Search results for: HUME%20DAVID
-
An Experimental Investigation of Pressure Wave Celerity During the Transient Slurry Flow
PublicationTransportation of slurries in pressure pipelines is an example of a complex flow due to specific parameters of transported medium. For practitioners, the economy of designing and maintenance is usually the most important factor. For this reason, most of hydrotransport installations are fairly simple; however, they become more vulnerable to negative effects of the transient flow which can occur in pressure pipelines. As the consequence,...
-
New nanoadsorbent based on magnetic iron oxide containing 1,4,7,10-tetraazacyclododecane in outer chain (Fe3O4@SiO2-cyclen) for adsorption and removal of selected heavy metal ions Cd2+, Pb2+, Cu2+
PublicationMagnetic Fe3O4@SiO2-cyclen nanoparticles were prepared and used as adsorbent for Cd2+, Pb2+ and Cu2+ from aqueous solution removal process controlled with differential pulse anodic stripping voltammetry (DPASV) and hanging mercury drop electrode (HDME). Nanomaterial was synthesised in three-step process co-precipitation of Fe3O4 core, coating with silane and N-(3-(triethoxysilyl)propyl)-1,4,7,10-tetraazacyclododecane-1-carboxamide...
-
Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods
PublicationChanges in the properties of bitumen binders that occur as a result of aging have a huge impact on the durability of products produced from them. In particular, asphalt pavements, which constitute the most common use of petroleum bitumen, are susceptible to damage resulting from the increasing stiffness of the bitumen during its life cycle. Increased stiffness of asphalt pavements reduces the pavement resistance to low-temperature...
-
Latest Achievements in Concrete Structures Three-Dimensional Printing
PublicationWe can hear about three-dimensional printed concrete structures for several years, up to date solutions in this technology allow entire printing settlements of tiny concrete houses. Due to technical limitations, these houses are still small and not very durable, but undoubtedly, this technology is developing. Home printed in three-dimensional technology can be an alternative to modular container buildings implemented in areas affected...
-
In-Out Surface Modification of Halloysite Nanotubes (HNTs) for Excellent Cure of Epoxy: Chemistry and Kinetics Modeling
PublicationIn-out surface modification of halloysite nanotubes (HNTs) has been successfully performed by taking advantage of 8-hydroxyquinolines in the lumen of HNTs and precisely synthesized aniline oligomers (AO) of different lengths (tri- and pentamer) anchored on the external surface of the HNTs. Several analyses, including FTIR, H-NMR, TGA, UV-visible spectroscopy, and SEM, were used to establish the nature of the HNTs’ surface engineering....
-
Modelling Long‐Term Transition from Coal‐Reliant to Low‐Emission Power Grid and District Heating Systems in Poland
PublicationEnergy systems require technological changes towards climate neutrality. In Poland, where the power system is dominated by outdated coal-fired power plants, efforts to minimize the environmental impact are associated with high costs. Therefore, optimal paths for the development of the energy sector should be sought in order to achieve ambitious long-term strategic goals, while minimizing the negative impact on the consumers’ home...
-
Pharmaceuticals wastewater treatment via different advanced oxidation processes: Reaction mechanism, operational factors, toxicities, and cost evaluation – A review
PublicationPharmaceuticals comprises different drugs used for treating different infections in human being and animals. The huge quantities of pharmaceuticals used are found to discharge into different water resources and cause different health and environmental problems. The continuous and large-scale discharge of pharmaceuticals increases their persistency which can consequently make them more toxic. The different advanced oxidation processes...
-
Kriging-assisted hybrid reliability design and optimization of offshore wind turbine support structure based on a portfolio allocation strategy
PublicationIn recent years, offshore wind power generation technology has developed rapidly around the world, making important contributions to the further development of renewable energy. When designing an Offshore Wind Turbine (OWT) system, the uncertainties in parameters and different types of constraints need to be considered to find the optimal design of these systems. Therefore, the Reliability-Based Design Optimization (RBDO) method...
