Filtry
wszystkich: 395
Wyniki wyszukiwania dla: experimental work
-
Experimental tests of lintel hybrid beams
PublikacjaThe results of experimental tests of lintel hybrid beams made of air concrete and prestressed concrete were presented in paper. Blocks of air concrete was a protective element for the construction one. The length of hybrid beams was 3.0 m, while total height 27 cm. It was assumed that hybrid beams will work in the simply-supported scheme (with a 10 cm support) loaded uniformly over the entire length. The object of the tests were...
-
Experimental test of nonclassicality with arbitrarily low detection efficiency
PublikacjaWe theoretically introduce and experimentally demonstrate the realization of a nonclassicality test that allows for arbitrarily low detection efficiency without invoking an extra assumption of independence of the devices. Our test and its implementation is set in a prepare-and-measure scenario with an upper limit on the classical communication capacity of the channel through which the systems are communicated. The essence for our...
-
Validating data acquired with experimental multimodal biometric system installed in bank branches
PublikacjaAn experimental system was engineered and implemented in 100 copies inside a real banking environment comprising: dynamic handwritten signature verification, face recognition, bank client voice recognition and hand vein distribution verification. The main purpose of the presented research was to analyze questionnaire responses reflecting user opinions on: comfort, ergonomics, intuitiveness and other aspects of the biometric enrollment...
-
FE analysis of support-specimen interaction of compressive experimental test
PublikacjaThe objective of this work is to investigate the support-specimen interaction during the compressive experimental testing of stiffened plates. The interaction is analyzed employing the nonlinear Finite Element Method using the commercial software ANSYS. The connection between the stiffened plate and testing supports is modelled with the use of contact elements, where several possible interaction scenarios are investigated, and...
-
The influence of the shift work system on dietary factors contributing to the development of cardiovascular diseases
Publikacja -
Theoretical Organic Rankine Cycle efficiency depending on different thermodynamic work variables.
PublikacjaOne of promising technologies of utilizing low- temperature waste heat is through ORC (Organic Rankine Cycle) system implementation. A primary objective in designing in-stallations based on such systems is to maximize the installation's work efficiency. On the other hand, ecological factors are commonly considered a natural barrier in introducing new, often very expensive technologies. Ecological effect of a potential modernization...
-
Uncharacteristic forms of employment and work time management constituting a chance for MSP sector
PublikacjaElastyczność funkcjonowania rynku pracy może być traktowana jako jedna z metod ograniczania nierównowagi pojawiajacej się na lokalnych rynkach pracy oraz sposobu dostosowywania się pracodawców do wahań koniunkturalnych, które w znacznym stopniu wpływają na zmiany w poziomie i strukturze zatrudnienia. Poza tym elastyczne formy zatrudnienia i czasu pracy przyczyniają się do ograniczania kosztów funkcjonowania przedsiębiorstw, co...
-
The energy-time method of estimating the work of ships' main propulsion with hydrodynamic transmission.
PublikacjaW referacie zasygnalizowano potrzebę, a zarazem problem badania układów napędowych (napędów głównych) statków ze śrubami nienastawnymi i nastawnymi oraz przekładniami hydrostatycznymi z pompami o zmiennej wydajności. Zaproponoano koncepcję badań energetycznych takich układów w celu ustalenia, które z tych rozwiązań napędów głównych statków może zapewnić większą sprawność takich napędów podczas ich pracy z różnymi naporami i prędkościami...
-
Relationship between cavitation resistance of laser produced alloys and their ability to work hardening
PublikacjaBadano odporność kawitacyjną laserowo wytworzonych stopów na stalach konstrukcyjnych i ich związek ze zdolnością do umacniania się pod wpływem działania obciążeń kawitacyjnych. Wykazano, że mikrotwardość powierzchni wykazuje monotoniczną zależność z odpornością kawitacyjną i zdolnością do umacniania.
