Wyniki wyszukiwania dla: STATIC MECHANICAL PROPERTIES

• Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle

  Publikacja

  • M. Galeja
  • A. Hejna
  • P. Kosmela
  • A. Kulawik

  - Materials - Rok 2020

  Due to the rapid growth of 3D printing popularity, including fused deposition modeling (FDM), as one of the most common technologies, the proper understanding of the process and influence of its parameters on resulting products is crucial for its development. One of the most crucial parameters of FDM printing is the raster angle and mutual arrangement of the following filament layers. Presented research work aims to evaluate different...

  Pełny tekst do pobrania w portalu

• Effect of Compounding Conditions on Static and Dynamic Mechanical Properties of High Density Polyethylene/Ground Tire Rubber Blends

  Publikacja

  • K. Formela
  • M. Formela
  • J. Korol

  - INTERNATIONAL POLYMER PROCESSING - Rok 2014

  Searching for new and cost-effective methods of waste rubber recycling is a subject of research in many scientific centers in the world. In this paper there are presented results of the research of the extrusion process of cheap and environmentally friendly thermoplastic compositions containing 50 % wt. of masses of ground tire rubber (GTR). The aim of this study was to determine the relationship between the mixing conditions and...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical Properties of Implants

  Publikacja

  • A. Tomaszewska

  - Rok 2012

  W pracy przedstawiono wyniki identyfikacji ortogonalnego modelu matematycznego czterech typów implantów stosowanych w laparoskopowym leczeniu przepukliny brzusznej.

• Mechanical and thermomechanical properties of bioelastomers

  Publikacja

  • E. Głowińska
  • J. Datta
  • A. Łukowicz

  - Rok 2012

  Przedstawiono wyniki badań właściwości wytrzymałościowych, modułów stratności i zachowawczych oraz temperatur zeszklenia bioelastomerów zawierających skrobię ziemniaczną lub kukurydzianą. Zbadano także wpływ skrobi oraz czasu wulkanizacji na wybrane właściwości wytworzonych materiałów kompozytowych.

• Experimental study on static and dynamic properties of polymer mass

  Publikacja

  • T. Falborski
  • R. Jankowski

  - Rok 2011

  A new method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure. The aim of the...

• Mechanical response of human thoracic spine ligaments under quasi-static loading: An experimental study

  Publikacja

  • R. Wolny
  • T. Wiczenbach
  • A. J. Andrzejewska-Sroka
  • J. H. Spodnik

  - Journal of the Mechanical Behavior of Biomedical Materials - Rok 2024

  Purpose This study aimed to investigate the geometrical and mechanical properties of human thoracic spine ligaments subjected to uniaxial quasi-static tensile test. Methods Four human thoracic spines, obtained through a body donation program, were utilized for the study. The anterior longitudinal ligament (ALL), posterior longitudinal ligament (PLL), capsular ligament (CL), ligamenta flava (LF), and the interspinous ligament and...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical, thermo-mechanical properties of epoxy/glass composites with submicron particles

  Publikacja

  • J. Datta
  • M. Włoch

  - Rok 2013

  In this research the influence of submicron zinc oxide and silicon dioxide particles on mechanical, thermo-mechanical properties of epoxy matrix composites reinforced with glass fibres was investigated. Composites were fabricated using hand lay-up method. Materials contained 39-41 wt.% of glass fibres. The bending tests, dynamic mechanical analysis and tribological tests were performed on each group of composites and also for...

• Application and mechanical properties of aluminium alloys

  Publikacja

  • A. Ambroziak
  • M. T. Solarczyk

  - Rok 2018

  The paper presents a short survey of the application and mechanical properties of aluminium alloys. This area of scientific research is still developing, the authors restricted it to about 30 papers. Numerical simulations of the aluminium bracket are also investigated. The authors propose a solution to increase the load capacity of aluminium brackets with application of the additional cover plates. This study is proposed as an...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical Properties of Human Stomach Tissue

  Publikacja

  • S. Grymek

  - Rok 2022

  The dataset entitled Determination of mechanical properties of human stomach tissues subjected to uniaxial stretching contains: the length of the sample as a function of the corresponding load (tensile force) and the initial values of the average width and average thickness of the sample. All tests were conducted in a self-developed tensile test machine: PG TissueTester. The dataset allows the coefficients of various models of...

