Wyniki wyszukiwania dla: NEXT GENERATION
-
Reception of GNSS Signals Under Jamming Conditions
PublikacjaThe article focuses on performance of Global Navigation Satellite System receivers in environment where intentional interference is present. First part is a general description of GNSS systems. Secondly, types of positioning service disturbances are specified. In the third part authors present a scheme of measurement stand which is used to evaluate the influence of interference on reception of navigation signals. Next, research...
-
SIMPLIFIED DYNAMIC MODEL OF ROTATING BEAM
PublikacjaIn the paper a hybrid model of rotating beam is presented. It was obtained by using two methods: modal decomposition and spatial discretization. Reduced modal model was built for the system without the load related to inertia forces that occur during beam rotation. This inertia load was next modeled by using the method of simply spatial discretization and combined with reduced modal model. This approach allows to obtain accurate...
-
Direct algorithm for optimizing robust MPC of drinking water distribution systems hydraulics
PublikacjaModel-based predictive control is an effective method for control the large scale systems [1]–[6], [8], [16], [17]. Method is based on on-line solution of the control task over the control horizon using current and past measurements, as well as the system model. Only a first element of calculated control sequence is applied to the plant. At the next sampling instant, based on new process output measurements, control procedure is...
-
Age management in the Baltic Sea Region
PublikacjaThis chapter takes a broader view on the issues connected with age management. In its first part, some demographic processes in the European Union countries are described. Those processes contribute to the ageing of the society and an increasing need for age management at various levels. Furthermore, situation in selected Baltic Sea Region countries is presented. In the next section, age management from organizational perspective...
-
Modeling of performance and safety of a multi-task unmanned autonomous maritime vehicle = Modelowanie ruchu i bezpieczeństwa wielozadaniowego bezzałogowego autonomicznego pojazdu wodnego
PublikacjaAt the beginning of the paper the aim of research is presented. Then the method is introduced. Next, the unmanned autonomous maritime vehicle is briefly described. The following chapter concerns a model of vehicle performance including the ballasting and motion. Some information on an integrated steering, positioning and stabilization system of the vehicle is briefly presented in the paper. Such the system enables to obtain a fully...
-
Air Pollution: Monitoring
PublikacjaThe entry presents an overview of the issues in the field of air pollution monitoring. At the beginning, the general objectives of air monitoring, ambient air quality standards for so-called criteria pollutants, and their sources are discussed. In the next part, both analytical methods and instruments for monitoring of ambient air and stack gases are briefly presented. Additionally, other approaches used in air pollution monitoring,...
-
Effects of safety barrier life cycle cost factors - identification and analysis
PublikacjaThe costs borne by road infrastructure authorities for managing and maintaining road devices such as safety barriers may be very high. This has prompted the need for identifying and analysing in detail all factors that influence the costs of safety barriers throughout their service life. To meet that need, the authors used international experience and field data collected under the LifeRoSE project to define the cost structure...
-
Tracking of the broadband source of the underwater noise in the very shallow water conditions
PublikacjaThe paper contains the result s, both theoretical and experimental , connected with the tracking of the underwater noise source as small ships, pontoon , diver and so on. The pro blem of security in the shallow water area is the challenge for underwater acousticians. In this paper there is take n into account the detection of the sources that move on the surface of the sea or underwater in shallow...
-
Selected elements of the payment cards system in Poland
PublikacjaThe following article describes the current situation of the selected elements of the payment cards system in Poland. The first part of the paper include the most common definition as well as the abbreviated history of payment cards implementation in Poland. Next, the author presents the key numbers related to the nowadays situation on the market together with benefits of using the payment cards in the whole economic system. At...
-
Celebrating 50 years of SWIMs (Salt Water Intrusion Meetings)
PublikacjaThe Salt Water Intrusion Meetings, or SWIMs, are a series of meetings that focus on seawater intrusion in coastal aquifers and other salinisation processes. 2018 marks the 50th year of the SWIM and the 25th biennial meeting. The SWIM proceedings record half a century of research progress on site characterisation, geophysical and geochemical techniques, variable-density flow, modelling, and water management. The SWIM is positioning...
