Filtry
wszystkich: 416
-
Katalog
Wyniki wyszukiwania dla: VIRTUAL ENGINEERING PROCESS (VEP)
-
The lognormal model of the multipath fading channel
Dane BadawczeThe dataset contains the results of simulations that are part of the research on modelling the multipath fading in the communication channel. The lognormal fading envelope is generated using the Monte-Carlo simulation (MCS) in the LabVIEW programming environment.
-
Exergy analysis of the Szewalski cycle with a waste heat recovery system
PublikacjaThe conversion of a waste heat energy to electricity is now becoming one of the key points to improve the energy efficiency in a process engineering. However, large losses of a low-temperature thermal energy are also present in power engineering. One of such sources of waste heat in power plants are exhaust gases at the outlet of boilers. Through usage of a waste heat regeneration system it is possible to attain a heat rate of approximately...
-
A Semiautomatic Experience-Based Tool for Solving Product Innovation Problem
PublikacjaIn this paper we present the idea of Smart Innovation Engineering (SIE) System and its implementation methodology. The SIE system is semi-automatic system that helps in carrying the process of product innovation. It collects the experiential knowledge from the formal decisional events. This experiential knowledge is collected from the group of similar products having some common functions and features. The SIE system behaves like...
-
Tomasz Krolikowski dr hab. inż.
OsobyIn 1996, I have graduated from the Faculty of Marine Science of Szczecin University and obtained a master's degree - ocean engineering engineer " - Control and Ocean Engineering Measurements". In 1994 I was hired as an assistant trainee at the Institute of Computer Science Technical University of Szczecin, and after graduating in 1996, I was employed as academic and teaching at the Institute of Computer Science in the Department...
-
Designing Intelligent Factory: Conceptual Framework and Empirical Validation
PublikacjaThis paper presents a framework for monitoring, analysing and decision making for a smart manufacturing environment. We maintain that this approach could play a vital role in developing an architecture and implementation of Industry 4.0. The proposed model has features like experience based knowledge representation and semantic analysis of engineering objects and manufacturing process. It is also capable of continuous real time...
-
PG-00060238 Standardy integralności mechanicznej dla inżynierii cyfrowej opartej na danych
Kursy OnlineKurs w zrozumiały sposób wyjaśnia praktyki inżynierskie dotyczące oceny mechanizmów awarii elementów mechanicznych, metody Stress-Life i Strain-Life, techniki liczenia cykli. Wyjaśnione modele oparte na wiedzy analitycznej są odniesione do potrzeb monitorowania silnika, które generuje dane pracy urządzeń u klientów. Dane te są wykorzystywane w rozwiązaniach inżynierii cyfrowej, takich jak digital twin (dla części) lub digital thread...
-
Marta Dorota Kowalkińska mgr inż.
Osoby -
Processing of point cloud data retrieved from terrestrial laser scanning for structural modeling by Finite Element Method
PublikacjaFinite Element Method is one most popular contemporary method of strength analysis. The method is an advanced method for solving differential equations, based on discretization, which means that area is divided into finite elements. Each finite element has a solution of the equation approximated by specific functions and performing the actual calculations only for nodes of this division. Finite Element Method is widely used in...
-
Step on It Bringing Fullwave Finite-Element Microwave Filter Design up to Speed
PublikacjaThere are many steps in the design of a microwave filter: mathematically describing the filter characteristics, representing the circuit as a network of lumped elements or as a coupling matrix, implementing the distributed elements, finding the initial dimensions of the physical structure, and carrying out numerical tuning using electromagnetic (EM) simulators. The whole process is painstaking and time-consuming, and it requires...
-
Performance of organic coatings upon cyclic mechanical load
PublikacjaA number of engineering structures fail due to the fatigue damage resulting from cyclic mechanical stress. However, as far as organic coatings are concerned this degradation factor remains underestimated. In the paper the authors propose a methodology combining global electrochemical impedance spectroscopy and local atomic force microscopy measurements for evaluation of coating resistance to an impact of repetitive mechanical stress. Typical...
-
The Way One Defines Specification Matters: On the Performance Criteria for Efficient Antenna Optimization in Aggregated Bi-Objective Setups
PublikacjaDesign of antenna structures for real-world applications is a challenging task that often involves addressing multiple design requirements at a time. Popular solution approaches to this class of problems include utilization of composite objectives. Although configuration of such functions has a significant effect on the cost and performance of the optimization, their specific structure is normally determined based on engineering...