  Pełny tekst do pobrania w portalu

• Mechanical Properties of Human Abdominal Fascia

  Publikacja

  • A. Tomaszewska

  - Rok 2012

  W pracy przedstawiono wyniki identyfikacji modułu sprężystosci i współczynnika Poissona próbek powięzi ściany brzucha człowieka, którą przeprowadzono na podstawie testów jednoosiowego rozciągania.

• Mechanical Properties of Aluminium Bracket Strengthening

  Publikacja

  • A. Ambroziak

  - Archives of Civil Engineering - Rok 2019

  The aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021;...

  Pełny tekst do pobrania w portalu

• Mechanical and Corrosion Properties of Magnesium-Bioceramic Nanocomposites

  Publikacja

  • K. Kowalski
  • M. Nowak
  • M. Jurczyk

  - Archives of Metallurgy and Materials - Rok 2016

  Pełny tekst do pobrania w serwisie zewnętrznym

• Determination of mechanical and hydraulic properties of PVA hydrogels

  Publikacja

  • K. Kazimierska-Drobny
  • M. El
  • M. Kaczmarek

  - Materials Science and Engineering: C - Rok 2015

  Pełny tekst do pobrania w serwisie zewnętrznym

• Influence of steam drying process on wood mechanical properties

  Publikacja

  • J. Barański
  • M. Wierzbowski

  - Annals of WULS, Forestry and Wood Technology - Rok 2012

  Results of influence of gas-steam mixture drying process on mechanical properties of material are presented. Wood species, namely oak (Quercus L.), beech (Fagus L.), pine (Pinus L.) and spruce (Picea K.) from the northern part of Pomerania region in Poland, were subject of air-steam mixture drying process in a laboratory kiln especially arranged for that reason. Measurements of the global coefficient of elasticity and bending strength...

• Experimental tests for the determination of mechanical properties of PVC foil

  Publikacja

  • A. Ambroziak

  - Rok 2016

  The paper presents an application of the PVC film in civil engineering. Mechanical behaviour of the PVC film applied for suspended ceilings, in the form of a stretch ceiling is investigated under uniaxial and biaxial tensile tests. The study is focused on the determination of mechanical properties from experimental data (uniaxial and biaxial tensile tests). The uniaxial cyclic tests are performed in order to observe a variation...

  Pełny tekst do pobrania w serwisie zewnętrznym

• CHARACTERIZATION STUDY ON MECHANICAL PROPERTIES OF POLYESTER COATED FABRIC

  Publikacja

  • A. Ambroziak

  - Archives of Civil Engineering - Rok 2020

  The scope of the paper is to determine the mechanical properties of the Precontraint 1302 polyester coated fabric under uniaxial and biaxial tensile tests. The results are compared for Precontraint 1302 fabric and other types of coated fabrics. The author applied an orthotropic model and a dense net model to reflect the polyester coated fabric performance under uniaxial and biaxial tensile tests. Material parameters are specified...

  Pełny tekst do pobrania w portalu

• Mechanical properties of mosquito nets in the context of hernia repair

  Publikacja

  • A. Ambroziak
  • K. Szepietowska
  • I. Lubowiecka

  - COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - Rok 2016

  The paper deals with issue of applying mosquito nets as implants in hernia repair, which have already been used in resource-poor developing countries. Uniaxial tensile tests have been conducted on polyester mosquito meshes in two orthogonal directions. Non-linear elastic constitutive laws parameters have been identified to be applied in dense net material models. Mechanical performance of tested mosquito nets has been compared...

  Pełny tekst do pobrania w portalu

• Corrosion degradation impact on mechanical properties of structural steel

  Publikacja

  • K. Wołoszyk
  • Y. Garbatov

  - Rok 2023

  Recently, extensive research was conducted regarding the impact of corrosion degradation on the mechanical properties of structural steel. Studies show that at the material level, the microstructure is somewhat unchanged due to corrosion degradation. However, the corrosion causes pits and structural surface irregularities that consequently impact the mean stress-strain response of typical coupon specimens subjected to tensile loading....

  Pełny tekst do pobrania w portalu

• Static and dynamic properties of light PU foam for building the shallow river barges

  Publikacja

  • A. Zieliński
  • W. Witkiewicz

  - Rok 2005

  Przedstawiono wyniki badań wytrzymałości statycznej na rozciąganie, ściskanie i ścinanie oraz zmęczeniowej przy obciążeniach ściskających jednostronnie tętniących pian poliuretanowych o gęstości 53 i 62 kg/m3, mierzonych w kierunku podłużnym i prostopadłym do kierunku wzrostu piany w procesie jej otrzymywania. Stwierdzono wyraźną anizotropię własności mechanicznych piany. Obserwowano znacznie silniejsze zniszczenie zmęczeniowe...