-
Design of M2M Communications Interfaces in Transport Systems
PublikacjaIn the paper the principle of M2M communications in transport systems is presented. The concept of M2M system architecture is considered. Characteristics of M2M communications for example data transmission, monitoring and other services for transport applications are presented. The problem of communications interfaces design for M2M applications is analysed. Next, the proposal of M2M communication interface for transport applications...
-
Resonance Frequency Calculation of Spherical Microstrip Structure Using Hybrid Technique
PublikacjaIn this paper the spherical microstrip structure is considered. The structure is composed of a metallic patch with an arbitrary shape placed on a dielectric coated metallic sphere. In the analysis the hybrid technique is utilized. In this approach the finite-difference technique is applied in a cavity model to determine the current basis functions on the patch. Next, using method of moments, the resonance frequency of the structure...
-
History and Perspective of Treatment Wetland in Poland – Part One: Lesson learned
PublikacjaEarly implementation of treatment wetlands under supervision of the researchers from were quite promising. The constructed facilities ensured effective wastewater treatment and sludge dewatering. In the next years a number of treatment wetland s systems were constructed without following the designing principles and left without proper maintenance. In the consequence this lead to unsatisfactory treatment results. Investigations...
-
Modelling selected road safety measures at the regional level in Europe
PublikacjaRegions are Europe’s basic levels of management. The literature was reviewed to identify regional safety analyses and some of the factors that are important for road safety in the regions. Next, data were collected atthe regional NUTS 2 level in Europe for the years 1999-2008. An analysis of the data helped identify f actors which have the strongest bearing on fatalities and other safety measures. This paper presents the initial...
-
Diagnostic Models and Estimators for LDI in Transmission Pipelines
PublikacjaThis article considers and compares four analytical models of the pipeline flow process for leak detection and location tasks. The synthesis of these models is briefly outlined. Next, the methodology for generating data and diagnosing pipes is described, as well as experimental settings, assumptions and implemented scenarios. Finally, the quality of model-based diagnostic estimators has been evaluated for their bias, standard deviations...
-
Selected aspects of logistics management of the production process in an enterprise
PublikacjaThe following article presents selected aspects of management of production logistics process in enterprise. Companies treat this part of business as a way to empower market position. In the first part author explained the idea of process. The next part describes the definition of logistics production management, which is crucial for manufacturing enterprises. However, author described lots of tools related to production management...
-
Validation of an Agent and Ontology-based Information Technology Assessment System
PublikacjaThe aim of this paper is to present a new method of the validation of an Agent and Ontology-based Information Technology Assessment System. In the introduction part of the paper, the characteristics of the proposed multi-agent system are presented. Next, some important details regarding the ontology functionality of this system are described and an approach to its verification process is proposed. The approach employs semantic...
-
Determination of the Vehicles Speed Using Acoustic Vector Sensor
PublikacjaThe method for determining the speed of vehicles using acoustic vector sensor and sound intensity measurement technique was presented in the paper. First, the theoretical basis of the proposed method was explained. Next, the details of the developed algorithm of sound intensity processing both in time domain and in frequency domain were described. Optimization process of the method was also presented. Finally, the proposed measurement...
-
New approach to railway noise modeling employing Genetic Algorithms
PublikacjaMain goal of this paper was to describe an innovative method of noise prediction based on Genetic Algorithms. First part of the paper addresses the problem of growing noise, mainly in the context of a unified method for measuring noise. Further, Genetic Algorithms are described with regards to their fundamental features. Further a description is provided as to how Genetic Algorithms were used in the area of noise modeling. Next...
-
Information technology assessment using a functional prototype of the agent based system
PublikacjaIn the paper authors present the progress of works related with the agent-based system serving the purpose of information technology assessment. Currently this is a prototype including agents, the knowledge base and the ontology; the domain incorporated by the assessment-enterprise managing technologies with special attention paid to technologies directed to IT projects. In this paper, besides indication of expected functionalities...
