Filters
total: 105
filtered: 85
Search results for: planetary gearbox
-
Grinding of cemented carbides with planetary kinematics
PublicationW pracy przeprowadzono wyniki badań szlifowania z wykorzystaniem nowoczesnej szlifierki planetarnej DLM 505 HS. Zastosowano jednolite narzędzie wykonane z ziarna diamentowego D107. W artykule wyprowadzono podstawowe równania ruchu w układzie planetarnym. Przedstawiono również wartości parametrów chropowatości, ubytku materiałowego i płasko-równoległości po szlifowaniu przedmiotów wykonanych z węglików spiekanych - HF10, D10x8 mm.
-
Methodology of experimental research on efficiency of hydro-mechanical automatic gearbox
PublicationThe article shortly describes the design and principle of operation of the hydromechanical gearbox and presents the methodology and design of test stands used for testing hydromechanical proto-type gearbox developed at Technical University of Gdansk. The article presents an approach according to which, in order to obtain reliable measurement data, it is necessary to separate the tests of the hydraulic and mechanical parts of the...
-
Application of decision–making parametric structures in the analysis of a compound planetary gear
Publication -
Condition monitoring of wind turbines based on cointegration analysis of gearbox and generator temperature data
Publication -
The use of plate springs for preloading of a system of tapered roller bearings of a wind turbine gearbox
PublicationThe use of preloaded tapered roller bearings in wind turbine drive systems allows a transfer of load in the case of high variations of axial forces. The examined bearing system, a modification of a current design, consists of a pair of different sized bearings. Previous study showed the high sensitivity of tapered roller bearings on the existing radial interference. Dimensional tolerances used in the original design do not allow...
-
From the Spherical Earth Model to the Globe: The Effectiveness of a Planetary Model-Building Intervention
Publication -
The (Un)Real City by Magdalena Abakanowicz: Guidelines for Cities in Times of Planetary Crisis
PublicationThree decades have passed since Magdalena Abakanowicz presented her concept of Bois de Nanterre — Arboreal Architecture, in response to a call for a broader reflection on approaches to urban landscaping and a reinterpretation of the meaning and evolution of the Grand Axis in Paris. This paper analyses the work presented by the artist from an urban planning perspective. It shows how the rich and multi-layered metaphor for the 21st-century...
-
Planetary roller extruders in the sustainable development of polymer blends and composites – Past, present and future
PublicationScrew extruders as continuous flow reactors allow the synthesis of new polymers, preparation of polymer blends and composites, and modification or functionalization of commercially available polymers. Literature data shows that the twin screw extrusion is the most popular solution used for this purpose. In contrast, the number of scientific papers on alternative methods, such as multi-screw extruders, is somewhat limited. This...
-
THE INFLUENCE OF HOUSING ARRANGEMENT AND INTERFERENCE ON PRELOAD AND THEORETICAL LIFETIME OF A SYSTEM OF TAPER ROLLER BEARINGS OF A HIGH SPEED SHAFT OF A WIND TURBINE GEARBOX
PublicationA system of two taper roller bearings can carry loads with a high ratio of axial load to radial load. Such a system was proposed for a wind turbine gearbox following the poor durability of original bearing design with the aim of increasing durability. Because of size limits, a proposed system is composed of two different taper roller bearings. Standard manufacturers’ catalogues do not provide information on recommended preload...
-
Hale systemowe GALBOX wykonane całkowicie z kształtowników giętych na zimno
PublicationW artykule przedstawiono hale systemowe Galbox, wykonane z profili giętych na zimno. Zaprezentowano zależność ciężaru hal stalowych dla różnych rozwiązań konstrukcyjnych.
-
Vibration-Based Diagnostics of Radial Clearances and Bolts Loosening in the Bearing Supports of the Heavy-Duty Gearboxes
Publication -
Analysis of Failures of High Speed Shaft Bearing System in a Wind Turbine
PublicationDuring the operation of wind turbines with gearbox of traditional configuration, consisting of one planetary stage and two helical stages high failure rate of high speed shaft bearings is observed. Such a high failures frequency is not reflected in the results of standard calculations of bearing durability. Most probably it can be attributed to atypical failure mechanism. The authors studied problems in 1.5 MW wind turbines of...
-
Distribution of plantar pressure during jogging barefoot or in minimalistic shoes in people who used to run in cushioned shoes
Publication -
Prototype and design of six axis robotic manipulator
PublicationThe paper presents a design of six axis manipulator. The design consists of specially designed solutions for housing, planetary gearboxes and electronics. The manipulator is controlled by a supervisory control system. The use of a series of measuring elements allows to track the current position of each axis and use this to create a cascade control loop with velocity and acceleration feed-forward. The implemented control algorithm...
