displaying 1000 best results Help
Search results for: 6dof ship motions
-
Measurement Campaign and Mathematical Model Construction for the Ship Zodiak Magnetic Signature Reproduction
PublicationThe paper presents the partial work done within the framework of the EDA Siramis II project focused on magnetic signature reproduction of ships. Reproduction is understood here as the ability to determine the magnetic anomaly of the local Earth magnetic field in any direction and at any measurement depth due to the presence of the analysed object. The B-91 type hydrographic ship Zodiak was selected as the real case study. The work...
-
The Possibilities of Improving the Fatigue Durabilityof the Ship Propeller Shaft by Burnishing Process
PublicationHeavily loaded structural elements operating in a corrosive environment are usuallyquickly destroyed. An example of such an element is a ship propeller operating in a seawaterenvironment. This research presents a fatigue resistance test performed on elements operating inseawater. Different processing parameters applied on the samples in particular were compared withthe specimens whose surface had been burnished differently and...
-
Influence of Added Water Mass on Ship Structure Vibration Parameters in Virtual and Real Conditions
PublicationModelling of ship structures in a virtual environment is now standard practice. Unfortunately, many engineers forget to consideri the influence of added water on the frequency values and the amplitude of natural vibrations. The article presents the effect of water damping on the frequency values of the individual natural vibration modes. The tests were carried out in two stages. First, the mentioned values were determined using...
-
Simulation of ship turning circle test for ballast and full load conditions
Open Research DataThe data show the results of the turning circle spiral test for the simplified ship model, taking into account two states of loading: ballast and full load. During the circulation test, the manoeuvrability of the vessel is tested.
-
Measurements of the coefficients of current distribution between two generators operating in parallel in a ship power station
Open Research DataThe presented dataset is part of research focusing on the assessment of metrological properties of the instrument, Estimator/Analyzer (E/A v.2), developed and made at the Faculty of Electrical Engineering, Department of Marine Electrical Power Engineering of Gdynia Maritime University. The attached dataset contains processed data, expressing the coefficients...
-
Preference-based evolutionary multi-objective optimization in ship weather routing
PublicationIn evolutionary multi-objective optimization (EMO) the aim is to find a set of Pareto-optimal solutions. Such approach may be applied to multiple real-life problems, including weather routing (WR) of ships. The route should be optimal in terms of passage time, fuel consumption and safety of crew and cargo while taking into account dynamically changing weather conditions. Additionally it must not violate any navigational constraints...
-
Uwarunkowania rozwoju polskich firm shipchandlerskich. Analiza krytycznych czynników wzrostu w odniesieniu do Neptun Ship Service Ltd.
PublicationW ekspertyzie dokonano analizy krytycznych czynników wzrostu dla firmy Neptun Ship Service Ltd.
-
Evolutionary Sets of Safe Ship Trajectories: improving the method by adjusting evolutionary techniques and parameters
PublicationThe paper presents some of the evolutionary techniques used by the evolutionary sets of safe ship trajectories method. In general, this method utilizes a customized evolutionary algorithm to solve a constrained optimization problem. This problem is defined as finding a set of cooperating trajectories (here the set is an evolutionary individual) of all the ships involved in the encounter situation. The resulting trajectories are...
-
The Development of a Combined Method to Quickly Assess Ship Speed and Fuel Consumption at Different Powertrain Load and Sea Conditions
PublicationDecision support systems (DSS) recently have been increasingly in use during ships operation. They require realistic input data regarding different aspects of navigation. To address the optimal weather routing of a ship, which is one of the most promising field of DSS application, it is necessary to accurately predict an actually attainable speed of a ship and corresponding fuel consumption at given loading conditions and predicted...
-
Towards a Method Evaluating Control Actions in STPA-Based Model of Ship-Ship Collision Avoidance Process
Publication -
Toward a Method Evaluating Control Actions in STPA-Based Model of Ship-Ship Collision Avoidance Process
Publication -
Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experiments
PublicationResults of ship resistance predictions obtained from towing tank experiments are affected by the method used to extrapolate from a model scale to a ship scale. Selection of method to determine a form factor is subjective and the extrapolation method is accurate for typical hull forms. For innovative hull forms the proper method for calculating the form factor is questionable. Moreover, the influence of the extrapolation method...
