Publications
Filters
total: 621
Catalog Publications
Year 2017
-
Poultry meat freshness evaluation using electronic nose technology and ultra-fast gas chromatography
PublicationTo ensure that chicken meat products are safe to consume, it is important to be able to reliably determine its shelf-life. To assess the applicability of ultra-fast gas chromatography and electronic nose technology in evaluation of poultry, an analysis of the headspace of ground chicken meat samples refrigerated over a period of 7 days was performed. Chemometric techniques were used to mine additional information from a multiparametric...
-
Portable Electronic Nose Based on Electrochemical Sensors for Food Quality Assessment
PublicationThe steady increase in global consumption puts a strain on agriculture and might lead to a decrease in food quality. Currently used techniques of food analysis are often labour-intensive and time-consuming and require extensive sample preparation. For that reason, there is a demand for novel methods that could be used for rapid food quality assessment. A technique based on the use of an array of chemical sensors for holistic analysis...
-
Photocatalytical degradation of toluene and cyclohexane using LED illumination
PublicationA sol-gel process followed by hydrothermal reaction was used to prepare coupled WO3-TiO2 photocatalysts with varying amounts of WO3 in respect to TiO2 (3 mol% and 5 mol% respectively). Additionally, photocatalysts have been subjected to different calcination temperatures of 400ºC and 800ºC, which allowed us to compare how these affect photodegradation efficiency. Photocatalysts were characterized under a scanning electron microscope,...
-
Performance properties of rigid polyurethane-polyisocyanurate/brewers’ spent grain foamed composites as function of isocyanate index
PublicationIn the presented work, rigid polyurethane-polyisocyanurate (PUR-PIR) foams filled with brewers’ spent grain (BSG) were prepared. The influence of the isocyanate index (II) on its performance was investigated. Foams obtained with higher isocyanate index required a higher amount of hydrofluorocarbon physical blowing agent to provide the same apparent density of material. An increase of isocyanate index resulted in a slight decrease...
-
New procedure for the examination of the degradation of volatile organonitrogen compounds during the treatment of industrial effluents
PublicationWe present a new procedure for the determination of 32 volatile organonitrogen compounds in samples of industrial effluents with a complex matrix. The procedure, based on dispersive liquid–liquid microex-traction followed by gas chromatography with nitrogen-phosphorus and mass spectrometric detection, wasoptimized and validated. Optimization of the extraction included the type of extraction and disperser sol-vent, disperser solvent...
-
Method for the determination of carboxylic acids in industrial effluents using dispersive liquid-liquid microextraction with injection port derivatization gas chromatography–mass spectrometry
PublicationThe paper presents a new method for the determination of 15 carboxylic acids in samples of postoxidative effluents from the production of petroleum bitumens using ion-pair dispersive liquid-liquid microextraction and gas chromatography coupled to mass spectrometry with injection port derivatization. Several parameters related to the extraction and derivatization efficiency were optimized. Under optimized experimental conditions,the...
-
Mechanizm szeregowania procesów w systemie wieloagentowym wspomagającym projektowanie układów sterowania
PublicationW artykule przedstawiono mechanizm szeregowania procesów (symulacji) w systemie wieloagentowym wspomagającym projektowanie układów sterowania. Zaimplementowany algorytm ma za zadanie przydzielanie poszczególnych procesów do jednostek obliczeniowych, tak aby minimalizować czas przetwarzania zapytań przez system. Szeregowanie procesów pozwoliło na zwiększenie wydajności systemu wieloagentowego na poziomie 245%.
-
Magnetic semiconductor photocatalysts for the degradation of recalcitrant chemicals from flow back water
PublicationIn the present study treatability of persistent organic compounds from the flow back water after hydrauling fracturing was investigated. The combination of TiO2 photocatalyst and magnetic oxide nanoparticles enhance the separation and recoverable property of nanosized TiO2 photocatalyst. Fe3O4/ TiO2 and Fe3O4@SiO2/TiO2 nanocomposites were prepared by heteroagglomeration. The photocatalysts’ characteristics by X-ray diffractometry...
