Filters
total: 757
filtered: 640
-
Catalog
Chosen catalog filters
Search results for: FILTR%20CYFROWY
-
Bandwidth-Controllable Third-Order Band Pass Filter Using Substrate Integrated Full- and Semi-Circular Cavities
PublicationThe article presents a novel circular substrate integrated waveguide (SIW) bandpass filter (BPF) with controllable bandwidth. The proposed BPF is configured using two microstrip feedlines, semi- circular SIW cavities, capacitive slots, and inductive vias. The circular cavity is bisected into two halves, with the two copies thereof being cascaded. Two bisected and cascaded structures obtained this way are subsequently connected...
-
Particle Filter Modification using Kalman Optimal Filtering Method as Applied to Road Detection from Satellite Images
PublicationIn the paper recursive state estimation approach is presented as applied to satellite images. Especially, a model of dynamic systems of the non-linear and non-Gaussian systems is presented, and finally the Kalman filter and particle filter and an integration of both is figured out. Special attention is paid to the application for satellite image analysis.
-
Miniaturized bandpass substrate integrated waveguide filter with frequency-dependent coupling realized using asymmetric GCPW discontinuity
PublicationAn asymmetric GCPW discontinuity is proposed to provide frequency-dependent coupling in microwave bandpass filters. Wider and narrow sections introduce, respectively, the capacitive and inductive component to the equivalent circuit representing coupling. By selecting the dimensions of the discontinuity and width of the inductive window in substrate integrated waveguide, an additional transmission zero can be introduced at prescribed...
-
A nine-input 1.25 mW, 34 ns CMOS analog median filter for image processing in real time
PublicationIn this paper an analog voltage-mode median filter, which operates on a 3 × 3 kernel is presented. The filter is implemented in a 0.35 μm CMOS technology. The proposed solution is based on voltage comparators and a bubble sort configuration. As a result, a fast (34 ns) time response with low power consumption (1.25 mW for 3.3 V) is achieved. The key advantage of the configuration is relatively high accuracy of signal processing,...
-
Inline Waveguide Filter With Compact Frequency-Dependent Coupling Producing Two Additional Poles and Three Transmission Zeros
PublicationThis work reports a compact frequency-dependent coupling (FDC) structure introduced in a rectangular waveguide, which allows to generate two additional in-band transmission poles and three transmission zeros (TZs). This serves to increase the order/selectivity of the waveguide bandpass filter in a compact inline topology, thus without the need for any additional space/volume or cross coupling. The proposed FDC consists of a partial-height...
-
Ultra-Wideband Vivaldi Antenna with an Integrated Noise-Rejecting Parasitic Notch Filter for Online Partial Discharge Detection
PublicationPower transformers and gas-insulated switchgear (GIS) play crucial roles in electrical power grids. However, they may suffer from degradation of insulation material due to wear and tear, leading to their imminent failure. Partial discharges (PDs) are an initial sign of insulation materials degradation which emit signals spanning various physical domains, including electromagnetic. PDs are temporally narrow, high-frequency, stochastic...
-
Highly-Miniaturized Dual-Mode Bandpass Filter Based on Quarter-Mode Substrate Integrated Waveguide with Wide Stopband
PublicationThis paper presents a novel design of a highly-miniaturized dual-mode bandpass filter (BPF) employing a quarter-mode substrate integrated waveguide (QMSIW). The QMSIW resonator is based on a square cavity with metallic vias along two sides, and open-ended edges at the remaining sides that contain orthogonal feed lines. An open slot is introduced along the two sides of the square cavity with metallic vias to form a magnetic wall....
-
Efficient FPGA Implementation of an RFIR Filter Using the APC–OMS Technique with WTM for High-Throughput Signal Processing
PublicationNowadays, Finite Impulse Response (FIR) filters are used to change the attributes of a signal in the time or frequency domain. Among FIR filters, a reconfigurable filter has the advantage of changing the coefficient in real-time, while performing the operation. In this paper, the Anti-Symmetric Product Coding (APC) and Odd Multiple Storage (OMS) modules are utilized to implement the reconfigurable FIR filter (RFIR–APC–OMS). Herein,...