-
Customization of UWB 3D-RTLS Based on the New Uncertainty Model of the AoA Ranging Technique
PublicationThe increased potential and effectiveness of Real-time Locating Systems (RTLSs) substantially influence their application spectrum. They are widely used, inter alia, in the industrial sector, healthcare, home care, and in logistic and security applications. The research aims to develop an analytical method to customize UWB-based RTLS, in order to improve their localization performance in terms of accuracy and precision. The analytical...
-
Manufacturing and Recycling Impact on Environmental Life Cycle Assessment of Innovative Wind Power Plant Part 1/2
PublicationWind power plants are considered as ecologically-clean source of energy. However, manufacturing processes cannot be treated that way. Manufacturing processes consume huge amount of electrical and thermal energy and significant amount of materials, e.g. steel, polymers, oils and lubricants. All of the above could be potentially harmful for environment. There are not many works and publications regarding life-cycle analysis of wind...
-
Green engineered biomaterials for bone repair and regeneration: Printing technologies and fracture analysis
PublicationDespite the exceptional self-regeneration properties of bone, severe injuries often require additional surgical intervention such as using artificial bone constructs. These structures need to meet a number of criteria regarding their structure, performance, alongside the rate and the mechanism of erosion and fracture when implanted, for stimulating the regeneration of defected bone and, more critically providing support in the...
-
Electrust Electrust: Dynamics of Trust and Distrust Creation in Internet Voting
ProjectsProject realized in Gdasnk university of technology according to 101038055 agreement from 2021-04-22
-
Nasal nitric oxide in upper airways in children with asthma and allergic rhinitis
Publication -
Exhaled nitric oxide in pediatric patients with respiratory disease
Publication -
Reasons Fostering or Discouraging the Implementation of Central Bank-Backed Digital Currency: A Review
Publication -
DEVONIAN SILICICLASTIC ROCKS OF THE BABÍ LOM LOCALITY (SOUTHERN MORAVIA, CZECH REPUBLIC): SEDIMENTARY ENVIRONMENT RECONSTRUCTION AND PROVENANCE STUDY
Publication -
Derandomizing random walks in undirected graphs using locally fair exploration strategies
PublicationW pracy rozważono problem eksploracji anonimowego nieskierowanego grafu przez bezpamięciowego robota. Zaprojektowane strategie eksploracji cechują się własnością lokalnej sprawiedliwości, tj. kolejne krawędzie trawersowane przez robota wybierane są na podstawie lokalnych informacji tak, aby zapewnić równomierne wykorzystanie krawędzi w sensie pewnego kryterium. Okazuje się, że odpowiedni dobór kryterium jest kluczowy do zapewnienia...
-
Disciplines and measures of information resilience
PublicationCommunication networks have become a fundamental part of many critical infrastructures, playing an important role in information delivery in various failure scenarios triggered e.g., by forces of nature (including earthquakes, tornados, fires, etc.), technology-related disasters (for instance due to power blackout), or malicious human activities. A number of recovery schemes have been defined in the context of network resilience...
-
Linear Pantographic Sheets: Existence and Uniqueness of Weak Solutions
Publicationwe address the well-posedness of the planar linearized equilibrium problem for homogenized pantographic lattices. To do so: (i) we introduce a class of subsets of anisotropic Sobolev’s space as the most suitable energy space E relative to assigned boundary conditions; (ii) we prove that the considered strain energy density is coercive and positive definite in E ; (iii) we prove that the set of placements for which the strain...
-
Detection of the Bee Queen Presence Using Sound Analysis
PublicationThis work describes the system and methods of data analysis we use for beehive monitoring. We present overview of the hardware infrastructures used in hive monitoring systems and we describe algorithms used for analysis of this kind of data. Based on acquisited signals we construct the application that is capable to detect an absence of honey bee queen. We describe our method of signal analysis and present results that allow us...
-
Text Categorization Improvement via User Interaction
PublicationIn this paper, we propose an approach to improvement of text categorization using interaction with the user. The quality of categorization has been defined in terms of a distribution of objects related to the classes and projected on the self-organizing maps. For the experiments, we use the articles and categories from the subset of Simple Wikipedia. We test three different approaches for text representation. As a baseline we use...