-
Liquefaction of macroalgae Enteromorpha biomass for the preparation of biopolyols by using crude glycerol
PublicationThis article describes the liquefaction process of macroalgae Enteromorpha with the use of crude glycerol as a solvent and a reagent, aimed at obtaining of new bio-polyols, which are characterized with respect to their chemical structure, physical and thermal properties. Six different biopolyols were prepared. In order to optimize the liquefaction of algal biomass for the best bio-polyol properties, two catalysts (sulfuric or orthophosphoric...
-
Kapilarna chromatografia gazowa fazy nad-powierzchniowej – HS-CGC w badaniach składu lotnych produktów hydrolizy biomasy ligno-celulozowej – BMLC
PublicationW pracy przedstawiono sposoby obróbki biomasy ligno-celulozowej, których celem jest rozpulchnienie struktury surowca i zwiększenie dostępności struktur dla czynników hydrolizujących. Na podstawie przeglądu literatury wskazano na możliwe do zidentyfikowania związki obecne w hydrolizatach z biomasy ligno-celulozowej. Opracowano metodykę oraz zbadano możliwość oznaczania lotnych produktów hydrolizy chemicznej z wykorzystaniem techniki...
-
Investigation of Air Quality beside a Municipal Landfill: The Fate of Malodour Compounds as a Model VOC
PublicationThis paper presents the results of an investigation on ambient air odour quality in the vicinity of a municipal landfill. The investigations were carried out during the spring–winter and the spring seasons using two types of the electronic nose instrument. The field olfactometers were employed to determine the mean odour concentration, which was from 2.1 to 32.2 ou/m3 depending on the measurement site and season of the year. In...
-
In-Situ Processing of Biocomposites via Reactive Extrusion
PublicationLaw regulations, economic and environmental factors are the main causes for the rapidly growing interests in biocomposites’ research, conducted currently in a number of academic and industrial scientific centers. However, weak polymer matrix/filler interactions, common in biocomposites, result in unsatisfactory mechanical properties, which limit their practical applications. From many attempts performed to solve this problem, in-situ...
-
Insights Into Hydrodynamics of Spinning Fluids Reactor
PublicationSpinning fluids reactor (SFR) is one of the most efficient gas-liquid contacting system with high potential of application in many fields. The unique solution of SFR is the contacting of two spinning fluids which generated centrifugal force. The aim of this study was to investigate the pressure field distribution on the inner surface of reactors dispersing element. Obtained results confirm the high heterogeneity of the field pressure...
-
Enhanced visible light photocatalytic activity of Pt/I-TiO2 in a slurry system and supported on glass packing
PublicationHighly photoactive I/TiO2, Pt/I-TiO2 nanocomposites were obtained using a hydrothermal and wet impregnation method. The incorporation of iodine and modification with 0.05 mol% of platinum leads to enhanced photocatalytic activity as compared to singly doped TiO2 due to the presence of impurity energy level in the structure of TiO2. X-ray diffraction, TEM microscopy, UV–Vis spectroscopy, X-ray photoelectron spectroscopy and BET...
-
Electronic noses: Powerful tools in meat quality assessment
PublicationMain factors that are considered by consumers when choosing meat products are colour and aroma, of which the latter is a more reliable indicator of quality. However, a simple sensory evaluation of hedonistic qualities is often not sufficient to determine whether protein is past its shelf life, and consumption of spoiled meat can lead to serious health hazards. Some volatile compounds can be used as spoilage indicators, and so a...
-
Dynamic Headspace Sampling as an Initial Step for Sample Preparation in Chromatographic Analysis
PublicationThis work represents a brief summary of the use of dynamic headspace (DHS) as a technique for sample preparation in chromatographic analysis. Despite numerous developments in the area of analyte isolation and enrichment, DHS remains one of the fundamental methods used with GC. In our opinion, interest in this technique will not diminish significantly because it conforms to stipulations of green analytical chemistry. Moreover, DHS...
-
Direct measurements of odorous volatile organic compounds present in biosolids cakes by Proton Transfer Reaction – Mass Spectrometry Technique
PublicationThis paper show the results of investigation of concentration of odorous chemical compounds emitted upon ageing of anaerobically stabilised biosolids that could contribute to the overall odour character of nuisance emissions. Biosolids samples from wastewater treatment plant were collected in spring time. Concentrations of volatile organic compounds using a US EPA flux hood and Proton Transfer Reaction-Time of Flight-Mass Spectrometry...
