prof. dr hab. inż. Józef Haponiuk
Employment
- Professor at Department of Polymers Technology
- 1974 - present Full Professor at Polymers Technology Department
Research fields
Publications
Filters
total: 193
Catalog Publications
Year 2016
-
A recent developments in polyurethane foams containing a low-cost and pro-ecological modifiers
PublicationDiversity of the polyurethane (PU) foams applications cause that investigation of the relationships between their structure and properties is currently very popular topic among the many research institutions and companies. At the turn of the last years many scientific papers about PU foams and their composites were published. The one of the main research trends in this field is related to the reduction of production costs of...
-
Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends
PublicationLDPE/GTR/elastomer ternary blends with variable LDPE/GTR ratio and constant elastomer content were prepared via melt-compounding. Obtained LDPE/GTR/elastomer blends were applied as thermoplastic modifiers into bitumen. Microstructure, physical and thermal properties of the modified bitumen were determined. It was observed that chemical composition of LDPE/GTR/elastomer blends has significant influence on their density and rheological...
-
Badania próbek płyt podeszwowych dostarczonych przez Zamawiającego
PublicationPrzedmiotem umowy jest przeprowadzenie badań mających na celu określenie czy dostarczone przez Zamawiającego próbki płyt podeszwowych zostały wykonane z tworzywa termoplastycznego.
-
Biopolyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal characterization
PublicationIn this work lignocellulose biomass liquefaction was used to produce biopolyols suitable for the manufacturing of rigid polyurethane foams. In order to better evaluate the mechanism of the process, pure cellulose was applied as a raw material. The effect of time and temperature on the effectiveness of liquefaction and the parameters of resulting biopolyols were characterized. The prepared materials were analyzed in terms of their...
-
Interfacial adhesion evaluation in (low-density polyethylene)/elastomer blends
PublicationLow-density polyethylene (LDPE) with different elastomers at a ratio of 50/50 wt% blends was prepared by using a co-rotating twin-screw extruder. Three kinds of elastomers were used: ground tire rubber (GTR), partially crosslinked butyl rubber (KalarVR ), and styrenebutadiene- rubber block copolymer (SBS; KratonVR ). For better characterization of interaction between polyethylene and elastomer, influence of the type of elastomer on...
-
Microwave Assisted Liquefaction with Crude Glycerol as a Potential Method of Brewer’s Spent Grain Utilization
Publication -
Microwave assisted liquefaction with crude glycerol as a potential method of brewer's spent grain utylization
PublicationBrewer's spent grain was applied as a low-cost industrial type of lignocellulose biomass in a liquefaction and solvent: biomass ratio on the efficiency of the process, chemical structure and basic properties of obtained prepared polyols and soil residues shed light on the biomass degradation mechanism through application of microwaves and further reaction of degradation products with solvent particles.
Year 2008
-
Advanced coating of interior of tanks for rising environmental safety - novel applications of polyurethanes
Publication -
Advanced coating of interior of tanks for rising environmental safety of tankers - novel applications of polyurethanes
PublicationOpisano technologię nanoszenia ciekłego systemu poliuretanowego na niewygrzewane elementy stalowe i stalowo-betonowe oraz sposób łączenia powłoki poliuretanowej z wymienionymi materiałami, a także między sobą przy użyciu odpowiednich środków adhezyjnych. Scharakteryzowano metodę utylizacji i odzysku polioli z zużytych w badaniach powłok poliuretanowych w recyklingu surowcowym poprzez zastosowanie małoczšsteczkowych glikoli jako...
-
Advanced coating of Tank Interior as means of Rising Environmental Safety of Tankers/RIM technology
Publication -
Dynamic mechanical properties and thermal degradation process of the compositions obtained from unsaturated poly(ester urethanes) cross-linked with styrene
PublicationW pracy przedstawiono właściwości dynamiczno-mechaniczne oraz stabilność termiczną poli(estro uretanów) sieciowanych styrenem. Badane poli(estro uretany) syntetyzowano z nienasyconych oligomeroli opartych na cis-2-buten-1,4-diolu oraz 4,4`-diizocyjanianie difenylometanu. Wyniki badań dynamicznych właściwości mechanicznych otrzymanych poliuretanów potwierdziły separację fazową uzyskanych kompozycji. W pracy przedstawiono również...
-
Dynamic mechanical properties and thermal degradation process of the compositions obtainedfrom unsaturated poly(ester urethanes) cross-linked with styrene
Publication
Year 1990
-
Application of the DSC analysis of thermoplastic polyurethane elastomers to a comparative study of their technological properties
Publication -
Crystallization kinetics of poly(ethylene adipate) investigated by differential scanning calorimetry
Publication
Year 2012
-
Badania wpływu konstrukcji układu uplastyczniającego oraz prędkości obrotowej ślimaków na jakość dewulkanizatów otrzymanych metodą ciągłą
PublicationPrzedstawiono wyniki badań procesu termomechanicznej dewulkanizacji ciągłej rozdrobnionych odpadów gumowych prowadzonej przy użyciu wytłaczarki dwuślimakowej współbieżnej. Scharakteryzowano wpływ konfiguracji ślimaków oraz prędkości obrotowej ślimaków na parametry pracy wytłaczarki, zawartość ekstraktu acetonowego, zawartość frakcji zol-żel, stopień dewulkanizacji oraz lepkość Mooney`a otrzymanych produktów. Określono wpływ wtórnej...
