Search results for: MEMS IMU INS
-
Nonlocal Models of Plates and Shells with Applications in Micro- and Nanomechanics
PublicationNowadays, the use of small-scale structures in micro/nanomachines has become more and more widespread. The most important applications of such small-sized parts are in micro-electro-mechanical systems (MEMS) as well as nano-electro-mechanical systems (NEMS) as actuators, sensors, energy harvesters. For example, nanosensors are nanoscale devices that measure physical quantities and convert these to signals that can be detected and...
-
Silicon microcantilever with impedance sensor
Open Research DataThe issue of microelectromechanical systems (MEMS) [1] has been enjoying popularity and interest since the 90s of the 20th century. Microcells are one of the simplest devices of this type, but they can be widely used in sensors. There are reports on the possibility of using this type of sensors in the context of such important issues as diagnostics...
-
Autonomous Control of the Underwater Remotely Operated Vehicle in Collision Situation with Stationary Obstacle
PublicationThe article considers the problem of autonomous control of the underwater remotely operated vehicle mini Remotely Operated Vehicle (ROV) in a collision situation with a stationary obstacle. The control of the collision avoidance process is presented as a synthesis of fuzzy proportional-differential controllers for the control of distance and orientation concerning the detected stationary obstacle. The control of the submergence...
-
DMI measurements impact on a position estimation with lack of GNSS signals during Mobile Mapping
PublicationNowadays, Mobile Laser Scanning is common in use in addition to geodesy measurements. The data which are provided by the system characterizes with high precision and flexibility. To precise mapping, the accuracy of the data should be maintained. In Poland, according to the minister’s dispositions, the accuracy of the data should not exceeded 10 cm. With fully operated system it is easy to uphold, but there is a situation when a...
-
STM32: Aplikacje i ćwiczenia w języku C. - M. Galewski. -
PublicationW książce przedstawiono nowoczesne, 32-bitowe mikrokontrolery z rodzeniem ARM Cortex-M3. Oprócz opisu poszczególnych ich podukładów, zawarto w niej przede wszystkim wiele przykładowych ćwiczeń, których zaawansowanie jest stopniowane, dzięki czemu czytelnicy są łagodnie wprowadzani w omawianie zagadnienia. Przykłady zamieszczone w książce są bardzo różnorodne, bazują m.in. na czujnikach przyspieszenia i ciśnienia MEMS, interfejsie...
-
Bezprzewodowy trójpłaszczyznowy kontroler położenia
PublicationW pracy przedstawiono system pomiarowy pozwalający na określenie położenia. Moduł elektroniczny wykorzystuje mikroprocesor ATmega oraz akcelerometr wykonany w technologii MEMS. Komunikację między modułem a komputerem PC zrealizowano łączem bezprzewodowym. Przygotowane zostało dedykowane oprogramowanie. Program mikrokontrolera odczytuje dane z akcelerometru i łączem radiowym wysyła je do komputera. Oprogramowanie komputera PC dokonuje...
-
Methodology for the Correction of the Spatial Orientation Angles of the Unmanned Aerial Vehicle Using Real Time GNSS, a Shoreline Image and an Electronic Navigational Chart
PublicationUndoubtedly, Low-Altitude Unmanned Aerial Vehicles (UAVs) are becoming more common in marine applications. Equipped with a Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) receiver for highly accurate positioning, they perform camera and Light Detection and Ranging (LiDAR) measurements. Unfortunately, these measurements may still be subject to large errors-mainly due to the inaccuracy of measurement of the optical...
-
Piezo 2011, Electroceramics for End-Users VI
PublicationThis work extends a power harvesting with using piezoelectric materials. Experimental presents the development of a piezoelectric MEMS generator which has the ability to scavenge mechanical energy of ambient vibrations from their surroundings and transform it into electrical energy that can be used in energy storage applications. Recent literature shows that piezoelectric transduction has received the most attention for vibration-to-electricity...
-
Three-dimensional representation of geographic data in a Web-based GIS
PublicationPresenting geographic data in a web environment has been a long standing problem. For many years the low performance of web browsers has limited the visualization of spatial data to only two dimensions. More recently, the introduction of open standards for 3D acceleration of web applications sparked the emergence of new methods of presenting three-dimensional data in a web browser without using third-party extensions. However,...
-
Design of a microrobotic wrist for needle laparoscopic surgery
PublicationThe paper addresses the design of a micro wrist for needle laparoscopic surgery (needlescopy) using MEMS technology and an original 3 degree of freedom, 3D architecture. Advancement in needlescopy drives the development of multi-dof micro-tools 1-2mmin diameter with 3D mobility but standard available fabricationtechniques are for 2.5D structures. The paper discusses thedevelopment steps and design solutions for the realization...
