Filters
total: 9182
filtered: 5490
-
Catalog
Chosen catalog filters
displaying 1000 best results Help
Search results for: DECISION%20PROCESS
-
Jumping Wave Characteristic during Low Plasticity Burnishing Process
PublicationDuring the low plasticity burnishing process of soft materials such as carbon steel with a hardness of up to 40 HRC (Rockwell grade) a raised structure of the material known as the Jumping Wave forms in front of the tool roll. This phenomenon significantly disturbs the burnishing process, but is very poorly described in the literature. This article presents studies of this phenomenon on the example of burnished 1.0562 steel. The...
-
Development of Gas Sensor Array for Methane Reforming Process Monitoring
PublicationThe article presents a new method of monitoring and assessing the course of the dry methane reforming process with the use of a gas sensor array. Nine commercially available TGS chemical gas sensors were used to construct the array (seven metal oxide sensors and two electrochemical ones). Principal Component Regression (PCR) was used as a calibration method. The developed PCR models were used to determine the quantitative parameters...
-
Systemic analysis of a manufacturing process based on a small scale bakery
PublicationThe main aim of the article is to present two new innovative concepts of reliability of a functioning manufacturing system in the process of making bread in small-scale bakeries. Reliability is understood as one of the representations of an operator acting on specifc streams in time to - t. One of these represents the global reliability of a system as a function of parallel action of all the streams of the system in time to to...
-
Approximate models and parameter analysis of the flow process in transmission pipelines
Publicationthe paper deals with the problem of early leak detection in transmission pipelines. First we present the derivation of state-space equations of the flow process in the pipelines. This description is then aggregated in order to obtain a principal model. Next, the problem of process model parameterization is addressed, taking into account the maximization of a model stability margin. The location of the maximum is determined using...
-
Polish waterfront in the process of transformation: The case of Elbląg port city
PublicationThe topic of waterfront transformation is a vast and challenging issue, which in small and medium-sized cities is still unexplored. With growing global interest in the matter of regeneration of city-water relationship and increasing public awareness of the value of waterfront public spaces, actions to transform abandoned waterfront areas have been undertaken in many Polish port cities. City of Elbląg, located in northern Poland,...
-
All-gather Algorithms Resilient to Imbalanced Process Arrival Patterns
PublicationTwo novel algorithms for the all-gather operation resilient to imbalanced process arrival patterns (PATs) are presented. The first one, Background Disseminated Ring (BDR), is based on the regular parallel ring algorithm often supplied in MPI implementations and exploits an auxiliary background thread for early data exchange from faster processes to accelerate the performed all-gather operation. The other algorithm, Background Sorted...
-
Ship’s de-perming process using coils lying on seabed
PublicationA ship built from ferromagnetic steel disturbs the uniformity of the Earth’s magnetic field. Changes of ship’s signature are due to the magneto-mechanical interaction of the hull with the Earth’s magnetic field. The ship’s magnetic field can be detected by a magnetic naval mine. For this reason, the vessel has to be demagnetized. There are several methods of ship’s de-perming. The results of experimental and computer simulations...
-
MULTI-CRITERIA MODEL IN MULTIFUNCTIONAL BUILDING SYSTEM DESIGN PROCESS
PublicationThe paper presents a multi-criteria approach in multifunctional building system design process. The aim is to develop a theory relative to the engineering system of multifunctional with a mathematical representation defined by a holistic network for the lifecycle of the designed object. The idea of work was to define the structure of a complex system. Background for the presented field is to develop a design strategy for multifunctional...
-
Design of standard cells library for UMC L130E FSG process
Publication -
Thermodynamic modeling of combustion process of the internal combustion engines – an overview
PublicationThe mathematical description of combustion process in the internal combustion engines is a very difficult task, due to the variety of phenomena that occurring in the engine from the moment when the fuel-air mixture ignites up to the moment when intake and exhaust valves beginning open. Modeling of the combustion process plays an important role in the engine simulation, which allows to predict incylinder pressure during the combustion,...
-
Inhibition of the granular anammox process by the high concentration of free ammonia.