-
Badanie wytrzymałości warstwowych połączeń elementówpoliuretanowo-stalowych
PublicationOpracowano skład systemu poliuretanowego oraz warunki jego nanoszenia na elementy stalowe, które nie wymagały dalszego ich wygrzewania. Zbadano wpływ stopnia rozwinięcia powierzchni płaskownika na wytrzymałość mechaniczną połączeń poliuretanowo-stalowych. Analizowano również wpływ czasu odparowywania rozpuszczalnika z kleju oraz jego grubość na wytrzymałość połączeń między materiałami.
-
Gęstość usieciowania, właściwości termiczne oraz morfologia wulkanizatów SBR-dewulkanizat o różnej całkowitej zawartości sadzy
PublicationPrzedstawiono wyniki badań wpływu zawartości sadzy na właściwości usieciowanych mieszanin kauczuku butadienowo-styrenowego i dewulkanizatu gumowego otrzymanego metodą ciągłą, przy użyciu wytłaczarki dwuślimakowej współbieżnej. Scharakteryzowano zależności pomiędzy sumaryczną ilością sadzy, stanowiącą sumę sadzy dodawanej i sadzy zawartej w dewulkanizacie gumowym na gęstość usieciowania, dynamiczne właściwości mechaniczne, odporność...
-
Influence of the glycolysis agent on the structure of the glycolysates obtained from polyether-urethane wastes
PublicationW pracy zaprezentowano wybrane wyniki badań wpływu środków glikolizujących na strukturę glikolizatów otrzymywanych w procesie glikolizy odpadowych pianek polietero-uretanowych.
-
Mechanical, structural and diffusion studies of hydrogel polyurethane nanocomposites containing modified montmorillonite
PublicationW pracy zaprezentowano wyniki badań hydrożeli poliuretanowych zawierających poli(tlenek etylenu) oraz montmorylonit. Otrzymane układy scharakteryzowano z użyciem technik XRD, DMA, badań mechanicznych oraz wyznaczono chłonność wody i parametry dyfuzji.
-
Mechanical, Structural and Diffusion Studies of Hydrogel Polyurethane Nanocomposites Containing Modified Montmorillonite
Publication
Year 2010
-
Badanie stabilności prepolimerów estrouretanowych
PublicationPrepolimery estrouretanowe otrzymywano na podstawie oligoeestrolu ("Poles 55/20) i użytego w nadmiarze 4,4-iizocyjanianodifenylometanu. Określono wpływ szybkości obrotów trzpienia wiskozymetru, temperatury, procentowej zawartości grup NCO na wartości lepkości tych produktów. Oceniono stabilność prepolimerów w toku przechowywania w ciągu 4 tygodni (zmiana zawartości grup NCO). Budowę chemiczną uzyskanych prepolimerów ustalono...
-
Characteristics of the conductivity of polyurethane nanocomposite
PublicationW opracowaniu tym przedstawiono właściwości mechaniczne oraz przewodnictwo jonowe otrzymanych nanokompozytów poliuretanowych. KOmpozyty te były otrzymane przy wykorzystaniu wytłaczarki dwuślimakowej. POddano je badaniom wytrzymałościowym, spektroskopii impedancyjnej, spektroskopii w podczerwieni oraz badaniom dynamiczno - mechanicznym (DMA)
-
Charakterystyka właściwości mechanicznych oraz przewodzących stałych przewodzących kompozytów poliuretanowych
PublicationCelem przeprowadzonych badań było określenie właściwości mechanicznych i przewodzących nowych elektrolitów poliuretanowych. Elastomery poliuretanowe, stanowiące matrycę badanych układów, zsyntezowano przy użyciu 4,4'- diizocyjanianu difenylometanu (MDI), oligo(oksytetrametyleno)diolu (PTMG) i 1,4 butanodiolu (BDO). Sól LiClO4 oraz nanonapełniacz wprowadzono wykorzystując wytłaczarkę dwuślimakową. Przewodnictwo jonowe wyznaczono...
-
Investigation of stability of ester-urethane prepolymers
Publication
Year 2021
-
Bio-Based Polyurethane Networks Derived from Liquefied Sawdust
PublicationThe utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated. The liquefaction process was carried...
-
Morphology, Thermo-Mechanical Properties and Biodegradibility of PCL/PLA Blends Reactively Compatibilized by Different Organic Peroxides
PublicationReactive blending is a promising approach for the sustainable development of bio-based polymer blends and composites, which currently is gaining more and more attention. In this paper, biodegradable blends based on poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) were prepared via reactive blending performed in an internal mixer. The PCL and PLA content varied in a ratio of 70/30 and 55/45. Reactive modification of PCL/PLA...