• Chemical and Mechanical Properties of 70-Year-Old Concrete

  Publikacja

  • A. Ambroziak
  • E. Haustein
  • J. Kondrat

  - JOURNAL OF MATERIALS IN CIVIL ENGINEERING - Rok 2019

  The aim of this research is to determine the durability and strength of concrete continuous footing based on the chosen mechanical, physical, and chemical properties of the concrete. The presented investigations constitute some opinions from experts on the bearing capacity of concrete continuous footing and the possibilities of carrying additional loads and extended working life. The cylindrical specimens were taken from continuous...

  Pełny tekst do pobrania w portalu

• Experimental determination of basic mechanical properties of elastomeric polymer

  Publikacja

  • T. Falborski

  - Rok 2012

  There are a lot of different methods of repairing and reinforcing damaged structures, but when it comes to historical buildings and other cultural heritage objects, it is as much about mechanical safety as the aesthetical aspects. Recently, a new and innovative method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been proposed. This new and innovative technique, known as the Flexible...

• Effect of microstructure on mechanical properties of BA1055 bronze castings

  Publikacja

  • J. Łabanowski
  • T. Olkowski

  - Archives of Foundry Engineering - Rok 2014

  The article presents research results performed on aluminum bronze CuAl10Fe5Ni5 (BA1032) castings used for marine propellers. Metallographic studies were made on light microscope and a scanning electron microscope to assess quantitatively and qualitatively the alloy microstructure. It has been shown that the shape, size and distribution of the iron-rich phase precipitates in bronze microstructure significantly affect its mechanical...

  Pełny tekst do pobrania w portalu

• INFLUENCE OF CERAMIC COATING ON MECHANICAL PROPERTIES OF STAINLESS STEEL

  Publikacja

  • D. Czekaj
  • A. Lisińska-Czekaj
  • K. Krzysztofowicz

  - ARCHIVES OF METALLURGY AND MATERIALS - Rok 2020

  Crystal structure and phase composition of stainless steel substrates (AISI 304 type) was studied and it was found that they adopted the cubic symmetry. The calculated elementary cell parameter for the mayor Fe-Ni phase (weight fraction 99%) was a = 3.593 Å, whereas the mean grain size was = 2932 Å. Morphology of the stainless steel substrate surface was studied with profilometry. Mechanical properties of the stainless steel...

  Pełny tekst do pobrania w portalu

• Mechanical properties of dissimilar welded joints for chemical tankers

  Publikacja

  • J. Łabanowski

  - Rok 2005

  Artykuł przedstawia właściwości mechaniczne złączy różnoimiennych stali typu duplex oraz austenitycznej typu 316L otrzymanych za pomocą spawania automatycznego łukiem krytym. Wykazano możliwość wykorzystania wysokowydajnej metody SAW w miejsce dotychczas stosowanych metod GTAW i GMAW do spawania blach zbiorników statków do przewozu chemikaliów. Pomimo obawy uzyskania nieodpowiednich struktur złączy okazało się, że spawanie stali...

• <title>Mechanical properties of hollow optical fibers</title>

  Publikacja

  • R. Romaniuk
  • J. Dorosz
  • R. S. Romaniuk

  - Rok 2006

  Pełny tekst do pobrania w serwisie zewnętrznym

• The morphology and mechanical properties of recyclated polyethylene/polyamide laminate

  Publikacja

  • M. Jastrzębska
  • M. Rutkowska
  • H. Janik
  • J. Seno
  • T. Sabu

  - Polimery - Rok 2009

  Zbadano wpływ kompatybilizatorów na morfologię i właściwości mechaniczne mieszanin PE/PA. Okreslono właściwości recyklatu uzyskanego z odpadów barierowej folii wielowarstwowej zawierającej 80% PE i 20% PA. Po dodaniu kompatybilizatorów układ stał się bardziej jednorodny, zmniejszeniu uległy domeny PA oraz poprawiły się właściwości mechaniczne.

