Filters
total: 3735
-
Catalog
displaying 1000 best results Help
Search results for: NONLINEAR FREQUENCY RESPONSE
-
Performance-driven yield optimization of high-frequency structures by kriging surrogates
PublicationUncertainty quantification is an important aspect of engineering design, as manufacturing toler-ances may affect the characteristics of the structure. Therefore, quantification of these effects is in-dispensable for adequate assessment of the design quality. Toward this end, statistical analysis is performed, for reliability reasons, using full-wave electromagnetic (EM) simulations. Still, the computational expenditures associated...
-
Frequency and time domain characteristics of digital control of electric vehicle in-wheel drives
PublicationIn-wheel electric drives are promising as actuators in active safety systems of electric and hybrid vehicles. This new function requires dedicated control algorithms, making it essential to deliver models that reflect better the wheel-torque control dynamics of electric drives. The timing of digital control events, whose importance is stressed in current research, still lacks an analytical description allowing for modeling its...
-
Photoacoustic response of a common starfish tissue
PublicationW pracy przedstawiono wyniki badań widma fotoakustycznego tkanki rozgwiazdy czerwonej (Asterias Rubens). Otrzymane wyniki się zbliżone do uzyskanych wcześniej dla innych organizmów żywych Trunculariopis Trunculus i Sea Urchin. Rezultaty badań potwierdziły eksperymentalnie, że organizmy stare geologicznie absorbują promieniowanie szczególnie intensywnie w zakresie długości fal, które nie są pochłaniane przez wodę.
-
"Klepsydra" z cyklu No Quick Response
Publication -
Numerical determination of heat exchanger response
PublicationPrzedstawiono metodę przybliżonego obliczania temperatury płynu w ustalonym punkcie wymiennika ciepła i w ustalonej chwili. Wykorzystując nieklasyczny rachunek operatorów można wyznaczyć wzór na odpowiedź wymiennika ciepła, w którym występuje m.in. całka funkcji jednej zmiennej. Do obliczenia wartości całki dla ustalonych parametrów zastosowano wzory Newtona - Cotesa. Podano również oszacowanie błędu przybliżonego obliczania wartości...
-
Electrocatalytic gas sensor response analysis
PublicationW pracy przedstawiono i porównano metody analizy odpowiedzi elektrokatalitycznych czujników gazów toksycznych. Opisane metody pozwalają na ekstrakcje z odpowiediz czujników informacji o rodzaju gazu oraz o jego stężeniu.
-
An ancestral molecular response to nanomaterial particulates
Publication -
Modelling of elastic response of granular media
PublicationW pracy przedstawiono opis gruntowego ośrodka ziarnistego w ujęciu jego nieciągłości.Podano przejście opisu tego ośrodka do opisu ośrodka gruntowego ciągłego. Podano rozwiązania ciągłe stanu naprężenia wg. rozwiązania Mindlina. Podano określenie wartości parametrów sprężystych ośrodka ciągłego przy bardzo małych odkształceniach. Przeanalizowano wpływ różnych czynników na określenie modułu odkształcenia sprężystego. Podano sposób...
-
Numerical investigations of the nonlinear waves generation in a bubble layer
PublicationRozważano zagadnienie propagacji fal różnych częstotliwości wewnątrz warstwy z pęcherzykami. Przedstawiono model matematyczny zjawiska oraz wyniki badań teoretycznych. Badano zmiany widma fali bieżącej i odbitej jak również zmiany amplitud wybranych harmonicznych ciśnienia tych fal w funkcji grubości warstwy i koncentracji pęcherzyków.
-
Theoretical studies of nonlinear generation efficiency in a bubble layer
PublicationCelem pracy jest teoretyczna analiza propagacji fal o dużym natężeniu w warstwie z pęcherzykami. Przedstawiono model matematyczny zjawiska w tym omówiono problem wyznaczania prędkości fazowej, współczynnika tłumienia i częstotliwości rezonansowej pęcherzyków. Badano zmiany amplitud pierwszej i drugiej harmonicznej ciśnienia fali odbitej i bieżącej w funkcji grubości warstwy oraz względnej koncentracji pęcherzyków. Rozważano pęcherzyki...