-
Novel Research on Biomedical Polyurethanes
PublicationThe variety of mechanical properties characterizes properly designed PURs. They may be biocompatible and reveal compatibility with blood, making them attractive materials for the fabrication of tissue scaffolds; however, like all synthetic materials, PURs don’t reveal sufficient biocompatibility. PURs may undergo certain chemical modifications (e.g., 1,4:3,6-dianhydro-D-sorbitol, ascorbic acid (AA), growth factors, covering with...
Year 2002
-
Biodegradation of modified poly(î-caprolactone) in different environments
PublicationPorównano odporność na biodegradację różnych filmów poliepsilon kaprolaktonu w wodzie morskiej z Bałtyku, w roztworze soli, w wodzie morskiej z azydkiem sodu oraz w kompoście z osadem czynnym. Oceniano zmiany ubytku wagi, lepkość właściwości wytrzymałościowe, stopień krystaliczności i morfologię przed i po procesie degradacji. Filmy z dodatkiem środków antypoślizgowych, degradowane w środowiskach naturalnych ulegały rozkładowi...
Year 2018
-
Biopolymer based nanomaterials in drug delivery systems: A review
PublicationDrug delivery systems (DDS) are used to achieve a higher therapeutic effects of a pharmaceutical drug or natural compound in a specific diseased site with minimal toxicological effect and these systems consists of liposomes, microspheres, gels, prodrugs and many. Nanotechnology is a rapidly developing multi-disciplinary science that ensures the fabrication of the polymers to nanometer scale for various medical applications. Uses...
-
Biopolymers and Their Composites for Drug Delivery: A Brief Review
PublicationIn recent years, excipient development has become a core area of research in pharmaceutical drug delivery because it influences the formulation development and drug delivery process in various ways. Polymeric drug delivery systems have been of great interest for controlled delivery as they show the great advantage in drug delivery systems because of optimized drug loading and releasing property. Then, the side effects of synthetic...
-
Cellulose Nanomaterials in Biomedical, Food, and Nutraceutical Applications: A Review
PublicationNanotechnology with bionanomaterials have tremendous potential to enhance and utilize for nutrient and bioactive absorption, drug delivery systems, pharmaceutical, and nutraceutical field through various applications. Cellulose nanomaterials are green materials that are obtained from renewable sources and possess exceptional mechanical strength and biocompatibility. The associated unique physical and chemical properties have made...
-
GOOD HEALTH PRODUCTS AND POLYMER COMPOSITES OBTAINED WITH THE USE OF NATURAL ORIGIN MICRO- AND NANOFIBERS
PublicationThe aim of this work was focused on good health products and polymer composites obtained with the use of natural origin micro- and nanofibers. Many different type of the natural plants are used in the production of good health products and polymer processing like curcuma, cellulose, microalgae and others. Often are used as a antioxidants and fillers. In this work the effect of algae and cellulose as a microfillers on the chosen...
Year 2007
-
Budowa chemiczna a właściwości usieciowanych poli(estrouretanów)
PublicationW pracy przedstawiono wyniki badań wpływu struktury chemicznej usieciowanych poli(estrouretanów) (PEU) na ich statyczne i dynamiczne właściwości mechaniczne. Poli(estrouretany) syntetyzowane z oligo(alkilenoaryloestro)dioli (OAAE) oraz 4,4`-diizocyjanianu difenylometanu sieciowano za pomocą metakrylanu metylu, poprzez kopolimeryzację sieciującą, inicjowaną rodnikowo. Badania statycznych i dynamicznych właściwości mechanicznych...
-
Kinetyka reakcji utwardzania eteru diglicydylowego bisfenolu-Amodyfikowanego 2-hydroksyetylometyloakrylanem
PublicationObecnie na świecie zużywa się około 1,3 mln ton żywic epoksydowych rocznie a prognozy wzrostu zapotrzebowania na tę grupę materiałów polimerowych są obiecujące, ze względu na nieskomplikowaną technologię ich wytwarzania. Wiele ośrodków naukowych prowadzi badania w kierunku uzyskania coraz to lepszych parametrów fizyko-chemicznych pozwalających na rozszerzenie spektrum ich zastosowania. Badania te prowadzą również do zmiany w budowie...
-
Ocena stabilności termicznej kompozycji otrzymanych z nienasyconych poli(estrouretanów) sieciowanych styrenem
PublicationPoli(estrouretany uzyskano w reakcji nienasyconych oligo(alkilenoestro)dioli z 4,4`-diizocyjanianem difenylometanu. Oligomerole otrzymano w wyniku polikondensacji bezwodnika kwasu ftalowego, kwasu adypinowego z glikolem etylenowym i cis-2-buten-1,4-diolem. Proces syntezy poli(estrouretanów) prowadzono metodą prepolimerową zmieniając stosunek molowy grup [NCO/OH] w zakresie od 2/1 do 1/2.
Year 2014
-
Characterization and properties of LDPE/(ground tire rubber)/crosslinked butyl rubber blends
Publication -
Characterization and properties of LDPE/(ground tire rubber)/crosslinked butyl rubber blends
PublicationIn recent years, interest in used rubber recycling, mainly focusing on the utilization of end-of-life tires, has heightened. This interest, is owing to the activities related to environmental protection and economic factors, which both stimulate companies to reuse the high-quality rubber present in ground rubber scrap. In this study, the application of crosslinked butyl rubber in thermoplastic compositions of low-density polyethylene...