• Influence of selected submicron inorganic particles on mechanical and thermo-mechanical properties of unsaturated polyester/glass composites

  Publikacja

  • J. Datta
  • M. Włoch

  - JOURNAL OF REINFORCED PLASTICS AND COMPOSITES - Rok 2014

  In this paper, the influence of different submicron-scaled particles (zinc oxide, titanium dioxide, or silica) on mechanical and thermo-mechanical properties of unsaturated polyester matrix composites reinforced with glass fabric was investigated. Surface morphology of obtained composites was also examined. At first inorganic particles were mechanically dispersed into unsaturated polyester resin system as per the calculated weight...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Determination of Mechanical Properties of P91 Steel by Means of Magnetic Barkhausen Emission

  Publikacja

  • K. Makowska
  • Z. Kowalewski
  • B. Augustyniak
  • L. Piotrowski

  - Journal of Theoretical and Applied Mechanics - Rok 2014

  In this work, an attempt at determination of mechanical properties by means of a method based on magnetic Barkhausen emission measurements was proposed. The specimens made of P91 steel were subjected to creep or plastic flow which were interrupted after a range of selected time periods in order to achieve specimens with an increasing level of strain. Subsequently, measurements of magnetic Barkhausen emission were carried out, and...

  Pełny tekst do pobrania w portalu

• PROCESSING, MECHANICAL AND THERMAL PROPERTIES OF RECYCLED LOW-DENSITY POLYETHYLENE STREAMS

  Publikacja

  • J. Korol
  • A. Hejna

  - Rok 2020

  The recycling of plastics is currently one of the most significant industrial challenges. Due to the enormous amounts of plastic wastes generated by various industry branches, it is essential to look for the potential methods of their utilization. Nevertheless, for the efficient application of recycled materials it is crucial to analyze their performance. Therefore, in presented paper we investigated the processing (melt flow index),...

  Pełny tekst do pobrania w portalu

• Mechanical properties of PVDF-coated fabric under tensile tests

  Publikacja

  • A. Ambroziak

  - JOURNAL OF POLYMER ENGINEERING - Rok 2015

  This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical properties of the human stomach under uniaxial stress action

  Publikacja

  • G. Rotta
  • J. Kobiela
  • S. Grymek
  • M. Karczewska-Wysocka

  - CURRENT SCIENCE - Rok 2019

  The aim of this study was to estimate the range of mechanical properties of the human stomach in order to use the collected data in numerical modelling of surgical stapling during resections of the stomach. The biomedical tests were conducted in a self-developed tensile test machine. Twenty-two fresh human stomach specimens were used for the experimental study of its general strength. The specimens were obtained from morbidly obese...

  Pełny tekst do pobrania w portalu

• Thermal and mechanical properties of polyurethanes modified with L-ascorbic acid

  Publikacja

  • J. Kucińska-Lipka
  • I. Carayon
  • M. Sienkiewicz

  - JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY - Rok 2017

  In this study we report the thermal and mechanical properties of polyurethanes modified with ascorbic acid (AA). Ascorbic acid was used as a modifier at concentration of 1 or 2 mass%. The antioxidative properties of AA may improve the biocompatibility of the obtained materials, which were designed for biomedical applications. In this paper we describe characterization of obtained unmodified and ascorbic acid modified polyurethanes...

  Pełny tekst do pobrania w portalu

• Processing, Mechanical and Morphological Properties of GTR Modified by SBS Copolymers

  Publikacja

  • A. Susik
  • A. Rodak
  • J. Cañavate
  • X. Colom
  • S. Wang
  • K. Formela

  - Materials - Rok 2023

  In this work, ground tire rubber (GTR) was thermo-mechanically treated in the presence of styrene-butadiene-styrene (SBS) copolymers. During preliminary investigation, the effects of different SBS copolymer grades, the variable content of SBS copolymer on the Mooney viscosity, and the thermal and mechanical properties of modified GTR were determined. Subsequently, GTR modified by SBS copolymer and cross-linking agents (sulfur-based...

