Filtry
wszystkich: 1061
wybranych: 984
-
Katalog
Filtry wybranego katalogu
Wyniki wyszukiwania dla: optimal thrust allocation
-
Adaptive dynamic control allocation for over-actuated dynamic positioning system based on backstepping method in case of thruster faults
PublikacjaThe objective of the research considered in this paper is dynamic positioning of a nonlinear over-actuated marine vessel in the presence of limited information about thruster forces. First, the adaptive backstepping method is used to estimate the input matrix which will compensate partial loss of actuator effectiveness in the presence of actuator dynamics. Then, the adaptive commanded virtual forces and moment are allocated into...
-
Evaluation of apparent Young׳s modulus of the composite polymer layers used as sliding surfaces in hydrodynamic thrust bearings
PublikacjaHydrodynamic bearings with a polymer sliding layer are able to operate in severe conditions, mainly due to favorable properties of the polymers. The goal of this research was to evaluate apparent Young׳s modulus of two types of the polymer composite layers used for sliding surfaces in hydrodynamic bearings, as a function of temperature. The Young׳s modulus was evaluated on the basis of compression tests carried out on samples obtained...
-
Parametric method for evaluating optimal ship deadweight
PublikacjaThe paper presents a method of choosing the optimal value of the cargo ships deadweight. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper ship for a given transportation task. The deadweight is determined on the basis of a selected economic measure of the transport effectiveness of ship – the Required Freight Rate (RFR). The...
-
Experimental research on a hydrodynamic thrust bearing with hydrostatic lift pockets: Influence of lubrication modes on bearing performance
PublikacjaThe aim of the study is to investigate the performance of a thrust bearing equipped with hydrostatic lift pockets under different lubrication modes. Three types of flat land bearing lubrication modes are studied experimentally: hydrostatic lubrication (HS; forced oil injection to the pockets), hybrid lubrication (HS + HD; hydrostatic lubrication combined with the external forced bearing oil supply) and hydrodynamic lubrication...
-
Temperature measurements in monitoring of large thrust bearings
PublikacjaW pracy przedstwiono krytyczną analizę aktualnych metod diagnostyki dużych hydrodnamicznych łożysk wzdłużnych hydrozespołów elektrowni wodnych. Wykazano niedostatki i zagrożenia płynące ze stosowania diagnostyki opartej na jednopunktowym pomiarze temperatury. Zaprezentowano wstępna koncepcję nowej metody diagnostycznej opartej na odwrotnym zagadnieniu przepływu ciepła.
-
Temperature measurements in monitoring of large thrust bearings
PublikacjaW pracy przedstwiono krytyczną analizę aktualnych metod diagnostyki dużych hydrodnamicznych łożysk wzdłużnych hydrozespołów elektrowni wodnych. Wykazano niedostatki i zagrożenia płynące ze stosowania diagnostyki opartej na jednopunktowym pomiarze temperatury. Zaprezentowano wstępna koncepcję nowej metody diagnostycznej opartej na odwrotnym zagadnieniu przepływu ciepła (IPHC).
-
Temperature Measurements in Monitoring of Large Thrust Bearings
PublikacjaW pracy przedstawiono krytyczną ocenę popularnego systemu diagnostyki dużych łożysk wzdłużnych (np. łożysk nośnych hydrogeneratorów), w którym stosowany jest jednopunktowy pomiar temperatury w klockach łożyskowych. Stwierdzono, że taki układ pomiarowy nie pozwala na bezpieczną eksploatację łożysk, ponieważ posiada bardzo duże opóźnienie czasowe, nie daje informacji o lokalnych zagrożeniach, nie pozwala racjonalnie ustalić poziomów...
-
A PRELIMINARY STUDY ON THE OPTIMAL CHOICE OF AN IMPLANT AND ITS ORIENTATION IN VENTRAL HERNIA REPAIR
PublikacjaThis paper addresses the problem of ventral hernia repair. The main goals are to find an optimal surgical mesh for hernia repair and to define its optimal orientation in the abdominal wall to minimise the maximum force at the tissue-implant juncture. The optimal mesh is chosen from a set of orthotropic meshes with different stiffness ratios for typical hernia placement in the abdominal area. The implant is subjected to an anisotropic...
