Search results for: SIMULATION STUDY
-
Model and laboratory simulation of a induction motor for diagnostic purposes
PublicationStatistics say that bearings are this part of induction motors which is most susceptible to damage. The equipment employed for bearing diagnostics usually makes use of vibrations as the criterion for technical condition of the bearings. A faulty bearing results in additional motor vibrations. They are reflected in the harmonic content of stator currents. In certain operating conditions the current signal is the sole source of information...
-
Modelling the set of earthworks machinery with the use of computer simulation
Publication -
Three-dimensional conceptual model for service-oriented simulation
Publicationn this letter, we propose a novel three-dimensional conceptual model for an emerging service-oriented simulation paradigm. The model can be used as a guideline or an analytic means to find the potential and possible future directions of the current simulation frameworks. In particular, the model inspects the crossover between the disciplines of modeling and simulation, service-orientation, and software/systems engineering. Finally,...
-
Experimental Verification of Storm Sewer Transient Flow Simulation
PublicationThe paper focuses mainly on laboratory investigations of transient and transcritical flow in a single pipe of a sewer system. The aim of this paper is to present a comparison between pressure values calculated by an improved McCormack scheme and those measured at the hydraulic laboratory of the Gdansk University of Technology, which were observed inside a pipe in an experiment for water flow with pressurization. The analysis proves...
-
Simulation of Parallel Applications on Large-scale Distributed Systems
PublicationThis chapter has a form of a review article in the field of simulating High-Performance Computing systems. We justify the need for a new versatile simulator considering heterogeneity, energy efficiency and reliability of HPC systems. We sketch the problems that need to be solved by such simulator and rationalize using discrete-event simulation for this purpose. Based on a review of existing discrete-event HPC simulation solutions...
-
Selected aspects of heat recovery simulation in houseboat installations
Publication -
Agents in Simulation of Cyberattacks to Evaluate Security of Critical Infrastructures
PublicationIn the last years critical infrastructures have become highly dependent on the information technologies and exposed to cyberattacks. Because the effects of the attacks can be detrimental, it is crucial to comprehensively asses the security of the infrastructures' information systems. This chapter describes MAlSim - the simulator of malicious software based on software agents, developed for the needs of a testbed for critical infrastructures...
-
Evolutionary Sets of Safe Ship Trajectories: simulation results
PublicationThe Evolutionary Sets of Safe Ship Trajectories is a method solving multi-ship encounter situations. For given positions and motion parameters the method finds a near optimal set of safe trajectories of all ships involved in an encounter. The paper briefly presents foundations of the method and focuses on simulation results for selected test cases based on the Baltic Basin. The computer simulations cover both open waters and restricted...
-
Mathematical Modelling and Computer Simulation of Activated Sludge Systems
PublicationPrzegląd systemów osadu czynnego. Rozwój modeli procesu osadu czynnego. Podstawowe definicje z zakresu modelowania matematycznego i symulacji komputerowej. Proces budowy modelu (model biokinetyczny, hydrodynamiczny, transferu tlenu, temperatury). Modelowanie procesów biochemicznych zachodzących w systemach osadu czynnego. Organizacja badań symulacyjnych. Praktyczne zastosowania modeli osadu czynnego.
-
Agent-based social network as a simulation of a market behaviour
PublicationRecent years and the outbreak of world's economic crisis in 2008 proved the crucial importance of reliable analysis of market dynamics. However, werarely apply models of proper detail level (the global prosperity forecast of 2007 can be seen as a grim proof). The behaviour of individuals and companies is far from being ideal and rational. Many claims that the economic paradigm of rational expectations (coming from J. Muth and R....
-
Developing competences of IT project managers using simulation games
PublicationProject Management is a domain in which methodological approach is developing very rapidly. Project managers are required to present knowledge of the various methods of project management and apply them to the management of specific projects. It means that project managers must constantly develop their competence, mainly based on good practices from different formal methods of project management. The purpose of this article is...
-
River flow simulation based on the HEC-RAS system
PublicationThis work considers the problem of river floods, and presents a computer solution that can be used to predict such a threat. The basic tool, called Hydrologic Engineering Centers for River Analysis System (HEC-RAS), and created by the US Army Corps of Engineering, is well developed; and the models created in the system HEC-RAS are quite realistic. For the purpose of solving practical national flood problems, simplified static and...
-
River Flow Simulation Based on the HEC-RAS System
PublicationThis work considers the problem of river floods, and presents a computer solution that can be used to predict such a threat. The basic tool, called Hydrologic Engineering Centers for River Analysis System (HEC-RAS), and created by the US Army Corps of Engineering, is well developed; and the models created in the system HEC-RAS are quite realistic. For the purpose of solving practical national flood problems, simplified static and...