-
Assesment of operation of ship main diesel engine using the theory of semi-markovian and markov processes.
PublicationTo precisely determine the task it is necessary to specify also its duration time, apart from conditions in which it will be realized. When considering propulsion engine, i.e. the main element of ship propulsion system, especially important becomes not only the problem which amount of energy could be at one's disposal but also within which time interval it could be delivered. Therefore apart from applying the commonly used reliability...
-
Data fusion of GPS sensors using Particle Kalman Filter for ship dynamic positioning system
PublicationDepending on standards and class, dynamically positioned ships make use of different numbers of redundant sensors to determine current ship position. The paper presents a multi-sensor data fusion algorithm for the dynamic positioning system which allows it to record the proper signal from a number of sensors (GPS receivers). In the research, the Particle Kalman Filter with data fusion was used to estimate the position of the vessel....
-
The influence of selected strain-based failure criteria on ship structure damage resulting from a collision with an offshore wind turbine monopile
PublicationOffshore wind farms are developing well all over the world, providing green energy from renewable sources. The evaluation of possible consequences of a collision involves Finite Element computer simulations. The goal of this paper was to analyse the influence of selected strain-based failure criteria on ship damage resulting from a collision with an offshore wind turbine monopile. The case of a collision between an offshore supply...
-
Comparison of selected parametric methods for prediction of inland waterways ship hull resistance in towing tank test
PublicationIn the paper selected approximate methods for calculation of inland waterways ship resistance and their verification by towing tests, compared on the example of a small urban ferry, are presented. The test results are made for both the bare hull and the hull with appendages (skeg, azimuthal propeller). Significant differences between results of the theoretical methods and experimental ones, especially in the case of the model with...
-
Problems of ship system design for safety.
PublicationSystem bezpieczny to taki, który nie stwarza ryzyka większego niż przyjęte w odpowiednich kryteriach. Kryteria te mogą być wyrażone jakościowo oraz ilościowo. Bezpieczeństwo jako atrybut systemu może być przedmiotem projektowania. Rozróżniono tutaj dwa przypadki: A - dotyczące systemu dla którego właściwe są kryteria jakościowe i B - dotyczące systemu dla którego zastosowano kryteria ilościowe. W uwagach końcowych przedyskutowano...
-
Hydroacustic activity of the ship propeller operation
PublicationPraca przedstawia działanie śrub okretowych jako źródła sygnałów hydroakustycznych, związanych przede wszystkim z różnymi formami kawitacji występującymi podczas pracy śrub.
-
Fuzzy control of a ship propulsion system
PublicationReferat przedstawia analizę i syntezę układu sterowania napędu statku przy zastosowaniu teorii sterowania rozmytego. Układ napędowy jest układem bezpośrednim, wyposażonym w silnik spalinowy wolnoobrotowy oraz śrubę okrętową ze zmiennym skokiem. Przedstawiono także wyniki badań symulacyjnych a następnie porównano wyniki badań symulacyjnych przy zainstalowaniu regulatora rozmytego z analogicznymi wynikami, gdy zastosowano regulator...
-
Human Reliability at Ship Safety Consideration
Publication -
Nonlinear Backstepping Ship Course Controller
PublicationStatek, jako obiekt sterowania charakteryzuje się nieliniową manewrową funkcją opisującą. Metoda backstepping jest jedną z metod, które mogą być wykorzystane w procesie projektowania nieliniowych układu sterowania kursem statków. Metoda została zastosowana w celu zaprojektowania dwóch konfiguracji nieliniowych regulatorów kursu.Regulatory zostały przebadane w układach regulacji kursu statku. Jedna z konfiguracji w fazie projektowania...
-
Analiza możliwości zastosowania środowiska SCILAB do wspomagania projektowania podsystemów energetycznych statków = Analysis of capability of using SCILAB for adding design of power ship subsystems
PublicationW artykule przedstawiono koncepcję wykorzystania środowiska symulacyjnego Scilab, modeli matematycznych oraz badań symulacyjnych przy projektowaniu podsystemów energetycznych statku. Zredagowano przykładową strukturę zawierającą model wysokoprężnego silnika oraz model śruby okrętowej. Przedstawione procedury oraz modele matematyczne zostaną włączone do systemu ekspertowego wspomagającego projektowanie statków. This paper deals...