-
Open-Phase Fault Detection Method for Sensorless Five-Phase Induction Motor Drives with an Inverter Output Filter
PublicationThe paper presents the sensorless five-phase induction motor drive implementation with an inverter output filter with third harmonic injection. For the sensorless operation, the required observers are presented for the first and third harmonics with consideration of the inverter output filter. Moreover, the interaction of the observers and the control system is capable to handle a deactivation of one or two phases, which improves...
-
Wpływ uwarunkowań rzeczywistych na pracę równoległego filtru aktywnego sterowanego ze sprzężeniem od prądu zasilającego
PublicationW artykule przedstawiono wpływ uwarunkowań rzeczywistych na pracę równoległego filtru aktywnego i zdolność kompensacji prądów harmonicznych. Zbadano wpływ opóźnień czasowych wynikających z implementacji cyfrowej sterowania, wpływ impedancji zwarciowej sieci zasilającej oraz błędów generowania napięcia przekształtnika na jakość kompensacji filtru. Badania symulacyjne przeprowadzono dla trzech układów sterowania: otwartego, zamkniętego...
-
Sterowanie silnikiem asynchronicznym w układzie zamkniętym z filtrem wyjściowym falownika napięcia
PublicationW artykule przedstawiono zamknięty układ sterowania silnikiem asynchronicznym klatkowym pracujący bez pomiaru prędkości obrotowej przy zasilaniu z falownika napięcia z filtrem wyjściowym. Filtr wyjściowy falownika stanowi układ zawierający elementy bierne L, C , R umieszczone między falownikiem a silnikiem, które wprowadzają do układu spadek napięcia oraz powoduje występowanie przesunięcia fazowego prądów i napięć na wejściu i...
-
Realizacja specjalnych filtrów cyfrowych o strukturze Farrowa
PublicationRozprawa doktorska jest wynikiem pracy nad projektowaniem i implementacją cyfrowych filtrów specjalnych z opóźnieniem ułamkowym za pomocą jednostopniowego przestrajalnego, nierekursywnego filtru o strukturze Farrowa. Założone cele pracy, sformułowane na str. 2, zostały osiągnięte. Wszystkie opisane w pracy filtry zaimplementowano w środowisku obliczeniowym MATLAB i przebadano w celu weryfikacji ich właściwości. Pokazano, że wszystkie...
-
Current harmonic controller in multiple reference frames for series active power filter integrated with 18-pulse diode rectifier
PublicationThe paper presents the control system and selected results of experimental tests of the AC/DC power converter consisting of an 18-pulse diode rectifier based on coupled reactors and a serial active power filter. Proportional integral controllers with decoupling components are implemented in multiple reference frames for selective line current harmonic suppression. The regulator is provided with a backtracking anti-windup mechanism...
-
A diode rectifier with a Special Coupled Reactor and additional Active Power Filter in the Marine Local Power Network Supply Conditions
Publication -
Implementation of Extended Kalman Filter with Optimized Execution Time for Sensorless Control of a PMSM Using ARM Cortex-M3 Microcontroller
PublicationThis paper addresses the implementation and optimization of an Extended Kalman Filter (EKF) for the Permanent Magnet Synchronous Motor (PMSM) sensorless control using an ARM Cortex-M3 microcontroller. A various optimization levels based on arithmetic calculation reduction was implemented in ARM Cortex-M3 microcontroller. The execution time of EKF estimator was reduced from 260.4 μs to 37.7 μs without loss of accuracy. To further...
-
Wpływ filtru wyjściowego falownika napięcia na widmo drgań i hałasu układu napędowego z silnikiem indukcyjnym
PublicationZasosowanie filtrów wyjściowych falownika napiecia nie jest jednoznaczne z ograniczeniem drgań i hałasu emitowanego przez przekształtnikowy układ napedowy. Zamieszczono analizę wpływu filtru wyjściowego na widma hałasu i drgań silnika asynchroniczneho oraz kompletnego układu napędowego wraz z filtrem wyjściowym falownika napięcia. Przedstawiono wyniki analizy widmowej ciśnienia akustycznego emitowanego przez wybrany silnik klatkowy...