-
Building Information Modeling in Small and Middle Sized Buildings – Case Study
PublikacjaBuilding Information Modeling (BIM) is a technology designed to improve and integrate all engineering aspects in the construction design process. Tools that incorporate the idea of BIM are becoming more advanced and also more popular. Available software solutions have already reached an assumable high level of development, but still are not as widespread and used on nearly as many construction projects as could be expected. Therefore...
-
Neural Network-Based Sequential Global Sensitivity Analysis Algorithm
PublikacjaPerforming global sensitivity analysis (GSA) can be challenging due to the combined effect of the high computational cost, but it is also essential for engineering decision making. To reduce this cost, surrogate modeling such as neural networks (NNs) are used to replace the expensive simulation model in the GSA process, which introduces the additional challenge of finding the minimum number of training data samples required to...
-
Experience-Based Product Inspection Planning for Industry 4.0
PublikacjaIn this paper we describe how our Smart Virtual Product Development (SVPD) system can be used to enhance product inspection planning. The SVPD system is comprised of three main modules, these being the design knowledge management (DKM) module, the manufacturing capability and process planning (MCAPP) module, and the product inspection planning (PIP) module. Experiential knowledge relating to formal decisional events is collected,...
-
PG-00060238 Standardy integralności mechanicznej dla inżynierii cyfrowej opartej na danych
Kursy OnlineKurs w zrozumiały sposób wyjaśnia praktyki inżynierskie dotyczące oceny mechanizmów awarii elementów mechanicznych, metody Stress-Life i Strain-Life, techniki liczenia cykli. Wyjaśnione modele oparte na wiedzy analitycznej są odniesione do potrzeb monitorowania silnika, które generuje dane pracy urządzeń u klientów. Dane te są wykorzystywane w rozwiązaniach inżynierii cyfrowej, takich jak digital twin (dla części) lub digital thread...
-
Internal imaging of concrete fracture based on elastic waves and ultrasound computed tomography
PublikacjaThe condition assessment of concrete structures belongs to the greatest challenges of non-destructive testing. Monitoring the fracture process of concrete and detecting cracks at the earliest possible stage is a vital aspect to ensure the safety of civil engineering objects. The use of ultrasound tomography enables imaging the internal structure of a tested element. This study aims at the visualization of fracture damage in concrete...
-
Composite GFRP U-shaped footbridge
PublikacjaThe paper presents proposals for the use of glass fiber reinforced polymer composites for the construction of engineering objects, known and commonly used in the shipbuilding industry. An example of a pedestrian footbridge was used in this case, which, despite the considerable thickness of the structural material, was made using infusion technology in one production cycle. The designed and produced footbridge span is durable, dynamically...
-
Integrated Functional Safety and Cybersecurity Evaluation in a Framework for Business Continuity Management
PublikacjaThis article outlines an integrated functional safety and cybersecurity evaluation approach within a framework for business continuity management (BCM) in energy companies, including those using Industry 4.0 business and technical solutions. In such companies, information and communication technology (ICT), and industrial automation and control system (IACS) play important roles. Using advanced technologies in modern manufacturing...
-
Acceptance Testing of Software Products for Cloud-Based On-Line Delivery
PublikacjaSoftware products intended for on-line delivery by distributors serving an open community of subscribers are developed in a specific life-cycle model, in which roles of the major stakeholders are strongly separated, unlike in any other software development model known in software engineering. Its specificity underlines the fact that a distributor of the final product, responsible for its acceptance for publication and delivery...
-
Experiencing historic waterways and water landscapes of the Vistula River Delta
PublikacjaThe paper gives insights into the characteristics of Vistula River Delta water landscapes, referring to the process of creating land out of water by Polish, Dutch and German settlers. Based on this, the paper presents an integrated strategy formed upon studies in cultural geography and aesthetics, and focused on enhancing the unique characteristics of the region and its rediscovery by tourism. The long process of constructing Vistula...
-
Strategies for Dealing With Software Product Management Challenges
PublikacjaSoftware product management, which involves multiple processes and responsibilities and links to many activities within the organisation, increases the success rate of IT projects. However, the adoption of product management activities and the implementation of the software product manager role itself varies between companies. This research explores the topic of software product managers’ strategies for dealing with challenges...
-
Towards a Universal Model of Engineering Change Management
PublikacjaThe paper deals with the issue of engineering change management (ECM). ECM has received much less attention in the literature than general change management. Moreover, due to their specifics (complexity and multifaceted nature), hitherto developed ECM models are difficult to implement in companies. The paper aims to develop a simplified, universal, and hence easily applicable model of ECM. We based our assumptions on a case study...