-
On Nonlinear Dynamic Theory of Thin Plates with Surface Stresses
PublicationWe discuss the modelling of dynamics of thin plates considering surface stresses according to Gurtin–Murdoch surface elasticity. Taking into account the surface mass density we derive the two-dimensional (2D) equations of motion. For the reduction of the three-dimensional (3D) motion equations to the 2D ones we use the trough-the-thickness integration procedure. As a result, the 2D dynamic parameters of the plate depend not only...
-
CdS Nanocrystallines: Synthesis, Structure and Nonlinear Optical Properties
Publication -
Nonlinear control systems modelling: global vs. local
Publication -
Towards homoscedastic nonlinear cointegration for structural health monitoring
Publication -
Nonlinear Cointegration Approach for Condition Monitoring of Wind Turbines
Publication -
Quasilinearization methods for nonlinear parabolic equations with functional dependence
PublicationRozważamy problem Cauchy`ego dla nieliniowych równań parabolicznych z zależnością funkcyjną. Dowodzimy twierdzeń o szybkiej zbieżności ciągów kolejnych przybliżeń określonych w metodzie quasilinearyzacji w dwóch przypadkach: (i) argumentem funkcyjnym jest funkcja niewiadoma, (ii) zależność funkcyjna dotyczy również pochodnej funkcji niewiadomej.
-
Tollmien- Shlichting and sound waves interaction: nonlinear resonances.
PublicationRozpatruje się oddziaływanie różnych typów modów hydrodynamicznych w warstwie lepkiej. Stwierdzono możliwość istnienia oddziaływania rezonansowego.Dokładne równania ewolucyjne kierujące dynamiką warstwy lepkiej zostały wypisane.
-
Nonlinear waves in optical waveguides and soliton theory applications
PublicationRównania teorii solitonów zastosowano do propagacji impulsów światła w falo-wodach dielektrycznych.Wyprowadzono i zbadano rozwiazania równań oddziaływa-nia (z uwzględnieniem tłumienia) trzech fal Maxwella-Blocha.
-
Laminated shells in nonlinear six-parameter shell theory
PublicationW pracy proponowany jest związek konstytutywny dla powłoki warstwowej w ramach 6-paramatrowej nieliniowej teorii powłok z miarami odkształceń jak w ośrodku Cosseratów. Zaletą podejścia jest bezpośrednie zastosowanie inżynierskich stałych materiałowych.
-
Numerical methods for systems of nonlinear differential functional equations
PublicationPraca dotyczy zagadnień początkowo brzegowych dla nieliniowych układów różniczkowo funkcyjnych. Rozważana jest aproksymacja rozwiązań rozważanego problemu różniczkowo funkcyjnego przez rozwiązania odpowiedniego problemu różnicowego. W pracy analizowana jest zbieżność prezentowanych metod. Dowód zbieżności opiera się na technice porównawczej z nieliniowym oszacowaniem typu Perron'a dla danych operatorów.
-
Composite shells in 6-field nonlinear shell theory
PublicationW pracy przedstawiono równanie konstytutywne uwzględniające wielowarstwowość materiału powłoki. Równania wyprowadzono bazując na podejściu Equivalent Single Layer
-
Structural pounding models with Hertz spring and nonlinear damper
PublicationW artykule przedstawiono porównanie możliwości wykorzystania dwóch modeli zderzeń: nieliniowego modelu lepkosprężystego i modelu Hertz'a z dodatkowym tłumieniem. Efektywność każdego z modeli zbadano porównując wyniki analiz numerycznych z wynikami badań eksperymentalnych. Wyniki pracy pokazują, iż zastosowanie nieliniowego modelu lepkosprężystego prowadzi do mniejszych błędów w przebiegach czasowych siły zderzenia oraz do mniejszych...
-
Numerical modeling of the nonlinear wave propagation in a bubble layer
PublicationRozważano zagadnienie propagacji fali wewnątrz warstwy z pęcherzykami. Omówiono model matematyczny, przedstawiono przykładowe wyniki badań teoretycznych. Analizowano zmiany ciśnienia wewnątrz warstwy, falę odbitą i bieżącą w ośrodku otaczającym, badano gęstość widmową mocy. Badania teoretyczne przeprowadzono dla różnych grubości warstwy, koncentracji pęcherzyków i wartości parametrów fali padającej.