  Pełny tekst do pobrania w portalu

• Mechanical Properties of a Dike Formed from a Soil-ash Composite

  Publikacja

  • R. Ossowski
  • K. Gwizdała

  - Rok 2017

  The paper presents the research results on application of composite soils for dike construction. The composite soil is produced by mixing bottom ash (by-product of energetics) with dredged material (sand) taken from the mouth of The Vistula river. The optimum composite for dike core was chosen with respect to mechanical parameters: high internal friction angle, good compaction and reduced hydraulic conductivity. The test dike was...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Influence of thermal effects on mechanical properties of PVDF-coated fabric

  Publikacja

  • A. Ambroziak
  • P. Kłosowski

  - JOURNAL OF REINFORCED PLASTICS AND COMPOSITES - Rok 2014

  This paper describes the method of laboratory tests necessary for identification of temperature influence on mechanical properties of polyvinylidene fluoride-coated polyester fabric often used for tensile structures. Two nonlinear model descriptions are investigated. The first one is based on the piece-wise linear relations between stress and strain and the second one on the Murnaghan model of solid behavior. This paper is proposed...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Characterization of structural, thermal and mechanical properties of bismuth silicate glasses

  Publikacja

  • B. Bochentyn
  • A. Warych
  • N. A. Wójcik
  • A. D. Mielewczyk-Gryń
  • J. Karczewski
  • M. Prześniak-Welenc
  • M. Gazda
  • B. Kusz

  - JOURNAL OF NON-CRYSTALLINE SOLIDS - Rok 2016

  he influence of heating and reduction processes on the structural, thermal and mechanical properties of bismuth-silicate glasses has been investigated. Two compositions of glasses: 40Bi2O3–60SiO2 (Bi0.57Si0.43Ox) and 27Bi2O3–73SiO2 (Bi0.43Si0.57Ox) were fabricated by a typical melt quenching technique. Then the reduction in hydrogen at 380 °C for 20, 42 or 67 h was performed. It was found that a 50 μm-thick layer was formed on...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical properties of two-stage concrete modified by silica fume

  Publikacja

  • H. Abdelgader
  • R. Fediuk
  • M. Kurpińska
  • J. Elkhatib
  • G. Murali
  • A. Baranov
  • R. Timokhin

  - Magazine of Civil Engineering [ Инженерно-строительный журнал (Inzhenerno-stroitelnyy zhurnal) ] - Rok 2019

  Abstract. Two-stage concretes, despite the fact that they have proven themselves in various types of construction, have not been studied to the same extent as traditional heavy concretes. Therefore, the article developed the composition of frame concrete with various additives in the composition of the cement-sand mortar. A comparison of the mechanical characteristics of the developed compositions with the addition of silica fume...

  Pełny tekst do pobrania w portalu

• The impact of natural fibers’ characteristics on mechanical properties of the cement composites

  Publikacja

  • M. Kurpińska
  • M. Pawelska-Mazur
  • Y. Gu
  • F. Kurpiński

  - Scientific Reports - Rok 2022

  The paper reviews the properties of cement composites reinforced with short fibres. The effect of natural fibres was investigated: cotton, sisal, jute, ramie, bamboo, and synthetic fibres: polymer and polypropylene. It was noticed that the fibres change the consistency of the mixture up to 15%. In the composite flexural strength tests, a change in strength by +/− 8% was observed, depending on the type of fibres used. The research...

  Pełny tekst do pobrania w portalu

• Effects of mechanical alloying conditions on the properties of Mg-based nanomaterials

  Publikacja

  • K. Kowalski

  - Inżynieria Materiałowa - Rok 2015

  Pełny tekst do pobrania w serwisie zewnętrznym

• Cyclic mechanical stress impact on protective properties of organic coatings

  Publikacja

  • K. Darowicki
  • M. Szociński

  - Rok 2003

  Celem pracy jest zaprezentowanie wyników badań wpływu cyklicznych naprężeń mechanicznych na układy powłoka/metal. Powtarzające się naprężenia mechaniczne zostały zidentyfikowane jako czynnik w znaczącym stopniu przyczyniający się do degradacji powłok. Próbki składające się z powłoki epoksydowej nałożonej na stal St3SAl poddano serii 21000 cykli naprężenie-odpuszczenie. Badania przeprowadzono w zakresie odkształceń elastycznych...

