Filters
total: 472
Search results for: FE ANALYSIS
-
Processing and properties of Al-Si-Fe-Cr in situ composites
PublicationPraca jest kontynuacją badań nad wytwarzaniem tanich kompozytów in situ o osnowie stopu Al-Si wzmocnionego związkami międzymetalicznymi Al-Fe-Si lub Al-Fe-Cr-Si, otrzymanych poprzez reakcję ciekłego stopu Al (Al-Si11, Al-Si25) z proszkiem Fe lub Cr. Żelazo zostało wybrane ze względu na niską cenę, niską temperaturę wytwarzania, wysoką reaktywność z Al i heksagonalną sieć krystalograficzną związku Al-Fe-Si, co sprzyja tworzeniu...
-
Buckling Analysis of Cold Formed Silo Column
PublicationThe paper is devoted to stability analysis of different models of steel cold formed silo column. The steel cylindrical silos are often composed of corrugated walls and vertical open-sectional columns uniformly placed along the silo circumference. Both the whole 3D silo, a simplified model consisting of one column with a part of the silo walls, and a single column resting on elastic foundation provided by the silo walls were analyzed....
-
FTIR Studies of the Surface of TiO2, Fe-TiO2 and Fe-C-TiO2 Photocatalysts in Phenol Oxidation Via the Photo-Fenton Process
Publication -
WITHDRAWN: The kinetics of phenol decomposition under UV irradiation with and without H2O2 on TiO2, Fe-TiO2 and Fe-C-TiO2 photocatalysts
Publication -
Spatial and vertical distribution analysis of heavy metals in urban retention tanks sediments: a case study of Strzyza Stream
PublicationConcentrations of seven heavy metals (HMs): Zn, Cu, Pb, Cd, Ni, Cr, and Fe in core samples of bottom sediments from four retention tanks (RTs) located along the Strzyza Stream in northern Poland (Gdansk) were measured to obtain a general view of sediment quality. The recognition of contamination and potential environmental impacts is the main aim of this paper. A total of 96 sediment samples were collected from eight sampling sites...
-
Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014
PublicationSince offshore wind turbine supporting structures are subjected to dynamic environments with time-varying loading conditions, it is important to model their dynamic behavior and validate these models by means of vibrational experiments. In this paper assessment of dynamical state of the structure is investigated by means of both: numerical modeling, and experimental modal analysis. In experimental modal analysis, capturing the...
-
Charakterystyka kawitacyjna laserowo obrabianych napoin Fe-Cr-Mn
PublicationPrzedstawiono badania odporności kawitacyjnej napoin Fe-Cr-Mn w dwóch przypadkach: bez dodatkowej obróbki powierzchniowej oraz po przetapianiu powierzchni napoiny wiązką lasera CO2 o mocy 1000W. Oceniano głębokość i stopień umocnienia warstwy wierzchniej.
-
Właściwości kompozytów Al-Si-Fe-Cu otrzymanych in situ
PublicationPrzeprowadzono badania wybranych właściwości kompozytów o osnowie Al-Si z wydzieleniami fazy AlSi4Fe utworzonej in situ przez mieszanie proszków Fe i Cu z ciekłym stopem Al. Zbadano zachowanie materiału przy ściskaniu, twardość oraz zużycie ścierne w warunkach tarcia suchego o płytkę stalową poruszającą się ruchem posuwisto zwrotnym. Przeanalizowano obrazy SEM powierzchni tarcia oraz przekrojów, w celu określenia mechanizmu zużycia...
-
High-conducting Bi4V2-xFexO11-δ ceramics containing Fe2O3 nanocrystals: Structure and properties
PublicationThe topography, structure, thermal, magnetic, and electrical properties of Bi4V2-xFexO11-δ ceramics substituted with x = 0.5 and 0.7 Fe were studied. The microscope analysis showed the presence of iron-rich nanocrystals formed on the Bi-Fe-V-O grains. The X-ray diffraction studies confirmed that grains are built mostly of tetragonal Bi4V1.5Fe0.5O10.5 phase. Thermal properties analysis showed an order-disorder type γ ↔ γʹ phase...
-
Effect of substituting Fe and Ru for Ni on the thermopower ofMgCNi3
Publication -
FE-simulations of a direct wall shear box test.
PublicationW artykule przedstawiono wyniki numerycznej anlizy lokalizacji odkształceń stycznych w materiałach granulowanych podczas bezposredniego ścinania przy ścianie. Obliczenia przeprowadzono z mikropolarnym modelem hipoplastycznym. Obliczenia wykonano w płaskim stanie odkształcenia stosując metodę elementów skończonych. Wyniki numeryczne porównano z wynikami doświadczalnymi.
