Search results for: CSD

• Rotordynamic characteristics of a chamber seal

  Publication

  • K. Kosowski
  • W. Włodarski

  - Year 2009

  The paper presents the results of numerical and experimental investigations into pressure forces generated in a turbine labyrinth seal of a modernized type. The experiments were performed on a single-stage air model turbine of the impulse type. The experiments were performed on a single-stage air model turbine of the impulse type. The experimental data were compared with theoretical results obtained by means of CFD Fluent Code....

• Influence of landfill leachate on municipal wastewater treatment - model plant(WWTP-MP)

  Publication

  • B. Quant
  • S. Fudala-Książek
  • A. Łuczkiewicz
  • E. Kulbat
  • K. Jankowska
  • K. Czerwionka
  • K. Olańczuk-Neyman

  - Year 2009

  Abstract In the current study, wastewater treatment model plant (WWTP-MP) was used to investigate the possibilities of landfill leachate co-treatment together with municipal wastewater. The WWT-MP, designed as an A2O multiphase system, was fed with the raw municipal wastewater (from the WWTP Gdańsk "Wschód'', Qav.=82x103 m3/d) with increasing, from 1 to 5 % (vol.), quantity of landfill leachate (collected from Gdańsk landfill ''Szadółki")....

• Qualia: About Personal Emotions Representing Temporal Form of Impressions - Implementation Hypothesis and Application Example

  Publication

  • Z. Kowalczuk
  • M. Czubenko
  • M. Gruba

  - Year 2022

  The aim of this article is to present the new extension of the xEmotion system as a computerized emotional system, part of an Intelligent System of Decision making (ISD) that combines the theories of affective psychology and philosophy of mind. At the same time, the authors try to find a practical impulse or evidence for a general reflection on the treatment of emotions as transitional states, which at some point may lead to the...

  Full text to download in external service

• The Impact of Sloshing Liquids on Ship Stability for Various Dimensions of Partly Filled Tanks

  Publication

  • P. Krata

  - TransNav - The International Journal on Marine Navigation and Safety of Sea Transportation - Year 2013

  Liquid sloshing phenomenon taking place in partly filled ships' tanks directly affects the stability of a vessel. However, only static calculations are carried out onboard ships nowadays and static transfer of liquid weight is taken into account in the course of routine stability calculation. The paper is focused on a dynamic heeling moment due to liquid sloshing in tanks onboard ships. A number of numerical simulations of liquid...

  Full text available to download

• A Method of Assessment of the Liquid Sloshing Impact on Ship Transverse Stability

  Publication

  • P. Krata

  - TransNav - The International Journal on Marine Navigation and Safety of Sea Transportation - Year 2014

  Liquid sloshing phenomenon taking place in partly filled ships? tanks directly affects the stability of a vessel. However, only static calculations are carried out onboard ships nowadays and static transfer of liquid weight is taken into account in the course of routine stability calculation. The paper is focused on a dynamic heeling moment due to liquid sloshing in tanks onboard ships. The set of numerical simulations of liquid...

  Full text available to download

• The low coherence Fabry-Pérot interferometer with diamond and ZnO layers

  Publication

  • D. Majchrowicz
  • W. Den
  • M. Hirsch

  - Year 2016

  The authors present a fiber-optic Fabry-Pérot interferometer built with the application of diamond and zinc oxide (ZnO) thin layers. Thin ZnO films were deposited on the tip of a standard telecommunication single-mode optical fiber (SMF- 28) while the diamond layer was grown on the plate of silicon substrate. Investigated ZnO layers were fabricated by atomic layer deposition (ALD) and the diamond films were deposited using Microwave...

  Full text to download in external service

• Struktury fotowoltaiczne z planarnym heterozłączem półprzewodnik II-VI / półprzewodnik molekularny

  Publication

  • R. Signerski
  • G. Jarosz
  • J. Szostak
  • J. Godlewski

  - Prace Instytutu Elektrotechniki - Year 2014

  Artykuł przedstawia wybrane wyniki badań własnych nad układami hybrydowymi zbudowanymi na bazie złącza półprzewodnik nieorganiczny II-VI/półprzewodnik organiczny. Na podstawie analizy położenia pasm energetycznych warstw wchodzących w skład wytworzonych ogniw oraz charakterystyk spektralnych prądu zwarcia tych urządzeń określone zostały procesy prowadzące do fotogeneracji nośników ładunku w badanych układach. W ogniwach zbudowanych...