-
Protokoły łączności do transmisji strumieni multimedialnych na platformie KASKADA
PublicationPlatforma KASKADA rozumiana jako system przetwarzania strumieni multimedialnych dostarcza szeregu usług wspomagających zapewnienie bezpieczeństwa publicznego oraz ocenę badań medycznych. Wydajność platformy KASKADA w znaczącym stopniu uzależniona jest od efektywności metod komunikacji, w tym wymiany danych multimedialnych, które stanowią podstawę przetwarzania. Celem prowadzonych prac było zaprojektowanie podsystemu komunikacji...
-
Selective monitoring of noise emitted by vehicles involved in road traffic
PublicationAn acoustic intensity probe was developed measures the sound intensity in three orthogonal directions, making possible to calculate the azimuth and elevation angles, describing the sound source position. The acoustic sensor is made in the form of a cube with a side of 10 mm, on the inner surfaces of which the digital MEMS microphones are mounted. The algorithm works in two stages. The first stage is based on the analysis of sound...
-
AeroSense Measurements: Wind Tunnel EPFL
Open Research DataData from wind tunnel tests of Aerosesne measurement system installed on NACA63418 at EPFL wind tunnel.
-
Transportable, Portable and Micro Gas Chromatographs
PublicationSignificant benefits can be obtained by miniaturization of conventional benchtop gas chromatographs. The attractive features arising from miniaturization include low-power requirements, low heat capacity of separation columns, low consumption of mobile phase, enhanced performance, higher portability, and easily coupling to detectors and secondary chromatographic systems. In separation sciences, including gas phase separations,...
-
Localization of sound sources with dual acoustic vector sensor
PublicationThe aim of the work is to estimate the position of sound sources. The proposed method uses a setup of two acoustic vector sensors (AVS). The intersection of azimuth rays from each AVS should indicate the position of a source. In practice, the result of position estimation using this method is an area rather than a point. This is a result of inaccuracy of the individual sensors, but more importantly, of the influence of a source...
-
On the geometrically nonlinear vibration of a piezo-flexomagnetic nanotube
PublicationIn order to describe the behavior of thin elements used in MEMS and NEMS, it is essential to study a nonlinear free vibration of nanotubes under complicated external fields such as magnetic environment. In this regard, the magnetic force applied to the conductive nanotube with piezo-flexomagnetic elastic wall is considered. By the inclusion of Euler-Bernoulli beam and using Hamilton’s principle, the equations governing the system...
-
Małgorzata Pawłowicz dr n. med.
PeopleMałgorzata Pawłowicz MD PhD is a paediatrician and paediatric neurologist (Department of Developmental Neurology; Medical University of Gdańsk, Poland) and a resident in clinical genetics (Genetic Outpatient Clinic, Children's Memorial Health Institute in Warsaw, Poland). She studied medicine and received her Master Degree in Paediatrics and Paediatric Neurology at Medical University of Gdańsk. Dr. Pawłowicz completed her PhD studies...
-
COMPARISON OF SYSTEM ON CHIP TECHNOLOGIES FOR SPACE APPLICATIONS
PublicationThe paper presents a review of technologies available for the implementation of digital and mixed signal systems, particularly the system on a chip (SoC) for space applications. The phenomena encountered in the space environment are briefly presented, together with the known solutions, regarding the design of complex electronic systems. The most important norms regarding single die integrated circuits designed for space are also...
-
Portable exhaled breath analyzer employing fluctuation-enhanced gas sensing method in resistive gas sensors
PublicationThis paper presents a portable exhaled breath analyser, developed to detect selected diseases. The set-up employs resistive gas sensors: commercial MEMS sensors and prototype gas sensors made of WO3 gas sensing layers doped with various metal ingredients. The set-up can modulate the gas sensors by applying UV light to induce physical changes of the gas sensing layers. The sensors are placed in a tiny gas chamber of a volume...
-
Mechanics of Micro- and Nano-Size Materials and Structures
PublicationNanotechnology knowledge is always looking to expand its boundaries to achieve the mostsignificant benefit to human life and meet the growing needs of today. In this case, we can refer tomicro- and nanosensors in micro/nano-electromechanical systems (MEMS/NEMS). These electricaldevices can detect minimal physical stimuli up to one nanometer in size. Today, micro/nano-sensordevices are widely used in the...
-
Concept of an Innovative System for Dimensioning and Predicting Changes in the Coastal Zone Topography Using UAVs and USVs (4DBatMap System)
PublicationThis publication is aimed at developing a concept of an innovative system for dimensioning and predicting changes in the coastal zone topography using Unmanned Aerial Vehicles (UAVs) and Unmanned Surface Vehicles (USVs). The 4DBatMap system will consist of four components: 1. Measurement data acquisition module. Bathymetric and photogrammetric measurements will be carried out with a specific frequency in the coastal zone using...
-
Ryszard Jasiński dr hab. inż.