-
Equitable coloring of corona products of graphs
PublikacjaIn this paper we consider an equitable coloring of some corona products of graphs G and H in symbols, G o H). In particular, we show that deciding the colorability of G o H is NP-complete even if G is 4-regular and H is K_2. Next, we prove exact values or upper bounds on the equitable chromatic number of G o H, where G is an equitably 3- or 4-colorable graph and H is an r-partite graph, a path, a cycle or a complete graph.
-
Digital technologies and women's empowerment – casting the bridges
PublikacjaThis work briefly discusses the nexuses between digital technology development and adoption across societies, and its potential impact on overall welfare through women’s economic empowerment. In the first section it sets out the context and background. Next, Section 2 demonstrates the state of access to and the use of digital technologies across the world. Section 3 intends to trace the causal links and channels of digital technologies'...
-
Very high altitude micro air vehicle deployment method
PublikacjaThe paper presents the original work and method for high altitude micro air vehicle deployment. The method is based on the scientific ballooning, and adapted for stratospheric flight of commercial off-the-shelf micro air vehicle in flying wing configuration. The High Altitude Micro Air Vehicle, built for this research, was deployed during a test experiment at the lower level of the stratosphere. The results of the experiment and...
-
Material Parameters Identification of Historic Lighthouse Based on Operational Modal Analysis
PublikacjaIn the present paper, the identification of the material parameters of a masonry lighthouse is discussed. A fully non-invasive method was selected, in which the material properties were determined via numerical model validation applied to the first pair of natural frequencies and their related mode shapes, determined experimentally. The exact structural model was built by means of the finite element method. To obtain experimental...
-
Numerical Studies on Propellers in Open Water and behind Hulls aiming to support the Evaluation of Propulsion Tests
PublikacjaA RANS based numerical analysis of propellers can contribute considerably to our understanding of propeller/hull interaction. It may also allow for a review of scaling procedures on results from experimental fluid dynamics (EFD). Using various RANS codes (Fluent, CFX, STAR-CCM+ and FreSCo+) on common test cases the authors first focused on propeller open water (POW) calculations. Next we simulated the propeller hull interaction...
-
Hybrid, Approximate Models of Distributed-Parameter Systems
PublikacjaThe paper introduces the method of distributed-parameter systems modelling. It enables to obtain low order modal model of the system that experiences Coriolis acceleration component and gyroscopic effect. In such cases, corresponding system equations are non-self-adjoined. To solve this problem modal reduced model is built up for the system without Coriolis acceleration or gyroscopic effect terms. These phenomena are next included...
-
3D Computer Model of the Hip Joint Cartilage
PublikacjaThis paper presents 3D computer model of the hip joint cartilage in the ANSYS program. Model is made on the basis of anatomy and collected data on the material constants of bone and cartilage components. Analysis and comparison of biochemical model, viscoelastic and molecular mixed - aggregation serves to facilitate the creation of the next model of reality, which could be used in the design of joint prostheses. The correctness...
-
Modeling of Combined Phenomena Affecting an AUV Stealth Vehicle
PublikacjaIn the paper some results of research connected with modelling the basic stealth characteristics of an AUV vehicle are presented. First of all a general approach to design of the stealth AUV autonomous underwater vehicle under consideration is introduced. Then, the AUV stealth vehicle concept is briefly described. Next a method of modelling of the stealth characteristics is briefly described as well. As an example of the stealth...
-
Performance evaluation of GPS anti-spoofing system based on antenna array processing
PublikacjaThis article concerns the problem of detection and mitigation of spoofing attacks in Global Navigation Satellite Systems. First, background information about spoofing and its possible countermeasures is provided. Next, concept of a novel GPS anti-spoofing system based on antenna array processing is presented and implementation of prototype of this system is described. The third section outlines the performance evaluation of proposed...
-
Estimation of a single balun parameters on the base of back-to-back measurements
PublikacjaA method of estimation of a single balun S parameters based on the measured parameters of back-to-back configuration is presented in the paper. Proposed approach is to measure two back-to-back circuits: i) direct connection of baluns and ii) connection with additional transmission line segment between the baluns. Coupling effects in both circuits are calculated from full-wave simulations. Next they are applied to estimate the parameters...
