Filters
total: 284
-
Catalog
Search results for: POLIOLE
-
Diamine derivatives of dimerized fatty acids and bio-based polyether polyol as sustainable platforms for the synthesis of non-isocyanate polyurethanes
PublicationA series of environmentally friendly non-isocyanate polyurethanes (NIPUs) were successfully prepared via the polyaddition reaction of bio-based polyether polyol-based cyclic carbonate with diamine derivative of dimerized fatty acids. The syntheses of NIPUs were realized by the three-step method in the absence of toxic solvents and, importantly, the process of carbonation did not require the use of elevated pressure. The effect...
-
Bio-Based Polyurethane Composites and Hybrid Composites Containing a New Type of Bio-Polyol and Addition of Natural and Synthetic Fibers
PublicationThis article describes how new bio-based polyol during the liquefaction process can be obtained. Selected polyol was tested in the production of polyurethane resins. Moreover, this research describes the process of manufacturing polyurethane materials and the impact of two different types of fibers—synthetic and natural (glass and sisal fibers)—on the properties of composites. The best properties were achieved at a reaction temperature...
-
Sustainable synthesis of cyclic carbonates from bio‐based polyether polyol: the structure characterization, rheological behaviour and thermal properties
PublicationThe cycloaddition of CO2 to epoxides represents a green efficient method to form bis(cyclic carbonate)s. The main purpose of the work reported in this paper was to examine the effect of the gas flow rate (20, 40, 60 and 100 mL min–1) during carbonation on the conversion yield, chemical structure, rheological behaviour and thermal properties of the prepared compounds. A series of new bis(cyclic carbonate)s was obtained from bio‐based...
-
Characterization of Highly Filled Glass Fiber/Carbon Fiber Polyurethane Composites with the Addition of Bio-Polyol Obtained through Biomass Liquefaction
PublicationThis work aims to investigate the process of obtaining highly filled glass and carbon fiber composites. Composites were manufactured using previously obtained cellulose derived polyol, polymeric methylene diphenyl diisocyanate (pMDI). As a catalyst, dibutyltin dilaurate 95% and Dabco® 33-LV were used. It was found that the addition of carbon and glass fibers into the polymer matrix causes an increase in the mechanical properties...
-
Bio polyetherurethane composites with high content of natural ingredients: hydroxylated soybean oil based polyol, bio glycol and microcrystalline cellulose
PublicationIn our study, we focused on obtaining bio-polyurethane composites using bio-components such as bio glycol, modified natural oil-based polyol, and microcrystalline cellulose (MCC). The pre-polymer method was used to prepare the bio polyurethane matrix. Prepolymer was synthesized using 4,4’-diphenylmethane diisocyanate (MDI) and a polyol mixture containing 50 wt.% of commercial polyether and 50 wt.% of hydroxylated soybean oil (H3)....
-
Badania nad zastosowaniem gliceryny odpadowej pochodzącej z procesu produkcji biopaliw w technologii poliuretanów
PublicationNiniejsza praca obejmuje dwie części. W części teoretycznej przedstawiono aktualny stan rynku poliuretanów. Wskazano uzależnienie rynku od ropy naftowej oraz trendy związane z alternatywnymi surowcami do produkcji poliuretanów. Omówiono użycie olejów roślinnych do produkcji polioli i pianek poliuretanowych. Wskazano, że alternatywą jest wykorzystanie odpadów pochodzących z przetwórstwa surowców odnawialnych, takich jak gliceryna...
-
Bio-Based Polyurethane Networks Derived from Liquefied Sawdust
PublicationThe utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated. The liquefaction process was carried...
-
Bio‑derived polyurethanes obtained by non‑isocyanate route using polyol‑based bis(cyclic carbonate)s—studies on thermal decomposition behavior
PublicationNon-isocyanate polyurethanes (NIPUs) constitute one of the most prospective groups of eco-friendly materials based on their phosgene-free synthesis pathway. Moreover, one of the steps of their obtaining includes the use of carbon dioxide (CO 2 ), which allows for the promotion of the development of carbon dioxide capture and storage technologies. In this work, non- isocyanate polyurethanes were obtained via three-step synthesis...
-
Synthesis and characterisation of polyurethane elastomers with semi-products obtained from polyurethane recycling
PublicationIn this work polyurethane elastomers were synthesised by using different mixtures of a petrochemical and glycerolysate polyols and 4,4-diphenylmethane diisocyanate (MDI). Glycerolysate polyol was produced from polyurethane foam decomposition using crude glycerine as a decomposition agent. The structure and thermal properties of obtained semi-product were similar to the polyol used in the synthesis of original foam. Glycerolysate...