• Physical, Chemical and Mechanical Properties of Novel Poly(Urethaneamideimide)s

  Publikacja

  • B. Masiulanis
  • G. Calusiński
  • J. Haponiuk
  • J. Haponiuk

  - JOURNAL OF BIOMATERIALS APPLICATIONS - Rok 1997

  Pełny tekst do pobrania w serwisie zewnętrznym

• The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites

  Publikacja

  • P. Sikora
  • E. Horszczaruk
  • K. Cendrowski
  • E. Mijowska

  - Nanoscale Research Letters - Rok 2016

  Pełny tekst do pobrania w serwisie zewnętrznym

• The Effect of Nanosilica on the Mechanical Properties of polymer-Cement Composites (PCC)

  Publikacja

  • P. Sikora
  • P. Łukowski
  • K. Cendrowski
  • E. Horszczaruk
  • E. Mijowska

  - Procedia Engineering - Rok 2015

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical properties and corrosion resistance of dissimilar stainless steel welds

  Publikacja

  • J. Łabanowski

  - Archives of Materials Science and Engineering - Rok 2007

  W artykule przedstawiono właściwości mechaniczne oraz odporność korozyjną doczołowych złączy różnoimiennych stali odpornych na korozję, austenitycznej 316L oraz duplex 2205. Blachy o grubości 15 mm spawano automatycznie łukiem krytyn z różnymi energiami liniowymi. Wykazano, że właściwości mechaniczne złączy spełniają wymagania okrętowych towarzystw klasyfikacyjnych, natomiast najbardziej narażoną strefą złącza na działanie korozji...

  Pełny tekst do pobrania w portalu

• Thermal, Mechanical, and Morphological Properties of DPU/Titanate Nanotubes Nanocomposites

  Publikacja

  • G. Lima
  • W. Monteiro
  • M. Hoffmann
  • C. dos
  • B. Toledo
  • S. Einloft
  • J. Dullius
  • A. Campani
  • R. Ligabue

  - Macromolecular Symposia - Rok 2019

  Pełny tekst do pobrania w serwisie zewnętrznym

• Mechanical Properties of Polyester Coated Fabric Subjected to Biaxial Loading

  Publikacja

  • A. Ambroziak

  - JOURNAL OF MATERIALS IN CIVIL ENGINEERING - Rok 2015

  The paper is focused on the comparison between uniaxial and biaxial laboratory test results for polyester coated fabric. A short literature review concerning coated woven fabrics with emphasis on biaxial tensile tests is presented. A description of the polyester-coated fabric under biaxial test by means of constitutive models and material parameter values is proposed. To establish the right values of the ultimate tensile strength,...

  Pełny tekst do pobrania w serwisie zewnętrznym

• The impact of filler thermomechanical modifications on static and dynamic mechanical performance of flexible foamed polyurethane/ground tire rubber/zinc borate composites

  Publikacja

  • A. Hejna
  • P. Kosmela
  • A. Olszewski
  • K. Formela
  • Ł. Zedler
  • A. Piasecki
  • K. Skórczewska

  - Composites Theory and Practice - Rok 2023

  The rapid development of the automotive industry is very beneficial to many aspects of human life, but it is also a very significant environmental burden. The most straightforward impact is related to the generation of exhaust, but the management of post-consumer car parts is also a major challenge. Among them, waste tires are very burdensome due to their enormous numbers. Therefore, it is essential to develop novel, environmentally...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Validation of odor concentration from mechanical-biological treatment piles using static chamber and wind tunnel with different wind speed values

  Publikacja

  • M. Szyłak-Szydłowski

  - JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION - Rok 2017

  Pełny tekst do pobrania w serwisie zewnętrznym

• Reclaimed Rubber/Poly(ε‐caprolactone) Blends: Structure, Mechanical, and Thermal Properties

  Publikacja

  • A. Hejna
  • Ł. Zedler
  • M. Przybysz-Romatowska
  • J. Cañavate
  • X. Colom
  • K. Formela

  - Polymers - Rok 2020

  The amount of elastomeric waste, especially from tires is constantly increasing on a global scale. The recycling of these residua should be considered a priority. Compounding the waste rubbers with other polymers can be an excellent alternative to reuse waste materials. This procedure requires solving the issue of the lack of compatibility between the waste rubber particles and other polymers. Simultaneously, there is a claim for...

  Pełny tekst do pobrania w portalu

• THE INFLUENCE OF PET MECHANICAL PROPERTIES ON SBM PROCESS PARAMETERS – LITERATURE REVIEW

  Publikacja

  • P. Wawrzyniak

  - Prace Studentów Politechniki Wrocławskiej. Seria : Konferencje - Rok 2015

  In the paper it is said about the influence of PET (polyethylene terephthalate) mechanical properties on SBM (stretch blow molding) process output parameters changes. The below paper mentions also about the influence of PET orientation and crystallization processes on mechanical and thermal properties of PET material during SBM process. All mechanical data of PET material and SBM process output parameters changes are from collected...