-
The Idea of a Student Research Project as a Method of Preparing a Student for Professional and Scientific Work
PublikacjaIn the paper we present the idea and implementation of a student research project course within the master’s program at the Faculty of Electronics, Telecommunications and Informatics, Gdansk Tech. It aims at preparing students for performing research and scientific tasks in future professional work. We outline the evolution from group projects into research project and the current deployment of both at bachelor’s and master’s levels...
-
POSITIVE PSYCHOLOGICAL CAPITAL ENHANCES THRIVING IN THE MULTICULTURAL WORK ENVIRONMENT OF MULTINATIONAL CORPORATIONS
PublikacjaThe aim of the paper is to examine positive psychological capital (PsyCap) as well as individual factors in the relationship with thriving in the multicultural work environment of multinational corporations (MNCs). We conducted a quantitative study on the sample of 127 individuals from subsidiaries of various MNCs located in Poland and involved in intercultural interactions. The results of cross-sectional study show that employees...
-
The effects of relational and psychological capital on work engagement: the mediation of learning goal orientation
PublikacjaPurpose – This paper proposes a research model in which learning goal orientation (LGO) mediates the impacts of relational capital and psychological capital (PsyCap) on work engagement. Design/methodology/approach – Data obtained from 475 managers and employees in the manufacturing and service industries in Poland were utilized to assess the linkages given above. Common method variance was controlled by the unmeasured latent method...
-
How can the work environment be redesigned to enhance the well-being of individuals with autism?
PublikacjaPurpose – This article examines the opportunities to create optimal conditions for individuals with autism, to work successfully within the contemporary workplace and improve their well-being. These opportunities arise from digital technology (DT) development, enabling the work environment to be remodeled by providing new possibilities and ways of working. The author discusses both technology-based as well as non-technological accommodations...
-
Psychological capital and happiness at work: The mediating role of employee thriving in multinational corporations
PublikacjaWorking in multicultural work environments of multinational corporations (MNCs) creates challenges whose expected impact on happiness is equivocal. In the following paper, we examine the relationship between psychological capital and happiness at work in the specific MNCs’ context. We assume that thriving (eudemonic well-being) at work fosters individuals’ development and enhances their happiness composed of both the affective...
-
Application in circular sawing machines of the experimental results of investigations of the chip removing system operation
PublikacjaThe experimental results of the chip removing system operation are presented. The main aim of them was to optimize suction system of the panel saw Fx3 and its follower Fx550. The attention was focused on the upper casing, which was the part of removing system. Within the framework of the work a systematic experimental study of pressure distribution in the casing during operation of the selected rotational speed of saw blade with...
-
Self-advocates with intellectual disability about their work as social educators – a qualitative Polish study
PublikacjaThe paper presents the opinions of self-advocates with mild intellectual disability about their work as social educators – public self-advocates raising disability awareness. Six semi-structured individual interviews were conducted. Data was analyzed within the framework of Interpretative Phenomenological Analysis. The themes which emerged from the interviews comprise: the motives of educators to work as self-advocates, opportunities...
-
The Influence of Laser Surface Alloying on the Thermal Fatigue Resistance of Hot Work Tool Steels
Publikacja -
Brain Fog and Quality of Life at Work in Non-Hospitalized Patients after COVID-19
Publikacja -
An analysis of the causes and consequences of firefighters’ accidents at work in the State Fire Service in 2010 – 2016
Publikacja -
Lack of control over work and organizational citizenship behavior: overwork climate as a suppressor variable
Publikacja -
Job Demands, Engagement, and Turnover Intentions in Polish Nurses: The Role of Work-Family Interface
PublikacjaBackground: Poland has lower ratios of employed registered nurses per 1,000 inhabitants than the EU average. Polish nurses work under miserable conditions without assisting personnel, and they reconcile their professional demands with responsibilities for their families; 96% of them are women. Rationale/Aims: This study uses Hobfoll’s conservation of resources (CORs) theory to explain the role of various resources in the improvement...