-
Experimentation, material modelling and simulation of bonded joints with a flexible adhesive
PublicationThe paper deals with material parameters identification of a flexible adhesive and the numerical simulation of its behaviour in a single lap bonded joint. The material modelling was based on the simple shear and tensile-shear laboratory tests of the bonded joints made of thin aluminium and polyurethane plates with the flexible adhesive Terostat MS 9360 manufactured by Henkel AG & Co. The adhesive was considered as a hyperelastic...
-
On the Importance of Resilience Engineering for Networked Systems in a Changing World
PublicationResilience is featured increasingly often in the media, usually applied to society when faced, for example, with disasters such as flooding and the enormous challenges that the Covid-19 pandemic posed. There are now many resilience-related discussion groups worldwide, and some standards initiatives devoted in particular to city resilience. However, there is relatively little explicit interest in resilience engineering for communication...
-
Review of the Complexity of Managing Big Data of the Internet of Things
PublicationTere is a growing awareness that the complexity of managing Big Data is one of the main challenges in the developing feld of the Internet of Tings (IoT). Complexity arises from several aspects of the Big Data life cycle, such as gathering data, storing them onto cloud servers, cleaning and integrating the data, a process involving the last advances in ontologies, such as Extensible Markup Language (XML) and Resource Description...
-
Advances in Architectures, Big Data, and Machine Learning Techniques for Complex Internet of Things Systems
PublicationTe feld of Big Data is rapidly developing with a lot of ongoing research, which will likely continue to expand in the future. A crucial part of this is Knowledge Discovery from Data (KDD), also known as the Knowledge Discovery Process (KDP). Tis process is a very complex procedure, and for that reason it is essential to divide it into several steps (Figure 1). Some authors use fve steps to describe this procedure, whereas others...
-
Framework for Integration Decentralized and Untrusted Multi-vendor IoMT Environments
PublicationLack of standardization is highly visible while we use historical data sets or compare our model with others that use IoMT devices from different vendors. The problem also concerns the trust in highly decentralized and anonymous environments where sensitive data are transferred through the Internet and then are analyzed by third-party companies. In our research we propose a standard that has been implemented in the form of framework...
-
Literature review of user needs, toward user requirements
PublicationThis report has been developed in the frame of the IEA SHC Task 61 Subtask A “User requirements”. The main objective was to rethink and reformulate user requirements to lighting (daylighting and electric lighting) in public buildings on the basis of a thorough literature study. The work is a joint effort of a number of scientists and represents collective knowledge in this topic. The concept of Lighting quality is the one, among...
-
Daylight in Architecture 2022/23
e-Learning CoursesTutor: Professor Claudia Naves David Amorim (University of Brasilia) Project: 60 h (lectures + online platform + individual consultations) With a support of e-platform NLITED educational content; http://lms.nlited.eu/, Students will become familiar with the different methods of daylight assessment within the built environment. Innovative daylight design is understood as a better user-centred and energy-efficient design strategy. The...
-
Towards spectral sensitivity curve for two-photon vision mechanism
PublicationAbstract Purpose: The perceived brightness of different visible light sources can be compared with photometric units based on the standardized luminosity curves (300-780nm range). As reported previously (PNAS 111(50), pp. E5445-E5454 (2014)), near-infrared (NIR) radiation can cause isomerization of visual pigments by one- or two-photon absorption. The perceived color of the stimulus is red in the case of one-photon vision (1PV)...
-
David J. Cocovi-Solberg dr
People -
Original article Polish version of the Cognitive Distortions Scale (CDS): Preliminary validation and personality correlates
Publication -
Modeling organic nitrogen conversions in activated sludge bioreactors
PublicationOpracowano model przemian azotu organicznego (Norg)jako rozszerzenie Modelu Osadu Czynnego Nr 2d (ASM2d). Nowy model zawiera trzy frakcje Norg: rozpuszczoą, koloidalną i zawesinową. Każda frakcja została podzielona na dwie podfrakcje - rozkładalną i nierozkładalną. Model został zweryfikowany w oparciu o wyniki badań eksperymentalnych w oczyszczalni ścieków Gdańsk-Wschód.
-
Chiral analysis of chloro intermediates of methylamphetamine by one-dimensional and multidementional NMR and GC/MS
PublicationImpurity profiling and classification of abused drugs using chiral analytical techniques is of particular interest and importance because of the additional information obtained fromthis approach. When these methods are applied to the synthesis of illicitly used substances, they can supply valuable information about the conditions/chemicals used in the synthesis. We have applied GC and NMR methods to the study of intermediates found...