-
Compatibilization of polymeric composition filled with ground tire rubber – short review
PublicationWaste rubber is recognized as valuable materials resource and searching for new recycling methods is the main activity of many research institutions and companies. At the turn of the last years only few scientific papers about foamed polymer compositions filled with ground tire rubber were published. In paper review about progress in compatibilization and foaming of polymeric compositions filled with ground tire rubber.
-
Cross-linking of epoxy-oligomeric mixtures in the presence of modified phenol-formaldehyde resins
PublicationCross-linking of epoxy oligomeric mixtures consisting of industrial epoxy resin ED-20, oligoetheracrylate TGM-3, peroxide derivative of epoxy resin ED-24 and phenol-formaldehyde oligomer with unsaturated methacrylate fragments or peroxide groups was studied in the presence of polyethylenepolyamine at room temperature and heated to 383, 403 or 423 K for 15, 30, 45, 60 and 75 minute. The influence of mixture composition, temperature...
-
Curing characteristics, mechanical properties and morphology of butyl rubber filled with ground tire rubber (GTR)
PublicationThe results on testing application of ground tire rubber (GTR), as potential filler for butyl rubber, are pre- sented. The GTR content variation, within the range of 10–90 phr, was studied with respect to the vulcanization process, static mechanical properties (tensile strength, elongation-at-break, hardness and resilience), dynamic mechanical properties and the morphology of the obtained vulcanizates. Butyl rubber was characterized...
-
Ekspertyza w celu ustalenia utraty właściwości powłoki epoksydowej zastosowanej na konstrukcji stalowej - Raport z badań zleconych - Numer umowy: 031008
Publication.
Year 2013
-
Charakterystyka procesu ciągłej dewulkanizacji termomechanicznej z zastosowaniem metod doświadczalnych
PublicationBadano proces termomechanicznej dewulkanizacji rozdrobnionych odpadów gumowych prowadzono przy użyciu wytłaczarki dwuślimakowej współbieżnej o specjalnej konfiguracji układu uplastyczniającej, umożliwiającego wywieranie znacznych sił ścinających na miał gumowy. W badaniach doświadczalnych zastosowano metodę powierzchni odpowiedzi RSM (response surface methodology). Wyznaczono modele matematyczne wyrażające zmienność właściwości...
-
Dewulkanizacja i kompatybilizacja w wytłaczarce dwuślimakowej
PublicationDynamiczny rozwój przemysłu motoryzacyjnego przyczynił się do powstania ogromnej ilości odpadów gumowych, z których aż 80% stanowią zużyte opony samochodowe. Szacunkowe dane wskazują, że na całym świecie rocznie powstaje ponad 17 mln sztuk zużytych opon, z czego w krajach UE wycofywanych z eksploatacji jest prawie 3,3 mln opon samochodowych. W Polsce, wg szacowań Ministerstwa Środowiska, Głównego Urzędu Statycznego oraz Oddziału...
-
Effect of slightly crosslinked butyl rubber and compatibilizer additives on properties of recycled polyethylene-ground tire rubber blends
PublicationSlightly crosslinked butyl rubber, (PhMe2CO)(2) and maleic anhydride were added as compatibilizer to the recycled polyethylene-ground tire rubber blends. Recycled postprodn. and postconsumer (shredded bottle caps) polyethylene wastes were used. The thermoplastic compns. were studied for statistic and dynamic mech. properties and morphol. The addn. of butyl rubber resulted in a decrease of the tensile strength and hardness of the...
Year 2009
-
Charakterystyka stałych przewodzących kompozytów poliuretanowych
PublicationCelem przeprowadzonych badań było określenie właściwości mechanicznych i przewodzących nowych elektrolitów poliuretanowych. Elastomery poliuretanowe, stanowiące matrycę badanych układów, zsyntezowano przy użyciu 4,4'- diizocyjanianu difenylometanu (MDI), oligo(oksytetrametyleno)diolu (PTMG) i 1,4 butanodiolu (BDO). Sól LiClO4 domieszkowano do poliolu a nanonapełniacz wprowadzono podczas przedłużania łańcuchów prepolimeru za pomocą...
Year 2019
-
Chemical structures, rheological and physical properties of biopolyols prepared via solvothermal liquefaction of Enteromorpha and Zostera marina biomass
PublicationIn this work, liquefied biomass from the Baltic Sea was used for the preparation of rigid polyurethane (PUR) foams. The biomass contained 10 wt% of Enteromorpha macroalgae and 90 wt% of Zostera marina seagrass characterized by a high content of cellulose. The influence of time, temperature and the type of solvent on the efficiency of the liquefaction process and properties of biopolyols was determined. Obtained materials were analyzed...
-
Chitosan and polyvinyl alcohol nanocomposites with cellulose nanofibers from ginger rhizomes and its antimicrobial activities
PublicationThe inhibitory effect of 5% GNF bionanocomposites against Bacillus cereus, Escherichia coli, Staphylococcus aureus and Salmonella typhimurium indicated good antibacterial activity of the nanocomposites due to the addition of GNF in the biopolymer matrices. The use of GNF will help to increase the economic values of agricultural waste and the characteristic properties of GNF derived bionanocomposites could be possibly used in medical...