-
Paid work activity and entrepreneurial cognitions of students – evidence from European emerging economies
PublikacjaPurpose – This paper aims to investigate whether paid work activity (PWA) experience of students from five emerging economies is related to academic results and self-assessment of possessed entrepreneurial traits. Additionally, the authors verify the relationship between obtaining work experience and the willingness to start own business among students. Design/methodology/approach – Participants included 3,631 students of the first...
-
Remote communication in Scrum teams - a COVID-19 preventive measure or work time optimisation?
PublikacjaThe article presents the impact of remote work, resulting from the COVID-19 pandemic, on the functioning of Scrum teams. Attempts have been made to analyse the positive and negative aspects of remote work. The article also looks at the impact of remote work on the level of communication and efficiency of Scrum teams. For this purpose, the author conducted research on a sample of 40 organisations that declared to use Scrum methodology,...
-
Experimental and computational study on mechanical behaviour of carpentry corner log joints
PublikacjaThis work concerns experimental and numerical research on carpentry joints used in historic wooden buildings in southeastern Poland and western Ukraine. These structures are mainly sacred buildings, and the types of corner log joints characteristic of this region are primarily saddle-notch and dovetail joints; thus, these two types of joints were analysed in this study. The modelling of historic timber structures is a complex...
-
Towards application of uncertainty quantification procedure combined with experimental procedure for assessment of the accuracy of the DEM approach dedicated for granular flow modeling
PublikacjaThere is a high demand for accurate and fast numerical models for dense granular flows found in many industrial applications. Nevertheless, before numerical model can be used its need to be always validated against experimental data. During the validation, it is important to consider how the measurement data sets, as well as the numerical models, are affected by errors and uncertainties. In this study, the uncertainty quantification...
-
Experimental analysis of chip removing system in circular sawing machine
PublikacjaPaper presents analysis of the process of removing the wood chips generated during the cutting of the material on the circular sawing machine. The attention is focused on the upper cover of the chip removing system. Within the framework of the work a systematic experimental study of pressure distribution in the cover during operation of the selected rotational speed of saw blade with a diameter of 300 mm and 450 mm was carried...
-
Mechanism of Osmolyte Stabilization–Destabilization of Proteins: Experimental Evidence
PublikacjaIn this work, we investigated the influence of stabilizing (N,N,N-trimethylglycine) and destabilizing (urea) osmolytes on the hydration spheres of biomacromolecules in folded forms (trpzip-1 peptide and hen egg white lysozyme─hewl) and unfolded protein models (glycine─GLY and N-methylglycine─NMG) by means of infrared spectroscopy. GLY and NMG were clearly limited as minimal models for unfolded proteins and should be treated with...
-
Textile reinforced concrete members subjected to tension, bending, and in-plane loads: Experimental study and numerical analyses
PublikacjaTextile reinforced concrete has raised increasing research interest during the last years, mainly due to its potential to be used for freeform shell structures involving complex load situations. Yet, most experimental work has focused on test setups with primarily uniaxial loading. In the current work, such setups are complemented with a novel test setup of deep beams, including in-plane bending and shear. Further, nonlinear finite...
-
Supervisory Control System for Adaptive Phase and Work Cycle Management of Sequencing Wastewater Treatment Plant
PublikacjaThe paper presents the design of the integrated control system applied to Sequencing Batch Reactor (SBR) in a biological Wastewater Treatment Plant (WWTP) in Swarzewo, which operates under activated sludge technology. Based on the real data records, ASM2d biological processes model and aeration system model, hierarchical control system for dissolved oxygen tracking and cycle management is designed. Internal Model Controller (IMC)...
-
Influence of increased arterial stiffness on myocardial work efficiency in patients with stable coronary artery disease
Publikacja -
Marcin Kujawa dr hab. inż.
OsobyMarcin Kujawa ukończył studia na Wydziale Budownictwa Lądowego Politechniki Gdańskiej w 1999 roku, uzyskując stopień magistra inżyniera w specjalności mosty. Stopień naukowy doktora nauk technicznych w dziennie: budownictwo, pod kierunkiem profesora Czesława Szymczaka, uzyskał w 2007 roku na Wydziale Inżynierii Lądowej Politechniki Gdańskiej, broniąc pracę doktorską, pt.: Statyka i analiza wrażliwości rusztów zbudowanych z prętów...