-
A new optimal algorithm for a time-dependent scheduling problem
PublikacjaIn this article a single machine time-dependent scheduling problem with total completion time criterion is considered. There are n given jobs j_1, ..., j_n and the processing time pi of the i-th job is given by p_i = 1 + b_is_i, where si is the starting time of the i-th job, i = 1, ..., n. If all jobs have different and non-zero deterioration rates and bi > bj => bi >= (b_min+1)/(b_min) b_j + 1/b_min, where b_min = min{b_i}, then...
-
Optimal Multivariable Control for Modified Z-source Based IPT
PublikacjaThis paper describes Z-source based inductive power transfer topologies control approaches. The goal of this work is a multi-variable control approach which involves a constant voltage/constant current control along with an optimal frequency control to obtain maximum efficiency. This control is applied to the wireless power transfer system based on a modified Z-source topology. The description of the control method along with simulation...
-
VIBRATION SURVEILLANCE DURING MILLING OF FLEXIBLE DETAILS WITH A USE OF THE ACTIVE OPTIMAL CONTROL
PublikacjaThe main goal of modern machining operations is to achieve increasingly better performance. High Speed Machining and/or High Performance Cutting, despite a lot of advantages, have also some drawbacks, for example, a possibility of losing stability and development of self-excited chatter vibration. This paper presents an approach of vibration surveillance during high speed milling with a use of active optimal control. Non-stationary...
-
Optimal Components Design for Modified Z-Source Based IPT Approach
PublikacjaThis paper describes components estimation process for IPT approach based on Z-source network. Proposed model covers main parameters of the system and gives efficient way to evaluate optimal parameters for fixed switching frequency and distance.
-
Optimal placement of IMU sensor for the detection of children activity
PublikacjaIn this paper an investigation to determine the optimal placement of IMU sensors for the purpose of children characteristic activity detection is presented. The article compares four different placement of two IMU sensors on human body. Ten healthy volunteers participated within the study. Data were collected firstly from two wireless 9-axial IMU sensors placed at the left and right wrists, then sensors were placed at lower back...
-
A modified method of vibration surveillance by using the optimal control at energy performance index
PublikacjaA method of vibration surveillance by using the optimal control at energy performance index has been creatively modified. The suggested original modification depends on consideration of direct relationship between the measured acceleration signal and the optimal control command. The paper presents the results of experiments and Hardware- in-the-loop simulations of a new active vibration reduction algorithm based on the energy...
-
An optimal sliding mode control based on immune-wavelet algorithm for underwater robotic manipulator
PublikacjaIn this paper, a robust optimal Sliding Mode Controller (SMC) based on new algorithm of Artificial Immune System (AIS) is proposed for trajectory tracking of underwater manipulators. A new AIS algorithm is used to derive optimal values of surface parameters and boundary layer thickness in SMC with considering minimum torques and error. Surface parameters and boundary layer thickness are considered as antibody in AIS and Morlet...
-
Non-Contact Monitoring of ECG in the Home Environment—Selecting Optimal Electrode Configuration
PublikacjaCapacitive electrocardiography (cECG) is most often used in wearable or embedded measurement systems. The latter is considered in the paper. An optimal electrocardiographic lead, as an individual feature, was determined based on model studies. It was defined as the possibly highest value of the R-wave amplitude measured on the back of the examined person. The lead configuration was also analyzed in terms of minimizing its susceptibility...
-
Disk space allocation schemes for real-time data gathering applications
Publikacja -
Optimal control of 2-wheeled mobile robot at energy performance index
PublikacjaThe paper presents the application of the optimal control method at the energy perfor- mance index towards motion control of the 2-wheeled mobile robot. With the use of the proposed method of control the 2-wheeled mobile robot can realise effectively the desired trajectory. The problem of motion control of mobile robots is usually neglected and thus performance of the realisation of the high level control tasks is limited.