-
In-situ synthesis and characterization of biocompatible magnetic ginger nanofiber composites for copper (II) removal from water
Publication -
Isolation and characterization of stable nanofiber from turmeric spent using chemical treatment by acid hydrolysis and its potential as antimicrobial and antioxidant activities
Publication -
Modification of Ground Tire Rubber—Promising Approach for Development of Green Composites
Publication -
Modyfikacja biodegradowalnych poliestrów alifatycznych za pomocą inicjatorów nadtlenkowych
PublicationCzynniki ekologiczne, ekonomiczne oraz większa świadomość społeczeństwa wpływają korzystnie na dynamiczny rozwój bio- degradowalnych materiałów, które sukcesywnie zastępują polimery „konwencjonalne”. Biodegradowalne polimery zarówno ze źródeł odnawialnych, jak i nieodnawialnych wzbudzają duże zainteresowanie wielu jednostek naukowo-badawczych oraz firm, głównie w zakresie ich modyfikacji. W pracy przedstawiono wyniki badań wpływu...
-
Modyfikacja biodegradowalnych poliestrów ialifatycznych i ich mieszanin w obecności inicjatorów nadtlenkowych.
PublicationStreszczenie Czynniki ekologiczne, ekonomiczne oraz większa świadomość społeczeństwa wpływają korzystnie na dynamiczny rozwój biodegradowalnych materiałów, które sukcesywnie zastępują polimery „konwencjonalne”. Na szczególną uwagę zasługują komercyjnie dostępne poliestry alifatyczne takie jak: poli(kwas mlekowy) (PLA), poli(3-hydroksymaślan) (PHB), oraz poli(ε-kaprolakton) (PCL). Jednakże ich wysoka cena oraz problemy technologiczne...
-
Physico‐Mechanical Properties and Flammability of PUR/PIR Foams Containing Expandable Graphite Core‐Shell Composite Particles
PublicationIn this work, polyurethane/polyisocyanurate (PUR/PIR) foams were modified by two types of expandable graphite (EG) core-shell composite particles. The pulverized EG core-shell composite particles were prepared during emulsion polymerization using methyl methacrylate or glycidyl methacrylate for the synthesis of the polymeric shells (poly(methyl methacrylate) (PMMA) and poly (glycidyl methacrylate) (PGMA)), and then the obtained EG_PMMA...
Year 2015
-
Chromatografia gazowa jako skuteczne narzędzie kontroli procesu wytłaczania
PublicationPraca stanowi literaturowy przegląd możliwości wykorzystania chromatografii gazowej (GC) jako narzędzia kontroli procesu wytłaczania materiałów polimerowych. Przedstawiono charakterystykę techniki GC oraz możliwości, jakie niesie ze sobą kontrola fazy gazowej uwalnianej podczas przetwórstwa materiałów polimerowych. Na podstawie dotychczas opublikowanych prac badawczych omówiono techniki i metody wykorzystywane do izolacji lotnych...
-
Curing characteristics, mechanical and thermal properties of reclaimed ground tire rubber cured with various vulcanizing systems
PublicationGround tire rubber was thermo-mechanical reclaimed at 120 °C using a co-rotating twin screw extruder. The effect of vulcanizing system type on curing characteristics, static mechanical properties (tensile strength, elongation-at-break, hardness and resilience), dynamic mechanical properties and thermal properties of reclaimed ground tire rubber was investigated. Reclaimed rubber was cured using different types of vulcanization...
-
Ekspertyza uzupełniająca opinię biegłego sądowego dotyczącą powodu występowania wycieku uszczelniacza butylowego do wnętrza pakietu okiennego
PublicationW niniejszym dokumencie ekspertyzę uzupełniającą opinię biegłego sądowego dotyczącą powodu występowania wycieku uszczelniacza butylowego do wnętrza pakietu okiennego. Wyniki przeprowadzonych badań wskazują, iż Silikon o nazwie handlowej “Bosman” dostarczony od strony pozwanej nie jest identyczny pod względem chemicznym niż ten stosowany przez powoda. Silikon stosowany przez powoda rozmiękcza uszczelniacz butylowy stosowany w...
-
Investigation of volatile low molecular weight compounds formed during continuous reclaiming of ground tire rubber
PublicationGround tire rubber was thermo-mechanically reclaimed at different temperature conditions (80, 120, 160 °C) using a co-rotating twin screw extruder. The progress of ground tire rubber reclaiming was evaluated with specific mechanical energy, sol fraction and thermogravimetric analysis. Volatile organic compounds (VOCs) including volatile sulfur compounds (VCSs) released from ground tire rubber and ground tire rubber after reclaiming...
-
Kontrola jakości materiałów polimerowych wytwarzanych metodą wytłaczania: stan obecny i perspektywy rozwoju
PublicationNiniejsza praca stanowi przegląd literaturowy metod kontroli jakości materiałów polimerowych wytwarzanych metodą wytłaczania. Scharakteryzowano możliwości kontroli efektywności procesu wytłaczania działających w układach "on-line" oraz "in-line", które polegają na przeprowadzeniu pomiarów w czasie trwania procesu. Opisano potencjał aplikacyjny technik spektroskopowych (IR, UV-VIS), pomiarów właściwości reologicznych, analizy morfologii...