-
Experimental and Computational Analysis of the Ship Propeller in Open Water Conditions for Inclined Flow
PublikacjaThe paper presents the results of computational analyses simulating the open water tests of ship propeller in inclined flow. The results of computations are compared with the results of corresponding experimental analyses carried out in the towing tank of Ship Design and Research Centre (CTO S.A.). The object of the research was the model propeller identified as CP469. The aim of the study was to validate the results of numerical...
-
Experimental and numerical analysis of the pyrolysis dynamics of a single wood particle: presentation of the radiographic technique
PublikacjaPyrolysis is an oxygen-free process for the thermal decomposition of raw materials. The heat conduction and flow of pyrolysis products (i.e., the gas fraction and liquid vapour generated during pyrolysis) influence the process and products. In this work, the influence of the orientation of wooden particle fibres with respect to the direction of the heat source on the dynamics of the process was investigated, where there were two...
-
The Mediational Role of Relational Psychological Contract in Belief in a Zero-Sum Game and Work Input Attitude Dependency
Publikacja -
Cloud solutions as a platform for building advanced learning platform, that stimulate the real work environment for project managers
PublikacjaImproving skills of managers and executives require, that during the transfer of knowledge (in different ways: during studies, trainings, workshops and other forms of education) it is necessary to use tools and solutions that are (or will be) used in real world environments, where people being educated are working or will work. Cloud solutions allow educational entities (universities, training companies, trainers, etc.) to provide...
-
Work and formal retirement age - opinions of SWE employees participating in the Best Agers Lighthouses International Project
PublikacjaThe paper presents selected results of studies carried out within the framework of the international project Best Agers Lighthouses – Strategic Age Management for SME in the Baltic Sea Region, related to the assessment of the opportunities to continue working beyond the retirement age in the opinion of workers.
-
Technological vs. Non-Technological Mindsets: Learning From Mistakes, and Organizational Change Adaptability to Remote Work
PublikacjaThe permanent implementation of the change in working methods, e.g., working in the virtual space, is problematic for some employees and, as a result, for management leaders. To explore this issue deeper, this study assumes that mindset type: technological vs. non-technological, may influence the organizational adaptability to change. Moreover, the key interest of this research is how non-technological mindsets...
-
Remote Work Support Needs of Employees with Autism Spectrum Disorder in Poland: Perspectives of Individuals with Autism and Their Coworkers
PublikacjaBackground and Aims: With remote work becoming more common across industries, employees with autism may experience different work support needs from neurotypical peers. However, the specific remote work needs of this group of employees are underexplored in the literature. We aim to propose ways to assess workplace digital adaptation needs for individuals with autism and a framework for communicating these needs to employers. Methods:...
-
Experimental study of pressure rise at the evaporator of capillary pumped loop with acetone and water as working fluids
PublikacjaIn this work studied is the possibility of fluid pumping using capillary forces in the capillary pumped loop. Experimental and theoretical studies have been performed to understand the phenomena associated with heat transfer in porous structure of the evaporator. The capillary effect was studied during operation of two different capillary porous structures with two different working fluids, namely water and acetone. The results...
-
Experimental Investigation of the Performance of an Innovative Implantable Left Ventricular Assist Device—Proof of Concept
PublikacjaThis paper presents the results of experimental performance of an innovative left ventricular assist device working on a specially designed test stand. The introduced invention is mainly applied for supporting the heart in patients with end-stage heart failure accompanied by mitral valve regurgitation and pulmonary hypertension. Moreover, the developed device has the form of a flexible balloon forming an intracardiac inert gas-filled...
-
Experimental and numerical investigations of ultimate strength of degradated structures
PublikacjaThe presented work investigates the corrosion influence on the structural behaviour of structural elements. Nine welded large-scale stiffened plates, and 30 standard small specimens have been subjected to the accelerated marine immersed conditions. After corrosion testing, the specimens have been accurately measured in terms of surface characteristics. The coupon specimens were furtherly subjected to tensile loading to develop...