-
FE-simulations of a direct and a true simple shear test
PublicationPorównano dwa aparaty ścinania: aparat bezpośredniego ścinania i aparat prostego ścinania. Analizy pola naprężeń i odkształceń dokonano stosując metodę elementów skończonych i mikropolarne prawo hypoplastyczne. Analiza ta pokazała, że pole naprężeń i odkształceń jest niejednorodne w obu aparatach, szczególnie w aparacie bezpośredniego ścinania.
-
Imaging of grains and internal stresses in GO Fe-Si alloy with Barkhauseneffects
PublicationBadano próbki stali transformatorowej Fe-Si ze strukturą zorientowaną (GO). Polowy efekt Barkhausena wykorzystano do zobrazowania ziaren pod warstwą ochronną a poziom naprężeń wewnętrznych wyznaczono wykorzystując mechaniczny efekt Barkhausena.
-
Effect of laser heating on cavitation behaviour of Fe-Cr-Mn coating.
PublicationW pracy przedstawiono badania odporności kawiracyjnej napoiny Fe-Cr-Mn po obróbce laserowej polegającej na przetapianiu napoiny wiązką lasera CO2 o mocy 1000W oraz jej nagrzewaniu w stanie stałym. Rezultaty badań wskazują,że po każdym rodzaju obróbki występuje inna podatność obrobionej powierzchni do odkształceń plastycznych pod działaniem obciążeń kawitacyjnych.
-
Periodic Properties of 1D FE Discrete Models in High Frequency Dynamics
PublicationFinite element discrete models of various engineering 1D structures may be considered as structures of certain periodic characteristics. The source of this periodicity comes from the discontinuity of stress/strain field between the elements. This behaviour remains unnoticeable, when low frequency dynamics of these structures is investigated. At high frequency regimes, however, its influence may be strong enough to dominate calculated...
-
Simplified stability analysis of steel cylindrical silos with corrugated walls and vertical columns
PublicationIn the paper a simplified stability analysis of steel cylindrical silos composed of corru¬gated walls and vertical open-sectional columns was proposed. The whole 3D silo was modeled as a single column resting on elastic foundation provided by the silo walls. In proposed formula for the calculation of the foundation stiffness the curvature of the silo walls was taken into account. Three different analyses were carried out using...
-
Fabrication, microstructure and properties of Al-Si -Fe-Cu in situ composites.
PublicationW poszukiwaniu tanich kompozytów na bazie stopów Al powstała koncepcja otrzymywania kompozytów in situ o osnowie stopu Al-Si w reakcji ciekłego stopu Al-Si (Al-Si11, Al-Si25) z proszkiem Fe. Powstałe wydzielenia np. iglastego AlFe4Si w stopie AlSi25 o niezbyt wysokiej twardości (rys.2) stanowią skuteczne wzmocnienie stopu pod względem twardości, sztywności i wytrzymałości na ściskanie jak też obniżonej ścieralności. Jednak znaczny...
-
Impact of plastic deformation on magnetoacoustic properties of Fe-2%Si alloy
PublicationW artykule przedstawiono wyniki komplementarnych badań własności magnetycznych stopu Fe-2%Si po deformacji plastycznej. Badania obejmowały pomiary pętli histerezy magnetycznej B(H), magnetycznego efektu Barkhausena oraz emisjii magnetoakustycznej. Badane próbki poddane były deformacji plastycznej do poziomu sięgajćego 8%. Właściwości pętli histerezy zostały skwantyfikowane z wykorzystaniem pola koercji oraz maksymalnej magnetycznej...
-
Magnetically induced dynamical stability of a Fe monolayer on W(110)
Publication -
FE-simulations of size effects in granular and quasi-brittle materials
PublicationW artykule przedstawiono symulacje efektów skali w materiałach granulowanych i kruchych. Obliczenia wykonano dla ściskania dwuosiowego i fundamentu w przypadku materiałów granulowanych oraz belek zginanych w przypadku materiałów kruchych. Do obliczeń wykorzystano mikropolarne prawo hipoplastyczne i sprężysto-plastyczne prawo z nielokalnym osłabieniem.
-
FE-simulations of direct and simple shearing within a polar hypoplasticity
PublicationW artykule przedstawiono wyniki analizy MES dwóch podstawowych testów w mechanice gruntów, mianowicie testu bezpośredniego ścinania i testu prostego ścinania. Obliczenia wykonano stosując metodę elementów skończonych i mikropolarne hipoplastyczne prawo konstytutywne. Szczególną uwagę zwrócono na wpływ warunków brzegowych na lokalizacje odkształceń.
-
Implementation of non-local integral models into commercial FE methods
PublicationArtykuł omawia implementacje nielokalnych modeli typu całkowego do komercyjnych programów MES. Implementacje pokazano na przykładzie programu Abaqus.
-
Magneto-mechanical properties evolution of Fe-C alloy during precipitation process.