-
Influence of bio-polyols with different molecular weight on properites of PUR-PIR foams
Open Research DataThis work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties of rigid polyurethane-polyisocyanurate (PUR-PIR). The influence of bio-polyols addition on foam properties was investigated by mechanical testing, Fourier transform infrared spectroscopy...
-
Bio-based polyester polyols for polyurethane foams - chemical structure of reference sample
Open Research DataPresented dataset includes the results of FTIR and H NMR spectroscopy of bio-based polyester polyol - poly(propylene succinate) (reference sample for materials obtained during MINIATURA 4 project realization).
-
bio-based polyester polyols - chemical structure of Miniatura 4 proper samples
Open Research DataPresented results are related with project MINIATURA 4 realization. At the document, the chemical structure of bio-based polyester polyols (poly(propylene-co-propan-1,2,3-triol succinate)s) are presented as analysis of FTIR and H NMR spectroscopy.
-
Liquefaction of macroalgae Enteromorpha biomass for the preparation of biopolyols by using crude glycerol
PublicationThis article describes the liquefaction process of macroalgae Enteromorpha with the use of crude glycerol as a solvent and a reagent, aimed at obtaining of new bio-polyols, which are characterized with respect to their chemical structure, physical and thermal properties. Six different biopolyols were prepared. In order to optimize the liquefaction of algal biomass for the best bio-polyol properties, two catalysts (sulfuric or orthophosphoric...
-
Glikoliza odpadów poliuretanowych. Cz. I. Środki glikolizujące i katalizatory
PublicationW artykule przeglądowym omówiono glikolizę, która jest jednym z najważniejszych procesów chemicznych, mogącym znaleźć zastosowanie w recyklingu surowcowym odpadowych poliuretanów. We wstępie przedstawiono reakcje transestryfikacji wiązań uretanowych i mocznikowych. Omówiono ważniejsze reakcje zachodzące podczas złożonego procesu glikolizy, w wyniku których otrzymujemy mieszaninę produktów zawierającą poliole, związki o budowie...
-
Biopolyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal characterization
PublicationIn this work lignocellulose biomass liquefaction was used to produce biopolyols suitable for the manufacturing of rigid polyurethane foams. In order to better evaluate the mechanism of the process, pure cellulose was applied as a raw material. The effect of time and temperature on the effectiveness of liquefaction and the parameters of resulting biopolyols were characterized. The prepared materials were analyzed in terms of their...
-
Structure analysis and thermal degradation characteristics of bio-based poly(propylene succinate)s obtained by using different catalyst amounts
PublicationLinear bio-based polyester polyols were prepared with the use of succinic acid and 1.3-propanediol (both with natural origin). As a catalyst was used tetraisopropyl orthotitanate (TPT). In order to determine the effect of various catalyst content on the thermal degradation characteristics, three different TPT amounts, as a 1.3-propanediol equivalent, were used, namely 0.1 mass% (PPS-0.1), 0.2 mass% (PPS-0.2) and 0.25 mass% (PPS-0.25)....
-
Eco-Friendly Ether and Ester-Urethane Prepolymer: Structure, Processing and Properties
PublicationThis study concerns bio-based urethane prepolymers. The relationship between the chemical structure and the thermal and processing parameters of bio-based isocyanate-terminated ether and ester-urethane prepolymers was investigated. Bio-based prepolymers were obtained with the use of bio-monomers such as bio-based diisocyanate, bio-based polyether polyol or polyester polyols. In addition to their composition, the bio-based prepolymers...
-
Biobased Ultralow-Density Polyurethane Foams with Enhanced Recyclability
PublicationPolyurethane (PUR) foams are widely used in many engineering applications, but their efficient recycling has remained a major challenge for many years. This study presents a novel strategy of incorporating hydrolyzable ester units into the PUR structure to enhance PUR foam recyclability. The present ecodesign concept of PUR materials enables fully the replacement of petrochemical polyols with biobased alternatives and production...
-
Effect of bio-based components on the chemical structure, thermal stability and mechanical properties of green thermoplastic polyurethane elastomers
PublicationIt seems to be obvious that conditions changes during polyols synthesis have impact on the polyols properties. Even the chemical formula is the same or similar, physicochemical properties and also molecular weight of polyols might be different and are significant in term of future polyurethanes properties and processing. In this work, fully bio-based poly(propylene succinate)s synthesized at different temperature conditions were...