-
Malware - a survey on threats and mitigation techniques
PublikacjaThis paper presents up-to-date knowledge related to malware – malicious software. Firstly the definitions are presented and discussed briefly. Next, the paper presents a bit of motivation along with the malware fighting objectives. Malware poses an emerging threat in accordance to smart grids in general and advanced metering infrastructure in particular. The discussion is then directed towards known taxonomy along with a new proposal...
-
Political relations between Poland and the Republic of Azerbaijan
PublikacjaPoland was one of the first countries to recognize the independence of the Republic of Azerbaijan. However, the political co-operation between the two countries was established only at the end of the last decade of the 20th century, during the presidency of Aleksander Kwaśniewski. The next Polish president – Lech Kaczyński – intending to diversify the energy sources, maintained political relations between Poland and the Republic...
-
STEADY STATE VISUALLY EVOKED POTENTIALS FOR BRAIN COMPUTER INTERFACE
PublikacjaAn experiment conducted to validate a possibility of use a single active electrode EEG device for detecting Steady State Visually Evoked Potentials (SSVEP) is shown. A LED stimulator was applied to stimulate patients with two different frequencies - 13 Hz and 17 Hz. First, EEG signals were recorded and pre-processed using MATLAB software. In the next step recordings were analysed and classified employing the WEKA software. As indicated...
-
Resonance microstrip structure with patch of arbitrary convex geometry with the use of field matching technique
PublikacjaAn analysis of the resonance frequency problem of planar microstrip structure with patch of arbitrary convex geometry is presented. A full-wave analysis is employed utilizing a combination of Galerkin’s moment method and field matching technique. In this approach, a field matching technique is adopted to calculate the patch surface current densities, and next the method of moments is utilized to calculate resonance frequencies...
-
Bankruptcy system model and efficiency versus the entrepreneurship and innovation in selected European countries
Publikacjamodel and its efficiency on the development of entrepreneurship and innovation in selected European countries and Turkey. This goal was achieved by examining the relationships between debtor-friendliness of the bankruptcy law model and its efficiency on one side and entrepreneurship and innovation on the other. The cross-sectional ANOVA test and OLS regression method were chosen as the research method. In order to verify the research...
-
Heart rate PPG signals with acceleration captured at wrist during small and moderate body movements
Dane BadawczeHeart rate PPG signals with acceleration captured at wrist during small and moderate body movements
-
Methods of the privatization process of Polish state-owned enterprises in years 1990‒2015
PublikacjaThis article presents methods of the privatization process of state-owned enterprises in Poland in the period of years 1990‒2015. The author presents the change of number of state-owned companies over the selected period as well as describes the main methods of ownership transformation used in Poland. First part presents the mechanism of commercialization. Second discusses the indirect privatization and contribution to NFI. Next,...
-
Analysis of possible application of high-temperature nuclear reactors to contemporary large-output steam power plants on ships
PublikacjaThis paper is aimed at analysis of possible application of helium to cooling high-temperature nuclear reactor to be used for generating steam in contemporary ship steam-turbine power plants of a large output with taking into account in particular variable operational parameters. In the first part of the paper types of contemporary ship power plants are presented. Features of today applied PWR reactors and proposed HTR reactors...
-
Studies of the mechanism of metal metal dusting of 10CrMo9-10 steel after 10 years of operation in trhe semi-regenerative catalytic reformer
PublikacjaThe study showed that metal dusting mechanism of 10CrMo9-10 steel operated in industrial environment differs from models developed in laboratories. Significant differences lie in the fact that the models developed in laboratories only assume the formation of metastable carbide M3C, while studies have shown that the formation of M3C carbides is associated with the transformation of primary carbides and in the next stage is preceded...
-
Energy Consumption Modeling in SPMD and DAC Applications
PublikacjaIn this chapter, we show a study of energy consumption during execution of SPMD and DAC application – the same applications which time of execution we modeled in the previous two chapters. We measured an average power usage at a single node of the GALERA+ cluster during application execution and then we modeled the total energy consumption by the application. Next we simulated the applications using MERPSYS and we compared the...
-
Hybrid piezoelectric motor based on electroactive lubrication principle
PublikacjaA novel conception of hybrid piezoelectric motor is presented in this paper. Proposed conception required synchronised work of quasi-static and resonant piezoelectric actuators that results in a rotary movement. The motor's working principle is explained and the main characteristics are described. Studied topology is compared to the existing piezoelectric motors with regards to its field of applications. The assembling process...