PublicationZbadano pętlę histerezy magnetycznej oraz natężenia mechanicznego i polowego efektu Barkhausena w stopie Fe-C w funkcji czasu wygrzewania izotermicznego w temperaturze 473 K. Wyznaczono rozkłady poziomu naprężeń wewnętrznych oraz straty energii na procesy histerezowe. Wykazano, iż pole koercji Hc jest paraboliczną funkcją średniego poziomu naprężeń sigma-i.
-
Analysis of airborne metal containing particles with EDX/EDS detectorsin electron microscopes
PublicationIn years 2006-2010 particulate matter analysis was undertaken for dust samples collected from Gdansk and London area in orderto compare their morphology and composition. Part of those studies was devoted to analysis of particulate matter (PM) bearingmetals. Characterization of the morphology and size of the particles collected onto the filters was performed using a scanning electronmicroscope (SEM) and transmission electron microscope...
-
Influence of laser beam machining on the cavitation resistance of Fe-Cr-Co clad.
PublicationW pracy przedstawiono wpływ laserowego nagrzewania bezzmiany stanu skupienia i laserowego przetapiania napoin ze stopu Fe-Cr-Co na ich odporność kawitacyjną. Badania kawitacyjne prowadzono na stanowisku z wirującą tarczą. Plastyczne odkształcenia powierzchni określano za pomocą analizy obrazów erodowanych powierzchni. Uzyskane rezultaty wskazują, że laserowo obrabiane powierzchnie miały różną podatność do plastycznego odkształcania...
-
The 3d Ce XPS spectra of Ce0.9M0.1O2
Open Research DataThe dataset consists of 3d Ce XPS of Ce0.9M0.1O2 where (M=Mn, Fe, Co, Ni, Cu). X-ray Photoelectron Spectroscopy analysis (XPS) was performed using X-ray photoelectron spectrometer Omnicron NanoTechnology with 128-channel collector. XPS measurements were undertaken in ultra-high vacuum conditions, below 1.1x10-8 mbar. Photoelectrons were excited by an...
-
Microstructure and Electrical Properties of Fe,Cu Substituted (Co,Mn)3O4 Thin Films
PublicationIn this work, thin films (~1000 nm) of a pure MnCo2O4 spinel together with its partially substituted derivatives (MnCo1.6Cu0.2Fe0.2O4, MnCo1.6Cu0.4O4, MnCo1.6Fe0.4O4) were prepared by spray pyrolysis and were evaluated for electrical conductivity. Doping by Cu increases the electrical conductivity, whereas doping by Fe decreases the conductivity. For Cu containing samples, rapid grain growth occurs and these samples develop cracks...
-
The XRD diffraction patterns of as-prepared (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials synthesized via the solid state reaction method
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 900 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 1000 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 1100 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The 2p XPS spectra of transition metals in Ce0.9M0.1O2
Open Research DataThe dataset consists of 2p XPS spectra of transition metals in Ce0.9M0.1O2 where (M=Mn, Fe, Co, Ni, Cu). X-ray Photoelectron Spectroscopy analysis (XPS) was performed using X-ray photoelectron spectrometer Omnicron NanoTechnology with 128-channel collector. XPS measurements were undertaken in ultra-high vacuum conditions, below 1.1x10-8 mbar. Photoelectrons...
-
Near Boundary Acoustic Streaming in Ni-Fe alloy electrodeposition control
PublicationSilny wpływ na osadzanie elektrochemiczne stopów metali mają zjawiska występujące w warstwie dyfuzyjnej, modyfikujące rozkład koncentracji jonów w odmienny sposób dla każdego ze składników. Artykuł przedstawia metodę pobudzania akustycznego prowadzącą do kontrolowanego, jednorodnego osadzania stopów. Metoda ta polega na generowaniu prze-pływu akustycznego prostopadle do powierzchni osadzania, w polu stojącej fali akustycznej równoległej...
-
Kinetic studies of complexation reaction of polyoxaalkyl phosphates with Fe(III) in ethanol
Publication -
Standard and Fast Selective Catalytic Reduction of NO with NH3on Zeolites Fe-BEA
Publication -
Laser Surface Alloying of Aluminium Alloys with Cu/Fe Metallic Powders
Publication -
Modelling and FE-simulation of plastic ductile damage evolution in plates and shells
Publication -
Kinetics of aquation of [Co(ODA)(H2O)3] induced by Fe(III)
Publication -
J. FE modelling of cracks in concrete elements within continuum mechanics.
PublicationW artykule przedstawiono wyniki symulacji rys zakrzywionych w elementach betonowych w warunkach mieszanego sposobu obciążenia. Symulacje wykonano przy zastosowaniu 3 różnych modeli: modelu sprężysto-plastycznego, modelu w ramach mechaniki zniszczeniowej i modelu z rysami obracającymi się.