People -
Zastosowanie sztucznej inteligencji do identyfikacji groźnych wypadków samochodowych
PublicationOgromna liczba ofiar wypadków drogowych i ofiar śmiertelnych z tym związanych jest powodem priorytetowego podejścia organizacji światowych do problemu bezpieczeństwa pojazdów samochodowych. Pomimo dużych nakładów finansowych nadal nie powstał system globalnego zarządzania wypadkami. Celem tej pracy jest inteligentny system pokładowy, który na podstawie sygnałów pomiarowych będzie wnioskować o występujących zagrożeniach. W dalszej...
-
Yade-open DEM: an open-source software using a discrete element methodto simulate granular material
PublicationPurpose - YADE-OPEN DEM is an open source software based on the Discrete Element Method which uses object oriented programming techniques. The paper describes the softwarearchitecture.Design/methodology/approach - The DEM chosen uses position, orientation, velocity and angular velocity as independent variables of simulated particles which are subject to explicit leapfrog time-integration scheme (Lagrangian method). The three-dimensional...
-
Application of the finite element methods in long-term simulation of the multi-physics systems with large transient response differences
PublicationApplication of the Finite Element Method (FEM) and the Multibody Dynamics Method allows analyzing of complex physical systems. Complexity of the system could be related both to the geometry and the physical description of phenomenon. The metod is the excellent tool for analyzing statics or dynamics of the mechanical systems, and permits tracking of Multi Body System (MBS) transient response for the long-term simulations and application...
-
Diagnostyka wibracyjna obiektów mostowych z zastosowaniem czujników rotacji
PublicationW pracy przedstawiono aktualizację parametrów na podstawie częstotliwości i postaci drgań własnych przy użyciu iteracyjnej procedury bazującej na macierzy wrażliwości z wykorzystaniem pomiarów rotacyjnych i translacyjnych stopni swobody. Zagadnienia zawarte w pracy koncertują się na aktualizacji parametrów modelu MES. W rozprawie zaproponowano 12 autorskich indeksów oraz autorskie definicje macierzy wag w 8 wariantach. Dokonano...
-
CAD. Integrated Architectural Design, MSc Arch (2023/24)
e-Learning CoursesDetailed understanding of optimizing the design process using parametric BIM (Building Information Modeling) in the Autodesk Revit Architecture program. Practical design exercises included familiarize students with methods of integrating parametric design and exchanging data with other CAD/BIM programs, modifying parametric objects and generating automatic 2D/3D architectural documentation. The lesson plan introduces students to...
-
Integration Data Model of the Bathymetric Monitoring System for Shallow Waterbodies Using UAV and USV Platforms
PublicationChanges in the seafloor relief are particularly noticeable in shallow waterbodies (at depths up to several metres), where they are of significance for human safety and environmental protection, as well as for which the highest measurement accuracy is required. The aim of this publication is to present the integration data model of the bathymetric monitoring system for shallow waterbodies using Unmanned Aerial Vehicles (UAV) and...
-
Piotr Płotka dr hab. inż.
PeoplePiotr Płotka received the M.Sc. and D.Eng. degrees in electronic engineering from the Gdansk University of Technology, Poland, in 1976 and 1985. In 2008 he received D.Sc. (Dr.Hab.) degree, also in electronic engineering, from the Institute of Electron Technology at Warsaw, Poland. From 1977 he was with Academy of Technology and Agriculture at Bydgoszcz, Poland and from 1981 with the Gdansk University of Technology. In cooperation...
-
Stanisław Szczepański prof. dr hab. inż.
People -
Analysis of a micro electro-mechanical platform for laparoscopic surgery
PublicationNiniejsza praca ma na celu określenie możliwości zastosowania odkształcalnych urządzeń o kinematyce równoległej w mikro robotycznych przegubach dla igło-laparoskopii. Operacje chirurgiczne przeprowadzane z użyciem narzędzi laparoskopowych o zmniejszonej średnicy nazywane są igłoskopią (z ang. needlescopy). Narzędzia te pozwalają na przeprowadzanie precyzyjnych operacji na stosunkowo niewielkim obszarze i z zaletami mało inwazyjnych...
-
Laboratorium Materiałów Optoelektronicznych Innowacyjnych Materiałów i Displejów – Centrum Zaawansowanych Technologii
LaboratoriesStanowisko do optycznych nieinwazyjnych badań właściwości i charakteryzacji materiałów i elementów pozwalające na optymalizację technologii ich wytwarzania i rozszerzenie domeny ich zastosowań z wykorzystaniem:; • optycznej tomografii koherentnej – jest to metoda umożliwiająca nieinwazyjne badania cienkich warstw i elementów,; • spektroradiometrii – jest to metoda umożliwiająca badania właściwości displejów, źródeł światła i elementów...