-
Kriging-assisted hybrid reliability design and optimization of offshore wind turbine support structure based on a portfolio allocation strategy
PublikacjaIn recent years, offshore wind power generation technology has developed rapidly around the world, making important contributions to the further development of renewable energy. When designing an Offshore Wind Turbine (OWT) system, the uncertainties in parameters and different types of constraints need to be considered to find the optimal design of these systems. Therefore, the Reliability-Based Design Optimization (RBDO) method...
-
Efficient knowledge-based optimization of expensive computational models using adaptive response correction
PublikacjaComputer simulation has become an indispensable tool in engineering design as they allow an accurate evaluation of the system performance. This is critical in order to carry out the design process in a reliable manner without costly prototyping and physical measurements. However, high-fidelity computer simulations are computationally expensive. This turns to be a fundamental bottleneck when it comes to design automation using numerical...
-
Jan Sierzputowski mgr inż.
OsobyJan Sierzputowski is a student at the Doctoral School of the Gdańsk University of Technology. His main interests are designing sailing yachts, improving the design process and human-centred design. In his professional work, he deals with sails, masts, rigging, deck equipment and its optimization for the end user. He graduated from engineering and master's studies at the Gdańsk University of Technology at the Faculty of Shipbuilding...
-
An adaptive-noise Augmented Kalman Filter approach for input-state estimation in structural dynamics
PublikacjaThe establishment of a Digital Twin of an operating engineered system can increase the potency of Structural Health Monitoring (SHM) tools, which are then bestowed with enhanced predictive capabilities. This is particularly relevant for wind energy infrastructures, where the definition of remaining useful life is a main driver for assessing the efficacy of these systems. In order to ensure a proper representation of the physical...
-
Romanika Okraszewska dr inż. arch.
Osobydr inż. arch. Romanika Okraszewska jest adiunktem w Katedrze Inżynierii Drogowej i Transportowej Wydziału Inżynierii Lądowej i Środowiska Politechniki Gdańskiej. W 1996 ukończyła klasę matematyczno-informatyczną w VIII Liceum Ogólnokształcącym im. Komisji Edukacji Narodowej w Gdańsku. Absolwentka dwóch wydziałów Politechiki Gdańksiej, w roku 2002 ukończyła studia architektury i urbanistyki a w 2004 zarządzania i ekonomii. W latach...
-
Jerzy Proficz dr hab. inż.
OsobyJerzy Proficz – dyrektor Centrum Informatycznego Trójmiejskiej Akademickiej Sieci Komputerowej (CI TASK) na Politechnice Gdańskiej. Uzyskał stopień naukowy doktora habilitowanego (2022) w dyscyplinie: Informatyka techniczna i telekomunikacja. Autor i współautor ponad 50 artykułów w czasopismach i na konferencjach naukowych związanych głównie z równoległym przetwarzaniem danych na komputerach dużej mocy (HPC, chmura obliczeniowa). Udział...
-
PRELIMINARY FIELD TESTS AND LONG-TERM MONITORING AS A METHOD OF DESIGN RISK MITIGATION: A CASE STUDY OF GDAŃSK DEEPWATER CONTAINER TERMINAL
PublikacjaAppropriate risk assessment plays a fundamental role in the design. . The authors propose a possible method of design risk mitigation, which follows recommendations included in Eurocode 7. The so-called “Observational Method” (OM) can produce savings in costs and programmes on engineering projects without compromising safety. The case study presented is a complex design solution that deals with the heavy foundations of a gantry...
-
Footbridges. Dynamic Design – Selected Problems
PublikacjaModern footbridges create challenge in esthetic and structural design. Breaking the proven canons is a recipe for architectural success. However esthetic form has to be also a functional pedestrian bridge. Therefore a good FEM modeling is a key element in engineering part of design. The paper presents selected problems related to the modeling of the dynamic construction of footbridges. Several basic dynamic problems concerning...
-
Difference in Perceived Speech Signal Quality Assessment Among Monolingual and Bilingual Teenage Students
PublikacjaThe user perceived quality is a mixture of factors, including the background of an individual. The process of auditory perception is discussed in a wide variety of fields, ranging from engineering to medicine. Many studies examine the difference between musicians and non-musicians. Since musical training develops musical hearing and other various auditory capabilities, similar enhancements should be observable in case of bilingual...
-
Inżynieria odwrotna bazy paliw płynnych w Gdańsku
PublikacjaArtykuł prezentuje prace z zakresu pozyskania danych o zbiornikach bazy paliw płynnych w Gdańsku. Przedstawione rozwiązanie nie ogranicza się tylko do stworzenia (rejestracji) chmury punktów, ale jest próbą wskazania użycia naziemnego skaningu laserowego do stworzenia bazy informacji o bazie paliw – w tym głównie geometrii zbiorników. Autorzy prezentują proces inwentaryzacji, rejestrację chmury punktów oraz wskazują zasady tworzenia...