-
Simplified approach to assess the dynamic response of a container ship subjected to bow slamming load
PublicationSimplified approach to assess the dynamic response of a container ship subjected to the bow slamming load, resulting in a transient vibratory response, typically called a 'whip-ping', is presented. The accurate numerical modelling is very complex and involves cou-pling of the hydrodynamic and structural solution at every time step, leading to huge com-putational and workload cost. Thus, the one-way coupling methodology is adopted,...
-
Evolutionary sets of safe ship trajectories with speed reduction manoeuvres within traffic separation schemes
PublicationIn the previous paper the author presented the evolutionary ship trajectory planning method designed to support Traffic Separation Schemes (TSS). This time the extensions of this method are described which allow to combine evolutionary trajectory planning with speed reduction manoeuvres. On TSS regions with higher than usual density of traffic and smaller distances between ships, the course alterations alone are not always sufficient...
-
Experimental Comparison of Straight Lines and Polynomial Interpolation Modeling Methods in Ship Evolutionary Trajectory Planning Problem
PublicationPaper presents the application of evolutionary algorithms and polynomial interpolation in ship evolutionary trajectory planning method and its comparison to classic approach, where trajectory is modeled by straight lines. Evolutionary algorithms are group of methods that allows\ to find a collision free trajectory in real time, while polynomial interpolation allows to model smooth trajectory, which keeps continuity of velocity...
-
Measurements of the coefficients of active power distribution between two generators operating in parallel in a ship power station
Open Research DataThe presented dataset is part of research focusing on the assessment of metrological properties of the instrument, Estimator/Analyzer (E/A v.2), developed and made at the Faculty of Electrical Engineering, Department of Marine Electrical Power Engineering of Gdynia Maritime University. The attached dataset contains processed data, expressing coefficients...
-
The semi-Markov model of the process of appearance of sea-going ship propupsion system ability and inability states in application to determining the reliablity of these systems
PublicationThe article presents possible application of the theory of semi-Markov processes in creating the eight-state model of the process of appearance of the propulsion systems ability and inability states on sea-going vessels performing transportation tasks in a relatively long operating time t (t → ∞). The model has been proved to be able to be successfully used for determining the reliability of the abovementioned systems. The probability...
-
Karol Niklas dr hab. inż.
PeopleKarol NIKLAS is a university professor at Gdansk University of Technology (Faculty of Mechanical Engineering and Ship Technology, Institute of Naval Architecture). He defended his master's thesis on Naval Architecture, specialty Design of vessels and yachts in 2007. In 2008, he completed postgraduate studies in the specialty 'Novel Simulation Methods in Engineering' at the Faculty of Applied Physics and Mathematics. In 2014 awarded...
-
Four Degree-of-Freedom Hydrodynamic Maneuvering Model of a Small Azipod-Actuated Ship With Application to Onboard Decision Support Systems
PublicationThe main contribution of this paper is a numerical ship motion model of NTNU’s research vessel Gunnerus, capturing the surge, sway, roll, and yaw dynamics when sailing in uniform and steady currents. The model utilizes a crossflow drag formulation for the transverse viscous loads, and it includes a nonlinear formulation for the propulsion and steering loads provided by two azipod thrusters. A wide range of experimental data obtained...
-
A CONCEPT OF DETERMINING THE RELATION BETWEEN LOAD AND WEAR OF TRIBOLOGICAL SYSTEMS OF SHIP MAIN SELF-IGNITION ENGINES BY USING PROBABILISTIC APPROACH PROBABILISTIC APPROACH
PublicationThis paper presents a proposal of simultaneous consideration of load and wear associated with it , of tribological systems of ship main engines (intended for ship propulsion) . Based on results of investigations it was assumed that both the load Q (i.e. a cause of wear ) and the wear Z (i.e. an effect of load occurrence) considered in a given time t(0 ≤ t ≤ t) are random variables Qt and Zt, respectively. There was characterized...