-
Direct Analysis of Samples of Various Origin and Composition Using Specific Types of Mass Spectrometry
PublicationOne of the major sources of error that occur during chemical analysis utilizing the more conventional and established analytical techniques is the possibility of losing part of the analytes during the sample preparation stage. Unfortunately, this sample preparation stage is required to improve analytical sensitivity and precision. Direct techniques have helped to shorten or even bypass the sample preparation stage; and in this...
-
Different Ways to Apply a Measurement Instrument of E-Nose Type to Evaluate Ambient Air Quality with Respect to Odour Nuisance in a Vicinity of Municipal Processing Plants
PublicationThis review paper presents different ways to apply a measurement instrument of e-nose type to evaluate ambient air with respect to detection of the odorants characterized by unpleasant odour in a vicinity of municipal processing plants. An emphasis was put on the following applications of the electronic nose instruments: monitoring networks, remote controlled robots and drones as well as portable devices. Moreover, this paper presents...
-
Determination of Odour Interactions of Three-Component Gas Mixtures Using an Electronic Nose
PublicationThe paper presents an application of an electronic nose prototype comprised of six TGS-type sensors and one PID-type sensor to identify odour interaction phenomena in odorous three-component mixtures. The investigation encompassed eight odorous mixtures—toluene-acetone-triethylamine and formaldehyde-butyric acid-pinene — characterized by different odour intensity and hedonic tone. A principal component regression (PCR) calibration...
-
Determination of odour concentration by TD-GC×GC–TOF-MS and field olfactometry techniques
PublicationField olfactometry is one of the sensory techniques used to determine odour concentration, in atmospheric air, directly in emission sources. A two-dimensional gas chromatography with time of flight mass spectrometer (GC×GC–TOF-MS) allows performing the chemical characterization of various groups of chemical compounds, even in complex mixtures. Application of these techniques enabled determination of odour concentration level in...
-
Design and Application of Magnetic Photocatalysts for Water Treatment. The Effect of Particle Charge on Surface
PublicationCore-interlayer-shell Fe3O4/SiO2/TiO2, CoFe2O4/SiO2/TiO2 and BaFe12O19/SiO2/TiO2 magnetic photocatalysts were obtained. A water-in-oil microemulsion system with suitable surfactants was used for functionalization of the magnetic core with silica interlayer and TiO2-based photocatalyst. Uncoated and coated particles were characterized by electrophoretic meaurements, X-ray diffractometry (XRD), scanning electron microscopy (SEM),...
-
Currently Commercially Available Chemical Sensors Employed for Detection of Volatile Organic Compounds in Outdoor and Indoor Air
PublicationThe paper presents principle of operation and design of the most popular chemical sensors for measurement of volatile organic compounds (VOCs) in outdoor and indoor air. It describes the sensors for evaluation of explosion risk including pellistors and IR-absorption sensors as well as the sensors for detection of toxic compounds such as electrochemical (amperometric), photoionization and semiconductor with solid electrolyte ones....
-
CROSSLINKING OF EPOXY-OLIGOESTERIC MIXTURES IN THE PRESENCE OF DIOXYDIPHENYLPROPANE DIGLYCIDYL ETHER MODIFIED WITH ADIPIC ACID
Publication -
Centralized and Distributed Structures of Intelligent Systems for Aided Design of Ship Automation
PublicationA design process and accepted solutions made during this process, often base on non-formalized knowledge, obtained from designer (expert) intuition and practice. There are no formalized rules assuring the correctness of design solutions. The analysis of design process of ship automation, including ship power system, shows that this process can be supported by application of the artificial intelligence elements. The article presents...
-
Cation sensing by diphenyl-azobenzocrowns
PublicationMetal cations complexation and proton binding by 13- and 16-membered diphenyl-azobenzocrowns and diphenyl-hydroxyazobenzocrowns were studied in acetonitrile using spectroscopic methods: UV–vis spectroscopy, spectrofluorimetry, and 1H NMR spectroscopy. Phenyl moieties in benzene rings were found to affect binding strength alkali and alkaline earth metal cations and hydrogen ion, and affect tautomeric equilibrium of hydroxyazobenzocrowns....