-
Nowe możliwości generowania zarysów satelitowych mechanizmów roboczych
PublicationPlanetary hydraulic gear motors have been well known since 70's . first motors were constructed for maritime industry by hydroster from gdansk. the evolution of this type of motors led to an increase of nominal pressure and durability. nowadays the industry needs reliable and efficient motor able to work with alternative hydraulic fluids like water, emulsion and vegetable oil. therefore a new type of motors are being developed...
-
Rozwój konstrukcji pomp satelitowych
PublicationArtykuł prezentuje budowę i działanie hydraulicznej pompy satelitowej pompy. Zbudowane i przebadane prototypy nowej pompy wykazały się wysokimi parametrami pracy i zdolnością tłoczenia różnych cieczy: oleju, wody i emulsji HFAE. Mechanizm pompy tworzą dwie nieokrągłe uzębione bieżnie: zewnętrzna obwodnica i wewnętrzna planeta oraz umieszczone pomiędzy nimi koła zębate (satelity). Obecny kształt planety i obwodnicy powoduje szybkie...
-
Mercury concentrations in Antarctic zooplankton with a focus on the krill species, Euphausia superba
PublicationThe Antarctic is the most isolated region in the world; nevertheless, it has not avoided the negative impact of human activity, including the inflow of toxic mercury (Hg). Hg deposited in the Antarctic marine environment can be bioavailable and accumulate in the food web, reaching elevated concentrations in high-trophic-level biota, especially if methylated. Zooplankton, together with
-
Rozrząd silnika satelitowego z obracającym się korpusem
PublicationW artykule opisano problematykę konstrukcji rozrządu w silniku z satelitowym mechanizmem roboczym, w którym obraca się obwodnica, a planeta jest nieruchoma. Wykazano, że w płytach rozrządu liczba otworów dopływu i odpływu jest równa liczbie garbów planety. Przedstawiono również dopuszczalne kształty tych otworów i ich rozmieszczenie w płycie rozrządu. Ponadto wykazano, że jest możliwe zbudowanie działającego silnika satelitowego...
-
Analiza możliwości docierania dwutarczowego wałków w aspekcie kinematyki
PublicationPrzedstawiono kinematykę docierania maszynowego wałków. Analizowano mimośrodowy i planetarny układ wykonawczy docierarek tarczowych
-
Analiza możliwości docierania dwutarczowego wałków w aspekcie kinematyki.
PublicationPrzedstawiono kinematykę docierania maszynowego wałków. Analizowano mimośrodowy i planetarny układ wykonawczy docierarek dwutarczowych.
-
UKŁAD PRZENIESIENIA NAPĘDU TURBINY WIATROWEJ
PublicationIn a most commonly met design of a wind turbine the power is transmitted from the rotor to the generator through the system composed of the main shaft, friction connection, multiplicating gearbox and a flexible coupling. The driving system comprises almost a complete set of the machine elements being described during machine design lectures and can serve as an interesting illustration of the lectures.
-
Drivetrain of a Wind Turbine
PublicationIn a most commonly met design of a wind turbine the power is transmitted from the rotor to the generator through the system composed of the main shaft, friction connection, multiplying gearbox and a flexible coupling. The driving system comprises almost a complete set of the machine elements being described during machine design lectures and can serve as an interesting illustration...
-
Sensitivity of the Baltic Sea level prediction to spatial model resolution
Publicationhe three-dimensional hydrodynamic model of the Baltic Sea (M3D) and...
-
New Design of Axial Piston Pump with Displaced Swash Plate Axis of Rotation for Hydro-Mechanical Transmissions
PublicationThis paper presents a prototype design of an axial piston pump with displaced swash plate axis of rotation in two directions of discharge with electronic control intended for installation on a hydraulic-mechanical gearbox dedicated to working machines. The effect of displacement of the swash plate rotation axis on dead space volume and volumetric efficiency is presented. The construction and principle of operation of the capacity...
-
Thermal and technological aspects of double face grinding of Al2O3 ceramic materials
PublicationDouble face grinding with planetary kinematics is a process to manufacture workpieces with plan parallel functional surfaces, such as bearing rings or sealing shims. In order to increase the economic efficiency of this process, it has to be advanced permanently. The temperature in the contact zone of most grinding processes has a huge influence on the process efficiency and the workpiece qualities. In contrast to most grinding...