-
Chuan Bo Li Xue/Journal of Ship Mechanics
Journals -
A framework for risk analysis of maritime transportation systems: A case study for oil spill from tankers in a ship–ship collision
Publication -
Fatigue strength determination of ship structural joints. Part I - Analytical methods for determining fatigue strength of ship tructures
PublicationSpectacular accidents at sea which have happened for a few last years show that hull structures of contemporary sea-going ships are not perfect and must be systematically improved. Fatigue strength is one of the groups of strength problems which affect design of contemporary ship's structures and greatly contribute in their improvement process. In this paper several approaches to estimation of fatigue life of hull structural...
-
The voltage on bus bars of the main switchboard of the ro-ro ship electrical power system during a layover at the port
Open Research DataThe dataset is part of the research results on the quality of supply voltage on bus bars of the main switchboard of the ship's electrical power system in different states of ship exploitation. The attached dataset contains the measurement results carried out onboard a ro-ro ship during a layover at the port.
-
A Framework of A Ship Domain-Based Near-Miss Detection Method Using Mamdani Neuro-Fuzzy Classification
PublicationSafety analysis of navigation over a given area may cover application of various risk measures for ship collisions. One of them is percentage of the so called near- miss situations (potential collision situations). In this article a method of automatic detection of such situations based on the data from Automatic Identification System (AIS), is proposed. The method utilizes input parameters such as: collision risk measure based...
-
Experimental study on the selected aspects of bow thruster generated flow field at ship zero-speed conditions
PublicationThe paper presents the results of experimental study on the interaction between the bow thrusters understood as the flow field changes generated by bow tunnel thruster in deep water conditions operated as a single and twin units. The research was limited to zero-speed case for the ship dead in the water. The influence of the hull form and jet spread between the neighbouring thrusters for several combinations of the applied bow...
-
A CONCEPT DESIGN OF DIESEL – HYDRAULIC PROPULSION SYSTEM FOR PASSENGER SHIP INTENDED FOR INLAND SHALLOW WATER NAVIGATION
PublicationThis paper presents an analysis of environmental and technical conditions necessary for working out a possibly most favourable propulsion system for a two – segment passenger ship intended for navigation between Berlin and Kaliningrad. There are presented various types of propulsion systems for small ships as well as analyzed their possible applications and consequences. In this work there were taken into account system’s reliability,...
-
Full scale CFD seakeeping simulations for case study ship redesigned from V-shaped bulbous bow to X-bow hull form
PublicationIncreasing propulsion efficiency, safety, comfort and operability are of the great importance, especially for small ships operating on windy sites like the North Sea and the Baltic Sea. Seakeeping performance of ships and offshore structures can be analysed by different methods and the one that is becoming increasingly important is CFD RANS. The recent development of simulation techniques together with rising HPC accessibility...
-
Limiting distribution of the three-state semi-Markov model of technical state transitions of ship power plant machines and its applicability in operational decision-making.
PublicationThe article presents the three-state semi-Markov model of the process {W(t): t 0} of state transitions of a ship power plant machine, with the following interpretation of these states: s1 – state of full serviceability, s2 – state of partial serviceability, and s3 – state of unserviceability. These states are precisely defined for the ship main engine (ME). A hypothesis is proposed which explains the possibility of application...
-
The voltage on bus bars of the main switchboard of the ro-ro ship electrical power system during maneuvering
Open Research DataThe dataset is part of the research results on the quality of supply voltage on bus bars of the main switchboard of the ship's electrical power system in different states of ship exploitation. The attached dataset contains the measurement results carried out onboard a ro-ro ship during maneuvering.
-
Multi-source-supplied parallel hybrid propulsion of the inland passenger ship STA.H. Research work on energy efficiency of a hybrid propulsion system operating in the electric motor drive mode
PublicationIn the Faculty of Ocean Engineering and Ship Technology, Gdansk University of Technology, design has recently been developed of a small inland ship with hybrid propulsion and supply system. The ship will be propelled by a specially designed so called parallel hybrid propulsion system. The work was aimed at carrying out the energy efficiency analysis of a hybrid propulsion system operating in the electric motor drive mode and at...
-
Jakub Montewka prof. dr hab. inż.
PeopleJakub Montewka is an associate professor at Gdańsk University of Technology in Poland and visiting processor at Aalto University in Espoo, Finland and Wuhan University of Technology in China. Jakub is researching in the field of maritime traffic risk and safety. His primary interests lie in the risk assessment of maritime transportation, quantification of safety of maritime navigation, route optimization for ships in ice-covered...