  Full text to download in external service

• OPERATIONAL PROBLEMS OF CONSTRUCTED WETLAND FOR LANDFILL LEACHATE TREATMENT: CASE STUDY

  Publication

  • H. Obarska-Pempkowiak
  • M. Gajewska
  • E. Wojciechowska

  - Journal of Ecological Engineering - Year 2013

  The present paper discusses the quality fluctuations of leachate from municipal landfill in Gdansk (Poland) over the last 5 years and the evaluation of a wetland system designed for treatment of the leachate. The research has been conducted during a 5-year period. The constructed wetland for leachate treatment was built in 2001; it consists of 2 horizontal subsurface flow reed beds, working in parallel. In the period 2005–2006...

  Full text available to download

• The use of thin diamond films in fiber optic low-coherence interferometers”

  Publication

  • D. Majchrowicz
  • K. Karpienko

  - IOP Conference Series: Materials Science and Engineering - Year 2015

  In this paper we present the use of thin diamond films in fiber-optic low-coherence interferometers. Two kinds of diamond surfaces were used: undoped diamond film and boron-doped diamond film. They were deposited on glass plates as well as silicon layers. A conventionally used mirror was used as a reference layer. Diamond films were deposited using Microwave Plasma Enhanced Chemical Vapour Deposition (μPE CVD) system. Measurements...

  Full text available to download

• Innowacyjne technologie CAx / PLM

  Publication

  • K. Niklas
  • C. Żrodowski

  - Year 2014

  Wyzwania stawiane przed firmami projektowymi, produkcyjnymi, usługowymi to m.in. rosnące wymagania innowacyjności produktów. Zauważalna jest silna potrzeba wprowadzania nowych produktów wysokiej jakości, w krótkim czasie i konkurencyjnych cenach. Zauważalny jest również aspekt konieczności minimalizowania ryzyka związanego z wprowadzaniem nowych rozwiązań na rynek. W odpowiedzi na te wyzwania wprowadzono nowe technologie wspomagające...

• Effectiveness of pollutants removal in hybrid constructed wetlands – different configurations case study

  Publication

  • M. Gajewska
  • K. Jóźwiakowski
  • K. Cur

  - Year 2017

  In recent years, an increase in interest in hybrid constructed wetland systems (HCWs) has been observed. The aim of the paper is to compare different HCW configurations in terms of mass removal rates and efficiency of pollutants removal. Analysed data have been collected at multistage constructed wetlands in Poland, which are composed by at least two beds: horizontal subsurface flow (SSHF) and vertical subsurface flow (SSVF). The...

  Full text available to download

• CAD w projektowaniu układów i systemów bardzo wysokiej częstotliwości - 2022

  e-Learning Courses

  • K. Nyka
  • K. Trzebiatowski
  • M. Mrozowski

  Celem przedmiotu jest zapoznanie studentów z narzędziami CAD stosowanymi w technice wysokich częstotliwości (i ich ograniczeniami). Przedmiot pozwala poznać specyficzne aspekty wspomaganego komputerem modelowania układów bardzo wysokich częstotliwości – od systemu do modelowania fizycznych własności elementów. 

• CAD w projektowaniu układów i systemów bardzo wysokiej częstotliwości - 2023/24

  e-Learning Courses

  • K. Nyka
  • K. Trzebiatowski
  • M. Mrozowski

  Celem przedmiotu jest zapoznanie studentów z narzędziami CAD stosowanymi w technice wysokich częstotliwości (i ich ograniczeniami). Przedmiot pozwala poznać specyficzne aspekty wspomaganego komputerem modelowania układów bardzo wysokich częstotliwości – od systemu do modelowania fizycznych własności elementów. 

• CAD w projektowaniu układów i systemów bardzo wysokiej częstotliwości - 2024

  e-Learning Courses

  • K. Nyka
  • K. Trzebiatowski
  • M. Mrozowski

  Celem przedmiotu jest zapoznanie studentów z narzędziami CAD stosowanymi w technice wysokich częstotliwości (i ich ograniczeniami). Przedmiot pozwala poznać specyficzne aspekty wspomaganego komputerem modelowania układów bardzo wysokich częstotliwości – od systemu do modelowania fizycznych własności elementów. 