-
Modeling lubricant flow between thrust-bearing pads
PublikacjaInlet temperature is one of the main inputs in all models for the analysis of fluid film bearing performance. At the same time, inlettemperature distribution and also oil velocity distribution at the inlet are the result of flow phenomena in the gap between the bearingpads. These phenomena are complex and in many cases further affected by any special arrangements of forced oil supply to the gapbetween pads. The reason for such...
-
Influence of Collar Deformations on Hydrodynamic Thrust Bearing Performance
Publikacja -
Unique performance aspects of PTFE-Lined thrust bearings
PublikacjaW pracy przedstawiono korzyści płynące z zastępowania tradycyjnych stopów łożyskowych przez warstwy ślizgowe wykonane z kompozytów na bazie PTFE. Kompozytowe warstwy ślizgowe są coraz częściej stosowane w dużych łożyskach hydrogeneratorów o pionowych wałach. W pracy omówiono także aspekty stosowania takich łożysk związane z ich charakterystycznymi cechami.
-
The Method of Finding the Optimal Spindle Speed When Milling Flexible Details
PublikacjaThe paper presents a new method of vibration reduction during milling of flexible details. The method consists in selecting the optimal spindle speed, based on the natural frequency of the workpiece. For this purpose, an original method was created, which is based on minimizing the work of cutting forces in the direction of the depth of cutting. The effectiveness of the method has been proved by comparing the RMS values of vibration...
-
Parametrical Method for Determining Optimal Ship Carrying Capacity and Performance of Handling Equipment
PublikacjaThe paper presents a method of evaluating the optimal value of the cargo ships deadweight and the coupled optimal value of cargo handling capacity. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper second hand ship for a given transportation task. The deadweight and the capacity are determined on the basis of a selected economic...
-
Optimal reshaping and stress controlling of double-layer spherical structures under vertical loadings
PublikacjaOptimal reshaping and stress controlling of double-layer spherical structures under vertical loadings
-
Optimal routing in a transportation network
Publikacja -
An optimal form of the finite element mass matrix in the analysis of longitudinal vibrations of rods
PublikacjaIn this paper, an attempt is made to find the optimal form of the mass matrix of a rod finite element, which allows one to obtain the smallest errors in the longitudinal frequency determination of natural vibrations of any boundary conditions within the whole range of determined frequencies. It is assumed that the mass matrix can be treated as a linear combination of the consistent and diagonal matrices. Based on analytical considerations,...
-
Dynamic Positioning Capability Assessment for Ship Design Purposes
PublikacjaThe article focuses on solving a problem of optimal thrust distribution over the actuators in a ship Dynamic Positioning, according to DNV-ST-0111 standard, Level 1. The classic Quadratic Programming approach is combined with the numerical solusion used to handle the propeller with the rudder constraints in the optimization task and the influence between thrusters and skeg. It is presented as an efficient method of minimizing the...
-
Simplified Map-based Selection of Optimal Spindle Speeds When Milling Complex Structures
PublikacjaIn the paper a method for selecting optimal spindle speeds for complex structures during milling operations is presented. It is based on the selection of the spindle speed in accordance with a simple equation resulting from the minimisation of vibration energy, which leads to the minimisation of the work of cut-ting forces presented in previous elaborations by the authors [1]. Optimal spindle speeds are obtained for many points...
-
Centrally Pivoted Tilting Pad Thrust Bearing with Carbon-Based Coated Collar—Experimental Results of Low- and Medium-Speed Operation
PublikacjaExperimental results of the research on a tilting pad thrust bearing with symmetrical pad support in the conditions of high loads and low speeds are presented in the paper. As described in the literature review, experimental results of tilting pad bearings at low speed/high load regime and transient conditions are rare. Unusual material selection - steel pad against a DLC-type coating on the collar was utilized. Such material combination...
-
Performance peculiarities of PTFE-faced tilting-pad thrust bearings.