-
The Police Review Quarterly
Journals -
Towards sustainable catalyst-free biomass-based polyurethane-wood composites (PU-WC): From valorization and liquefaction to future generation of biocomposites
PublicationA substantial aspect of materials engineering lies in the responsible process of designing polymer-based materials. Due to environmental pollution, excessive consumption of natural resources, and increasing environmental awareness of society, there is a massive need for polyurethane (PU) materials with reduced environmental impact. To date, research on catalyst-free polyurethane-wood composites (PU-WC) has demonstrated a huge potential...
-
Revue Internationale de Criminologie et de Police Technique et Scientifique
Journals -
Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties
PublicationThe present study examined the application of polyols obtained via microwave-assisted liquefaction of lignin in the production of rigid polyurethane foam. Lignin was liquefed in crude glycerol and 1,4-butanediol at diferent temperatures (130–170 °C), without a catalyst and using various biomass concentrations (15 and 30 wt%). The physicochemical properties, process yield, and FTIR-based identifcation of the obtained polyols were...
-
Ekologiczne łożysko foliowe smarowane wodą - budowa i analiza wpływu wybranych parametrów konstrukcyjnych na sztywność podparcia łożyska = Environmentaly friendly water lubricated foil braing-design and influence analysis of selected design parameters bearing support stiffness
PublicationW artykule opisano budowę prototypowego łożyska foliowego smarowanego wodą ze szczególnym uwzględnieniem wpływu geometrii elementów podatnych łożyska na jego sztywność. Opisano technologię jego wykonania oraz model obliczeniowy łożyska opracowany z wykorzystaniem MES, przedstawiono wyniki wybranych analiz obliczeniowych.
-
Elastic polyurethane foams containing graphene nanoplatelets
PublicationElastic polyurethane foams were produced from two-component polyurethane systems (SPECFLEX NE 113 izocyjanian/NR 816 poliol system—SPC and Elastic MBMarket company system POLYOL ET MB 500/ISO ET MB 800—ET) by using a one-step method. The foams were a graphene nanoplatelets (GNP) in the amount ranging from 1 to 2 wt.%. The effect of the nanofiller on polyurethane matrix was determined by analyzing the chemical structure, static...
-
Thermoplastic polyurethanes derived from petrochemical or renewable resources: A comprehensive review
PublicationThermoplastic polyurethanes (TPUs) materials are obtained by the reaction of polyol (ether-, ester-, and carbonate-based diols with average molecular weight in the range from 1,000 to 3,000 g/mol) with aliphatic or aromatic diisocyanates. Synthesized materials consist of the hard and soft segments which are separated in different level. All mechanical and thermal properties of TPUs depend on the chemical structure of used monomers,...
-
Otrzymywanie i właściwości fizyko-mechaniczne sztywnych pianek poliuretanowo-poliglicerynowych
PublicationPrzedmiotem badań były sztywne pianki poliuretanowo-poliglicerynowe otrzymane z poligliceryny, użytej jako nowy substytut petrochemicznego poliolu. Sztywne pianki otrzymano metodą jednoetapową przy stosunku grup NCO do OH wynoszącym 2:1. Udział poligliceryny Pole w układach wynosił 35 oraz 70% mas. gramorównoważników poliolu petrochemicznego Rokopolu RF 551. Otrzymane układy scharakteryzowano pod kątem właściwości mechanicznych...
-
Sposób otrzymywania reaktywnych polioli z materiałów drewnopochodnych, reaktywne poliole otrzymane tym sposobem oraz sposób wytwarzania materiałów poliuretanowych z otrzymanych reaktywnych polioli
InventionsPrzetwarzanie odpadów drewnopochodnych z płyt HDF, MDF, pilśniowych, wiórowych, OSB, sklejka, itp. na poliole oraz sposób otrzymywania poliuretanu na bazie tego poliolu.
-
Thermoplastic polyurethanes with glycolysate intermediates from polyurethane waste recycling
PublicationThe polyol is a major component in polyurethane formulations and therefore introducing to the formulation recycled polyol (obtained during decomposition process) allows decreasing the usage of pure petrochemical components. In this work, thermoplastic polyurethanes were prepared using various mixtures of a petrochemical macrodiol poly(ethylene-butylene adipate)diol (PEBA) and a recycled glycolysate intermediate, called glycolysate...
-
Dowodzenie w Policji – koncepcja zmian w zakresie dowodzenia formacją
PublicationThe dynamic development of human civilization at the turn of the 20th and 21st centuries unfortunately generates not only positive developments. So we need to constantly improve crisis management systems. The purpose of the research was to improve the police command system. Primarily, the research was based on the methods of non-standard observation and analysis and logical construction. The article presents the command in the...