• Katedra Energoelektroniki i Maszyn Elektrycznych

  Research Teams

  • Department of Power Electronics and Electrical Machines

  * Modelowania, projektowania i symulacji przekształtników energoelektronicznych * Sterowania i diagnostyki przekształtników energoelektronicznych * Kompatybilności elektromagnetycznej przekształtników i regulowanych napędów elektrycznych * Jakości energii elektrycznej * Modelowania, projektowania i diagnostyki maszyn elektrycznych i transformatorów * Projektowania czujników i silników piezoelektrycznych * Technik CAD i CAE dla...

• A decade of Poland`s integrated Road Safety Programme - economic develop-ment vs. road unsafety. W: [CD-ROM]. Conference proceedings. SORIC´02. 2nd Safety on Road Internationaload International Conference. Kingdom of Bah- rain, 21-23 October 2002. Bahrain: CTRS Univ. Bahrain**2002 [8 s. 5 rys. bibliogr. 5 poz. 10 lat Krajowego Programu Bezpieczeństwa Ruchu Drogowego w Polsce - rozwój ekonomiczny a niebezpieczeństwo ruchu.

  Publication

  • R. Krystek
  • J. Żukowska

  - Year 2002

  Referat zawiera analizę doświadczeń z dziesięciu lat pracy oraz wdrożeń Kra-jowego Programu Bezpieczeństwa Ruchu Drogowego GAMBIT. Przedstawia również analizę przyczyn gwałtownego spadku liczby- śmiertelnych ofiar wypadków dro-gowych w Polsce w roku 2001.

• Recent developments in automatic classification of musical instruments. W:[CD-ROM] Collected papers. First Pan-American/Iberian Meeting on Acoustics. 144 Meeting of the Acoustical Society of America. III Iberoamerican Cong- ress of Acoustics. 9o Mexican Congress of Acoustics. Cancun, Q. R. M‚xico, 2-6 Dec. 2002. [B.m.:ASA]**2002 paper 2aMU4, 7 s. 6 rys. 1 tab. bibliogr. 21 poz. Automatyczne rozpoznawanie muzyki - przykłady eksperymentów.

  Publication

  • B. Kostek

  - Year 2002

  W referacie dokonano przeglądu aktualnego stanu badań w dziedzinie automaty-cznego rozpoznawania muzyki. Przedstawiono też eksperymenty prowadzone aktu-alnie w Katedrze Dźwięku i Obrazu PG. Prace te dotyczyły rozpoznawania klasinstrumentów muzycznych i separacji duetów muzycznych. Pokazano przykładowewyniki i przedstawiono projekt prac do zrealizowania w przyszłych ekspery-mentach.

• WYTWARZANIE WSPOMAGANE KOMPUTEROWO CAD/CAM/CNC [Niestacjonarne][2021/22]

  e-Learning Courses

  • F. Kutt
  • R. Ryndzionek

• CAD. 3D modelling (2022/2023) BSc Arch, sem 2

  e-Learning Courses

  • D. Cyparski

  Conducting unit: Faculty of ArchitectureField of the study: ArchitectureAcademic year: 2022/2023 Summer TermDuration:  15 weeks (30 hours laboratory per term) Subject objectives: The course aim is to demonstrate the application of Computer Aided Design in preparation of architectural 3D models and project presentations. No previous CAD experience is necessary. Using hands-on exercises, students explore how to create project presentations...

• Komputerowe wspomaganie projektowania i CAD (2024/MA) - NT+IM

  e-Learning Courses

  • M. Augustyniak

• Higher responsiveness to rosuvastatin in polygenic versus monogenic hypercholesterolaemia: a propensity score analysis

  Publication

  • M. F. Kaszubowski

  - EUROPEAN HEART JOURNAL - Year 2021

  Background The underlying monogenic defect in familial hypercholesterolemia (FH) can be detected in ∼40% of cases. The majority of mutation-negative patients have a polygenic cause of high LDL-cholesterol (LDL-C) due to having inherited a greater than average number of common LDL-C raising single nucleotide polymorphisms (SNPs). Purpose We sought to investigate, whether the monogenic or polygenic defect in FH is associated with...