-
Bioelectronic nose: Current status and perspectives
PublicationA characteristic feature of human and animal organs of smell is the ability to identify hundreds of thousands of odours. It is accompanied by particular smell sensations, which are a basic source of information about odour mixture. The main structural elements of biological smell systems are the olfactory receptors. Small differences in a structure of odorous molecules (odorants) can lead to significant change of odour, which is...
-
Anion binding by p-aminoazobenzene-derived aromatic amides: spectroscopic and electrochemical studies
PublicationThe synthesis and complexing properties of p-aminoazobenzene-derived mono-, bis-, and trisamides were described. Ligands 3 and 4 bind anions, including fluorides, chlorides, bromides, acetates, benzoates, dihydrogen phosphates, hydrogen sulfates, and p-toluenesulfonates, in chloroform forming 1 : 1 complexes. The highest value of stability constant was evaluated for the 4-F− complex (log K = 5.63 ± 0.21). On the basis of 1H NMR,...
-
Analysis of odor interactions in ternary gas mixtures using electronic nose
PublicationIn recent years there has been a noticeable increase in interest in the use of electronic noses in analytical chemistry. These devices perform a holistic analysis of the gas mixtures composition, without the separation and identification of its individual components. For this reason e-noses are increasingly replacing the conventional olfactometers, due to the significantly shorter analysis time and possible automation. In the work...
-
Analiza wielokryterialna wariantów systemu zaopatrzenia w wodę zespołu padów
PublicationJednym z istotnych problemów decyzyjnych na etapie potencjalnej eksploatacji gazu z formacji łupkowych jest wybór sposobu zaopatrzenia w wodę kopalni gazu łupkowego. Z uwagi na duże zapotrzebowanie na wodę do procesu szczelinowania kolejno przekazywanych do eksploatacji odwiertów wydobywczych, należy poszukiwać systemu zaopatrzenia w wodę, który zagwarantuje wymaganą jej ilość, a jednocześnie nie będzie zbyt dużym obciążeniem dla...
-
Analiza składu fazy gazowej wytwarzanej podczas fermentacji ciemnej
PublicationFermentacja ciemna umożliwia otrzymywanie bio-wodoru z substratów pochodzenia biologicznego, np. z biomasy ligno-celulozowej. Kontrola i właściwe sterowanie przebiegiem procesu fermentacji ciemnej wymaga bieżącego monitoringu składu powstającej fazy gazowej. W niniejszej pracy przedstawiono metodykę analizy składu fazy gazowej z wykorzystaniem techniki GC-TCD-FID. Zaproponowana metodyka umożliwia oznaczenie następujących gazów...
-
1,3,4-Thiadiazole-based diamides: Synthesis and complexation properties
PublicationAromatic diamides, derivative of 2,6-pyridinedicarboxylic acid and isophthalic acid, bearing 1,3,4-thiadiazole residue were prepared with satisfactory yields in conventional procedures and microwave stimulated reactions. X-ray structure of N,N-bis (1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide (2) DMSO solvate (2DMSO) was described. Selective zinc(II), lanthanum(III), terbium(III) and L-tyrosine recognition was found for N,N-bis(1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide...
Year 2016
-
WYKORZYSTANIE TECHNIK OLFAKTOMETRII TERENOWEJ I GC×GC-TOFMS DO OCENY UCIĄŻLIWOŚCI ZAPACHOWEJ POWIETRZA ATMOSFERYCZNEGO NA OBSZARACH PRZYLEGŁYCH DO SKŁADOWISKA ODPADOW KOMUNALNYCH W GDAŃSKU SZADÓŁKACH
PublicationW artykule przedstawiono wyniki badań przeprowadzonych na obszarach sąsiadujących ze składowiskiem odpadów komunalnych w Gdańsku-Szadółkach. Do oceny uciążliwości zapachowej powietrza atmosferycznego wykorzystano technikę olfaktometrii terenowej. Narzędziami, których wykorzystanie umożliwia badanie właściwości zapachowych odorantów występujących w powietrzu atmosferycznym in-situ są olfaktometry terenowe, których zastosowanie umożliwia...