-
Hydrodynamic Pressure Field of a Ship on Shallow Water
PublikacjaResults of calculations of the hydrodynamic pressure field around the ship were obtained by application of the boundary element method. Hydrodynamic field was calculated for a Polish Navy’s tugboat and transport ship using a program called SHiPP and compared with measurements of the field taken on river near Swinoujscie for two identical tugs H-4 and H-10. Next, a series of HPF calculations was carried out on planes situated at...
-
Design criterion for hydrodynamic vortex separators
PublikacjaTechnical objects designing involves determination of geometrical parameters that characterize a given object. When the device is described by the differential equations, an inverse problem brings difficulties, as geometrical values sought condition the solution to the problem. Vortex separators can be designed by the "criterion method'. Firstly, a critical particle is distinguished such that bigger particles are removed from...
-
A Three-Step Approach to Estimation of Reduction Potentials of Natural Mixtures of Antioxidants Based on DPPH Test; Illustration for Catechins and Cocoa
PublikacjaThe aim of this study is to propose a methodology to assess electrochemical properties of complex mixtures of antioxidants, such as plant extracts, based on the results of simple and popular DPPH test. The first, most difficult step, involves determinations of standard reduction potentials (E0) for the series of purified compounds (here catechins). The next step is the calculation of stoichiometric values (n10) based on the results...
-
Electromagnetic Modeling of Microstrip Elements Aided with Artificial Neural Network
PublikacjaThe electromagnetic modeling principle aided withartificial neural network to designing the microwave widebandelements/networks prepared in microstrip technology is proposedin the paper. It is assumed that the complete information is knownfor the prototype design which is prepared on certain substratewith certain thickness and electric permittivity. The longitudinaland transversal dimensions of new design...
-
Quality 5.0: A Paradigm Shift Towards Proactive Quality Control in Industry 5.0
PublikacjaIndustry 5.0, the latest wave of industrial revolution, is redefining the traditional manufacturing and production landscapes by leveraging advanced technologies, promoting sustainability, and fostering a human-centric approach. An inevitable consequence of this progression is Quality 5.0, the next phase of quality control and assurance. Quality 5.0 aims to transcend the limitations of conventional quality control techniques, which...
-
Progress on Roman and Weakly Connected Roman Graphs
PublikacjaA graph G for which γR(G)=2γ(G) is the Roman graph, and if γwcR(G)=2γwc(G), then G is the weakly connected Roman graph. In this paper, we show that the decision problem of whether a bipartite graph is Roman is a co-NP-hard problem. Next, we prove similar results for weakly connected Roman graphs. We also study Roman trees improving the result of M.A. Henning’s A characterization of Roman trees, Discuss. Math. Graph Theory 22 (2002)....
-
Employee Suggestion Program as a way to involve employees in improving business processes
PublikacjaThe following article presents one of the Lean Management tools – employee suggestion program. Companies consider this method as a way to involve employees in improving business processes. In the first part of the article the author explained the idea of the Japanese management system. The next part presents the philosophy of Kaizen, which is crucial for proper implementation of Lean Management concept in the company. Moreover,...
-
The importance of a place in a small or medium - Sized Town.- Vol. 2
PublikacjaPublic space is a matter of concern for international humanitarian organisations. The paper describes the initiative of UNHabitat organisation for the creation of Charter of Public Space and the draft of this document. Next the definition of “place” is provided and the definitions of social capital and the bond between social capital and place attachment are presented. The actions proposed nowadays to create places are described....
-
Quality Assurance of Educational Processes as the Foundation of the Quality Management System in Gdansk University of Technology
PublikacjaThe paper presents a model of quality management system (QMS) developed by the author in Gdansk University of Technology (GUT). The core of the model is internal quality assurance system of educational processes based on the ENQA guidelines. Next described in the paper steps of GUT QMS development are the implementation of one of the normative QMS models (e.g. ISO 9001, ISO/IEC 17025) in selected organizational units of GUT and...