PublikacjaZastosowanie pokrycia powierzchni ślizgowej z PTFE pozwala na znaczącą poprawę właściwości łożysk wzdłużnych w trudnych warunkach pracy. Znanych jest wiele zastosowań takich łożysk głównie w turbinach wodnych w dawnym ZSRR i Chinach. Praca ta stanowi krótki przegląd specyficznych cech takich łożysk związanych między innymi ze specyfiką kompozytów na bazie PTFE. Omówiono wpływ podatności powierzchni ślizgowej na kształt powierzchni...
-
Optimal Placement of Phasor Measurement Unit in Power System using Meta-Heuristic Algorithms
PublikacjaThe phasor measurement units (PMUs) play an important and vital role in power system monitoring and controlling, since they provide the power system phasors stamped with a common real time reference through a global positioning system (GPS). Indeed, from economical point of view it is not possible to set PMUs in all system buses due to the high cost and the requirement of more complex communication...
-
OPTIMAL WAVELET CHOICE IN ELECTROCHEMICAL EXPERIMENTS
Publikacja -
Optimal inputs in pharmacokinetics model's identification
PublikacjaW pracy przedstawiono zagadnienie optymalizacji pobudzeń dla identyfikacji parametrycznej kompartmentowych modeli zmiennych stanu SISO systemów farmakokinetycznych. Zaimplementowano kryterium w postaci śladu macierzy informacyjnej Fishera (kryterium czułościowe). Rozważono klasę pobudzeń dopuszczalnych o ograniczonej energii, gdyż w przypadku wielu leków zbyt szybkie ich podawanie wiąże się z występowaniem skutków ubocznych. Zadanie...
-
Optimal Control for Discrete Fractional Systems
Publikacja -
Optimal Distribution of the Nonoverlapping Conducting Disks
Publikacja -
Optimal boiling temperature for ORC installation
PublikacjaW pracy przedstawiono oryinalne kryterium wyznaczania optymalnej temperatury odparowania czynnika w obiegu ORC w postaci równań analitycznych. Pokazano przykład obliczeniowy na bazie R134a, wody i etanolu.
-
Optimal Sensor Placement for Damage Detection
PublikacjaW pracy przedstawiono dwie konfiguracje czujników PZT do detekcji uszkodzeń w płytach. Omówion zalety i wady obu konfiguracji.
-
Optimal wavelet choice in electrochemical experiments
PublikacjaW ostatnich latach obserwuje się wzrost zainteresowania łączeniem eksperymentów elektrochemicznych z nowoczesnymi technikami analizy sygnałów. Jednym z najbardziej obiecujących kierunków jest analiza falkowa. W omawianym przypadku istnieje wybór pomiędzy różnymi rodzinami falek w zależności od wymogów danego eksperymentu. W pracy omówione zostały wyniki zastosowania różnych typów falek do analizy szumów elektrochemicznych o różnym...
-
When all we have is not enough: a search for the optimal method of quantifying inflation expectations
PublikacjaAlthough inflation expectations are pivotal variables for central banks, they are not directly observable. Therefore, central banks use qualitative survey results to proxy consumer expectations, and their quantification in this manner is often criticized. In this study, we investigate and identify an optimal quantification procedure for survey results based on a set of regression and probabilistic models. Specifically, we seek...
-
Optimal control at energy performance index of the mobile robots following dynamically created trajectories
PublikacjaIn practice, the problem of motion control of the wheeled mobile robots is often neglected. Wheeled mobile robots are strongly nonlinear systems and restricted by non-holonomic constraints. Motion control of such systems is not trivial task and usage of non-optimal control signals can lead to deterioration of the overall robot system’s performance. In case of autonomous application of the mobile robots all parts of its control...
-
Selecting wells for an optimal design of groundwater monitoring network based on monitoring priority map: A Kish Island case study
PublikacjaThis paper presents a novel approach, i.e. a combination of gamma test and monitoring priority map, for optimal design of groundwater monitoring network (GMN) by considering the cumulative effects of industries, human activities, and natural factors on the groundwater quality. The proposed method was successfully applied to design an optimal network for groundwater salinity monitoring on Kish Island, Persian Gulf. The priority...