-
Investigations of hydraulic jump configured by a two phase air water jetimpinging on a flat plate.
PublikacjaPrzedstawiono wyniki badań eksperymentalnych uskoku hydraulicznego powstającego przy napływie strugi uderzającej na powierzchnię płaskiej płyty.
-
Pre-treatment of bio fraction waste prior to fermentation processes
PublikacjaCurrent efforts are taken to increase resource efficiency, close material loops, and improve sustainable waste and by-products management. Thus, networking agro-food by-products and converting them into valuable products completely exhausting the potential of the raw material becomes significant. Model lignocellulosic and starch based biomass were subjected to pre-treatment with the application of acidic compounds, i.e. sulphuric...
-
Experimental and numerical analysis of streamwise vortex generator for subsonic flow
PublikacjaW pracy przedstawiono porównanie wyników obliczeń numerycznych dwoma kodami (FLUENT i SPARC) na tle badań eksperymentalnych generatora wirów wzdłużnych. Przedstawiono wyniki dla liczb Macha przepływu głównego 0.3 i 0.8. Porównano ciśnienie całkowite w dwóch przekrojach za otworem przez który realizowany jest wydmuch. Przedstawiono strukturę wiru wzdłużnego uzyskaną dla obu programów. Średnica otworu jetu jest równa 1mm, co odpowiada...
-
Porównanie szybkości wnikania tlenu w reaktorze airlift z odwrotną warstwą fluidalną i pokrewnych kolumnowych reaktorach barbotażowych
PublikacjaBadano wpływ parametrów procesowych na szybkość wnikania tlenu w reaktorze airlift z cyrkulacją zewnętrzną i odwrotną warstwą fluidalną w strefie opadania. Stwierdzono, że sygnał wnikania tlenu w strefie opadania w początkowym okresie napowietrzania jest równy zero w określonym okresie czasu ściśle związanym z hydrodynamiką układu. Omówiono zależności między współczynnikami wnikania tlenu dla w/w reaktora airlift oraz zawiesinowego...
-
Improving carbon dioxide capture in aqueous ammonia solutions by fine SiO2 particles
PublikacjaAmmonia solutions are considered to be effective solvents for carbon dioxide absorption. Despite the numerous advantages of these solvents, their high volatility is a significant technical and economic problem. Therefore, in this work, silica particles were used as additives to improve CO2 absorption and inhibit NH3 desorption. SiO2 microparticles and colloidal SiO2 particles in the concentration range of 0-0.15 wt.% were used...
-
Removal of cyclohexane vapors from air in biotrickling filters: Effects of gas mixture composition and circular economy approach
PublikacjaThis work presents results of investigations on biotrickling filtration of air polluted with cyclohexane co-treated in binary, ternary and quaternary volatile organic compounds (VOCs) mixtures, including vapors of hexane, toluene and ethanol. The removal of cyclohexane from a gas mixture depends on the physicochemical properties of the co-treated VOCs and the lower the hydrophobicity of the VOC, the higher the removal efficiency...
-
Peroxymonosulfate-assisted photocatalytic degradation of artificial sweeteners in water
PublikacjaIn the present study, peroxymonosulfate (PMS) activation was proposed for efficient photocatalytic degradation of aspartame, acesulfame, saccharin, and cyclamate - artificial sweeteners frequently present in wastewaters and surface waters worldwide. The TiO2 nanosheets with exposed {0 0 1} facets were synthesised using the fluorine-free lyophilisation technique as a green concept for the synthesis and used for the photodegradation...
-
Extractive detoxification of hydrolysates with simultaneous formation of deep eutectic solvents
PublikacjaThe hydrolysis of lignocellulosic biomass results in the production of so-called fermentation inhibitors, which reduce the efficiency of biohydrogen production. To increase the efficiency of hydrogen production, inhibitors should be removed from aqueous hydrolysate solutions before the fermentation process. This paper presents a new approach to the detoxification of hydrolysates with the simultaneous formation of in-situ deep eutectic...
-
Theoretical analysis of heat transfer between a liquid layer formed by an impinginf gas liquid jet AND a solid surface
PublikacjaHeat transfer phenomenon between a horizontal solid surface and a liquid layer created on a surface by an axisymmetrical liquid gas impinging jet has been analysed. The analytical treatment of the phenomenon is devoted to the area whose diameter is lower than the diameter of the hydraulic jump. W pracy przedstawiono teoretyczną analizę wymiany ciepła pomiędzy warstwą cieczy a stałą powierzchnią po której przepływa.