-
Nonlinear and fluctuation phenomena as reliability predictors for foil capacitors
PublicationW trakcie procesu produkcyjnego kondensatorów przeciwzakłóceniowych wymagane jest przeprowadzenie testów jakości i trwałości. Do tego celu bardzo przydatna byłaby procedura szybkich testów nieniszczących. Rozwiązaniem problemu może być implementacja w systemie realizującym testy produkcyjne dodatkowych zadań związanych z bezpośrednimi pomiarami nieliniowości i/lub fluktuacji. Wybór wskaźnika trzeciej harmonicznej (THI), parametru...
-
On coertia and inertia in aspects of Natanson’s nonlinear extended thermodynamics
PublicationIn this article, the previously underrepresented contributions of Natanson to the field of thermodynamics have been presented. In order to identify a source of irreversibility at Nature, Natanson introduced the concept of Coertia, which is similar to inertia. Natanson’s Coertia is a fundamental property of space that is responsible for every irreversible phenomena in matter, as well as in the electromagnetic and gravitational fields....
-
Direct measurement of nonlinear properties of bipartite quantum states
PublicationNieliniowe własności stanów kwantowych, takie jak entropia, splątania, określają ilość ważnych fizycznych źródeł i są często używane w informatyce kwantowej. Na ogół są one obliczane z pełnego opisu stanu kwantowego, pomimo tego, że zależą od niewielkiej ilości parametrów opisujących dany stan. Wyciągamy nielokalną i nieliniową wielkość, mianowicie entropię Renyi, z lokalnych pomiarów dwóch par fotonów splątanych polaryzacyjnie.
-
H2AX phosphorylation, its role in DNA damage response and cancer therapy
PublicationDouble-strand breaks (DSBs) are the most deleterious DNA lesions, which, if left unrepaired, may have severe consequences for cell survival, as they lead to chromosome aberrations, genomic instability, or cell death. Various physical, chemical, and biological factors are involved in DSB induction. Cells respond to DNA damage by activating the so-called DNA damage response (DDR), a complex molecular mechanism developed to detect...
-
The use of Response Surface Methodology for reliability estimation of aluminum silo subjected to wind load
PublicationAn axisymmetric aluminum silo model with a single, standardized geometric imperfection of its lateral surface is considered. The silo is wind – loaded only. The paper is focused on the critical, or limit value of wind pressure, both producing a loss of stability of the silo. This value is affected by vertical coordinate (position) of the imperfection and the angular relation between the imperfection and the wind direction. Reliability...
-
A review of design approaches for the implementation of low-frequency noise measurement systems
PublicationElectronic noise has its roots in the fundamental physical interactions between matter and charged particles, carrying information about the phenomena that occur at the microscopic level. Therefore, Low-Frequency Noise Measurements (LFNM) are a well-established technique for the characterization of electron devices and materials and, compared to other techniques, they offer the advantage of being non-destructive and of providing...
-
Experimental investigation of the weight averaging of pulse frequency modulated sensor output signal
Open Research DataThe research aims to practically verify the results of theoretical analysis and simulations of the efficiency of weight averaging of pulse frequency modulated signal. For this purpose, a suitable test stand was built, and the control software in the LabVIEW environment was prepared. Then, a series of experiments were carried out to process and analyze...
-
A new time-frequency detection method of stray current field interferenceon metal structures.
PublicationA new detection method has been presented of stray current field interference on underground metal structures. The method employs short time Fourier transformation (STFT). This method of analysis allows determination of signal spectral power density changes (e.g., structure potential) in the function of time. In the paper results have been presented of total time–frequency analysis of a pipeline potential in a stray current field...
-
A new approach to active noise and vibration control - [Part I: the known frequency case]
PublicationThis paper presents a new approach to rejection of complex-valued sinusoidal disturbances acting at the output of a discrete-time stable linear plant with unknown dynamics. It is assumed that the frequency of the sinusoidal disturbance is known, and that the output signal is contaminated with wideband measurement noise. The disturbance rejection control rule is first derived and analyzed for a nominal plant model, different from...