-
Multi-objective optimization of expensive electromagnetic simulation models
PublicationVast majority of practical engineering design problems require simultaneous handling of several criteria. For the sake of simplicity and through a priori preference articulation one can turn many design tasks into single-objective problems that can be handled using conventional numerical optimization routines. However, in some situations, acquiring comprehensive knowledge about the system at hand, in particular, about possible...
-
Simulation of the profile wear of the tool in double wheel lapping
PublicationW pracy przedstawiono model zużycia narzędzia w docieraniu dwutarczowym. Wyprowadzono równania opisujące kontakt przedmiotu z narzędziem. Przedstawiono wyniki analiz symulacyjnych dla różnych parametrów kinematycznych - dla układu współbieżnego i przeciwbieżnego.
-
Multi-agent large-scale parallel crowd simulation
PublicationThis paper presents design, implementation and performance results of a new modular, parallel, agent-based and large scale crowd simulation environment. A parallel application, implemented with C and MPI, was implemented and run in this parallel environment for simulation and visualization of an evacuation scenario at Gdansk University of Technology, Poland and further in the area of districts of Gdansk. The application uses a...
-
Computer simulation of detonation of shaped charge in sea water
PublicationArtykuł zawiera opis systemu przeciwnimowego Głuptak, koncentrując się na opisie działania ładunku kumulacyjnego do niszczenia min morskich. Opisano sposób formowania wiązki plazmy uderzającej w obudowę miny po zdetonowaniu opisywanego ładunku kształtowego. Zaprezentowano obraz symulacyjny i zdjęcia poklatkowe penetracji plazmy w obiekcie niszczonym.
-
Real-time simulation in non real-time environment
PublicationSimulation in real-time is a very useful tool because of didactical and practical benefits. Very important benefit of real-time simulation is a fact that operator’s decision can be taken into account in the same time scale as the real system would work. This enables construction of simulators, and opportunity to test control algorithms in Hardware in The Loop scheme using target industrial equipment. Professional real-time environments...
-
Simulation model of IMS/NGN call processing performance
PublicationIn current telecommunications it is assumed that demands of the information society for quickly delivered services will be satisfied by the Next Generation Network (NGN) architecture, which includes IP Multimedia Subsystem (IMS) elements. To guarantee Quality of Service (QoS), proper design and dimensioning of NGN is absolutely necessary, for which appropriate models have to be proposed. As the NGN architecture is very complicated,...
-
Analysis of Agricultural and Engineering Systems using Simulation Decomposition
PublicationThis paper focuses on the analysis of agricultural and engineering processes using simulation decomposition (SD). SD is a technique that utilizes Monte Carlo simulations and distribution decomposition to visually evaluate the source and the outcome of different portions of data. Here, SD is applied to three distinct processes: a model problem, a nondestructive evaluation testing system, and an agricultural food-water energy system....
-
INFOGEST static in vitro simulation of gastrointestinal food digestion
PublicationDeveloping a mechanistic understanding of the impact of food structure and composition on human health has increasingly involved simulating digestion in the upper gastrointestinal tract. These simulations have used a wide range of different conditions that often have very little physiological relevance, and this impedes the meaningful comparison of results. The standardized protocol presented here is based on an international consensus...
-
Parametric Study on a Performance of a Small Counter-Rotating Wind Turbine
PublicationA small Counter-Rotating Wind Turbine (CRWT) has been proposed and its performancehas been investigated numerically. Results of a parametric study have been presented in this paper.As parameters, the axial distance between rotors and a tip speed ratio of each rotor have been selected.Performance parameters have been compared with reference to a Single Rotor Wind Turbine (SRWT).Simulations were carried out with Computational Fluids...
-
Scrutiny of power grids by penetrating PV energy in wind farms: a case study of the wind corridor of Jhampir, Pakistan
PublicationThis study examines the problems caused by intermittent renewable energy sources, especially wind farms, and suggests a different solar energy penetration strategy to improve their loading capacity. The study uses real-time data from a wind farm in Jhampir, Pakistan, to analyse and assess various aspects of grid stations connected to wind farms. Electrical Transient Analyzer Program is used to validate the results by linking these...
-
Scrutiny of power grids by penetrating PV energy in wind farms: a case study of the wind corridor of Jhampir, Pakistan
PublicationThis study examines the problems caused by intermittent renewable energy sources, especially wind farms, and suggests a different solar energy penetration strategy to improve their loading capacity. The study uses real-time data from a wind farm in Jhampir, Pakistan, to analyse and assess various aspects of grid stations connected to wind farms. Electrical Transient Analyzer Program is used to validate the results by linking...
-
The advanced monitoring as a key factor for appropriate optimization and control of full-scale activated sludge systems – case study Debogorze WWTP.