-
Porównanie szybkości wnikania tlenu w reaktorze airlift z odwrotną warstwą fluidalną i pokrewnych reaktorach barbotażowych
PublikacjaBadano wpływ parametrów procesowych na szybkość wnikania tlenu w reaktorze airlift z cyrkulacją zewnętrzną i odwrotna warstwą fluidalną w strefie opadania. Omówiono zależności między współczynnikiem wnikania tlenu dla reaktora airlift oraz zawiesinowego reaktora airlift z cyrkulacja zewnętrzną, reaktora airlift z warstwą fluidalną w strefie wznoszenia i zawiesinowej kolumnie barbotażowej. Określono udział mikropęcherzy w wymianie...
-
Experimental validation of the theoretical analysis of heat transfer between a liquid layer formed by an impinging jet and a solid surface
PublikacjaPrzedstawiono wyniki badań eksperymentalnych wymiany ciepła między poziomą powierzchnią a przepływająca po niej warstwa cieczy utworzoną z napływającej strugi gazowo-cieczowej. Wyniki badań eksperymentalnych porównano z modelem teoretycznym zjawiska.
-
Characteristics of calcium carbonate microparticles fabricated by the emulsion-emulsion technique in a large scale
PublikacjaReaktor zbudowany z dwóch współosiowych kolumn z mieszaniem w kolumnie wewnętrznej zastosowano do strącania cząstek węglanu wapnia metodą mieszania dwóch emulsji woda w oleju zawierających chlorek wapnia oraz węglan sodu jako reagenty. Zbadano wpływ częstości obrotów mieszadła, stężenia reagentów oraz czasu starzenia na wielkość cząstek stałych.
-
Oxygen accumulation rate with and without live bacteria in column bioreactors
PublikacjaBadano wnikanie i akumulację tlenu w reaktorach airlift z cyrkulacją zewnetrzną. Stosowano reaktory z odwrotną warstwą fluidalną w strefie opadania, warstwą fluidalną w strefie wznoszenia oraz reaktor z cyrkulującą zawiesiną. Badano wpływ prędkości przepływu powietrza oraz stężenia cząstek stałych na szybkośc akumulacji tlenu w cieczy w reaktorach nie zawierających bakterii oraz w obecności bakterii Acinetobacter calcoaceticus...
-
The effect of pressure on heat transfer during pool boiling of water-Al2O3 and water-Cu nanofluids on stainless steel smooth tube
PublikacjaPrzedstawiono wyniki badań eksperymentalnych wrzenia nanocieczy woda-Al2O3 i woda-Cu o koncentracjach nanocząstek 0.01%, 0.1% oraz 1% przy ciśnieniu absolutnym 10 kPa, 100 kPa oraz 200k Pa.
-
Alternative cogeneration thermodynamic cycles for domestic ORC
PublikacjaThe Organic Flash Cycle (OFC) is suggested as a vapor power cycle that could potentially improve the efficiency of utilization of the heat source. Low and medium temperature finite thermal sources are considered in the cycle. Additionally the OFC’s aim is to reduce temperature difference during heat addition. The study examines 2 different fluids. Comparisons are drawn between the OFC and an optimized basic Organic Rankine Cycle...
-
Criteria for selection of working fluid in low-temperature ORC
PublikacjaThe economics of an ORC system is strictly linked to thermodynamic properties of the working fluid. A bad choice of working fluid could lead to a less efficient and expensive plant/generation unit. Some selection criteria have been put forward by various authors, incorporating thermodynamic properties, provided in literature but these do not have a general character. In the paper a simple analysis has been carried out which resulted...
-
CaO-based high temperature CO2 sorbents – Literature review
PublikacjaThe use of CaO-based adsorbents has a high potential to capture CO2 from various systems due to its high reactivity with CO2, high capacity, and low cost of naturally derived CaO. The application of CaO-based sorbents to remove carbon dioxide is based on a reversible reaction between CaO and CO2. However, multiple carbonation/calcination cycles lead to a rapid reduction in the sorption capacity of natural CaO, and therefore efforts...
-
Prediction of coking dynamics for wet coal charge
PublikacjaA one-dimensional transient mathematical model describing thermal and flow phenomena during coal coking in an oven chamber was studied in the paper. It also accounts for heat conduction in the ceramic oven wall when assuming a constant temperature at the heating channel side. The model was solved numerically using partly implicit methods for gas flow and heat transfer problems. The histories of temperature, gas evolution and internal...