-
An Optimal Power Point Tracking Algorithm in a Solar PV Generation System
PublikacjaThe non-linearity in I-V characteristics of a PV panel requires to be operated at knee point to extract maximum power. In order to operate the panel at optimal point, maximum power point tracking (MPPT) algorithm is employed in the control structure. The main objective of MPP tracking is to keep the operation at knee point of I-V characteristics under varying condition of temperature and solar insolation. Under non uniform solar...
-
OPTIMAL FARM SIZE AND EFFECTIVENESS OF AGRICULTURE IN THE EU: THE CASE OF WHEAT YIELDS
PublikacjaThe article concentrates on the relationship between the size of a farm and its efficiency in relation to wheat production in the European Union (EU). The issue is not new, however fundamental from the point of view of the agricultural policy, as the appropriate shape of the agrarian structure affects the economic rationality in agriculture and significantly improves the productivity. We analysed data for the period between 2004...
-
Determination of the optimal curvature of the turnout diverging track for HSR using dynamic analysis
PublikacjaThe paper presents an analytical method of identifying the curvature of the turnout diverging track consisting of sections of varying curvature. Such turnout is mainly applied on High Speed Railway. Both linear and nonlinear (polynomial) curvatures of the turnout diverging track are considered in the paper. Obtained solutions enable to assume curvature values at the beginning and end point of the geometrical layout of the turnout.The...
-
Optimal spindle speed determination for vibration reduction during ball-end milling of flexible details
PublikacjaIn the paper a method of optimal spindle speed determination for vibration reduction during ball-end milling of flexible details is proposed. In order to reduce vibration level, an original procedure of the spindle speed optimisation, based on the Liao–Young criterion, is suggested. As the result, an optimal, constant spindle speed value is determined. For this purpose, on-stationary computational model of machining process is...
-
An analytical hierarchy process for selection of the optimal procedure for resveratrol determination in wine samples
PublikacjaThe study shows the application of analytical hierarchy process (AHP) in ranking the analytical procedures, that are applied for resveratrol determination in wine samples. 19 different analytical methodologies are described by metrological, economic and environmental criteria, that are further divided into 10 subcriteria. Before AHP application, the amount of input data is decreased with cluster analysis. The first run of AHP is...
-
Optimal and suboptimal algorithms for identification of time-varying systems with randomly drifting parameters
PublikacjaNoncausal estimation algorithms, which involve smoothing, can be used for off-line identification of nonstationary systems. Since smoothingis based on both past and future data, it offers increased accuracy compared to causal (tracking) estimation schemes, incorporating past data only. It is shown that efficient smoothing variants of the popular exponentially weighted least squares and Kalman filter-based parameter trackers can...
-
Markowitz’s portfolio theory – optimal length of estimation window for gold and the biggests companies on the Warsaw Stock Exchange
PublikacjaThe following article is dedicated to the construction of an investment portfolio consisting of 3 investments from the Polish capital market found in the WIG20 index and from investment in gold. The purpose of the study was to determine the optimal length of the estimation window for building a portfolio with minimal risk and maximum efficiency. The length of the estimation window was also assessed in terms of the rate of return...
-
Investigating an Optimal Computational Strategy to Retrofit Buildings with Implementing Viscous Dampers
PublikacjaCivil engineering structures may seriously suffer from different damage states re-sult of earthquakes. Nowadays, retrofitting the existing buildings is a serious need among designers. Two important factors of required performance level and cost of retrofitting play a crucial role in the retrofitting approach. In this study, a new optimal computational strategy to retrofit structures by implementing linear Viscous Dampers (VDs)...
-
Determination of optimal rotational speeds of circular saws
PublikacjaW pracy przedstawiono możliwości diagnostyczne stanowiska HewSaw do badania zachowania się pił w funkcji prędkości obrotowej piły. Wykazano, ze wyznaczone wartości prędkości optymalnych badanych pił leżą poniżej wartości zalecanych przez producenta. Praca z prędkościami wyższymi od optymalnych może prowadzić do zwiększenia strat materiałowych, a także stwarzać zagrożenia dla obsługi.