Search
Filters
total: 2249
filtered: 1876
displaying 1000 best results Help
Search results for: SOLAR H2 PRODUCTION
-
Hydrogen production from wood waste by mean of dark fermentation
PublicationThe utilization of wood wastes in clean and green chemistry method like by mean of dark fermentation, is a highly desired solution of waste management. In the article model for the estimation hydrogen potential of wood waste is given. The model has been used to calculate the potential theoretical hydrogen mass that can be produced from wood wastes in Pomerania and Silesia: pine, spruce, fir, beech and oak. In the introduction,...
-
Flexible dye-sensitized solar cells based on Ti/TiO2 nanotubes photoanode and Pt-free and TCO-free counter electrode system
PublicationFlexible dye-sensitized solar cells (DSSCs) are getting more attention compared to standard glass covered DSSCs due to their unique commercial applications (e.g. tents or sail surfaces) and the possibility of rolling up into a small, portable device. In this work, titania nanotubes (TiO2 NT) modified with titania nanoparticles (TiO2 NP) were photoelectrochemically characterized as an anode for flexible dye-sensitized solar cells....
-
Effect of Individual Components of Lignocellulosic Biomass on Methane Production and Methanogen Community Structure
PublicationOne of the major factors that influences the economic feasibility of biogas production is the availability of digestible feedstocks. There is little research on the influence of the chemical composition of biomass on biogas synthesis, especially with regard to the content of lignocellulosic materials. Therefore, the aim of this study was to estimate how differences in the content of cellulose and lignin in lignocellulosic biomass...
-
Perceptual and Motor Effects of Muscle Co-activation in a Force Production Task
PublicationWe tested several predictions of the theory of motor control with spatial referent coordinates related to effects of muscle coactivation on force production and perception. In particular, we predicted that subjects would produce unintentional force increase by finger flexors and be unaware of this force increase. Healthy subjects performed steady force production task in isometric conditions with visual feedback on the force level....
-
Single Cell Expression Systems for the Production of Recombinant Proteins for Immunodiagnosis and Immunoprophylaxis of Toxoplasmosis
PublicationToxoplasmosis represents a significant public health and veterinary concern due to its widespread distribution, zoonotic transmission, and potential for severe health impacts in susceptible individuals and animal populations. The ability to design and produce recombinant proteins with precise antigenic properties is fundamental, as they serve as tools for accurate disease detection and effective immunization strategies, contributing...
-
Pre-Treatment of Furniture Waste for Smokeless Charcoal Production
PublicationThe aim of this study was to assess the possibility of using furniture waste for smokeless fuel production using the pyrolysis process. Four types of wood-based wastes were used in the pyrolysis process: pine sawdust (PS), chipboard (CB), medium-density fiberboard (MDF), and oriented strand board (OSB). Additionally, the slow and fast types of pyrolysis were compared, where the heating rates were 15 C/min and 100 C/min, respectively....
-
Activity of Patents in Fuel Cells and Hydrogen Production in the Context of Passenger Car Fleet in the V4 Countries
PublicationThe hydrogen market in the world today is capable ovule and em-pirical evidence on activity of patents in fuel cells and hydrogen production islimited so far. Patent applications in zero-emission mobility in the aspect of fuelcells include: DAFC/DMFC&DMFC, PEMFC, SOFC, AFC, PAFC. As for thepatents relating to the hydrogen production, they concern low carbon, electrol-ysis and inorganic. The purpose of the study was to investigate...
-
Wage response to global production links: evidence for workers from 28 European countries (2005–2014)
PublicationUsing rich individual-level data on workers from 28 European countries, this study provides the first so extensive cross-country assessment of wage response to global production links within GVC in the period 2005–2014. Unlike the other studies, the authors (i) address the importance of backward linkages in globally integrated production structures (capturing imports of goods and services needed in any stage of the production of...
-
Graphitic carbon nitride nanosheets decorated with HAp@Bi2S3 core–shell nanorods: Dual S-scheme 1D/2D heterojunction for environmental and hydrogen production solutions
PublicationBy combining different semiconductors, scientists have developed innovative materials capable of converting solar energy into useful forms of energy or driving chemical reactions that clean up pollutants. These materials offer a promising path to combat global environmental and energy challenges. In this study, HAp@Bi2S3 core–shell structures were synthesized using a facile microemulsion technique, and then loaded onto graphitic...