-
ANALYSIS OF THE POSSIBILITIES OF HIGH SPEED SHAFT BEARING SYSTEM DURABILITY INCREASE
PublicationDuring the operation of wind turbines with a gearbox of traditional configuration, a high failure rate of high-speed shaft bearings is observed. Such a high failures frequency is not reflected in standard bearing durability calculation methods, which can be attributed to atypical failure mechanism. To avoid observed problems in the 1.5 MW wind turbine, the modification of the existing bearing system is proposed. Multiple options,...
-
Induction motor control application in high-speed train electric drive
PublicationThe chapter presents an application of induction motor mechanical speed and load torque observers in high-speed train drives. The observers are applied for a 1.2-MW electric drive with an induction motor. The goal of using such observers is to utilize computed variables for diagnostic purposes of speed sensors and torque transmission system. The concept of diagnostic system is presented in this paper, and proper criteria are proposed....
-
Mercury in suspended matter of the Gulf of Gdańsk: Origin, distribution and transport at the land–sea interface
PublicationThe coastal regions of inland seas are particularly vulnerable to Hg pollution. An important carrier of toxic Hg in the marine environment is suspended matter originating from multiple sources. The present study was conducted in the Gulf...
-
Low-energy interactions related to atmospheric and extreme conditions
PublicationThis Topical Issue, entitled “Low-Energy Interactions Related to Atmospheric and Extreme Conditions”, showcases a collection of eighteen articles that reported recent theoretical and experimental findings pertaining to the following topics: – low-energy interactions of charged particles (electrons [1–7], protons [8], positrons [9]), and photons [10] with atoms and molecules of biological [1–4,7,8], astrochemical [10], industrial,...
-
POMERANIAN LANDSCAPES OF MODERNIST ZASPA. CONCEPTS OF REVITALISATION OF THE HOUSING ESTATE
PublicationZaspa is a neighbourhood in Gdansk with a long locational history and numerous build-ups. It is situated in a complex landscape between the coastal strip and moraine hills. The housing estates built here in the 1970s followed the postulates of modernist urbanism, ignoring the topographical and natural specifics and the regional heritage. The result was an ergonomic but anonymous space with many current strengths...
-
Symulacje architektoniczne baz pozaziemskich.
PublicationPoszerzanie wiedzy na temat kosmosu oraz rozwój technologiczny pozwalaja na coraz śmielszą eksplorację przestrzeni pozaziemskiej przez ludzi. Ze względu na planowanie założenia baz planetarnych w przyszłości, opracowuje się koncepcje architektoniczne dotyczące wyglądu takich habitatów. Wykonuje się je na podstawie danych dotyczących ekstremalnych warunków panujacych na innych planetach, przeprowadzaniu badań i symulacji.
-
Eulerian motion magnification applied to structural health monitoring of wind turbines
PublicationSeveral types of defects may occur in wind turbines, as physical damage of blades or gearbox malfunction. A wind farm monitoring and damage prediction system is built to observe abnormal vibrations of elements of wind turbine: blades, nacelle, and tower. Contactless methods are developed which do not require turbine stopping. In this work, structural health monitoring of a wind turbine is evaluated using a conversion from the captured...
-
Rendering planet w czasie rzeczywistym
PublicationArtykuł ten ma za cel przedstawić techniki dynamicznego tworzenia i renderowania planet. Opisuje on sposoby, dzięki którym można z dowolnym stopniem dokładności przedstawiać powierzchnię planety w czasie rzeczywistym, używając do tego celu takich technik, jak megateksturing, dynamiczny poziom dokładności i inne.
-
Microbiological Survey in Two Arctic Fjords: Total Bacterial Number and Biomass Comparison of Hornsund and Kongsfjorden
PublicationTwo microbiological parameters: total bacterial number (TBN) and biomass (BBM) were studied in two Arctic fjords: Hornsund and Kongsfjorden. Samples were collected from three sampling points in each fjord, from various water depth layers: from the surface to 75 m depth. Total bacterial number and biomass were examined using the DAPI staining and direct count method. The greater amount of bacteria, as well as highest bacterial biomass...
-
Earthquake-Induced Structural Pounding
PublicationEarthquake-induced structural pounding between insufficiently separated build-ings, or bridge segments, has been repeatedly observed during ground motions. The reports after earthquakes indicate that it may lead to some local damage in the case of moderate seismic events or may result in considerable destruction or even collapse of colliding structures during severe ground motions. Pounding in build-ings is usually caused by the...
-
Modeling of Ice Passage Through Reservoirs System on the Vistula River
PublicationNumerical model was used to assess ice passage through proposed reservoir on the lower Vistula River. Model results were compared with observation on the Vistula River, but because the dam is not constructed yet, the direct comparison was not possible. The study focused on ice movement and accumulation in the reservoir for variety of low flow condition with and without wind effect. Bridge’s piers in the upper part of the reservoir...