-
Multiple output differential OTA with linearizing bulk-driven active-error feedback loop for continuous-time filter applications
PublicationA CMOS circuit realization of a highly linear multiple-output differential operational transconductance amplifier (OTA) has been proposed. The presented approach exploits a differential pair as an input stage with both the gate and the bulk terminals as signal ports. For the proposed OTA, improved linearity is obtained by means of the active-error feedback loop operating at the bulk terminals of the input stage. SPICE simulations...
-
Inline Microstrip Bandpass Filter With Two Transmission Zeros and Increased Order Using Spurious Resonance of Frequency-Dependent Inverter
PublicationA design method for a class of fourth-order inline microstrip bandpass filter with two transmission zeros and 20% fractional bandwidth is presented. The filter consists of two quarter-wavelength transmission-line resonators coupled by a frequency-dependent inverter. The inverter is composed of two open-ended stubs that are connected by an interdigital capacitor and introduces two poles and two transmission zeros in the filter response....
-
Sterowanie predykcyjne i fuzja danych w systemie dynamicznego pozycjonowania statku
PublicationRozprawa doktorska poświęcona jest badaniu zastosowania fuzji danych oraz sterowania predykcyjnego w systemie dynamicznego pozycjonowania statku. W pierwszej części pracy przedstawiono historię rozwoju systemów dynamicznego pozycjonowania, różne metody estymacji położenia statku, metody sterowania oraz cel i tezę pracy. Następnie zaprezentowano model matematyczny statku, kinematykę oraz dynamikę. W kolejnej części przedstawiono...
-
Estymacia stanu nieliniowych obiektów dynamicznych.
PublicationW wielu zagadnieniach z obszaru teorii i praktyki sterowania, w tym identyfikacji lub regulacji, oraz diagnostyki procesów, wykorzystywana jest ocena (estymacja) stanu obiektu dynamicznego. Dla obserwowanego procesu, który można opisać dyskretno-czasowym modelem Gaussa-Markowa, istnieje nieobciążony estymator minimalnowariancyjny stanu, znany jako filtr Kalmana.W pewnych praktycznych sytuacjach model Gaussa-Markowa może być jednak...
-
Ogólna struktura filtrów Gm-LC czasu ciągłego.
PublicationW pracy przedstawiono ogólny model filtrów Gm-LC czasu ciągłego oraz jego opis macierzowy. Wykazano, że dowolny filtr aktywny tej klasy zarówno trybu napięciowego jak i prądowego jest szczególnym przypadkiem opracowanej struktury. Przedstawione rozważania teoretyczne zilustrowano reprezentatywnym przykładem dolnoprzepustowego układu eliptycznego filtru Gm-LC dowolnego(nieparzystego) rzędu.
-
Process control of air stream deodorization from vapors of VOCs using a gas sensor matrix conducted in the biotrickling filter (BTF)
PublicationThis article presents the validity, advisability and purposefulness of using a gas sensor matrix to monitor air deodorization processes carried out in a peat-perlite-polyurethane foam-packed biotrickling filter. The aim of the conducted research was to control the effectiveness of air stream purification from vapors of hydrophobic compounds, i.e., n-hexane and cyclohexane. The effectiveness of hydrophobic n-hexane and cyclohexane...
-
Compensation of supply current harmonics, reactive power, and unbalanced load current balance in the closed-loop control of a shunt active power filter
PublicationThis paper presents the compensation tasks performed by a shunt active power filter, including compensation of harmonic currents, reactive power, and an unbalanced load current. The paper demonstrates novel control of the shunt active power filter in a closed-loop system. The control algorithm was verified by performing simulations and compared the simulated results with those obtained in an open-loop control system. All simulations...