-
A review on homogeneous and heterogeneous catalytic microalgal lipid extraction and transesterification for biofuel production
PublicationExtracting lipids from microalgal biomass presents significant potential as a cost-effective approach for clean energy generation. This can be achieved through the chemical conversion of lipids to produce fatty acid methyl esters via transesterification. The extraction mainly involves free fatty acids, phospholipids, and triglycerides, and requires less energy, making it an attractive option for satisfying the growing demand for...
-
Treatment innovation using solar/UV In book: The Treatment of Pharmaceutical Wastewater: Innovative Technologies and the Adaptation of Treatment Systems
PublicationSince ancient times, sunlight irradiation has been widely used for water purification. Apart from solar water disinfection techniques, UV irradiation is of particular interest when considering the photodegradation of various classes of emerging pollutants. Pharmaceutically active compounds are one of the largest classes of micropollutants. The main sources of these contaminants in wastewater and aqueous environments are households,...
-
The project of pull system for storehouse and production line in a company provides electronics
PublicationThe chapter below presents how to reduced delivery of the material to production by using a "Kanban schedule board" and related tools from 48 hours and 59 minutes to 41 minutes in a company provides electronics. The solution was found through analysis of the current way of supplying stands and using Just In Time idea, the reduction of ''muda''. To solve the problem was used Kanban card", which has the shape of two triangles joined...
-
Synthesis, characterization, and application of 2D/2D TiO2-GO-ZnFe2O4 obtained by the fluorine-free lyophilization method for solar light-driven photocatalytic degradation of ibuprofen
PublicationIn this study, we report the potential of 2D/2D TiO2- GO-ZnFe2O4 photocatalyst obtained using the fluorine-free lyophilization technique for the degradation of ibuprofen belonging to the group of active pharmaceutical ingredients (API). The improved ibuprofen degradation under simulated solar light was achieved in the presence of a composite of 2D TiO2 combined with GO and embedded ZnFe2O4, which additionally provides superparamagnetic...
-
Fuzzy logic and production planning.
PublicationReferat prezentuje efektywność logiki rozmytej w projektowaniu procesów produkcyjnych. Przedstawiono algorytm i przesłanki zastosowania logiki rozmytej opartej o informacje eksperckie.
-
Comparison of bacterial production in the water column between two Arctic fjords, Hornsund and Kongsfjorden (West Spitsbergen)
PublicationBacterial production and the accompanying environmental factors were measured in the water columns of two Arctic fjords during the cruise in July and August 2013. Water samples were collected at six stations located in the central part of Hornsund and Kongsfjorden. In Hornsund, where average water temperatures were 1.25-fold lower than in Kongsfjorden, the bacterial production was twice as high (0.116 ± 0.102 vs 0.05 ± 0.03 mg...
-
BIOGAS PRODUCTION FROM BAKERY WASTES -DYNAMICS, RETENTION TIME AND BIOGAS POTENTIAL
PublicationThis paper presents results of bakery-waste methane-fermentation. The scope of the study covers the determination of basic physicochemical parameters, process dynamics and retention time as well as biogas composition and biogas efficiency. Methane fermentation process was carried out in accordance with German Standard DIN 38414 S8 and under condition of 38°C. Conclusion: bakery wastes have big potential for biogas production.
-
The importance of anchoring ligands of binuclear sensitizers on electron transfer processes and photovoltaic action in dye-sensitized solar cells
PublicationThe relatively low photon-to-current conversion efficiency of dye-sensitized solar cells is their major drawback limiting widespread application. Light harvesting, followed by a series of electron transfer processes, is the critical step in photocurrent generation. An in-depth understanding and fine optimization of those processes are crucial to enhance cell performance. In this work, we synthesize two new bi-ruthenium sensitizers...
-
Particulate Matter Production of Small Heat Source Depending on the Bark Content in Wood Pellets
PublicationWood pellets as biofuel are more and more used in small heat sources in Europe. Standard wood pellets are produced from wood sawdust without bark. The paper deals about the impact of bark in wood pellets on their properties and combustion process. Special attention in this work is paid to production of particulate matter during combustion of wood pellets depending on bark content. There were experimentally produced spruce wood...
-
The overview of reactors used for the production of precipitated calcium carbonate via carbonation route
PublicationCarbonation is one of the methods for the production of precipitated calcium carbonate (PCC) on the industrial scale. A gaseous CO2 is used as a reagent in this process. The hydrodynamic conditions gener-ated in the reactor affect the course of the process and the characteristics of the precipitated calcium carbonate particles. This paper discusses the construction of standard reactors and new proposed con-struction used for the...