-
POLICING-AN INTERNATIONAL JOURNAL OF POLICE STRATEGIES & MANAGEMENT
Journals -
Valorisation of bioplastics synthesised by liquefaction of celluloseusing hetero- and homogeneous catalysts
Open Research DataThe purpose of the present study was to test the effectiveness of a heterogeneous catalyst such as Nafion ion-exchange resin on the cellulose liquefaction process. The results obtained were compared with the bio-polyols obtained in a conventional way, using a homogeneous catalyst (sulfuric acid (VI)). Depending on the catalyst used and the temperature...
-
The influence of different glycerine purities on chemical recycling process of polyurethane waste and resulting semi‐products
PublicationChemical recycling is the most favourable recycling method due to the possibility of polyol recovery. This work is dedicatedto the utilisation of crude glycerine and polyurethane waste. It aims at determining the impact of the use of glycerine fromthe production of biodiesel with various degrees of purity as a cleavage agent on the decomposition process of polyurethanefoam. The influence of glycerine purit y on the chemical structure...
-
Otrzymywanie i właściwości pochodnych kwasów tłuszczowych w układach mikrozdyspergowanych
PublicationOpisano sposób syntezy emulgatorów - pochodnych polioli i kwasów tłuszczowych w układzie mikrozdyspergowanym. Przedstawiono wyniki badań dotyczące możliwości zastosowania monoacylogliceroli do otrzymywania mikroemulsji w układach zawierających różne fazy olejowe oraz wybrane surfaktanty anionowe i pochodne monoacylogliceroli.
-
Wykorzystanie surowców odnawialnych i odpadowych w syntezie poliuretanów
PublicationNa podstawie literatury i badañ w³asnych przedstawiono stan wiedzy na temat mo¿liwooeci stosowania w syntezie poliuretanów surowców odnawialnych i odpadowych, g³ównie polioli pochodzenia rooelinnego, gliceryny odpadowej z produkcji biodiesla i oleju talowego.
-
Renewable Resources for Polyurethanes and Polyurethane Composites: A Review
PublicationEach year, more than two million tons of polyurethane is produced in the EU by reacting isocyanates with polyols made from fossil fuel. In addition, there are appreciable quantities of petroleum based functional additives applied in the industry nowadays for both polyols and polyurethane materials. It is therefore of key importance to develop sustainable economically viable polyols with enhanced functionalities, and thereby reducing...
-
The study on application of biopolyols obtained by cellulose biomass liquefaction performed with crude glycerol for the synthesis of rigid polyurethane foams
PublicationIn this work rigid polyurethane foams (PUR) were obtained by replacement of 0–70 wt% of petrochemical polyol with bio-polyol obtained via cellulose liquefaction in presence of crude glycerol. The foams with different content of a bio-polyol were prepared by single step method for NCO/OH ratio equals 1.5. The prepared materials were analyzed in terms of their morphology, chemical structure, thermal stability and basic physical and...
-
Fully bio-based poly(propylene succinate) synthesis and investigation of thermal degradation kinetics with released gases analysis
PublicationOne of the most important information about polyesters is their thermal stability and phase transition tem- peratures. These characteristics give information about the promising behavior of the polyester during proces- sing. In this work, linear bio-based polyester polyols were prepared with the use of succinic acid and 1.3- propanediol (both with natural origin). As a polycondensation catalyst was used tetraisopropyl orthotitanate...
-
Struktura i właściwości sztywnych pianek poliuretanowo-poliglicerynowych
PublicationSztywne pianki poliuretanowo-poliglicerynowe otrzymano jednoetapową metodą przy stosunku grup izocyjanianowych do grup hydroksylowych wynoszącym NCO/OH = 2. Użyto poliglicerynę Pole jako substrat poliolowy w ilości 35 i 70% mas. gramorównoważników poliolu petrochemicznego Rokopol RF 551. Następnie otrzymane układy scharakteryzowano pod kątem struktury i właściwości użytkowych.
-
Comparison of the Efficiency of Hetero- and Homogeneous Catalysts in Cellulose Liquefaction
PublicationBiomass liquefaction is a well-known and extensively described process. Hydrothermal processes are well understood and can be used in the fuel industry. The use of organic solvents can result in full-fledged products for use in the synthesis of polyurethanes. The plastics industry, including polyurethanes, is targeting new, more environmentally friendly solutions. One of these is the replacement of petrochemical polyols with compounds...
