly of steel. Hull steel is used to build the hull structure. Some structural elements, such as RSW (Refrigerated See Water) tanks, or LNG (Liquid Natural Gas) tanks - gas transported at temperatures below -162° C, are build from austenitic steels. Austenitic steels have a different microstructure and...

• Electrical responses of nanoporous NiO films for light-activated nitrogen dioxide and acetone gas sensing

  Open Research Data

  open access

  • K. Drozdowska
  • J. Smulko

  The chemoresistive sensor response of nanoporous NiO films prepared by advanced gas deposition was investigated with and without simultaneous light irradiation, to detect nitrogen dioxide and acetone gases. The presented data show electrical responses presented as sensor resistance or relative changes in sensor resistance under selected environment...

• API 5L X65 steel - CMOD-force record in -10°C, along rolling direction

  Open Research Data

  open access

  • J. Kowalski

  - series: API 5L X65 steel

  Steel designated as API 5L X65 is often used for oil and gas transportation pipelines. It is caused due to its high ductility, weldability and good corrosion resistance. API 5L X65 is a low alloy steel with carbon content less than 0.3% (depends on delivery condition). Once installed, a pipeline remains in place for many years. Throughout its life,...

• API 5L X65 steel - CMOD-force record in -10°C, across rolling direction

  Open Research Data

  open access

  • J. Kowalski

  - series: API 5L X65 steel

  Steel designated as API 5L X65 is often used for oil and gas transportation pipelines. It is caused due to its high ductility, weldability and good corrosion resistance. API 5L X65 is a low alloy steel with carbon content less than 0.3% (depends on delivery condition). Once installed, a pipeline remains in place for many years. Throughout its life,...

• API 5L X65 steel - fracture documentation of CMOD-force test in -10°C, along rolling direction

  Open Research Data

  open access

  • J. Kowalski

  - series: API 5L X65 steel

  Steel designated as API 5L X65 is often used for oil and gas transportation pipelines. It is caused due to its high ductility, weldability and good corrosion resistance. API 5L X65 is a low alloy steel with carbon content less than 0.3% (depends on delivery condition). Once installed, a pipeline remains in place for many years. Throughout its life,...

• API 5L X65 steel - fracture documentation of CMOD-force test in -10°C, across rolling direction

  Open Research Data

  open access

  • J. Kowalski

  - series: API 5L X65 steel

  Steel designated as API 5L X65 is often used for oil and gas transportation pipelines. It is caused due to its high ductility, weldability and good corrosion resistance. API 5L X65 is a low alloy steel with carbon content less than 0.3% (depends on delivery condition). Once installed, a pipeline remains in place for many years. Throughout its life,...

• Tensile test of 1.4571 / X6CrNiMoTi17-12-2 / AISI 316Ti grade austenitic steel

  Open Research Data

  open access

  • J. Kowalski

  Ship structures and their components are build mainly of steel. Hull steel is used to build the hull structure. Some structural elements, such as RSW (Refrigerated See Water) tanks, or LNG (Liquid Natural Gas) tanks - gas transported at temperatures below -162° C, are build from austenitic steels. Austenitic steels have a different microstructure and...

• Marek Pszczoła dr hab. inż.

  People

  Department of Transportation Engineering

  I am a Faculty member (Department of Highway and Transportation Engineering) at the Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Poland). My main research interests include: low-temperature properties of asphalt mixtures, low temperature cracking assessment of pavement structures, road materials properties, thermal stress analysis, design of pavement structures, airfield design and analysis....

• Simulation of signal acquisition from a rotary flowmeter

  Open Research Data

  open access

  • D. Świsulski

  The dataset contains results of simulation measuring the flow of homogeneous substances by rotational flow meter: a moment of impulse at the output of flow meter, time between successive pulses, number of pulses counted from standard generator and relative error of measurement.

• Kinetics of hexane and cyclohexane biodegradation using Candida subhashii in mineral salt medium in the presence of DES solution

  Open Research Data

  open access

  • P. Rybarczyk

  Dataset presents results of investigations on kinetics of biodegradation of hexane and cyclohexane in Candida subhashii.