-
Zwiększenie dokładności systemu pozycjonującego przez integrację radiowych pomiarów odległości z systemem inercyjnym
PublicationW referacie zaprezentowano filtr Kalmana, dzięki któremu można zintegrować radiowe pomiary odległości ze współrzędnymi położenia obiektu wyznaczonymi za pomocą systemu inercyjnego. Podejście takie pozwala zmniejszyć wpływ dryftu sensorów systemu inercyjnego, a także zmniejszyć wpływ szumów radiowych pomiarów odległości na estymowane współrzędne położenia obiektów. Wyniki działania opisanego filtru zaprezentowano z użyciem pomiarów...
-
Test limitations induced by fault-driven instability of analog circuits.
PublicationCelem pracy jest ocena ograniczeń testowania uszkodzeń parametrycznych wynikajacych z utraty stabilności przez testowany układ analogowy. Zastosowano metody zapożyczone z teorii sterowania: liniową transformacje frakcyjną i analizę metodą strukturalnych wartości szczególnych. Przykładowej analizie poddano filtr typu leapfrog. Do obliczeń wykorzystano środowisko Matlab/Simulink. Wyniki obliczeń wykazały dużą podatność testowanego...
-
Respiration rate estimation for model predictive control of dissolved oxygen in wastewater treatment plant
PublicationRespiration rate is very important parameter for biological processes in wastewater treatment plant (WWTP). The sequential algorithm for estimate the respiration rate is proposed and investigated. The Kalman filter (KF) is used. Simulation tests for the benchmark WWTP are presented.Respiracja jest bardzo ważnym parametrem dla prawidłowego przebiegu procesów biologicznych w oczyszczalni ścieków. W artykule przedstawiono i zbadano...
-
Implementacja na procesorze sygnałowym przesuwnika wysokości dźwiękuze skalowaniem zespolonej pulsacji chwilowej
PublicationOpracowano przesuwnik wysokości dźwięku wykorzystujący metodę skalowania zespolonej pulsacji chwilowej otrzymywanej za pomocą zespolonego filtru Hilberta. Filtr Hilberta służy do pozyskania dwóchpodstawowych reprezentacji: amplitudy chwilowej oraz pulsacji chwilowej przetwarzanego sygnału, który ma wartości rzeczywiste. Sygnał wynikowy o przesuniętej wysokości dźwięku jest syntetyzowany za pomocą jednoczesnego skalowania powyższych...
-
Adjustable fractional-delay filters utilizing the Farrow structure and multirate techniques. [Przestrajalne filtry o opóźnieniu ułamkowym wykorzystujące strukturę Farrowa i techniki wieloszybkościowe]
PublicationDo efektywnej realizacji ułamkowo opóźniających, przestrajalnych filtrów FIR (o skończonej odpowiedzi impulsowej) można wykorzystywać strukturę Farrowa. Jednakże, niezależnie od efektywności w porównaniu z innymi strukturami, jej złożoność implementacyjna szybko rośnie ze wzrostem szerokości pasma filtru. Celem zredukowania złożoności numerycznej, zaproponowano podejście wieloszybkościowe. W tym podejściu sygnał wejściowy jest...
-
Projektowanie oraz implementacja cyfrowego multiefektu gitarowego z wykorzystaniem procesora sygnałowego
PublicationW artykule został przedstawiony proces projektowania i realizacji cyfrowego multiefektu gitarowego z wykorzystaniem procesora sygnałowegoTMS320C5535 firmy Texas Instruments, dla którego oprogramowanie napisano w języku C. Omówiono zasady działania oraz algorytmy wybranych efektów dźwiękowych, które zostały zaimplementowane w procesorze sygnałowym. Zaprojektowano również uniwersalny moduł wejściowy zawierający wzmacniacz z regulowanym...
-
Wykorzystanie PIX 112 do usuwania jonów arsenu z wody podziemnej w procesie koagulacji powierzchniowej w złożu filtru piaskowo-piroluzytowego
PublicationArtykuł jest podsumowaniem badań przeprowadzonych w skali ułamkowo-technicznej oraz doświadczeń z trzyletniej eksploatacji niewielkiej stacji oczyszczania wody podziemnej. Wykazano, że zastosowanie koagulacji powierzchniowej związkami żelaza (dawkowanie koagulantu, napowietrzanie/mieszanie, filtracja przez złoże kwarcowo-piroluzytowe), pozwala skutecznie usunąć zawarte w ujmowanej wodzie jony arsenu do ilości zgodnej z wymaganiami...