-
Optimization of quadrilateral mesh for ship hull modelling
PublicationArtykuł przedstawia metodę poprawy jakości czworokątnej siatki elementów skończonych, które najlepiej nadają się do modelowania kadłuba statku dla potrzeb analizy MES. W metodzie zakłada się poprawną topologię siatki i stosuje gradient funkcji celu do poszukiwania optymalnego rozwiązania. Funkcja celu może być dowolną funkcją, opisująca jakość elementu (metryka), odpowiednią dla wymagań metody elementów skończonych. W artykule...
-
Hybrid system of safe ship steering at sea
PublicationPrzedstawiony hybrydowy system sterowania statkiem w sytuacji kolizyjnej na morzu, ma umożliwić nawigatorowi podjęcie decyzji pozwalającej na bezpieczne przejście przez dany akwen z uwzględnieniem warunków pogodowych, i spotkanych ograniczeń nawigacyjnych o charakterze statycznym i dynamicznym. System ten łączy pracę dwóch technik komputerowych, algorytmów ewolucyjnych do wyznaczania optymalnej ścieżki przejścia i sterowania rozmytego...
-
Strenght analysis of the floating dock-ship system.
PublicationOmówiono krytycznie wymagania przepisów towarzystw klasyfikacyjnych dotyczące wytrzymałości doków pływających. Przedstawiono wyniki analizy MES sił wewnętrznych i naprężeń w kadłubie doku o długości podporowej 255m, obciążonego ciężarem masowca o długości między pionami 252m i masie 20900 ton. Pokazano wpływ na wartość sił redukcji w kilblokach i naprężenia takich czynników jak: rozłożenie balastu wyrównwczego w zbiornikach doku,...
-
Environmental safety of a seagoing ship power plant.
PublicationPrzedstawiono probabilistyczne podejście do oceny bezpieczeństwa środowiskowego siłowni statku. Zaproponowano kryterium oceny bezpieczeństwa środowiskowego siłowni statku.
-
A model of ship propulsion systems operating process.
PublicationArtykuł zawiera opis formalny procesu eksploatacji układów napędowych statków. Model tego procesu został przedstawiony w formie dwuwymiarowego procesu,, którego współrzędnymi są procesy semi-Markowa o skończonych zbiorach stanów. Jeden z tych procesów jest procesem zmian stanów technicznych układów napędowych a drugi „ procesem zmian ich stanów eksploatacyjnych. Zaproponowano także jednowymiarowy model procesu eksploatacji układów...
-
Optimal control of multivariable ship propulsion system.
PublicationCelem pracy jest analiza i synteza algorytmu oraz struktury optymalnego regulatora wielowymiarowego układu napędowego statku na podstawie teorii sterowania optymalnego. W tym celu sformułowano oryginalny nieliniowy zero-wymiarowy ciągły w czasie i oparty na chwilowej wartości zmiennej stanu (w odróżnieniu od wartości średnich modelu matematycznego całego układu napędowego statku). Ten model zweryfikowano na podstawie wyników doświadczalnych...
-
Diesel electric a new trend on the ship propulsion
PublicationW artykule przedstawiono rozwój napędu "diesel elektrycznego" oraz argumentację zastosowania tego napędu na różnych typach statków. Referat zawiera również rozwiązania układu transmisji mocy oraz sprawność, jaka cechuje napęd elektryczny. W artykule zawarto również zalety tego napędu, oraz zwrócono uwagę na nowe koncepcje i rozwiązania korzystne dla wytwarzania i transmisji mocy w napędzie elektrycznym.This article presents development...
-
Stability of free floating ship. Part II
PublicationJest to część II artykułu, którego I część ukazała się w PMR 2/2005. Ramiona prostujące są niejednoznaczne dla statku swobodnego, bowiem zależą od sposobu działania momentu przechylającego. Omówiono dwa przypadki, gdy moment przechylający jest równoległy do płaszczyzny symetrii statku oraz gdy wykonuje najmniejszą pracę, czyli gdy jest równoległy do głównej osi bezwładności wodnicy pływania. Pokazano, że przemieszczenia kątowe...