PublicationComputer simulation has become a helpful tool in wastewater treatment systems performance and effectiveness analysis. Advanced monitoring, by using appropriate software, enables to create a mathematical model of a real wastewater treatment plant (WWTP), run a simulation and subsequently interpret results under various conditions. An operation of WWTP is usually controlled by global parameters such as flow, solids retention time,...
-
Survival time prognosis under a Markov model of cancer development
PublicationIn this study we look at a breast cancer data set of women from Pomerania region collected in year 1987-1992 in the Medical University of Gdańsk. We analyze the clinical risk factors in conjunction with Markov model of cancer development. We evaluate Artificial Neural Network (ANN) survival time prediction via a simulation study.
-
Minichannel and minigap classification criteria based on the aspect ratio of the minigeometry: A numerical study
PublicationA detailed numerical investigation has been carried out to analyze the diabatic flow distribution and velocity profile in 18 minigeometries with various aspect ratios for V-type and I-type flow configurations (for 36 cases) assuming ethanol as a working fluid. The aim of the study is to distinguish the value of the aspect ratio for which the flow in minigeometry starts to be two-dimensional (minigap). Cases with a constant Reynolds...
-
Simulation of perovskite-based CuI/CH3NH3PbI3/TiO2 solar cell performance
Open Research DataThe presented data set is part of the theoretical research on novel thin-layer lead-halide perovskite solar cells with different inorganic transparent conductive oxides used as charge transport layers. In this study CuI/CH3NH3PbI3/TiO2 model structure (Model 1) was investigated by the use of the SCAPS-1D simulation method (https://scaps.elis.ugent.be/).
-
Simulation of perovskite-based CuI/CH3NH3PbI3/SnO2 solar cell performance
Open Research DataThe presented data set is part of the theoretical research on novel thin-layer lead-halide perovskite solar cells with different inorganic transparent conductive oxides used as charge transport layers. In this study CuI/CH3NH3PbI3/SnO2 model structure (Model 2) was investigated by the use of the SCAPS-1D simulation method (https://scaps.elis.ugent.be/).
-
Simulation of perovskite-based CuI/CH3NH3PbI3/ZnO solar cell performance
Open Research DataThe presented data set is part of the theoretical research on novel thin-layer lead-halide perovskite solar cells with different inorganic transparent conductive oxides used as charge transport layers. In this study CuI/CH3NH3PbI3/ZnO model structure (Model 3) was investigated by the use of the SCAPS-1D simulation method (https://scaps.elis.ugent.be/).
-
Biomechanics of Lumbar Spine Injury in Road Barrier Collision–Finite Element Study
PublicationLiterature and field data from CIREN database have shown that lumbar spine injuries occur during car crashes. There are multiple hypotheses regarding how they occur; however, there is no biomechanical explanation for these injuries during collisions with road safety barriers (RSBs). Therefore, the objective of this study was to investigate the mechanics of vertebral fractures during car collisions with concrete RSBs. The finite...
-
Comparative Analysis of Numerical and Experimental Studies of the Airflow Around the Sample of Urban Development
PublicationIn this paper, on the background of a short overview of the recent advances in the field of Environmental Wind Engineering (EWE), a comparison of wind tunnel experiment and numerical simulation for some cases of airflow around an urban layout have been reported. The purpose of the study is quantitative and qualitative comparison of measurements in the wind tunnel as well as numerical simulation using Ansys Fluent software. The...
-
Geo-engineering computer simulation seems attractive but is it the real world?
PublicationCorrect formulation of the differential equation system for equilibriom conditions of subsoil, especially in terms of controlled numerical calculation, is discussed. The problem of solution stability is also considered. The solution of problems, which are ill-posed, have no practical value in the majority of cases and is this way the engineering prognosis can lead to real disaster. The object of this paper is quite relevant if...
-
Respiratory system modelling and simulation based on the forced oscillation technique
Publication.
-
Molecular-dynamics simulation of clustering processes in sea-ice floes
Publication -
The Simulation Laboratory Platform Based on Multisim for Electronic Engineering Education
Publication -
Design and simulation of excitation laser system for in-situ Raman monitoring
PublicationPraca opisuje projekt oraz kontrukcję laserowego pobudzania próbek cienkowarstwowych. Zaprezentowana modelowanie optyczne systemu pobudzania oraz konfigurację prototypu. Układ znajdzie zastosowanie w długoogniskowym spektroskopie ramanowskim pracującym na stanowisku PA CVD.
-
Seafloor backscattering: numerical simulation vs. filter theory approach.