-
The Quality of the Outflow from Conventional WWTPs and Treatment Wetlands
PublicationUntil recently the humic substances were considered to have no negative impact on human health. Therefore elimination of these substances from potable water was only performed due to aesthetic reasons. In the recent years, however, it was found out that humic substances may cause unacceptable smell of water or cumulate toxic substances by complexing metal ions and adsorption of persistent organic pollutants such as pesticides,...
-
Storm Water Treatment in TWs
Publication.
-
Domestic Wastewater Treatment
PublicationSSF systems are usually applied at the 2nd stage of domestic wastewater treatment, after mechanical treatment. The number of such installations working at the moment in Europe is estimated to be 100,000. In Germany about 10,000 systems are in operation.
-
Landfill Leachate Treatment in Treatment Wetlands
Publication.
-
Dewatering of Sewage Sludge Dewatering in Reed Systems
Publication.
-
Hydraulic Conditions of Flood Wave Propagation in the Valley of the Narew River after the Siemianówka Dam Overtopping Failure
PublicationW pracy przedstawiono prognozę propagacji fali powodziowej w dolinie rzeki Narwi wywołanej potencjalną przelaniem się wody przez koronę zapory Siemianówka. Do modelowania hydrodynamiki przepływu powodziowego wykorzystano model jednowymiarowy w formie równań de Saint-Venanta. Opisano również mechanizm powstawania rozmycia w ziemnej zaporze zbiornika i przedstawiono model tworzenia się wyrwy w korpusie zapory. Wykonane obliczenia...
-
Types of Treatment Wetlands
PublicationThe removal of pollutants in treatment wetland systems is the result of the sorption of biochemical pollutants, redox reactions, and a biological activity of microorganisms as well as hydrophytes plants.
-
Characteristics of the Hydrophytes Method
Publication.
-
Numerical Modeling of Water and Ice Dynamics for Analysis of Flow Around the Kiezmark Bridge Piers
PublicationThis paper presents the results of a numerical model study on the effect of ice on the proposed bridge piers in the Vistula River outlet and its effect on flow conditions in the river. The model DynaRICE is used in this study, which is a two-dimensional hydro-ice dynamic numerical model developed for dynamic ice transport and jamming in rivers. To simulate river hydrodynamics in the vicinity of the bridge piers, 2-dimensional numerical...
-
An Experimental Investigation of Pressure Wave Celerity During the Transient Slurry Flow
PublicationTransportation of slurries in pressure pipelines is an example of a complex flow due to specific parameters of transported medium. For practitioners, the economy of designing and maintenance is usually the most important factor. For this reason, most of hydrotransport installations are fairly simple; however, they become more vulnerable to negative effects of the transient flow which can occur in pressure pipelines. As the consequence,...
-
Shallow Water Equations as a Mathematical Model of Whitewater Course Hydrodynamics
PublicationPredicting the positions of local hydraulic phenomena, as well as accurately esti-mating the depth and velocity of the water flow are necessary to correctly config-ure a whitewater canoeing course. Currently, a laboratory and full 3D CFD model-ing are typically used in the design process to meet these needs. The article points to another possibility which can be useful at the preliminary stage of the design. The authors show that...
-
Axial-Flux Permanent-Magnet Dual-Rotor Generator for a Counter-Rotating Wind Turbine
PublicationCoaxial counter-rotating propellers have been widely applied in ships and helicopters for improving the propulsion efficiency and offsetting system reactive torques. Lately, the counter-rotating concept has been introduced into the wind turbine design. Distributed wind power generation systems often require a novel approach in generator design. In this paper, prototype development of axial-flux generator with a counter-rotating...
-
Thermal and technological aspects of double face grinding of C45 carbon steel
PublicationIn grinding, the contact zone temperature is a decisive factor influencing the achievable surface quality and the grinding tool wear. In contrast to other grinding processes, only few information regarding double face grinding with planetary kinematics when processing steel is known up to date. Since the successive substitution of in-dustrial double-sided lapping processes by double-sided grinding, it has become necessary to the...
-
Projektowanie zespołu kompensacji luzów osiowych w silniku satelitowym z wirującym korpusem
PublicationW artykule opisano nowatorską konstrukcję silnika satelitowego zawierającą mechanizm satelitowy o odwróconej kinematyce znamienny tym, że planeta (wirnik) oraz płyty kompensacyjne (rozrządu) są nieruchome a w ruch obrotowy wprawiana jest obwodnica. Obwodnica przekazuje napęd na korpus silnika. Zasilanie silnika odbywa się poprzez jego czop. W artykule opisano również metodykę projektowania zespołu kompensacji luzów osiowych w takim...