Year 2005
-
Computational modelling of the modification of epoxy resins
PublicationSymulacja komputerowa właściwości fizycznych sieci żywic epoksydowych (DGEBA/DDM) modyfikowanych związkami akrylowymi przy użyciu programu Cheops® MillionZillion Software.
-
Polyurethane nanocomposites obtained with organically modified montmorillonites.
PublicationW pracy przedstawiono wyniki badań dotyczące analizy właściwości i struktury nanokompozytu montmorylonit/poliuretan. Przeprowadzono pomiary właściwości mechanicznych i badania strukturalne z wykorzystaniem dyfrakcji promieni rentgenowskich i transmisyjnej mikroskopii elektronowej.
Year 2020
-
Copolymerization of Styrene and Pentadecylphenylmethacrylate (PDPMA): Synthesis, Characterization, Thermomechanical and Adhesion Properties
Publication -
Copolymerization of Styrene and Pentadecylphenylmethacrylate (PDPMA): Synthesis, Characterization, Thermomechanical and Adhesion Properties
PublicationThe copolymerization of styrene (St) with a bioderived monomer, pentadecylphenylmethacrylate (PDPMA), via atom transfer radical polymerization (ATRP) was studied in this work.The copolymerization reactivity ratio was calculated using the composition data obtained from1HNMR spectroscopy, applying Kelen-Tudos and Finemann-Ross methods. The reactivity ratio of styrene (r1=0.93) and PDPMA (r2=0.05) suggested random copolymerization...
-
Fabrication of exfoliated graphite reinforced silicone rubber composites - Mechanical, tribological and dielectric properties
PublicationThe effect of exfoliated graphite (EG) on the mechanical, tribological and dielectric properties of the silicone rubber (QM) composites has been systematically investigated and analysed. Morphological analysis of the composites helps to understand the interfacial interaction between the filler and the rubber matrix as well as wear mechanism respectively. An enhancement in the mechanical, tribological and dielectric properties was...
-
Fabrication of exfoliated graphite reinforced silicone rubber composites - Mechanical, tribological and dielectric properties
PublicationThe effect of exfoliated graphite (EG) on the mechanical, tribological and dielectric properties of the silicone rubber (QM) composites has been systematically investigated and analysed. Morphological analysis of the composites helps to understand the interfacial interaction between the filler and the rubber matrix as well as wear mechanism respectively. An enhancement in the mechanical, tribological and dielectric properties was...
-
Investigating the Impact of Curing System on Structure-Property Relationship of Natural Rubber Modified with Brewery By-Product and Ground Tire Rubber
Publication -
Investigating the Impact of Curing System on Structure-Property Relationship of Natural Rubber Modified with Brewery By-Product and Ground Tire Rubber
PublicationThe application of wastes as a filler/reinforcement phase in polymers is a new strategy to modify the performance properties and reduce the price of biocomposites. The use of these fillers, coming from agricultural waste (cellulose/lignocellulose-based fillers) and waste rubbers, constitutes a method for the management of post-consumer waste. In this paper, highly-filled biocomposites based on natural rubber (NR) and ground tire...
-
Kinetics of Cross-Linking Reaction of Epoxy Resin with Hydroxyapatite-Functionalized Layered Double Hydroxides
PublicationThe cure kinetics analysis of thermoset polymer composites gives useful information about their properties. In this work, two types of layered double hydroxide (LDH) consisting of Mg2+ and Zn2+ as divalent metal ions and CO32− as an anion intercalating agent were synthesized and functionalized with hydroxyapatite (HA) to make a potential thermal resistant nanocomposite. The curing potential of the synthesized nanoplatelets in the...
-
Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins
Publication -
Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins
PublicationLiquefaction of wood-based biomass gives different polyol properties depending on the reagents used. In this article, alder wood sawdust was liquefied with glycerol and poly(ethylene glycol) solvents. Liquefaction reactions were carried out at temperatures of 120, 150 and 170 °C. The obtained bio-polyols were analyzed in order to establish the process efficiency, hydroxyl number, acid value, viscosity and structural characteristics...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
Publication -
Modification of Ground Tire Rubber—Promising Approach for Development of Green Composites
PublicationGround tire rubber (GTR) was mechano-chemically modified using a road bitumen 100/150 and two types of organic peroxides: di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB) and dicumyl peroxide (DCP). The impact of used additives on reactive sintering efficiency and physico-mechanical properties of modified GTR was investigated using oscillating disc rheometer measurements, followed by tensile tests and swelling behavior studies....
-
Natural carbon-based quantum dots and their applications in drug delivery: A review
PublicationNatural carbon based quantum dots (NCDs) are an emerging class of nanomaterials in the carbon family. NCDs have gained immense acclamation among researchers because of their abundance, eco-friendly nature, aqueous solubility, the diverse functionality and biocompatibility when compared to other conventional carbon quantum dots (CDs).The presence of different functional groups on the surface of NCDs such as thiol, carboxyl, hydroxyl,...