PublicationPrzedstawiono model opisujący rozpraszanie sygnału akustycznego na nierównomiernej, regularnie sfalowanej powierzchni dna morskiego jako filtr liniowy z odpowiedzią impulsową o zmieniającej się w czasie chwilowej dominującej częstotliwości. Porównano przewidywania modelu z wynikami otrzymanymi w wyniku złożonych obliczeniowo symulacji numerycznych opartych na fizycznym modelu zjawiska wykorzystującym aproksymację Kirchhoffa. Wstępnie...
-
Simulation of solid state ionic conductors I-V characteristics
PublicationW pracy przedstawiono sumulacje charakterystyk prądowo-napięciowych czujników elktrokatalitycznych. Zastosowano metode różnić skończonych.
-
The numerical simulation of two-dimensional vertical incompressible viscous flow
PublicationW artykule przedstawiono numeryczne symulacje płaskiego pionowego przepływu nieściśliwej cieczy lepkiej ze swobodną powierzchnią. Zastosowano model bazujący na rozwiązaniu równań Naviera-Stokesa metodą "ciśnień" (SIMPLE). Przy takim podejściu otrzymano dywergencję równań Naviera-Stokesa oraz równanie Poissona na ciśnienie. W rozwiązaniu zastosowano schemat Laxa-Wendroffa z przesuniętą siatką Eulera. Takie podejście zapewnia dokładność...
-
Numerical Simulation of Operating Parameters of the Ground Source Heat Pump
Publication -
An application of simulation investigations in design procedures of shippower system automation
PublicationPrzedstawiono wyniki prac dotyczące zastosowania badań symulacyjnych systemów energetycznych statków w środowisku programowym systemu ekspertowego. Wyniki badań symulacyjnych są źródłem głębokiej wiedzy dla systemu ekspertowego dotyczącej oceny spełnienia kryteriów towarzystw klasyfikacyjnych statków. Wybrane sesje symulacyjne podsystemu napędu głównego statku zostały przedstawione i omówione.
-
Simulation of ammonia combustion in dual-fuel compression-ignition engine
Publication -
Simulation of induction hardening of flat surfaces of moving massive elements
Publication -
Monte Carlo simulation of energy migration in uniaxially oriented polymerfilms.
PublicationOpisano zastosowanie metody Monte Carlo do symulowania (komputerowego) procesów fotofizycznych zachodzących w rozciąganych osiowo foliach polimerowych zawierających molekuły barwnika. Przedstawiono zaniki czasowe anizotropii emisji oraz jej zależność od koncentracji barwnika. Zbadano wpływ migracji energii na przebiegi anizotropii emisji badanego układu.
-
Monitoring of concrete curing in extradosed bridge supported by numerical simulation
PublicationThe paper describes a mathematical model of concrete curing taking into account kinetics of setting reactions. The numerical model is implemented in the author’s program that was used to monitor thermal effects recorded in the concrete bottom plate of the extradosed bridge. Numerical approach was verified by experimental measurements and used for assessment of the current compressive strength due to degree of hydration of fresh...
-
Numerical simulation of cold flow and combustion in a swirl stabilized combustor
PublicationA numerical simulation model was developed to investigate the cold flow and combustion using Ansys FLUENT 2021R1. The governing equations were solved using the pressure-based method, and pressure–velocity coupling was performed using the SIMPLE method. To model the turbulent process, the RSM model was used. Non-premixed model is chosen to solve the chemical kinetics between fuel and oxigen. Radiation heat transfer was calculated...
-
Simulation of surveilance of industrial robot's vibration with a use of the modal control
PublicationW pracy rozważano drgania niestacjonarnego układu nośnego robota IRb-6. Do nadzorowania drgań zastosowano algorytm sterowania modalnego przy energetycznym wskaźniku jakości. Celem proponowanego algorytmu jest minimalizacja poziomu drgań uchwytu manipulatora, a tym samym - zwiększenie możliwości nowoczesnych linii zrobotyzowanych, jak również poprawa dokładności i powtarzalności pozycjonowania robotów.
-
Probabilistic sensitivity of limit states of structures. The Monte Carlo simulation
PublicationPraca zawiera koncepcję badania wrażliwości stanów granicznych konstrukcji na zmiany poszczególnych zmiennych podstawowych, w oparciu o procedurę symulacyjną Monte Carlo. Sformułowanie ogólne metody oparte jest na analizie stanów granicznych konstrukcji, wprowadzona metoda losowa umożliwia badania histogramu stanu granicznego oraz estymację niezawodności / prawdopodobieństwa awarii konstrukcji.
-
Probabilistic sensitivity of limit states of structures : The Monte Carlo simulation
PublicationThe main issue of the paper is the probabilistic sensitivity of the limit states of structures with respect to selected input design variables. Attempt to the problem is done by the dedicated Monte Carlo simulation procedure. Basic design variables are random variables of given probability distributions, presented in the form of random numbers. Uni-parametrical increment of the dominant basic variable (basic variables) is done,...