-
WYKORZYSTANIE NOWOCZESNYCH TECHNIK INTSTRUMENTALNYCH I SENSORYCZNYCH DO OCENY JAKOŚCI POWIETRZA ATMOSFERYCZNEGO NA TERANACH PRZYLEGŁYCH DO RAFINERII GRUPY LOTOS S.A. W GDAŃSKU
PublicationDynamiczne postępujący rozwój gospodarczy i ekonomiczny wielu krajów przyczynia się do wzrostu emisji zanieczyszczeń do powietrza atmosferycznego. Większość z nich wpływa negatywnie na zdrowie i życie człowieka, oraz przyczynia się do pogorszenia stanu środowiska naturalnego. Na szczególną uwagę zasługują gazy złowonne określane także mianem odorów. Zdecydowaną większość emiterów, których funkcjonowanie wiąże się z uwalnianiem...
-
Właściwości i heterogeniczność skały łupkowej
PublicationScharakteryzowano właściwości skał łupkowych, heterogenicznych i zasobnych w materię organiczną. Łupki wykazują odmienne właściwości w porównaniu do skał konwencjonalnych. Heterogeniczność skał łupkowych objaśnia się od makro- do nanoskali. Zróżnicowanie tekstury i składu łupka przekłada się na niejednorodność materii organicznej, w dużym stopniu stanowiącej o właściwościach zbiornika. Zmienność łupka należy rozpatrywać przy ocenie jego...
-
Uniwersalna instalacja pilotażowa oraz instalacja laboratoryjna
PublicationDo prowadzenia badań fermentacji metanowej zaprojektowano dwa układy badawcze, w skali laboratoryjnej oraz pilotażowej. Badania wykazały, że przy odpowiedniej kontroli procesu fermentacji możliwe jest wykorzystanie frakcji organicznej odpadów komunalnych do ciągłej i stabilnej produkcji biogazu o wysokiej jakości.
-
Transport properties of microemulsions with ionic liquid apolar domains as a function of ionic liquid content
PublicationThe specific conductivity, dynamic viscosity and apparent diffusion coefficient of each of four aqueous ionic liquid microemulsions (IL-MEs) were measured as a function of ionic liquid (IL) content. The investigated systems were composed of water, hydrophobic ILs (1-butyl-3-methylimidazolium hexafluorophosphate or bis(trifluoromethanesulphonyl)imide) and the nonionic surfactant Triton X-100 or its mixture with cosurfactant (butanol)....
-
Thermomechanical reclaiming of ground tire rubber via extrusion at low temperature: Efficiency and limits
Publication -
Thermo-mechanical reclaiming of ground tire rubber via extrusion at low temperature: Efficiency and limits
PublicationThermomechanical reclaiming of ground tire rubber (GTR) was performed at different temperatures (60, 120, and 180°C) using a co-rotating twin-screw extruder. Obtained samples were used in styrene-butadiene rubber (SBR) blends. As reference samples, SBR compounds containing untreated GTR were used. Curing characteristics, static and dynamic mechanical properties, and morphology of the obtained blends were determined. The results...
-
The ILs-assisted solvothermal synthesis of TiO2 spheres: the effect of ionic liquids on morphology and photoactivity of TiO2
PublicationEffect of the ionic liquid (IL) structure (chain length in the imidazolium cation) on morphology and photoactivity of TiO2 particles has been systematically investigated. The TiO2 microspheres have been successfully synthesized via facile solvothermal method assisted by ionic liquids, such as 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-decyl-3-methylimidazolium chloride [DMIM][Cl] using tetra-tert-butyl orthotitanate...
-
The Effect of Calcination Temperature on Structure and Photocatalytic Properties of WO3/TiO2 Nanocomposites
PublicationSeries ofWO3/TiO2 nanocompositeswere obtained by hydrothermal method followed by calcination in the temperature range from 400∘C to 900∘C. The characteristics of photocatalysts by X-ray diffractometry (XRD), scanning electron microscope (SEM), and diffuse reflectance spectroscopy (DRS) showed that increasing the calcination temperature from 400 to 900∘C resulted in change of photocatalytic activity under UV-Vis light.Moreover,...