• Two-phase water-air flow measurement using gamma-ray absorption technique – plug flow

  Open Research Data

  open access

  • M. Zych
  • R. Hanus
  • D. Świsulski

  The attached datasets contains the measurement results of the air-water flow in a horizontal pipeline. Flow type: plug flow. The data shows the pulse counts of the two radiometric sets. Each of these kits consisted of a QSA Global Am-241 gamma ray source and a Tesla SKG-1 type NaI(Tl) scintillation probe. The pulses were recorded using a dedicated EC...

• Two-phase water-air flow measurement using gamma-ray absorption technique – slug flow

  Open Research Data

  open access

  • M. Zych
  • R. Hanus
  • D. Świsulski

  The attached datasets contains the measurement results of the air-water flow in a horizontal pipeline. Flow type: slug flow. The data shows the pulse counts of the two radiometric sets. Each of these kits consisted of a QSA Global Am-241 gamma ray source and a Tesla SKG-1 type NaI(Tl) scintillation probe. The pulses were recorded using a dedicated EC...

• Two-phase water-air flow measurement using gamma-ray absorption technique –bubble flow

  Open Research Data

  open access

  • M. Zych
  • R. Hanus
  • D. Świsulski

  The attached datasets contains the measurement results of the air-water flow in a horizontal pipeline. Flow type: bubble flow. The data shows the pulse counts of the two radiometric sets. Each of these kits consisted of a QSA Global Am-241 gamma ray source and a Tesla SKG-1 type NaI(Tl) scintillation probe. The pulses were recorded using a dedicated...

• FTIR spectra and IGC chromatograms for chemically reduced graphene oxide aerogels (rGOA)

  Open Research Data

  open access

  • G. Boczkaj
  • R. Castro Munoz
  • M. Plata-Gryl

  The effect of selected synthesis parameters on reduced graphene oxide aerogels properties was investigated using Fourier-transform infrared spectroscopy and dynamic adsorption method (Inverse Gas Chromatography, IGC). Samples were synthesized by sol-gel method by reduction induced self-assembly of graphene oxide. As a reductant l-ascorbic acid was used....

• Two-phase water-air flow measurement using gamma-ray absorption technique – transitional plug – bubble flow

  Open Research Data

  open access

  • M. Zych
  • R. Hanus
  • D. Świsulski

  The attached datasets contains the measurement results of the air-water flow in a horizontal pipeline. Flow type: transitional plug – bubble flow. The data shows the pulse counts of the two radiometric sets. Each of these kits consisted of a QSA Global Am-241 gamma ray source and a Tesla SKG-1 type NaI(Tl) scintillation probe. The pulses were recorded...

• Chemorezystancyjny czujnik gazu na bazie polimeru przewodzącego PEDOT

  Publication

  • K. Dunst
  • P. Jasiński

  - Year 2013

  Polimery przewodzące, takie jak Poli(3,4-etylenodioksytiofen) (PEDOT) są atrakcyjnymi materiałami elektrodowymi, które posiadają takie zalety, jak biokompatybilność, duża przewodność i elastyczność. Elektroprzewodzące polimery można otrzymać w wyniku chemicznej polimeryzacji lub elektropolimeryzacji. W niniejszej pracy przedstawiono zostanie koncepcja czujnika gazów składająca się z elektrody grzebieniowej oraz polimeru przewodzącego...

• Wpływ azotowania jarzeniowego i laserowego nadtapiania na odporność kawitacyjną stali X5CrNi18-10

  Publication

  • A. Sitko

  - Year 2013

  Nierdzewne stale austenityczne charakteryzują się doskonałą odpornością korozyjną, aczkolwiek niskimi właściwościami mechanicznymi. W wielu przypadkach ogranicza to ich eksploatację w warunkach przemysłowych. Ponadto, nierdzewne stale austenityczne są wrażliwe na korozję lokalną w obecności jonów halogenkowych. Technologie materiałowe, które dają potencjalne możliwości otrzymywania korzystnego wpływu na właściwości mechaniczne...