-
Synthesis of Titanium Dioxide via Surfactant-Assisted Microwave Method for Photocatalytic and Dye-Sensitized Solar Cells Applications
PublicationIn this study, titania nanoparticles were obtained using the microwave-assisted technique. Moreover, different surfactants (PEG (Mn = 400), Pluronic P123 and Triton X−100) were used during the synthesis in order to determine their impact on the crystallinity and morphology of the final products. Subsequently, techniques such as XRD, SEM and TEM (performed in high contrast and high-resolution mode), diffuse reflectance spectroscopy...
-
Investigation of the outdoor illuminated and air-cooled silicon solar cell
PublicationPrzedstawiono metodę wyznaczania współczynnika nieidealności ogniwa słonecznego w oparciu o zmiany napięcia otwartego obwodu w funkcji nasłonecznienia. Zastosowano chłodzenie ogniwa przy użyciu radiatora i strumienia powietrza celem utrzymania jego temperatury na stałym poziomie podczas eksperymentu. Omówiono wpływ nasłonecznienia i temperatury ogniwa na kształt charakterystyki i położenie punktu maksymalnej mocy.
-
Impact of TiO2 Nanostructures on Dye-Sensitized Solar Cells Performance
Publication -
Hydrogen evolution on the reduced TiO2 under simulated solar lamp
Publication -
Solar Photocatalytic Degradation of Sulfamethoxazole by TiO2 Modified with Noble Metals
Publication -
Experimental investigations of solar driven ejector air-conditioning system
Publication -
Sol-gel Al2O3 antireflection coatings for silicon solar cells
PublicationPurpose: This paper presents the results of investigations on morphology and opticalproperties of the prepared aluminium oxide thin filmsDesign/methodology/approach: Thin films were prepared with use of sol-gel spincoating method. The changes of surface morphology were observed in topographic picturesperformed with the atomic force microscope AFM. Obtained roughness coefficients valueswere generated...
-
Photoinduced Operation by Absorption of the Chalcogenide Nanocrystallite Containing Solar Cells
Publication -
Thermal performance of Si and GaAs based solar cells and modules.
PublicationPraca przedstawia aktualny stan wiedzy na temat wpływu temperatury na parametry pracy ogniw i modułów fotowoltaicznych z amorficznego krzemu i GaAs. Przedstawiono ogólna analizę rezultatów zastosowania modułów fotowoltaicznych w budownictwie ze szczególnym uwzględnieniem systemów hybrydowych, przekształcających energie słoneczną w prąd elektryczny i ciepło.
-
The effect of temperature on the power drop in crystalline silicon solar cells
PublicationPrzedstawiono wpływ temperatury i długości fali zaabsorbowanego promieniowania na parametry elektryczne krzemowych ogniw i modułów fotowoltaicznych. Zaobserwowano spadek mocy wyjściowej (-0.65%/K), współczynnika wypełnienia charakterystyki FF (-0.2%/K) i sprawności konwersji (-0.08%/K) ze wzrostem temperatury. Zaprezentowano również charakterystykę spektralną napięcia otwartego obwodu dla ogniw krzemowych.
-
Annual variations in the solar energy conversion efficiency in will coppice stand.
PublicationMonitorowano produkcyjność plantacji wiklinowych w Uppsali w Szwecji w latach 1985-1994. Okazało się, że największa sprawność przetwarzania energii słonecznej w biomasę ma miejsce w drugim i trzecim roku uprawy wiklinowej (około 1%), natomiast w pierwszym i w czwartym roku sprawność ta jest 2 razy niższa i wynosi około 0,5%. Dyskutuje się przyczyny takiej sytuacji.
-
Dark current characteristics of single crystalline silicon solar cells.
PublicationW pracy przedstawiono wpływ szkodliwych rezystancji na parametry pracy krzemowych ogniw fotowoltaicznych. W tym celu wyznaczono ciemne charakterystyki prądowo-napięciowe. W celu opisu własności elektrycznych ogniw zastosowano model jedno- i dwu-diodowy. Wyznaczono współczynniki nieidealności charakterystyki i rezystancję szeregową w całym zakresie temperatur pracy ogniw fotowoltaicznych dla zastosowań naziemnych. Wyznaczona za...