-
Natural carbon-based quantum dots and their applications in drug delivery: A review
Publication -
Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies
Publication -
Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies
PublicationPoly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) blends were compatibilized by reactive blending and by copolymers formed during reaction in the solution. The reactive blending of PCL/PLA was performed using di-(2-tert-butyl-peroxyisopropyl)benzene (BIB) or dicumyl peroxide (DCP) as radical initiator. PCL-g-PLA copolymers were prepared using 1.0 wt. % of DCP or BIB via reaction in solution, which was investigated through...
Year 2017
-
CROSSLINKING OF EPOXY-OLIGOESTERIC MIXTURES IN THE PRESENCE OF DIOXYDIPHENYLPROPANE DIGLYCIDYL ETHER MODIFIED WITH ADIPIC ACID
Publication -
In-Situ Processing of Biocomposites via Reactive Extrusion
PublicationLaw regulations, economic and environmental factors are the main causes for the rapidly growing interests in biocomposites’ research, conducted currently in a number of academic and industrial scientific centers. However, weak polymer matrix/filler interactions, common in biocomposites, result in unsatisfactory mechanical properties, which limit their practical applications. From many attempts performed to solve this problem, in-situ...
-
Liquefaction of macroalgae Enteromorpha biomass for the preparation of biopolyols by using crude glycerol
PublicationThis article describes the liquefaction process of macroalgae Enteromorpha with the use of crude glycerol as a solvent and a reagent, aimed at obtaining of new bio-polyols, which are characterized with respect to their chemical structure, physical and thermal properties. Six different biopolyols were prepared. In order to optimize the liquefaction of algal biomass for the best bio-polyol properties, two catalysts (sulfuric or orthophosphoric...
-
Performance properties of rigid polyurethane-polyisocyanurate/brewers’ spent grain foamed composites as function of isocyanate index
PublicationIn the presented work, rigid polyurethane-polyisocyanurate (PUR-PIR) foams filled with brewers’ spent grain (BSG) were prepared. The influence of the isocyanate index (II) on its performance was investigated. Foams obtained with higher isocyanate index required a higher amount of hydrofluorocarbon physical blowing agent to provide the same apparent density of material. An increase of isocyanate index resulted in a slight decrease...
Year 2011
-
Dewulkanizacja ciągła rozdrobnionych odpadów gumowych
PublicationPrzedstawiono przegląd literaturowy postępu naukowego i technologicznego w zakresie dewulkanizacji ciągłej odpadów gumowych, która umożliwia redukcję kosztów produkcji oraz ułatwia wytwarzanie regeneratów gumowych w skali przemysłowej. Ponadto zaprezentowane zostały wstępne wyniki badania parametrów dewulkanizacji termomechanicznej rozdrobnionych odpadów gumowych prowadzonej przy użyciu wytłaczarki dwuślimakowej...
-
Influence of Glycols on the Glycolysis Process and the Structure and Properties of Polyurethane Elastomers
PublicationW pracy omówiono wyniki badań elastomerów wytworzonych z glikolizatów poddanych dezaminacji. Glikolizaty otrzymywano w procesie transestryfikacji polieterouretanów glikolami: propano-1,3-diolem, pentano-1,5-diolem oraz heksano-1,6-diolem. Procesy prowadzono przy trzech stosunkach masowych pianki:glikolu.
-
Modyfikacja chemiczna epoksydowanego oleju sojowego i właściwości reologiczne produktów
PublicationW pracy przedstawiono proces modyfikacji epoksydowanego oleju sojowego (EOS) poprzez hydroksylację wiązań epoksydowych przy użyciu glikolu etylenowego w obecności katalizatora kwasowego. Omówione zostały właściwości fizykochemiczne, relogiczne oraz budowa chemiczna hydroksylowanego oleju sojowego (HOS)
-
Optymalizacja dewulkanizacji ciągłej rozdrobnionych odpadów gumowych
PublicationDynamiczny rozwój przemysłu motoryzacyjnego, przyczynił się do powstania ogromnej ilości odpadów gumowych, z których aż 80% stanowią zużyte opony samochodowe. Wydanie aktów praw-nych nakładających na producentów obowiązku zagospodarowania zużytych opon z jednoczesnym zakazem ich składowania, sprawiło iż recykling materiałowy odpadów gumowych nabiera obecnie coraz większego znaczenia, stanowiąc alternatywę dla powszechnie stosowanego...
-
Otrzymywanie i właściwości fizyko-mechaniczne sztywnych pianek poliuretanowo-poliglicerynowych
PublicationPrzedmiotem badań były sztywne pianki poliuretanowo-poliglicerynowe otrzymane z poligliceryny, użytej jako nowy substytut petrochemicznego poliolu. Sztywne pianki otrzymano metodą jednoetapową przy stosunku grup NCO do OH wynoszącym 2:1. Udział poligliceryny Pole w układach wynosił 35 oraz 70% mas. gramorównoważników poliolu petrochemicznego Rokopolu RF 551. Otrzymane układy scharakteryzowano pod kątem właściwości mechanicznych...