  Full text to download in external service

• Cleaner energy for sustainable future using hybrid photovoltaics-thermoelectric generators system under non-static conditions using machine learning based control technique

  Publication

  • A. Mirza
  • P. Szczepankowski
  • J. Łuszcz

  - Sustainable Energy Technologies and Assessments - Year 2022

  In addition to the load demand, the temperature difference between the hot and cold sides of the thermoelectric generator (TEG) module determines the output power for thermoelectric generator systems. Maximum power point tracking (MPPT) control is needed to track the optimal global power point as operating conditions change. The growing use of electricity and the decline in the use of fossil fuels have sparked interest in photovoltaic-TEG...

  Full text to download in external service

• A concept of zero-dimensional and three-dimensional thermodynamic modelling of steam storage in a steam cycle

  Publication

  • P. Ziółkowski

  - Year 2020

  This work presents the thermodynamic model of steam storage in a steam cycle. The innovative steam storage is an integral part of the unit and thus responds quickly to changes in load. This enhances the primary control reserve while maintaining high efficiency of energy conversion. With regard to power plants, it improves the operational safety of generation units, as it prevents boiler and turbines overload in the case of steep...

  Full text to download in external service

• Mechatronics design, modelling and controlling of the Stewart-Gough platform

  Publication

  • D. Owoc
  • K. Ludwiczak
  • R. Piotrowski

  - Year 2019

  This paper presents a mechatronics design of a low cost Stewart-Gough platform (SGP) with rotary actuators. The designed SGP is supposed to be applied in a ball & plate control system. The synthesis of the ball & plate control system is also within the subject of the paper. A mechatronics design process of the SGP was conducted with computer-aided design (CAD) software. Unique analytical solutions of an inverse kinematics problem...

  Full text to download in external service

• Nanolayers in Fiber-Optic Biosensing

  Publication

  • M. Szczerska
  • D. Majchrowicz
  • M. Hirsch
  • P. Struk
  • R. Bogdanowicz
  • M. Bechelany
  • V. Tuchin

  - Year 2018

  In this chapter, fiber-optic sensors based on nanolayers or thin films and their ability to perform biophotonic measurements is presented. In the last decade, fiber-optic sensors have gained popularity as biosensing devices. This has been made possible because of the design and the integration of new materials in fiber-optic technology. Nanolayers and thin films made from various materials such as nanodiamond (NCD), boron-doped...

  Full text to download in external service

• UAV Design and Construction for Real Time Photogrammetry and Visual Navigation

  Publication

  • P. Burdziakowski

  - Year 2018

  A unmanned aerial vehicles applications in photogrammetry have increased rapidly last years. A fast data gathering and processing in real time in some cases become crucial and desired in some application. In the paper, a real time solution is proposed. A real time photogrammetry from UAV is proposed, where image data are gathered and processed on board UAV and finally reconstructed 3D model and measurements are delivered. The paper...

  Full text available to download

• Local electrochemical impedance spectroscopy in dynamic mode of galvanic coupling

  Publication

  • Ł. Burczyk
  • K. Darowicki

  - ELECTROCHIMICA ACTA - Year 2018

  A novel method that combines local electrochemical impedance spectroscopy and mapping in dynamicmode is proposed. Method was validated over two galvanic couplings, namely zinc/copper and cad-mium/copper. Impedance spectrum response for all measuring points was obtained by means ofsimultaneous implementation of selected range of frequencies. Proposed method allows the measure-ment in a more time-efficient manner, at the same time...

  Full text to download in external service

• Influence of Properties of Hydraulic Fluid on Pressure Peaks in Axial Piston Pumps’ Chambers

  Publication

  • P. Patrosz

  - ENERGIES - Year 2021

  The article concentrates on the research of the pressure peaks in a working chamber of an axial piston pump. The main focus of the article is the influence of fluid properties on the pressure peaks value. Experimental and analytical methods were used to determine the impact of the fluid density, viscosity, compressibility and aeration. The article describes the pressure peak generation process and explains the theoretical basis...