-
Multiple output second-generation current conveyor utilizing high frequency output stage
PublicationIn this paper a multiple output second-generation current conveyor (MOCCII) is presented. The main advantage of the proposed general circuit architecture over a typical structure, well known in the literature, is the use of a high passband multiple output current mplifier block instead of cascaded current mirrors. It gives similar frequency responses for all the outputs of the current conveyor and also maintains simplicity of the...
-
Frequency Selective Surface Based MIMO Antenna Array for 5G Millimeter-Wave Applications
PublicationAbstract: In this paper a radiating element consisting of a modified circular patch is proposed for MIMO arrays for 5G millimeter-wave applications. The radiating elements in the proposed 2×2 MIMO antenna array are orthogonally configured relative to each other to mitigate mutual coupling that would otherwise degrade the performance of the MIMO system. The MIMO array was fabri-cated on Rogers RT/Duroid high frequency substrate...
-
Reduced-Cost Design Optimization of High-Frequency Structures Using Adaptive Jacobian Updates
PublicationElectromagnetic (EM) analysis is the primary tool utilized in the design of high-frequency structures. In vast majority of cases, simpler models (e.g., equivalent networks or analytical ones) are either not available or lack accuracy: they can only be used to yield initial designs that need to be further tuned. Consequently, EM-driven adjustment of geometry and/or material parameters of microwave and antenna components is a necessary...
-
A Mesh Deformation Technique Based on Solid Mechanics for Parametric Analysis of High-Frequency Devices With 3-D FEM
PublicationIn this paper, a versatile technique for mesh defor- mation is discussed, targeted at the electromagnetic (EM) field simulation of high-frequency devices using the 3-D finite element method (FEM). The approach proposed applies a linear elasticity model to compute the displacements of the internal mesh nodes in 3-D when the structure geometry is changed. The technique is compared with an alternative approach...
-
Modal properties identification of a novel sandwich footbridge – Comparison of measured dynamic response and FEA
PublicationA modern sandwich composite footbridge made of high-tech materials, being an example of practical application of laminated composites in civil engineering, is presented. The in situ non-destructive testing of the footbridge, aiming to identify modal properties and pedestrian comfort, is described. The measured eigenmodes and eigenfrequencies are compared with numerically estimated values. Finite element analyses of the footbridge...
-
Coupling of Blood Pressure and Subarachnoid Space Oscillations at Cardiac Frequency Evoked by Handgrip and Cold Tests: A Bispectral Analysis
PublicationThe aim of the study was to assess blood pressure–subarachnoid space (BP–SAS) width coupling properties using time–frequency bispectral analysis based on wavelet transforms during handgrip and cold tests. The experiments were performed on a group of 16 healthy subjects (F/M; 7/9) of the mean age 27.2 ± 6.8 years and body mass index of 23.8 ± 4.1 kg/m². The sequence of challenges was first handgrip and then cold test. The handgrip...
-
3-phase medium frequency transformer for a 100kW 1.2kV 20kHz Dual Active Bridge converter
PublicationThe article presents a three-phase Medium Frequency Transformer being a part of a 100kW 1.2kV 20kHz Dual Active Bridge DC-DC converter. The transformer design is detailed focusing on winding and core power loss calculation. The high power three-phase MFT prototype is presented. The experimental results include the transformer impedance characteristics, no load test and three-phase DAB full load test waveforms
-
Daytime Acute Non-Visual Alerting Response in Brain Activity Occurs as a Result of Short- and Long-Wavelengths of Light
PublicationVery recent preliminary findings concerning the alerting capacities of light stimulus with long-wavelengths suggest the existence of neural pathways other than melatonin suppression that trigger the nonvisual response. Though the nonvisual effects of light during the daytime have not been investigated thoroughly, they are definitely worth investigating. The purpose of the present study is to enrich existing evidence by describing...
-
Importance of sign conventions on analytical solutions to the wave-induced cyclic response of a poro-elastic seabed
PublicationThis paper discusses the influence of different sign conventions for strains and stresses, i.e. the solid mechanics sign convention and the soil mechanics sign convention, on the form of governing partial differential equations (the static equilibrium equations and the continuity equation) used to describe the wave-induced cyclic response of a poro-elastic seabed due to propagation of a sinusoidal surface water-wave. Some selected...