PublicationHigh concentrations of ammonia and nitrite, typical for reject water treatment in the anammox process with the use of high temperatures and pH, may cause free ammonia (FA) inhibition. In this study, the inhibitory effect of FA on anammox process rate was investigated in a bench-scale sequencing batch reactor (SBR) with granular anammox biomass. Results of the study present that the anammox process could be successfully operated...
-
Hardened Steel Surface Waviness Created by Rolling Burnishing Process
PublicationThe surface of the finishing machined parts is defined mainly by roughness parameters. Growing demands on the part, especially mating sliding or rolling, require the specification of additional parameters, such as waviness parameters, particularly when there is significant resistance to seizing or noise reduction. This paper presents surface waviness characteristics of hardened burnished steel.
-
The Roughness of the Hardened Steel Surface Created by the Rolling-Burnishing Process
PublicationBurnishing hard materials can be used as an alternative finishing process. this paper presents the results of burnishing hardened steel. The article discusses surface deformation that occurs during this process and depends on the selected parameters of the geometric structure of the force applied for surface burnishing.
-
Evaluation of the glycerolysis process and valorisation of recovered polyol in polyurethane synthesis
PublicationIn this study, the glycerolysis of polyurethane (PU) foam and the applicability of obtained glycerolysate (GLY) for cast PUs were investigated. It was found that crude glycerine with purity grade of 84% might be successfully used for the glycerolysis. The optimal conditions were determined as follows: reaction time of 60 min at 220 °C using dibutyltin dilaurate catalyst (0.5%). Moreover, the purification of GLY by means of liquid-liquid...
-
Representing Process Characteristics to Increase Confidence in Assurance Case Arguments
PublicationAn assurance case is a structured, evidence-based argument demonstrating that a safety or other quality objective of a high integrity system is assured. Assurance cases are required or recommended in many industry domains as a means to convince the regulatory bodies to allow commissioning of such system. To be convincing, an argument should address all potential doubts and thus cover numerous additional issues, including the processes...
-
The influence of the drying process on the deformation of the beech and oak wood samples
PublicationThe influence of the drying process conditions on the deformation of the beech and oak wood. The results of the deformation of beech wood (Fagus sylvatica L.) and oak wood (Quercus robur) after drying process are presented. The drying process was carried out in the same drying schedule for each wood species. During each of schedules 40 pieces of wood were dried. The samples were divided into two groups. The first group of tested...
-
Fragmentation of Hydrographic Big Data Into Subsets During Reduction Process
PublicationThe article presented problems of fragmentation of hydrographic big data into smaller subsets during reduction process. Data reduction is a processing of reduce the value of the data set, in order to make them easier and more effective for the goals of the analysis. The main aim of authors is to create new reduction method. The article presented the first stage of this method – fragmentation of bathymetric data into subsets. It...
-
Participatory Budgeting in Poland – Missing Link in Urban Regeneration Process
PublicationIn last thirty years Poland has gone a long way toward democracy and decentralization. Role of public participation in planning is increasing rapidly and recently many new instruments of empowering the community is being introduced, participatory budgeting is one of the most important. On the other hand, urban regeneration is one of the most important challenges of polish cities are facing. Technical and transport infrastructure...
-
Use of AMI Meters in the Process of Low Voltage Grid Optimization
PublicationThis is a report of a project involving, inter alia, low voltage grid performance optimization with data from AMI meters . The study was supported with a European UPGRID grant, and executed by a consortium of companies from seven European countries, including Poland .
-
Building Dedicated Project Management Process Basing on Historical Experience
PublicationProject Management Process used to manage IT project could be a key aspect of project success. Existing knowledge does not provide a method, which enables IT Organizations to choose Project Management methodology and processes, which would be adjusted to their unique needs. As a result, IT Organization use processes which are not tailored to their specific and do not meet their basic needs. This paper is an attempt to fill this...
-
The process generation of WWTP models for optimization of activated sludge systems
PublicationThe objective of water and wastewater utilities, which are responsible for optimization of wastewater treatment plant operation, is threefold: environmental protection, saving money, and mitigation of pollutant emissions, both to water and air. The performed study aimed to assess the process generation of WWTP models that improve activated sludge systems operation, by means of new developed Mantis2 model. This model accounts for...