  Full text available to download

• Synthesis and electrochemical characteristics of novel dithiocarbamate polymers

  Publication

  • M. Lieder

  - JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS - Year 2008

  Novel dithiocarbamate compounds have been obtained by reacting a linear poly(ethylenimine)polymer, MW 50,000, with CS2. The resulting anionic polymers contain, depending on the reaction conditions, up to two sulfur atoms per one nitrogen atom (approx. 40% w/w). The polymers are soluble in dimethylsulfoxide and insoluble in acetonitrile solutions. In both solvents they are electrochemically active, in the latter case as a cast film...

• Modeling lubricant flow between thrust-bearing pads

  Publication

  • G. Rotta
  • M. Wasilczuk

  - TRIBOLOGY INTERNATIONAL - Year 2008

  Inlet temperature is one of the main inputs in all models for the analysis of fluid film bearing performance. At the same time, inlettemperature distribution and also oil velocity distribution at the inlet are the result of flow phenomena in the gap between the bearingpads. These phenomena are complex and in many cases further affected by any special arrangements of forced oil supply to the gapbetween pads. The reason for such...

  Full text available to download

• Call Control Evaluation in ASON/GMPLS Architecture

  Publication

  • S. Kaczmarek
  • M. Młynarczuk

  - Year 2013

  The Automatically Switched Optical Network (ASON) utilizing Generalized Multi–Protocol Label Switching (GMPLS) protocols named as ASON/GMPLS is one of the propositions of Next Generation Network. The basic assumption of ASON control plane is a separation of call control from connection control. The control plane is divided into call control and connection control components. Presented work regards the problem of call control evaluation...

• Spatial characterization of H 2: CH 4 dissociation level in microwave ECR plasma source by fibre-optic OES

  Publication

  • R. Bogdanowicz
  • Ł. Gołuński
  • M. Sobaszek

  - The European Physical Journal-Special Topics - Year 2013

  Spatially resolved optical emission spectroscopy (SR-OES) was used to investigate microwave activated H2/Ar/CH4 plasma under conditions of the electron cyclotron resonance (ECR). The chemistry and composition of the gas phase were studied using self-designed fibre-optic system with echelle type spectrometer during CVD deposition of polycrystalline diamond. One-dimensional intensity profiles of the main species were collected along...

  Full text to download in external service

• Design and distribution of air nozzles in the biomass boiler assembly

  Publication

  • K. Ronewicz
  • T. Turzyński
  • D. Kardaś

  - Transactions of the Institute of Fluid-Flow Machinery - Year 2013

  Due to energy crisis as well as increasing pollution of the environment, renewable energy sources usage increases all over the world. These facts encouraged authors to start research over developing a uniform biomass boiler calculation model. This paper presents a design of biomass boiler assembly created for ORC (Organic Rankine Cycle) unit since these systems could achieve strong position in energy industry....

• Agregacja amfoterycyny B i wybranych pochodnych - chemometryczna analiza widm UV-Vis

  Publication

  • M. Ślisz
  • J. Mazerski

  - Year 2006

  Prezentowane badania miały na celu poznanie procesu agregacji nowej generacji pochodnych polienowego antybiotyku przeciwgrzybowego - amfoterycyny B. Przebieg procesu agregacji w roztworach wodnych o różnym składzie monitorowano przy pomocy absorpcyjnej spektroskopii UV-Vis. Otrzymane zestawy widm analizowano z zastosowaniem zaawansowanych technik chemometrycznych (PCA, NSD), co pozwoliło na określenie liczby, typu i ilości form...

• DOROTKA, czyli Doskonalenie Organizacji, ROzwoju oraz Tworzenia Kursów Akademickich przez Internet.

  Publication

  • A. Grabowska

  - Year 2005

  W artykule zaprezentowano dedykowaną platformę wspierającą kształcenie na odległość opracowaną i uruchomioną w ramach projektu Leonardo da Vinci TeleCAD (Teleworkers Training for CAD System Users, 1998-2001), wykorzystywaną w latach 2000-2003 do wspomagania przedmiotu Podstawy Informatyki na Wydziale Inżynierii Lądowej Politechniki Gdańskiej. Przedstawiono również, bazujący na wieloletnich doświadczeniach, model DOROTKA (Doskonalenie...