-
Development of advanced machine learning for prognostic analysis of drying parameters for banana slices using indirect solar dryer
PublicationIn this study, eXtreme Gradient Boosting (XGBoost) and Light Gradient Boosting (LightGBM) algorithms were used to model-predict the drying characteristics of banana slices with an indirect solar drier. The relationships between independent variables (temperature, moisture, product type, water flow rate, and mass of product) and dependent variables (energy consumption and size reduction) were established. For energy consumption,...
-
Investigating BiMeVOx compounds as potential photoelectrochemical and electrochemical materials for renewable hydrogen production
PublicationIn this study, BiMeVOx compounds (where Me: Co, Mo, Ce, Zr) were synthesized and characterized as potential photoelectrochemical materials for solar water splitting, the hydrogen evolution reaction (HER), and oxygen evolution reaction (OER). The analysis confirmed the successful formation of phase BiMeVOx compounds with the desired crystal structure. Among the tested materials, BiCoVOx(800) showed the highest photocurrent density...
-
HYDROGEN PRODUCTION PERFORMANCE IN THERMOCATALYTIC REACTOR BASED ON THE INTERMETALLIC PHASE OF NI3AL
PublicationThe main aim of the following paper is mathematical modelling for momentum, heat and mass transfer, which is accompanied by chemical surface reactions of the flow of the mixture helium and methanol. The thermocatalytic devices used for decomposition of hydrocarbons incorporate vertical microchannels coupling at the ends and heated to 500 oC at the walls. The results of the experiment were compared with CFD calculations to calibrate...
-
Ammonia amendment promotes high rate lactate production and recovery from semi-continuous food waste fermentation
PublicationIn this study, a reliable approach using ammonia nitrogen was proposed to increase lactate production during semi-continuous food waste (FW) fermentation under mesophilic conditions. Both free ammonia nitrogen (FAN) and ammonium ion (NH4+-N) were present in mesophilic reactors, with a wide FAN/NH4+-N ratio variation due to the intermittent pH control. The investigation of responsible mechanisms revealed that the increased production...
-
Small-lot Production with Additive Production Using Reverse Logistics and IT Solutions in COVID-19 Era
Publication -
A Review on Metal–Organic Framework as a Promising Catalyst for Biodiesel Production ENERGY & FUELS
PublicationThe rapid depletion of fossil-derived fuels along with rising environmental pollution have motivated academics and manufacturers to pursue more environmentally friendly and sustainable energy options in today’s globe. Biodiesel has developed as an ecologically favorable alternative. However, the mass manufacturing of biodiesel on an industrial scale confronts substantial cost and pricing challenges. To address this issue, high-efficiency...
-
Elicited Production of Essential Oil with Immunomodulatory Activity in Salvia apiana Microshoot Culture
PublicationSalvia apiana Jepson is an endemic North American species characterized by a rich phytochemical profile including abietane-type diterpenoids, phenolic acids, flavonoids, and thujone-free essential oil (EO). The current study was aimed at increasing EO production in bioreactor-grown S. apiana microshoot culture through biotic elicitation using chitosan, ergosterol, and yeast extract (YE). Additionally, the immunomodulatory effects...
-
Utilization of rapeseed pellet from fatty acid methyl esters production as an energy source
PublicationRapeseed pellet – crushed seed residue from oil extraction is a by-product of fatty acid methyl esters production process. As other types of biomass, it can either be burned directly in furnaces or processed to increase its energetic value. Biomass is renewable, abundant and has domestic usage; the sources of biomass can help the world reduce its dependence on petroleum products, fossil coal and natural gas. Energetically effective...
-
The Influence of Co-Fermentation of Agri-Food Waste with Primary Sludge on Biogas Production and Composition of the Liquid Fraction of Digestate
PublicationEnergy self-sufficiency is a current trend in wastewater treatment plants. This effect can be achieved by increasing the production of electricity from biogas and by reducing energy consumption for technological processes. One idea, in line with the circular economy concept, is the use of waste rich in organic matter as co-substrates for the fermentation process. The aim of this study was to determine the effect of waste co-fermentation...
-
Production of six-degrees-of-freedom (6DoF) navigable audio using 30 Ambisonic microphones
PublicationThis paper describes a method for planning, recording, and post-production of six-degrees-of-freedom audio recorded with multiple 3rd order Ambisonic microphone arrays. The description is based on the example of recordings conducted in August 2020 with the Poznan Philharmonic Orchestra using 30 units of Zylia ZM-1S. A convenient way to prepare and organize such a big project is proposed – this involves details of stage planning,...