• The electrical properties mesurements of SOFC with Ce0.8Co0.15Cu0.05O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Co0.15Cu0.05O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of SOFC with Ce0.9Co0.1O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  The dataset includes the electrical properties mesurements of SOFC with Ce0.9Co0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of SOFC with Ce0.8Co0.1Cu0.1O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  The dataset includes the electrical properties mesurements of SOFC with Ce0.8Co0.1Cu0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• The electrical properties mesurements of SOFC with Ce0.9Cu0.1O2-s functional layer

  Open Research Data

  open access

  • B. Bochentyn
  • P. Błaszczak

  The dataset includes the electrical properties mesurements of SOFC with Ce0.9Cu0.1O2-s layer. Samples were produced using aqueous soft chemistry methods (microemulsion method) and applied in form of a layer onto the anode of the commercial SOFC. The SOFC was working under biogas feeding at 750oC. The layers were sintered at 1100oC. 

• Electrical responses of Graphene-Silicon Schottky diodes toward nitrogen dioxide and tetrahydrofuran under irradiation

  Open Research Data

  open access

  • K. Drozdowska
  • J. Smulko

  Graphene-Silicon Schottky junctions were utilized as gas sensors toward inorganic (nitrogen dioxide) and organic (tetrahydrofuran) gas qualitative and quantitative detection. The electrical responses of the sensors were collected in the form of current-voltage characteristics and measurements of current in time domain for a selected voltage bias. The...

• Steam and Gas Turbines lato 24_5

  e-Learning Courses

  • J. Głuch

  Steam and Gas Turbines, Studium Stacjonarne, wykład i seminarium, środa 9.00-11.00

• Purchasing power - purchases of coal and fuels in Poland in 2004 - 2021 for the average salary

  Open Research Data

  open access

  • P. Kasprzak

  The dataset contains information on the number of tons of coal and the number of liters of PB95 gasoline,diesel oil and LPG gas in Poland for the average monthly salary. The dataset covers the years 2004 - 2021 of each year. The values ​​included in the list have been averaged.

• ETS prices 2008-2024

  Open Research Data

  open access

  • P. Kasprzak

  The European Union Emissions Trading System (EU ETS) is a carbon emission trading scheme (or cap and trade scheme) which began in 2005 and is intended to lower greenhouse gas emissions by the European Union countries. The "ETS prices 2008-2024" dataset contains a summary of ETS prices in 2008-2024.

• Fundamentals of Steam and Gas Turbines OASIV

  e-Learning Courses

  • J. Głuch

  Application of turbines in industry and sea power plants. Basic thermodynamics and fluid flow mechanics in turbomachinery. Steam turbine power cycle and plants. Gas turbine power cycle and plants. Turbine blading systems operation.

• Temperature

  Journals

  ISSN: 2332-8940 , eISSN: 2332-8959

• Electrical conductivity of the Sr0.86Ti0.65Fe0.35O3-d pellet at different oxygen partial pressures

  Open Research Data

  open access

  • A. Mroziński

  - series: Electrochemical properties of porous Sr0.86Ti0.65Fe0.35O3 oxygen electrodes

  This dataset contains results electrical conductivity measurements of dense  Sr0.86Ti0.65Fe0.35O3-d (STF35) pellet. DC electrical conductivity measurements of STF35 were performed by the Van der Pauw method. Studies were performed at different oxygen partial pressures (20%, 1% and 0.1%) under humidified (~4 vol%) gas flow rate of 50 ml min -1.

• MEASUREMENT SCIENCE & TECHNOLOGY

  Journals

  ISSN: 0957-0233 , eISSN: 1361-6501

• Measurements and Measurement Systems [2021/22]

  e-Learning Courses

  • A. Golijanek-Jędrzejczyk
  • A. Dzwonkowski
  • M. Śliwiński
  • M. Wołoszyn

  The aim of the course is to introduce theoretical and practical students with basic and advanced methods of measurement of various measured quantity and the design and function of the measurement systems.

• Electrical conductivity of the SrTi1-xFexO3-d pellets at 20% pO2

  Open Research Data

  open access

  • A. Mroziński

  - series: Effect of sintering temperature on electrochemical performance of porous SrTi1-xFexO3-δ oxygen electrodes

  This dataset contains results electrical conductivity measurements of dense  SrTi1-xFexO3-d (x=0.35, 0.50, 0.70) pellets. DC electrical conductivity measurements were performed by the Van der Pauw method between 900 °C and 200 °C. Studies were performed at  20% of oxygen partial pressure under humidified (~4 vol%) gas flow rate of 50 ml min -1.