-
Reduction of Computational Complexity in Simulations of the Flow Process in Transmission Pipelines
PublicationThe paper addresses the problem of computational efficiency of the pipe-flow model used in leak detection and identification systems. Analysis of the model brings attention to its specific structure, where all matrices are sparse. With certain rearrangements, the model can be reduced to a set of equations with tridiagonal matrices. Such equations can be solved using the Thomas algorithm. This method provides almost the same values...
-
Modelling of fracture process in concrete using a novel lattice model.
PublicationArtykuł omawia wyniki modelowania procesu zarysowania w elementach betonowych przy zastosowaniu dyskretnego modelu kratownicowego. Beton był modelowany na poziomie mezoskali z uwzględnieniem 3 faz: kruszywa, zaczynu cementowego i stref kontaktu. Obliczenia wykonano dla rozciągania i ścinania połączonego z rozciąganiem.
-
Modelling of fracture process in brittle materials using a lattice model
PublicationW artykule przedstawiono wyniki obliczeń propagacji rys w elementach betonowych przy zastosowaniu modelu dyskretnego opartego na ruszcie belkowym. Obliczenia wykonano dla różnych problemów brzegowych. Dla redukcji kruchości w obszarze pokrytycznym przyjęto model nielokalny obliczenia odkształceń.
-
A 3D lattice model to describe fracture process in fibrous concrete
PublicationArtykuł omawia wyniki modelowania procesu zarysowania w elementach betonowych zawierające stalowe włókna przy zastosowaniu dyskretnego modelu kratownicowego. Beton był modelowany na poziomie mezoskali z uwzględnieniem 5 faz: kruszywa, zaczynu cementowego, włókien i obu stref kontaktu. Obliczenia trójwymiarowe wykonano dla jednoosiowego rozciągania.
-
Study of fracture process in concrete using a discrete lattice model.
PublicationW artykule omówiono wyniki numeryczne z zastosowaniem dyskretnego modelu rusztowego złożonego z belek do symulacji procesu zarysowania w elementach betonowych. Obliczenia wykonano dla różnych procesów obciążeniowych. Wyniki porównano jakościowo z wynikami doświadczeń.
-
Optimizing Construction Engineering Management Using Metaheuristic Methods and Bayesian Networks
PublicationThe construction of buildings invariably involves time and costs, and disruptions impact ongoing construction projects. Crisis situations in management strategies, structural confusion, and finan-cial miscalculations often arise due to misguided decision-making. This article proposes a method that combines the learning of Bayesian Networks and heuristic techniques to optimize deci-sion-making processes in construction scheduling....
-
Experience Visualizaton
PublicationSet of Experience Knowledge Structure (SOEKS) has proved its capability of storing substantial part of experience at a particular decision point. The management of SOEKS record is also proposed in many papers for example referring to concepts of Decisional DNA knowledge representation, that is a collection of a number of SOEKS. The aim of this paper is to focus on visualization and practical aspects of presenting gathered knowledge...
-
Implementation of Business Intelligence in an IT organization - the concept of an evaluation model
PublicationThis paper presents the issue of assessing the validity and effectiveness of implementing a Business Intelligence system in an IT Support Organization. This entity provides IT services to external clients involving, in particular, the storage and processing of large amounts of data. The vast amount of realized projects and also incidents reported in connection with those projects prevented effective decisions from being made without...
-
Analysis of the Factors Contributing to Bariatric Success After Laparoscopic Redo Bariatric Procedures: Results from Multicenter Polish Revision Obesity Surgery Study (PROSS)
Publication -
Image Classification Based on Video Segments
PublicationIn the dissertation a new method for improving the quality of classifications of images in video streams has been proposed and analyzed. In multiple fields concerning such a classification, the proposed algorithms focus on the analysis of single frames. This class of algorithms has been named OFA (One Frame Analyzed).In the dissertation, small segments of the video are considered and each image is analyzed in the context of its...
-
The structure of knowledge resources supporting a model of IT technologies architecture = Struktury zasobów wiedzy wspierających model architektury technologii IT
PublicationThis paper introduces an abstract model for tools used in the software engineering process. The main goal of the research is to develop a universal model which allows a description of tools used in the process. The model supports a decision making process and gives an option to choose the best tooling for the situation. The model considers many factors including, but not exclusive to, the company structure, project environment...