• Time Domain Modeling of Propeller Forces due to Ventilation in Static and Dynamic Conditions

  Publication

  • A. Kozłowska

  - Journal of Marine Science and Engineering - Year 2020

  This paper presents experimental and theoretical studies on the dynamic effect on the propeller loading due to ventilation by using a simulation model that generates a time domain solution for propeller forces in varying operational conditions. For ventilation modeling, the simulation model applies a formula based on the idea that the change in lift coefficient due to ventilation computes the change in the thrust coefficient. It...

  Full text available to download

• Adaptive stochastic and hybrid nonlinear optimization algorithms for improving the effectiveness of the biological processes at WWTP

  Publication

  • R. Piotrowski
  • K. Milewski
  • B. Maciąg

  - BIOCHEMICAL ENGINEERING JOURNAL - Year 2023

  Wastewater treatment plays an important factor in the modern world. Insufficient treatment may result in environmental pollution which can further lead to disasters and diseases. However, processes that take place inside wastewater treatment plants (WWTP) are highly complex in nature, therefore it is difficult to design an efficient, optimal control system. The problem regarding biochemical reactions inside Sequential Batch Reactor...

  Full text to download in external service

• Geographic information system for remote integration of diverse under-water acoustic sensor data

  Publication

  • A. Chybicki
  • Ł. Kamiński
  • Z. Łubniewski
  • K. Bruniecki
  • M. Kulawiak
  • J. Dąbrowski
  • M. Moszyński

  - HYDROACOUSTICS - Year 2009

  Maritime and port areas throughout the world are exposed to many different hazards, like pollution, terrorism and natural disasters. Early detection, identification and preparation of appropriateesponse strategies is especially important in the case of semi-enclosed basins like the Baltic Sea, mainly due to the marine ecosystems' continuous absorption of pollutants including oil, heavy metals and chemicals. Many of those agents...

  Full text available to download

• Identification of ship’s hull mathematical model with numerical methods

  Publication

  • A. Piekło
  • P. Hoffmann
  • A. Witkowska
  • T. Zubowicz

  - Year 2023

  The modern maritime industry is moving toward the development of technology that will allow for full or partial autonomy of ship operation. This innovation places high demands on ship performance prediction techniques at the design stage. The researchwork presented in the article is related to the design stage of the ship and concerns methods for prognosis and evaluation of the specific operational condition of the ship, namely...

  Full text available to download

• Optimization of adsorption of methyl orange from aqueous solution by magnetic CoFe2O4/ZnAl-layered double hydroxide composite using response surface methodology

  Publication

  • Y. M. Desalegn
  • E. A. Bekele
  • T. Amibo
  • T. D. Desissa

  - Materials Research Express - Year 2023

  The CoFe2O4/ZnAl-layered double hydroxide (LDH) composite was successfully developed through a facile co-precipitation method, characterized, and applied as an effective adsorbent for the removal of methyl orange (MO) dye from aqueous solutions. The central composite design (CCD) of the response surface methodology (RSM) was employed to estimate and optimize process variables such as initial MO concentrations, solution pH, adsorbent...

  Full text available to download

• PROPELLER INVESTIGATIONS BY MEANS OF NUMERICAL SIMULATION

  Publication

  • J. Felicjancik

  - Year 2015

  The analyses of hydroacoustics are of high interest at the moment due to strong impact of hydroacoustic phenomena on marine environment; the noises, generated e.g. by marine traffic, may be harmful for sea life. The analyses presented here are focused on one of main sources of noises generated by ships, i.e. cavitating propeller. The goal of the work is the assessment of the cavitation phenomenon, carried out with the standard...

  Full text to download in external service

• Absorption spectroscopy setup for determination of whole human blood and blood–derived materials spectral characteristics

  Publication

  • M. Wróbel
  • M. Gnyba
  • D. Majchrowicz
  • K. Mitura
  • K. Karpienko

  - Year 2015

  A dedicated absorption spectroscopy system was set up using tungsten-halogen broadband source, optical fibers, sample holder, and a commercial spectrometer with CCD array. Analysis of noise present in the setup was carried out. Data processing was applied to the absorption spectra to reduce spectral noise, and improve the quality of the spectra and to remove the baseline level. The absorption spectra were measured for whole blood...