-
Technologie szczelinowania w eksploatacji gazu z łupków – predykcja składu płynu pozabiegowego
PublicationNiniejsza rozprawa składa się z dwóch głównych części: literaturowej i doświadczalnej. W części literaturowej przedstawiono modele literaturowe dotyczące płynu pozabiegowego. Wskazano, że dobrze opisane zostały modele wykorzystujące dane dotyczące płynu pozabiegowego do optymalizacji oczyszczania odwiertu i zwiększania produkcji. Modele nawiązujące do przedmiotu dysertacji są nieliczne, ograniczone do danych na wybranych formacjach....
-
Technologie ochrony środowiska w przemyśle i energetyce
PublicationPublikacja prezentuje metody oczyszczania powietrza, wody i gleby skażonych podczas produkcji energii w zakładach energetycznych, przemysłowych oraz gospodarstwach domowych. Przedstawia technologie ochrony środowiska w ujęciu chemicznym, fizycznym, mechanicznym
-
Substancje złowonne powstające w oczyszczalniach ścieków i metody oceny ich uciążliwości zapachowej
PublicationW artykule przedstawiono informacje o źródłach emisji substancji złowonnych z oczyszczalni ścieków do otoczenia. Ponadto opisano jakie substancje odpowiadają za występowanie uciążliwości zapachowej i które z nich mogą stanowić potencjalny marker emisji zapachowej. Scharakteryzowano techniki pomiaru stężeń substancji złowonnych zarówno sensoryczne jak i instrumentalne jednocześnie określając ich użyteczność praktyczną. W pracy przedstawiono...
-
Styrene-Butadiene Rubber/Modified Ground Tire Rubber Blends Co-Vulcanization: Effect of Accelerator Type
PublicationGround tire rubber was thermo-mechanically modified with using a co-rotating twin screw extruder. Modification of GTR was conducted in autothermal conditions. Styrene-butadiene rubber and modified ground tire rubber blends were prepared via two-roll milling. Obtained compounds were cured with conventional system (sulfur/vulcanization accelerator ratio was 2:1). During this research three commonly vulcanization accelerators (MBT,...
-
STRĄCANIE WĘGLANU WAPNIA Z WYKORZYSTANIEM ODPADOWEGO ROZTWORU CHLORKU WAPNIA
PublicationWęglan wapnia strącano z modelowych roztworów chlorku wapnia w reaktorze typu gaz(CO2)-lift za pomocą gazowego dwutlenku węgla w obecności amoniaku. Wydajność strącanego węglanu wapnia wynosiła około 70%. Cząstki CaCO3 charakteryzowały się monomodalnymi rozkładami wielkości, a ich średnia średnica wynosiła od 11,8 do 28 um. Zaproponowana metoda pozwala na wykorzystanie roztworu chlorku wapnia, który jest odpadem w technologii Solvay'a...
-
Rozproszony system wieloagentowy wspomagający projektowanie wybranych układów Sterowania.
PublicationW artykule przedstawiono system wieloagentowy wspomagający projektowanie wybranych układów sterowania sterami strumieniowymi. Zaimplementowany system składa się z czterech niezależnych programów komputerowych (agentów), które poprzez realizację unikalnych algorytmów oraz wzajemną komunikację dobierają odpowiednią strukturę i elementy układu sterowania oraz po przeprowadzeniu badań symulacyjnych dokonują oceny jakości otrzymanego...
-
Release of selected chemical elements from shale drill cuttings to aqueous solutions of different pH
PublicationThe effect of pH changes on leachability of light and heavy metals from shale drill cuttings generated from unconventional shale gas production was investigated. Cuttings, being the primary byproduct generated from drilling operations, belong to the potentially hazardous type of wastes due to presence of heavy and radioactive elements and remains of drilling fluid. In this regard, assessment of potentially dangerous components...
-
Recycled Polyethylene terephthalate (PET) as Construction Material in Civil Engineering: A Review
PublicationIn general, the quantity of plastics of all types consumed annually all over the world has been growing in a phenomenal way. The manufacturing processes, service industries and municipal solid wastes (MSW) generate numerous waste plastic materials. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. It is believed that the management of solid...
-
RECENT DEVELOPMENTS IN POLYURETHANE FOAMS CONTAINING LOW-COST AND PRO-ECOLOGICAL MODIFIERS
Publication