-
To i-vote or not to i-vote: Drivers and barriers to the implementation of internet voting
PublicationThis paper investigates the drivers and barriers of internet voting and the implications of a global pandemic for the development of the respective technology. In contrast to the expected uptake in the early 2000s of internet voting, the technology is still rather seldomly used in election systems around the world. The paper at hand explores the different forces that drive or impede internet voting adoption from a political, social,...
-
Modeling organic nitrogen conversions in activated sludge bioreactors
PublicationFor biological nutrient removal (BNR) systems designed to maximize nitrogen removal, the effluent total nitrogen (TN) concentration may range from 2.0 to 4.0 g N/m3 with about 25-50% in the form of organic nitrogen (ON). In this study, current approaches to modeling organic N conversions (separate processes vs. constant contents of organic fractions) were compared. A new conceptual model of ON conversions was developed and combined...
-
Religious social action and its organizational profiles
PublicationPurpose Social action implemented by the Church via its affiliated entities, foundations and associations may be viewed as a uniform activity. In reality, however, several organizational profiles exist that depend on the origin of these organizations (lay or religious), the scope of their activities (local or general) and their dependence on resources (whether from public administration or civil society). The paper aims to discuss...
-
Recent Advances in Loop Heat Pipes with Flat Evaporator
PublicationThe focus of this review is to present the current advances in Loop Heat Pipes (LHP) with flat evaporators, which address the current challenges to the wide implementation of the technology. A recent advance in LHP is the design of flat-shaped evaporators, which is better suited to the geometry of discretely mounted electronics components (microprocessors) and therefore negate the need for an additional transfer surface (saddle)...
-
Characteristics and fate of organic nitrogen in municipal biological nutrient removal wastewater treatment plants
PublicationThe aim of this study was to investigate the occurrence and fate of colloidal and dissolved organic nitrogen (CON and DON) across biological nutrient removal (BNR) activated sludge bioreactors. Primary and secondary effluent total nitrogen (TN) measurements and component fractionation, CON and DON concentration profiles across BNR bioreactors, and laboratory batch experiments with the process mixed liquor were carried out at several...
-
Structural characterization of plasmenylcholine photooxidation products.
PublicationZbadano fotoutlenianie PPlsC w obecności rozpuszczalnego w wodzie sensybilizatora (uczulacza) jakim jest tetrasulfonian ftalocyjaniny zawierający aluminium(III). Stosując metody chromatograficzne (HPLC) wyizolowano, zidentyfikowano oraz scharakteryzowano zasadnicze produkty powstające w obecności tlenu podczas ciągłego naświetlania światłem widzialnym o długości fali 610nm.
-
Novel single-stranded DNA-binding proteins from extreme psychrophilic bacterium Psychromonas ingrahamii 37
PublicationWe report the identification and characterization of the single-stranded DNA binding protein (SSB) from extreme psychrophilic bacterium Psychromonas ingrahamii 37 (PinSSB) that grows expotentially at -12°C and may well grow at even lower temperatures. PinSSB is one of the largest known bacterial SSB protein consisting 222 amino acid residues with a calculated molecular mass of 25.1 kDa. The analysis by gel filtration chromatography...
-
Hydroxyl and sulfate radical-based degradation of ciprofloxacin using UV-C and/or Fe2+-catalyzed peroxymonosulfate: Effects of process parameters and toxicity evaluation
PublicationCiprofloxacin (CIP) is a valuable antibiotic and discharged in huge quantities in aquatic environment. Different •OH and SO4•−-based advanced oxidation technologies (AOTs), e.g., Fe2+/PMS, UV-C/PMS, and UV-C/Fe2+/PMS are developed for treatment of CIP. The removal of CIP by Fe2+/PMS, UV-C/PMS and UV-C/Fe2+/PMS was 63, 77, and 87 %, respectively, under identical conditions which showed better performance of UV-C/Fe2+/PMS. The UV-C/Fe2+/PMS...