-
USEFULNESS OF SEMI-MARKOV PROCESSES AS MODELS OF THE OPERATION PROCESSES FOR MARINE MAIN ENGINES AND OTHER MACHINES OF SHIP POWER PLANTS
PublicationThe paper describes the properties of semi-Markov processes and the opportunities and benefits from their use as models of the operation processes for marine combustion engines and other machines of ship power plants. The emphasis is put on the importance of the theory of semi-Markov processes for development of the theory of marine combustion engines and other machines of ship power plants, as well as for development of the operational...
-
The concept of streamlining the logistics processs at the company
PublicationThe aim of the article is to present a concept related to the improvement of the logistics process at the company, by the modernisation of the main railway siding of the terminal. The paper present the reasons for the decision that was once made in order to obtain the expected advantages after the modernisation. The comparison of the incurred expenses and the profits that might be gained in the...
-
Simulation of damage process of containership's side structure due to collision with a rock
PublicationW artykule przedstawiono wyniki uproszczonego modelowania numerycznego procesu kolizji burty kontenerowca ze skałą. Analiza wyników modelowania pozwala wyciągnąć wnioski o charakterze zjawiska jak również określić obszar i głębokość uszkodzenia wywołanego przez penetrującą skałę w celu doboru wymiarów geometrii i wypełniacza dla drugiej bariery ochronnej.
-
EFFECT OF MILK FAT COOLING RATE ON CRYSTALLIZATION PROCESS OF TRIACYLGLYCEROLS THEREIN
Publication -
Divination from chips: monitoring of the sawing process with chip geometry analyzes
PublicationWióry (trociny) są niechcianym produktem towarzyszącym procesowi przecinania. Jednakże, niosą one w sobie wiele informacji świadczących o przebiegu procesu obróbki. Metoda oceny składu procentowego wiórów - ich frakcji - jest prosta lecz ma szereg ważnych ograniczeń. W pracy zaprezentowano nowy alternatywny sposób pomiaru geometrii wiórów. Przedstawiono wyniki dla skrawania drewna mrożonego i nie mrożonego. Wyniki uzyskane ta metodą...
-
Studies on removal of hydrophobic organics from contaminated soil by washing process
PublicationZbadano efektywność wymywania NAPL ze złoża piaskowego za pomocą roztworów dwóch niejonowych surfaktantów: polioksyetylenowanego alkoholu tłuszczowego (Rokanol NL6) oraz alkiloglukozydu (Triton BG10). Jako NAPL zastosowano dwa węglowodory - dodekan i heksadekan. Oba surfaktanty były relatywnie efektywne w usuwaniu dodekanu. Ze wzrostem stężenia surfaktantu obserwowano wzrost efektywności wymywania dodekanu, jednakże Rokanol NL6...
-
Process modeling inside cylinder in an internal combustion engine with heat regeneration
Publication -
Selection of form factors of machine carrying systems in reliance on the process duty
Publication -
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to...
-
Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process
Publication -
Seed-Roasting Process Affects Oxidative Stability of Cold-Pressed Oils
Publication -
Comparison of cadmium adsorption process on barley straw in batch and flow reactors
Publication -
Stimulation of Heavy Metal Adsorption Process by Using a Strong Magnetic Field
Publication -
Size-Dependent in Vitro Biocompatibility and Uptake Process of Polymeric Carbon Nitride
Publication -
Pyrolysis of Waste Biomass: Technical and Process Achievements, and Future Development-A Review
PublicationPyrolysis has been applied in the human economy for many years, and it has become a significant alternative to the production of chemical compounds, including biofuels. The article fo-cuses mostly on recent achievements in the technical and processing aspects of pyrolysis. The aim of the review is to present the latest research on the process of waste biomass pyrolysis to fuel production. The paper describes the mechanisms of...
-
Modeling of Process of Maintenance of Transport Systems Telematics with Regard to Electromagnetic Interferences
Publication -
Neural Networks in the Diagnostics Process of Low-Power Solar Plant Devices
Publication -
Turning process monitoring of internal combustion engine piston’s cylindrical surface
Publication