-
Advanced coating of interior of tanks for rising environmental safety of tankers - novel applications of polyurethanes
PublicationOpisano technologię nanoszenia ciekłego systemu poliuretanowego na niewygrzewane elementy stalowe i stalowo-betonowe oraz sposób łączenia powłoki poliuretanowej z wymienionymi materiałami, a także między sobą przy użyciu odpowiednich środków adhezyjnych. Scharakteryzowano metodę utylizacji i odzysku polioli z zużytych w badaniach powłok poliuretanowych w recyklingu surowcowym poprzez zastosowanie małoczšsteczkowych glikoli jako...
-
Obciążenia hydrodynamiczne elementów konstrukcji podwodnych
PublicationW artykule dokonano analizy hydrodynamicznej elementu konstrukcji podwodnej. Konstrukcja posadowiona jest na dnie morza w strefie brzegowej. Dno jest gruntem nieprzepuszczalnym wody. Elementy konstrukcji podwodnej mają kształt „nóg” jak na rys.1. Falowanie wody wywołuje pole ciśnień na elementy podwodne. Obciążenia hydrodynamiczne na powierzchniach zwilżonych wyznaczono przez całkowanie rozkładów ciśnień. Są to siły poziome i pionowe....
-
Miasto nocą: zaburzenia snu a praca zmianowa i stres zawodowy wśród policjantów
PublicationStreszczenie. Jedną z miar subiektywnej jakości życia jest dobry sen. Cebulowa teoria szczęścia postuluje zależność pomiędzy dobrostanami cząstkowymi. Celem studium była ocena zaburzeń snu wśród policjantów z miejskich komisariatów Policji w zależności od cech pracy (stres zawodowy) i jej organizacji (zmianowość). Rezultaty pokazały, że większe problemy ze snem mieli policjanci pracujący wyłącznie na zmianach dziennych niż pracujący...
-
Synthesis of polyglycerol esters of fatty acid with defined hydrophilic properties
PublicationOtrzymane w odrębnej reakcji mieszaniny poligliceroli poddano estryfikacji kwasami tłuszczowymi oktadekanowym i izooktadekanowym, w obecności odpowiednich mydeł sodu powstających in situ. Zaobserwowano wpływ stężenia karboksylanów sodu oraz budowy kwasu tłuszczowego na przebieg estryfikacji mieszaniny polioli. Stwierdzono, że zastosowany sposób prowadzenia reakcji pozwala zsyntetyzować efektywne emulgatory emulsji O/W, o wartościach...
-
Structure versus hydrolytic and thermal stability of bio-based thermoplastic polyurethane elastomers composed of hard and soft building blocks with high content of green carbon
PublicationNowadays, sustainability plays a key role in the design and synthesis of new materials. One of the methods for the preparation of green materials is incorporation into their structure the monomers with a high content of green carbon. Therefore, the aim of this work was to investigate the influence of the type and molecular mass of two bio-based polyester polyols and bio-glycol on the properties of aliphatic partially bio-based...
-
Investigation of Thermoplastic Polyurethanes Synthesized via Two Different Prepolymers
PublicationThe man aim of this work was to investigate the effect of the molecular weight of polyols, mixture of prepolymers, and [NCO]/[OH] molar ratio used during the prepolymer chain extending step on the chemical structure, thermomechanical and mechanical properties, and thermal stability of thermoplastic poly(ether-urethane)s In this work thermoplastic poly(ether-urethane)s were synthesized by using polyols with a various molecular weight,...
-
Polyisocyanates from Sustainable Resources
PublicationIsocyanates, next to polyols, constitute the major components essential for polyurethane (PU) production. They have a significant impact on physicochemical, mechanical, and thermal properties of PU materials. They also have an impact on those materials’ purposes, forms, textures, and other features. The available and used isocyanates are of a petrochemical origin. With the development of a trend toward green chemistry in the science...
-
Polyglycerol esters of lauric acid with defined hydrophile-lipophile properties.
PublicationZsyntetyzowano estrowe pochodne poligliceroli i kwasu laurynowego w obecności laurynianu sodu powstającego in situ. Przeanalizowano wpływ temperatury, stężenia katalizatora oraz czasu reakcji na postęp reakcji polimeryzacji glicerolu, a także wpływ stężenia karboksylanu i czasu reakcji na reakcję estryfikacji uzyskanej mieszaniny polioli kwasem laurynowym. Zauważono, że zastosowana metoda syntezy estrów poligliceroli prowadzi do...
-
Społeczna odpowiedzialność biznesu w kontekście strategii wybranych spółek posiadających istotne znaczenie dla gospodarki
PublicationPrzedmiotem badań jest analiza sposobów realizacji strategii społecznej odpowiedzialności biznesu przez przez wybrane spółki z udziałem Skarbu Państwa.
-
Iwona Popiołek Dr
People