-
Application of Smart IoT Technology in Project Management Scenarios
PublicationThe report presents a low-cost and flexible solution to control and monitor home and industrial appliances. The popularity of automation devices has increased greatly in recent years due to higher affordability and simplicity through IoT phone and tablet connectivity. For this purpose, we have developed the IoT Outlet: a stand-alone communication unit, used to connect outlets to the internet. The IoT Plug is a power switch which...
-
Modeling the Customer’s Contextual Expectations Based on Latent Semantic Analysis Algorithms
PublicationNowadays, in the age of Internet, access to open data detects the huge possibilities for information retrieval. More and more often we hear about the concept of open data which is unrestricted access, in addition to reuse and analysis by external institutions, organizations and people. It’s such information that can be freely processed, add another data (so-called remix) and then published. More and more data are available in text...
-
Electron collisions with methyl-substituted ethylenes: Cross section measurements and calculations for 2-methyl–2-butene and 2,3-dimethyl–2-butene
PublicationWe report electron-scattering cross sections determined for 2-methyl–2-butene [(H3C)HC==C(CH3)2] and 2,3-dimethyl–2-butene [(H3C)2C=C(CH3)2] molecules. Absolute grand-total cross sections (TCSs) were measured for incident electron energies in the 0.5–300 eV range, using a linear electron-transmission technique. The experimental TCS energy dependences for the both targets appear to be very similar with respect to the shape. In each...
-
Numerical model for thin liquid film with evaporation and condensation on solid surfaces in systems with conjugated heat transfer
PublicationCondensation and evaporation processes from wetted surfaces are of utmost importance in many technological or industrial applications. In many devices such as home-appliances and air conditioning systems just to name a few, condensation and evaporation processes greatly impact their performance and energy efficiency; The physics of these processes is quite complex, involving conjugate heat transfer among solid–liquid film-gaseous...
-
Commercial function as a treat to the monument - 25 years of experience in the commercialization of monuments in Gdansk, Poland
PublicationThe principles of the market economy adopted in Poland in the nineties have significantly touched the resources of immovable monuments. As a result, monuments have become a product of culture subject to the rules of the free market; and state ownership, patronage and decision-making practice has now been replaced by private interest. Practical monument use has also changed with the shift in ownership of objects after privatization...
-
DIAGNOSIS OF MALIGNANT MELANOMA BY NEURAL NETWORK ENSEMBLE-BASED SYSTEM UTILISING HAND-CRAFTED SKIN LESION FEATURES
PublicationMalignant melanomas are the most deadly type of skin cancer but detected early have high chances for successful treatment. In the last twenty years, the interest of automated melanoma recognition detection and classification dynamically increased partially because of public datasets appearing with dermatoscopic images of skin lesions. Automated computer-aided skin cancer detection in dermatoscopic images is a very challenging task...
-
Fluid structure interaction study of non-Newtonian Casson fluid in a bifurcated channel having stenosis with elastic walls
PublicationFluid–structure interaction (FSI) gained a huge attention of scientists and researchers due to its applications in biomedical and mechanical engineering. One of the most important applications of FSI is to study the elastic wall behavior of stenotic arteries. Blood is the suspension of various cells characterized by shear thinning, yield stress, and viscoelastic qualities that can be assessed by using non-Newtonian models. In this...
-
PLA–Potato Thermoplastic Starch Filament as a Sustainable Alternative to the Conventional PLA Filament: Processing, Characterization, and FFF 3D Printing
PublicationThe growing popularity of the fused filament fabrication (FFF) 3D printing technology in science, industry, and in-home use is associated with an increased demand for high-quality polymer filaments. This study presents an in-depth characterization and analysis of a self-made bio-based polylactide (PLA)/thermoplastic potato starch (TPS) filament dedicated for the FFF 3D printing technology. The obtained results were compared with...
-
Self Portrait with a Mask
PublicationPaweł SASIN - Self Portrait with a Mask “Every work of art is the child of its time, and, in many cases, the mother of our emotions. “ Wassily Kandynsky, Concerning the Spiritual in Art The two years 2020 and 2021 were marked by the COVID-19 pandemic – a lengthy period of time in which everyone felt in danger of losing one’s health or life. As a result, many people were experiencing negative emotion, becoming subject to psychological...