-
Influence of service ageing on polyester-reinforced polyvinyl chloride-coated fabrics reported through mathematical material models
PublicationIn this paper the coupled service (constructional tension) and environmental (sunlight, rainfalls, temperature variations) ageing influence on the polyester-reinforced polyvinyl chloride (PVC)-coated fabric VALMEX is studied. Two cases of the same fabric have been analyzed: one USED for 20 years on the real construction of the Forest Opera in Sopot (Poland), and one kept as a spare material (NOT USED). The following tests have...
-
Triangulation-based Constrained Surrogate Modeling of Antennas
PublicationDesign of contemporary antenna structures is heavily based on full-wave electromagnetic (EM) simulation tools. They provide accuracy but are CPU-intensive. Reduction of EM-driven design procedure cost can be achieved by using fast replacement models (surrogates). Unfortunately, standard modeling techniques are unable to ensure sufficient predictive power for real-world antenna structures (multiple parameters, wide parameter ranges,...
-
Optimal control at energy performance index of the mobile robots following dynamically created trajectories
PublicationIn practice, the problem of motion control of the wheeled mobile robots is often neglected. Wheeled mobile robots are strongly nonlinear systems and restricted by non-holonomic constraints. Motion control of such systems is not trivial task and usage of non-optimal control signals can lead to deterioration of the overall robot system’s performance. In case of autonomous application of the mobile robots all parts of its control...
-
Computing algebraic transfer entropy and coupling directions via transcripts
PublicationMost random processes studied in nonlinear time series analysis take values on sets endowed with a group structure, e.g., the real and rational numbers, and the integers. This fact allows to associate with each pair of group elements a third element, called their transcript, which is defined as the product of the second element in the pair times the first one. The transfer entropy of two such processes is called algebraic transfer...
-
Quantum metrology: Heisenberg limit with bound entanglement
PublicationQuantum entanglement may provide a huge boost in the precision of parameter estimation. However, quantum metrology seems to be extremely sensitive to noise in the probe state. There is an important still open question: What type of entanglement is useful as a resource in quantum metrology? Here we raise this question in relation to entanglement distillation. We provide a counterintuitive example of a family of bound entangled states...
-
Introducing a Computational Method to Retrofit Damaged Buildings under Seismic Mainshock-Aftershock Sequence
PublicationRetrofitting damaged buildings is a challenge for engineers, since commercial software does not have the ability to consider the local damages and deformed shape of a building resulting from the mainshock record of an earthquake before applying the aftershock record. In this research, a computational method for retrofitting of damaged buildings under seismic mainshock-aftershock sequences is proposed, and proposed computational...
-
Behaviour of Colliding Multi-Storey Buildings under Earthquake Excitation Considering Soil-Structure Interaction
PublicationThis paper investigates the coupled effect of the supporting soil flexibility and pounding between neighbouring, insufficiently separated buildings under earthquake excitation. Two adjacent three-storey structures, modelled as inelastic lumped mass systems with different structural characteristics, have been considered in the study. The models have been excited using the time history of the Kobe earthquake of 1995. A nonlinear...
-
Using Minimum Actuators to Control Shape and Stress of a Double Layer Spherical Model Under Gravity and Lateral Loadings
PublicationSpherical domes are picturesque structures built in developed countries to attract tourists. Due to horizontal and vertical overloading, the structures’ attractive shapes may be disturbed, and some members' stress may exceed the elastic level. In this paper, the shape and stress of a deformed double-layer spherical numerical model due to simultaneous lateral and vertical loadings are controlled, meanwhile, the number of actuators...
-
Incorporating installation effects into the probability analysis of controlled modulus columns
PublicationThis technical report presents the probabilistic analysis which integrates the Monte Carlo simulation (MCS) with random field theory to model the load–displacement behavior of Controlled Modulus Columns (CMCs) in overconsolidated Poznań clay. Presented study focuses on the practical aspects of statistical analysis of geotechnical data, numerical model development, and results evaluation. Variability and spatial distribution of...