-
The innovative exploitation of Brassica vegetables in the health quality food production chain
PublicationIn this overview the multidirectional opportunities of innovative exploitation of chemical and biological properties of vegetables from Brassiceae family are discussed. The specific chemical composition of brassicas, as regard both nutrients and non-nutrients, renders them particularly suitable for the health food production chain, literally from field to fork. the ability of these plants to accumulate heavy metals may be utilised...
-
The innovative Exploitation of Brassica Vegetables in the Health Quality Food Production Chain
PublicationIn this overview the multidirectional opportunities of innovative exploitation of chemical and biological properties of vegetables from Brassiceae family are discussed. The specific chemical composition of brassicas, as regard both nutrients and non-nutrients, renders them particularly suitable for the health food production chain, literally from field to fork. the ability of these plants to accumulate heavy metals may be utilised...
-
Theoretical designing of selenium heterocyclic non-fullerene acceptors with enhanced power conversion efficiency for organic solar cells: a DFT/TD-DFT-based prediction and understanding
PublicationIn this study, we have designed and explored a new series of non-fullerene acceptors for possible applications in organic solar cells. We have designed four molecules named as APH1 to APH4 after end-capped modification of recently synthesized Y6-Se-4Cl molecule. Density functional theory and time dependent-density functional theory have been employed for computing geometric and photovoltaic parameters of the designed molecules....
-
Nanoparticles preparation using microemulsion systems
PublicationMetallic nanoparticles become of current interests because they exhibit unique properties compared with those of metal atoms or bulk metal due to the quantum size effect and their large surface area, which make them attractive for applications in optics, electronics, catalysis biology and medicine. TiO2 has been used for environmental remediation purposes such as in the purification of water and air and also solar-to chemical energy...
-
Recent advances in hydrogen production from biomass waste with a focus on pyrolysis and gasification
PublicationThis paper presents the results research on the optimal fuel compositions and the control parameters of the spark ignition engine fueled with syngas-biogas-hydrogen for the purpose of setting up a flexible electronic control unit for the engine working in a solar-biomass hybrid renewable energy system. In syngas-biogas-hydrogen mixture, the optimal content of hydrogen and biogas is 20% and 30%, respectively. Exceeding these thresholds,...
-
Tacit knowledge awareness and sharing as a focal part of knowledge production, Polish-US view on IT, healthcare, and construction industry
PublicationIn the knowledge economy era, knowledge production and dissemination are of key interest to individuals, organizations, and economies. Tacit knowledge results from experience, leading to innovation. The learning culture can facilitate the transformation of errors into experiences. This study explores whether mistake acceptance facilitates tacit knowledge awareness and sharing in the information technology, healthcare, and construction...
-
Magnetically recyclable TiO2/MXene/MnFe2O4 photocatalyst for enhanced peroxymonosulphate-assisted photocatalytic degradation of carbamazepine and ibuprofen under simulated solar light
PublicationIn this study, a novel TiO2/Ti3C2/MnFe2O4 magnetic photocatalyst with dual properties, enabling (i) improved photocatalytic degradation with PMS activation under simulated solar light and (ii) magnetic separation after the degradation process in an external magnetic field was developed and applied for the efficient photodegradation pharmaceutically active compounds (PhACs) frequently present in wastewater and surface waters worldwide. MXene...
-
Effect of operating conditions on N 2 O production in an anammox sequencing batch reactor containing granular sludge
PublicationNitrous oxide (N2O) is one of the gases with the greatest impact in the atmosphere due to its persistence and significant contribution to the greenhouse effect. This study provides an insight into the dynamics of N2O production in wastewater nitrogen removal systems. A 10 L sequencing batch reactor containing enriched anammox biomass was subjected to different operational conditions, i.e., temperature, feed time, NO2 /NH4 þ ratio...
-
Authentication of whisky due to its botanical origin and way of production by instrumental analysis and multivariate classification methods
PublicationHeadspacemass-spectrometry (HS-MS), mid infrared (MIR) and UV–vis spectroscopywere used to authenticate whisky samples from different origins and ways of production ((Irish, Spanish, Bourbon, TennesseeWhisky and Scotch). The collected spectra were processed with partial least-squares discriminant analysis (PLS-DA) to build the classification models. In all cases the five groups ofwhiskieswere distinguished, but the best resultswere...