-
Effects of n-butanol presence, inlet loading, empty bed residence time and starvation periods on the performance of a biotrickling filter removing cyclohexane vapors from air
PublicationThis paper presents the results of investigations on the removal of cyclohexane vapors from air using a peat-perlite packed biotrickling filter. Effects of basic process parameters i.e. IL (inlet loading) and EBRT (empty bed residence time) as well as introduction of n-butanol to the treated air stream and starvation periods on the process performance were evaluated. The results show that the introduction of hydrophilic n-butanol...
-
Projektowanie filtrów IIR przy zastosowaniu algorytmu ewolucyjnego
PublicationW pracy zaprezentowano metodę projektowania filtrów cyfrowych IIR (InfiniteImpulse Response) przy wykorzystaniu algorytmu ewolucyjnego w dwóch wariantach. W pierwszym projektowane są filtry w taki sposób, aby ich charakterystyki amplitudowe spełniały postawione założenia. W drugim wariancie przedstawiono możliwość polepszenia charakterystyk fazowych filtrów IIR. Otrzymane rezultaty są porównane z wynikami otrzymanymi podczas projektowania...
-
Soft- and hard-decision multiple-model estimators for air traffic control
PublicationAnalizuje się problem śledzenia samolotów cywilnych manewrowania w zapewnianiu kontroli ruchu lotniczego (ATC) systemów za pomocą wielomodelowej (MM) estymacji stanu. Budując odpowiedni zestaw modeli manewrowania można opisać, jak różne manewry wpływają na proces oceny stanu wykonywany przez filtr Kalmana (KF) w oparciu o model ruchu bezmanerwowego. Metodologia ta prowadzi do podsystemu diagnostycznego, który wspiera estymator...
-
Wpływ filtru wyjściowego falownika na generowanie zaburzeń w przewodzie ochronnym. III Krajowe Sympozjum Kompatybilność Elektromagnetyczna w Elektrotechnice i Elektronice, EMC´03.
PublicationW artykule zamieszczono wyniki badań zaburzeń występujących w przewodzie ochronnym silnika asynchronicznego klatkowego zasilanego z sieci elektroenergetycznej przez przemiennik częstotliwości. Widma zaburzeń powodowane zmianą stanu łączników półprzewodnikowych w przemiennikach częstotliwości określono w zakresie częstotliwości 10kHz - 150kHz, 150kHz - 30MHz. Dla badanego układu zamieszczono przykładowe amplitudy harmonicznych...
-
On designing minimax adjustable wideband fractional delay FIR filters using two-rate approach
PublicationZaprezentowano nowe rozwiązanie problemu projektowania numerycznie oszczędnego, przestrajalnego, szerokopasmowego filtru ułamkowo opóźniającego o skończonej odpowiedzi impulsowej (FIR) w strukturze Farrowa. Innowacja polega na zagregowaniu dwóch podejść. Pierwsze z nich polega na równoczesnej optymalizacji wszystkich podfiltrów struktury Farrowa. Drugie wykorzystuje dwuszybkościową aranżację dwustopniową. Docelowe rozwiązanie jest...
-
Zmiana szybkości próbkowania z użyciem filtrów ułamkowoopóźniających projektowanych oknem offsetowanym z pomocą aproksymacji wielomianowej
PublicationW pracy przedstawiono problem realizacji algorytmu zmiany szybkości próbkowania z użyciem filtrów ułamkowoopóźniających. Zaproponowano tutaj zastąpić filtry optymalne, filtrami projektowanych metodą okien offsetowanych. Uzyskujemy w ten sposób rozwiązanie pozbawione silnych listki występujące w paśmie zaporowym filtru zbiorczego jednak pojawia się problem realizacji offsetowania okna prototypowego, które zapropono-wano realizować...
-
Pomiar zakłóceń elektrycznych i hałasu okrętowego systemu napędowego z przemiennikami częstotliwości.