-
Physical and mechanical properties of rigid polyurethane faoms modified with selected flame retardants or layered silicates
PublicationW pracy przedstawiono charakterystykę pianek poliuretanowych zawierających klasyczne środki uniepalniające oraz nanonapełniacze z grupy glinokrzemianów warstwowych. Zbadano wpływ zarówno nanonapełniaczy na bazie naturalnego montmorylonitu, jak i modyfikowanych glinokrzemianów. Uzyskane spienione poliuretanowe o zmniejszonej palności charakteryzowano z wykorzystaniem różnych technik badawczych, między innymi wykonano badania DMA,...
Year 2022
-
Divulging the anti-acetylcholinesterase activity of Colletotrichum lentis strain KU1 extract as sustainable AChE active site inhibitors
PublicationAlzheimer’s disease (AD), also called senile dementia is a neurodegenerative disease seen commonly in the elderly and is characterised by the formation of β-amyloid plaques and neurofbrillary tangles (NFT). Though a complete understanding of the disease is lacking, recent studies showed the role of the enzyme acetylcholinesterase (AChE) in pathogenesis. Finding new lead compounds from natural sources has always been a quest for...
-
Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment
PublicationIn this paper, low-temperature extrusion of ground tire rubber was performed as a proecological waste tires recycling method. During this process, ground tire rubber was modified with constant content of dicumyl peroxide and a variable amount of elastomer (in the range: 2.5–15 phr). During the studies, three types of elastomers were used: styrene-butadiene rubber, styreneethylene/butylene-styrene grafted with maleic anhydride and...
-
Mission impossible for cellular internalization: When porphyrin alliance with UiO-66-NH2 MOF gives the cell lines a ride
PublicationIs it possible to accelerate cell internalization by hybridization of nanomaterials? Herein we support the realization of using metal-organic frameworks (MOFs) with the assistance of rigid porphyrin structure (H2TMP) aimed at drug loading, drug release, relative cell viability, and targeted in vitro drug delivery. There are several MOFs, i.e., UiO-66-NH2 (125 ± 12.5 nm), UiO-66-NH2 @H2TMP (160 ± 14 nm), UiO-66-NH2 @H2TMP@DOX, and...
Year 2003
-
DSC study of polyurethanes obtained from 4,4´bis(10-hydroxydecaoxy) biphenyl.
PublicationW naszych badaniach nad poliuretanami segmentowymi i sztywno segmentowymi, otrzymanymi z 4,4`-bis(6-hydroksyheksyloksy)bifenylu (BHHBP), diizocyjanianu4,4`-dicykloheksylometanu (HMDI) i oligo(adypinianu 1,6-heksylenu) stwierdziliśmy, że poliuretany otrzymane z HMDI o składzie 16% trans, trans-, 52%cis, trans- i 32% cis, cis-HMDI charakteryzują się znacznie niższymi temperaturami przejść fazowych, niż te otrzymane z frakcji...
-
DSC Study of Polyurethanes obtained from 4,4'-Bis(10-Hydroxydecaoxy)biphenyl
Publication -
Polystyrene/polybutadiene blends: an analysis of the phase inversion regionand cophase continuity and a comparison with theoretical predictions.
PublicationMieszaniny przygotowano przez mieszanie w stopie. Występowanie jednego lubobu polimerów w postaci fazy ciągłej stwierdzano przez badanie morfologii przy pomocy skaningowego mikroskopu elektronowego i przez rozpuszczanie jednego ze składników mieszaniny. Badania morfologii mieszanin wykazały, że polistyren występował w postaci globul przy jego zawartości do 30%. Przy zawartości od 40% do 60% obserwowano fazy ciągłe obu...
-
Polystyrene/polybutadiene blends: An analysis of the phase-inversion region and cophase continuity and a comparison with theoretical predictions
Publication -
Polystyrene/polybutadiene blends: An analysis of the phase-inversion region and cophase continuity and a comparison with theoretical predictions
Publication
Year 1995
-
Dynamic mechanical thermal analysis of polyamide 6/thermoplastic polyurethane blends
Publication -
Glass transition temperatures of polyurethane-urea elastomers based on N, N′-ethylenethiourea and N, N′-ethyleneurea as chain extenders
Publication
Year 2023
-
Green Approaches in Rubber Recycling Technologies: Present Status and Future Perspective
PublicationAs a consequence of massive production and consumption of rubbers, rubber blends, and rubber composites for myriad applications, elastomeric products have enormously accumulated and become an environmental threat. The disposal and burning of rubber wastes have been banned because of environmental and economic reasons. By contrast, a great deal of attention has been directed toward strategies enabling recycling and reuse of rubbers....
-
Mitigating metal-organic framework (MOF) toxicity for biomedical applications
PublicationMetal-organic frameworks (MOFs) are a novel class of crystalline porous materials, consisting of metal ions and organic linkers. These hybrid materials are highly porous and have a large specific surface area, making them of great interest for applications in gas separation, energy storage, biomedical imaging, and drug delivery. As MOFs are being explored for biomedical applications, it is essential to comprehensively assess their...
Year 1997
Year 1998
seen 4873 times