-
SESSILE DROPLET CONTACT ANGLE OF WATER-Al2O3, WATER-TiO2 AND WATER-Cu NANOFLUIDS
PublikacjaThe goal of the present work was the experimental determination of the contact angle of droplets of three nanofluids on various substrates. Of particular interest was effect of nanoparticle concentration on droplet contact angle.
-
Thermodynamic and geometrical characteristics of mixed convection heat transfer in the shell and coil tube heat exchanger with baffles
PublikacjaThe article presents passive heat transfer enhancement method in the form of baffles to increase the energy efficiency of the shell coil heat exchanger. Conducted literature review shows that, despite numer- ous studies, there is little work on the intensification of heat transfer at the shell side. Most of the work focuses on the impact of geometrical parameters of the coil itself. This article successfully proves that it is possible...
-
Alternative way of the main reinforcement anchorage in reinforced short cantilevers
PublikacjaThe results of the experimental investigation of the reinforced corbels and dapped end beams with steel studs were introduced in the work. The efficiency of this type of the reinforcement was compared with the typical reinforcenet applied in reinforced conctrete construcions.
-
THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THIN-WALLED BEARING SHELL’S DESIGN PARAMETERS AND ASSEMBLY CONDITIONS ON THE HOLDING TORQUE INSIDE A HOUSING BORE OF A CONNECTING ROD
PublikacjaThe aim of the work was the experimental and theoretical evaluation of the influence of the most important parameters determining the holding torque of a thin-walled bearing shell inside a housing bore of a connecting rod. The main investigated parameters were defned by authors experience in this feld. In the frst stage of research, a special test stand was designed in order to allow measuring the real values of the friction torque...
-
“Don’t call it work”: An interpretative phenomenological analysis of volunteer firefighting in young adults based on the volunteer process model
PublikacjaThe number of people engaging in volunteer firefighting is on the decline. It is important to understand what factors on a personal and social level and from the three stages of the volunteer process model: antecedents, experiences and consequences, might be linked to starting and sustaining such engagement. To address this problem, a qualitative, interview-based study was performed on a sample of 10 volunteer firefighters from...
-
Coronary artery disease, arterial stiffness, and myocardial work: what is the role of diabetes in this vicious circle? Authors’ reply
Publikacja -
Data set generation at novel test-rig for validation of numerical models for modeling granular flows
PublikacjaSignificant effort has been exerted on developing fast and reliable numerical models for modeling particulate flow; this is challenging owing to the complexity of such flows. To achieve this, reliable and high-quality experimental data are required for model development and validation. This study presents the design of a novel test-rig that allows the visualization and measurement of particle flow patterns during the collision...
-
Experimental and predicted physicochemical properties of monopropanolamine-based deep eutectic solvents
PublikacjaIn this work, the novel deep eutectic solvents (DESs) based on 3-amino-1-propanol (AP) as hydrogen bond donor (HBD) and tetrabutylammonium bromide (TBAB) or tetrabutylammonium chloride (TBAC) or tetraethylammonium chloride (TEAC) as hydrogen bond acceptors (HBAs) were synthesized with different molar ratios of 1: 4, 1: 6 and 1: 8 salt to AP. Fourier Transform Infrared Spectroscopy measurements were performed to provide an evidence...
-
Experimental and predicted physicochemical properties of monopropanolamine-based deep eutectic solvents
PublikacjaIn this work, the novel deep eutectic solvents (DESs) based on 3-amino-1-propanol (AP) as hydrogen bond donor (HBD) and tetrabutylammonium bromide (TBAB) or tetrabutylammonium chloride (TBAC) or tetraethylammonium chloride (TEAC) as hydrogen bond acceptors (HBAs) were synthesized with different molar ratios of 1:4, 1:6 and 1:8 salt to AP. Fourier Transform Infrared Spectroscopy measurements were performed to provide an evidence...