-
FE-modelling of strain localization in concrete with coupled elasto-plasticity and damage
PublicationW artykule przedstawiono wyniki numerycznej dla zginania belki betonowej przy zastosowaniu modelu sprężysto-plastycznego, modelu z degradacja sztywności i modelu połączonego sprężysto-plastycznego z degradacją sztywności. Wszystkie modele rozszerzono o długość charakterystyczną mikrostruktury za pomocą teorii nielokalnej.
-
Structural and electrical properties of Sr(Ti,Fe)O3-δ materials for SOFC cathodes
PublicationW niniejszym artykule, dwa związki SrTiO3 domieszkowanego Fe przebadano pod względem przydatności na katody w tlenkowych ogniwach paliwowych. SrTi0.65Fe0.35O3 i SrTi0.5Fe0.5O3 zostały przebadane pod względem reaktywności chemicznej z elektrolitem YSZ. Stwierdzono, że przewodnictwo elektryczne tych związków jest stosunkowo niskie: 0,4 S/cm i 2 S/cm odpowiednio dla STF35 i STF50.
-
Fe local structure in Pt-free nitrogen-modified carbon based electrocatalysts: XAFS study
PublicationThe paper presents a new results on the bonding environment (coordination number and geometry) and on oxidation states of Fe in nitrogen-modified Fe/C composites used as Pt-free catalysts for oxygen reduction in Direct Hydrogen Fuel Cells. Starting from glucose or fructose, two catalysts displaying different electrochemical performance were prepared and studied in the form of pristine powder and thin catalytic layer of electrode...
-
Preparation and characterisation of iron substituted Mn1.7Cu1.3-xFexO4 spinel oxides (x = 0, 0.1, 0.3, 0.5)
PublicationSpinel oxides with the general formula Mn1.7Cu1.3-xFexO4 (x= 0, 0.1, 0.3, 0.5) were prepared and evaluated in this work for their properties at high temperatures. The effect of partially substituting Cu by Fe has not been studied so far for this group of materials and is thus evaluated in this work. Mn1.7Cu1.3-xFexO4 powders were synthesised by a soft chemistry process and studied in terms of crystallographic phase analysis, electrical...
-
Comprehensive Comparison of a Few Variants of Cluster Analysis as Data Mining Tool in Supporting Environmental Management
PublicationA few variants of hierarchical cluster analysis (CA) as tool of assessment of multidimensional similarity in environmental dataset are compared. The dataset consisted of analytical results of determination of metals (Na, K, Ca, Sc, Fe, Co, Zn, As, Br, Rb, Mo, Sb, Cs, Ba, La, Ce, Sm, Hf and Th) in ambient air dried and kept alive, by the means of hydroponics, moss baskets collected in 12 locations on the area of Tricity (Poland)....
-
Mechanism of hopping conduction in Be–Fe–Al–Te–O semiconducting glasses and glass–ceramics
PublicationElectrical properties of beryllium-alumino-tellurite glasses and glass–ceramics doped with iron ions were studied using impedance spectroscopy. The conductivity was measured over a wide frequency range from 10 mHz to 1 MHz and the temperature range from 213 to 473 K. The D.C. conductivity values showed a correlation with the Fe-ion concentration and ratio of iron ions on different valence states in the samples. On the basis of...
-
Structural Properties and Water Uptake of SrTi1−xFexO3−x/2−δ
PublicationIn this work, Fe-doped strontium titanate SrTi1−xFexO3−x/2−δ, for x = 0–1 (STFx), has been fabricated and studied. The structure and microstructure analysis showed that the Fe amount in SrTi1−xFexO3−x/2−δ has a great influence on the lattice parameter and microstructure, including the porosity and grain size. Oxygen nonstoichiometry studies performed by thermogravimetry at different atmospheres showed that the Fe-rich compositions...
-
Fabrication and structural properties of Y and Fe co-doped SrTiO3 nanoceramics for SOFC
PublicationYttria and iron co-doped strontium titanate perovskites, (Y0,07Sr0,93Ti1-xFexO3-δx=0,1; 0,2) samples were fabricated by two methods: solid-state synthesis (SS) and the Pechinisol-gel modified method. The morphology of samples were measured by SEM and X-raydiffraction. Results were compared and discussed. The strong relationship between fabricationprocedure and microstructure has been proven. It was also observed, that the nanoceramicsobtained...
-
Preparation and characterization of catalyst mix Fe-Co/MgO for carbon nanotubes growth
Publication -
Room‐Temperature Multiferroicity and Magnetization Dynamics in Fe/BTO/LSMO Tunnel Junction
Publication -
Effect of nanosilica on characteristics of carbonizates of phenol-formaldehyde resin – Fe(acac)3
Publication