PublicationW ostatnich latach coraz większa liczba systemów napędowych z silnikami asynchronicznymi klatkowymi zasilanymi z przemienników częstotliwości instalowana jest na statkach morskich. Wadą przemienników częstotliwości są generowane przez nie zakłócenia elektromagnetyczne o szerokim widmie częstotliwościowym, które przyczyniają się do znaczącego przyrostu hałasu emitowanego przez systemy napędowe. Przedstawiono cyfrowy system pomiarowy,...
-
A multirate approach to DDS algorithm versus Taylor-series expansion technique.
PublicationPokazano, że cyfrowy generator syntezy bezpośredniej (DDS) można traktować jako algorytm wieloszybkościowy. Rozważono i porównano dwa sposoby wykorzystania pamięci. W pierwszym z nich zastosowano filtr ułamkowo-opóźniający o strukturze Farrowa. Drugie podejście oparto na rotacji fazy na podstawie rozwinięcia w szereg Taylora. Eksperymenty pokazują, że za pomocą obu tych sposobów, dla sinusoidy zespolonej generowanej w kwadraturowym...
-
Metody cyfrowego przetwarzania obrazów
PublicationW celu efektywnego wykorzystania obrazu jako źródła informacji należy przetworzyć go na postać cyfrową. Obraz cyfrowy stanowi punkt wyjścia dla komputerowego przetwarzania obrazów.Niniejsza książka prezentuje wybrane metody i problemy cyfrowego przetwarzania obrazów. Składa się z ośmiu rozdziałów i załączników, w których omawia się operacje na pikselach obrazu, histogramy, progowanie obrazów, filtry liniowe i nieliniowe, wykrywanie...
-
Projektowanie filtrów ułamkowo-opóźniających metodą okien
PublicationW pracy przedstawiono problematykę projektowania filtrów ułamkowo-opóźniających metodą okien. W projektowaniu filtrów ułamkowo-opóźniających tą metodą można wyróżnić dwa główne podejściaprojektowe: z użyciem okna symetrycznego oraz z użyciem okna offsetowanego. Zastosowanie okien symetrycznych pozwala uzyskać bardzo dobre wyniki. Umożliwia nawet uzyskanie filtrów optymalnychbądź prawie optymalnych w sensie różnych kryteriów optymalizacji....
-
Projektowanie filtrów ułamkowo-opóźniających metodą nierównomiernego próbkowania w dziedzinie częstotliwości
PublicationW pracy przedstawiono nową metodę projektowania filtrów ułamkowo-opóźniających typu FIR. W metodzie tej wymusza się zerową wartość zespolonego błędu aproksymacji charakterystyki częstotliwościowej projektowanego filtru lub zerową wartość pochodnej tego błędu w punktach nierównomiernie rozłożonych na osi częstotliwości. W pracy pokazano, że zaproponowana metoda, przy odpowiednim doborze punktów dokładnej aproksymacji, pozwala na...
-
Removal of ammonia nitrogen from groundwater during nitrification processes using pressure filters = Usuwanie azotu amonowego z wód podziemnych w procesie nitryfikacji na filtrach ciśnieniowych
PublicationW pracy zaprezentowano wyniki badań w skali ułamkowo technicznej nad wpływem podwyższonego i zmiennego ciśnienia (do 0,4 MPa) na przebieg usuwania amoniaku z wód podziemnych, w procesie nitryfikacji, w złożu filtracyjnym. Ustalono, że wszystkie filtry badawcze, zarówno ciśnieniowe jak i grawitacyjny, wymagały adaptacji do zmienionego składu filtrowanej wody. Okres adaptacji filtrów ciśnieniowych był dłuższy, niż dla filtra grawitacyjnego....
-
Porównanie metod filtracji w dziedzinie widma DFT
PublicationW niniejszej pracy zaprezentowano porównanie metod filtracji w dziedzinie częstotliwości,czyli w dziedzinie widma DFT. Opisano i omówiono podstawowe metody filtracji: bez zeropaddingu, z zeropaddingiem oraz metodę Cheh Pana. Pokazane i porównane zostały wyniki eksperymentów dla typowych aplikacji, jakimi są filtr dolnoprzepustowy i filtr różniczkujący.