• Scanning electron microscopy (SEM) images of the boron-doped carbon nanowalls surfaces

  Open Research Data

  open access

  • M. Ficek
  • R. Bogdanowicz
  • J. Ryl

  The dataset contains the scanning electron micrographs (SEM), revealing the surface morphology of boron-doped carbon nanowalls electrodes on silicon substrates. The surface is characterized by nano-walled structures. The obtained electrodes were doped with boron at the level of [B]/[C] = 2000ppm  in the gas atmosphere during the synthesis.

• Scanning electron microscopy (SEM) images of the boron-doped carbon nanowalls surfaces

  Open Research Data

  open access

  • M. Ficek
  • R. Bogdanowicz
  • J. Ryl

  The dataset contains the scanning electron micrographs (SEM), revealing the surface morphology of boron-doped carbon nanowalls electrodes on silicon substrates. The surface is characterized by nano-walled structures. The obtained electrodes were doped with boron at the level of [B]/[C] = 5000ppm  in the gas atmosphere during the synthesis.

• Scanning electron microscopy (SEM) images of the boron-dopied carbon nanowalls surfaces

  Open Research Data

  open access

  • M. Ficek
  • R. Bogdanowicz
  • J. Ryl

  The dataset contains the scanning electron micrographs (SEM), revealing the surface morphology of boron-doped carbon nanowalls electrodes on silicon substrates. The surface is characterized by nano-walled structures. The obtained electrodes were doped with boron at the level of [B]/[C] = 1200ppm  in the gas atmosphere during the synthesis.

• Complete input data to CFD 3D model of combustion in the large marine 4-stroke engine

  Open Research Data

  open access

  • J. Kowalski

  Input data to CFD and 3D model of combustion process for large marine 4-stroke diesel engine.

• Electrical conductivity of the (Ce0.80Gd0.20)O1.90 pellet at different oxygen partial pressures

  Open Research Data

  open access

  • A. Mroziński

  - series: Effect of sintering temperature on electrochemical performance of porous SrTi1-xFexO3-δ oxygen electrodes

  This dataset contains results electrical conductivity measurements of dense  (Ce0.80Gd0.20)O1.90 (CGO-20) pellet. DC electrical conductivity measurements of CGO-20 were performed by the Van der Pauw method between 900 °C and 450  °C with 50 °C step. Studies were performed at different oxygen partial pressures (100%, 20% and 1%) under humidified (~4...

• Wpływ wybranych parametrów środowiska na przebieg degradacji rur okładzinowych ze stali P110

  Publication

  • M. Kmieć

  - Year 2023

  Materiały używane na orurowanie odwiertów w poszukiwaniu i wydobyciu ropy i gazu poddawane są niekorzystnym warunkom eksploatacji takich jak: podwyższona temperatura, wysokie ciśnienie, turbulentny przepływ korozyjnych cieczy z zawieszonymi cząstkami stałymi. Jednym z gatunków stali używanych do produkcji rur okładzinowych jest stal P110 (za normą API 5CT) będąca stalą średnio-węglową, niskostopową o wysokiej wytrzymałości. Celem...

  Full text available to download

• IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

  Journals

  ISSN: 0018-9456 , eISSN: 1557-9662

• Electrical responses of nanostructured ZrS3 as field-effect transistor for nitrogen dioxide, ethanol, and acetone detection enhanced by visible light

  Open Research Data

  open access

  • K. Drozdowska
  • J. Smulko

  Small-area layers of nanostructured ZrS3 were fabricated and measured in the field-effect transistor configuration. Irradiation with visible light enabled generating photocurrent and increasing the sensitivity to selected ambient gases: nitrogen dioxide, ethanol, and acetone. The data set consists of electrical responses (current vs. voltage characteristics...

• Influence of vision measurement system spatial configuration on measurement uncertainty, based on the example of electric traction application

  Publication

  • J. Skibicki
  • S. Judek

  - MEASUREMENT - Year 2018

  Technical diagnostics plays a significant role in ensuring operational reliability of electrified rail transport. The most critical point in the transmission of electric energy to vehicles is the sliding contact of the current collector with the traction network. For this reason, work is currently being carried on new measuring methods, whose appliance allows for more complete diagnostics of the contact line and current collectors,...

  Full text available to download