-
Przebieg wpracowywania kwarcowych złóż filtracyjnych przeznaczonych do usuwania manganu i azotu amonowego z wód podziemnych.The course of ripenining of quartz sand filter beds used for manganese and ammonium nitrogen removal from the groundwaters.
PublicationPrzeprowadzone badania wykazały, ze czas wpracowywania się kwarcowego złoża filtracyjnego w procesie odmanganiania i nitryfikacji trwał od 7 do 8 tygodni (złoże wpracowywało się jednocześnie w obu procesach) Wpracowanie uzyskano filtrując napowietrzoną wodę podziemną o stosunkowo wysokich stężeniach manganu (0,6 - 1,1 mg/l) i azotu amonowego (0,4 - 1,4 mgN/l) i niewielkich stężeniach żelaza (poniżej 0,5 mg/l). Po wpracowaniu...
-
Discrete-time estimation of nonlinear continuous-time stochastic systems
PublicationIn this paper we consider the problem of state estimation of a dynamic system whose evolution is described by a nonlinear continuous-time stochastic model. We also assume that the system is observed by a sensor in discrete-time moments. To perform state estimation using uncertain discrete-time data, the system model needs to be discretized. We compare two methods of discretization. The first method uses the classical forward Euler...
-
Badanie niezawodności działania napędów elektrycznych
PublicationPrzedstawiono wybrane zagadnienia detekcji uszkodzeń trójfazowego silnika indukcyjnego takich jak niewspółosiowość i niewyważenie wirnika oraz uszkodzenia prętów wirnika. Analizowano głównie konfigurację napędu, gdzie silnik zasilany jest z falownika przez filtr sinusoidalny, ograniczając się do pomiarów tych wielkości, które mogą być rejestrowane bez umieszczania czujników prądu i napięcia poza falownikiem. Dodatkowo pokazano...
-
Bezczujnikowy rozruch wysokoobrotowej maszyny synchronicznej z magnesami trwałymi
PublicationCelem artykułu jest przedstawienie bezczujnikowego rozruchu maszyny synchronicznej z magnesami trwałymi. W pierwszej fazierozruchu zastosowano sterowanie w układzie otwartym z regulacją składowych prądu stojana. Zaproponowano sposób przełączenia pomiędzysterowaniami w układzie otwartym i zamkniętym. W układzie zamkniętym do estymacji prędkości wykorzystano rozszerzony filtr Kalmanai bezśladowy filtr Kalmana. Przedstawiono takŜe...
-
Using Alpha-beta filtration for robustness improvement of a quadrocopter positioning system
PublicationQuadrocopter is an unmanned aerial vehicle (UAV) platform. The position of the robot is determined based on readings from an accelerometer and a gyroscope, but the measurement signals contain broadband noise. This article describes a solution for filtering out the noise based on an Alpha – beta filter. It also presents the methodology of designing and implementing such a filter for noise cancellation in measurement signals from...
-
Sensorless Startup of Super High Speed Permanent Magnet Motor
PublicationCelem artykułu jest przedstawienie metody bezczujnikowego rozruchu wysokoobrotowego silnika z magnesami trwałymi. Zastosowano dwa typy metod sterowania. W pierwszej fazie rozruchu zastosowano metodę sterowania prądem, następnie przełączono do trybu sterowania wektorowego. Przy sterowaniu wektorowym zostały użyte: rozszerzony filtr Kalmana (EKF) oraz alternatywny Bezśladowy Filtr Kalmana (UKF) jako obserwatory prędkości obrotowej....
-
Low-Voltage Low-Power Filters with Independent ω0 and Q Tuning for Electronic Cochlea Applications
PublicationAn acoustic second-order low-pass filter is proposed for filter banks emulating the operation of a human cochlea. By using a special filter structure and an innovative quality (Q)-factor tuning technique, an independent change of the cutoff frequency (ω0) and the Q-factor with unchanged gain at low frequencies is achieved in this filter. The techniques applied result in a simple filter design with low Q-factor sensitivity to component...