  Full text to download in external service

• Analysis of unsteady flow forces on the thermowell of steam temperature sensor

  Publication

  • S. Kornet
  • D. Sławiński
  • P. Ziółkowski
  • J. Badur

  - Transactions of the Institute of Fluid-Flow Machinery - Year 2015

  In this paper, 3D numerical analysis of unsteady flow forces acting on the measuring sheath of steam temperature is presented. According to that purpose, the CFD (Computation Fluid Dynamic [1]) approach has been used. The nonstationary of fluid acting on the measuring sheath such as: Strouhal frequency, amplitude of pressure, structure of vortex, peak of pressure, field of pressure, field of velocity etc. are studied analytically...

  Full text to download in external service

• Stability of thin film diamond mirror for applications in interferometers under the short-time exposure on selected aggressive chemicals

  Publication

  • D. Majchrowicz
  • M. Hirsch

  - Year 2017

  In presented study a thin boron-doped diamond film was proposed for application in the interferometry as a highly durable optical mirror. The unique properties of the diamond films, like high chemical stability and hardness, allow them to be used even in the chemically aggressive environment, where the commonly used silver mirrors can be susceptible to damage. The investigated nanodiamond layer was fabricated by uPE CVD method...

  Full text to download in external service

• Fate and significance of phthalates and bisphenol A in liquid by-products generated during municipal solid waste mechanical-biological pre-treatment and disposal

  Publication

  • S. Fudala-Książek
  • M. Pierpaoli
  • A. Łuczkiewicz

  - WASTE MANAGEMENT - Year 2017

  Samples of liquid by-products generated by municipal solid waste plants (MSWPs) were tested for the presence of phthalates (PAEs) and bisphenol A (BPA). The results indicated that the wastewater generated during mechanical (sorting unit - SU) and biological (composting unit - CU) pre-treatment (MBT) of residual (mixed) solid waste is a significant source of these compounds. The concentrations of PAEs (up to 32222 lg/L) and BPA...

  Full text available to download

• Antropoidalny Model Inteligentnego Systemu Decyzyjnego dla Jednostek Autonomicznych

  Publication

  • M. Czubenko

  - Year 2017

  Głównym celem pracy jest opracowanie modelu procesów psychologicznych -- od momentu otrzymania bodźca do momentu podjęcia adekwatnej reakcji -- zachodzących w mózgu człowieka (psychologia poznawcza), oraz teorii motywacji (potrzeb, popędów i emocji). Model, zaprezentowany w pracy nazwany Inteligentnym Systemem Decyzyjnym (ISD), może mieć zastosowanie w systemie sterowania jednostką autonomiczną (agentem). W rozprawie rozważa się...

  Full text available to download

• Badania przejmowania ciepła podczas wrzenia na pęku rur ogrzewanych elektrycznie

  Publication

  • K. Krasowski
  • J. Cieśliński

  - Acta Energetica - Year 2011

  W pracy przedstawiono wyniki badań eksperymentalnych wrzenia wody, metanolu i czynnika chłodniczego R141b na poziomym pęku rur gładkich, który w zamierzeniu ma reprezentować fragment parownika zalanego. Badania przeprowadzono dla pęku 19 rurek w układzie trójkątnym, dla dwóch stosunków podziałki do średnicy rurki, równych 1.7 oraz 2.0, w warunkach ciśnienia atmosferycznego i przy podciśnieniu. Wyznaczono zarówno lokalne - w odniesieniu...

  Full text available to download

• Engineering Graphics II (M:31997W1) 2023/24

  e-Learning Courses

  • J. Łubiński
  • B. Bastian

  The course covers subject scope of standardised methods used for the presentation of machine details in projected views, in technical design drawings. Detailed topics include: projection systems, principles of design documentation in machine design, rules in dimensioning and selection of views in technical drawing. Practical excercises are carried out and an introduction to CAD is performed.

• Numerical methods in heat and fluid flow

  e-Learning Courses

  • P. Ziółkowski

    Presentation of issues concerning mathematical modelling of power installations, including thermodynamic cycles and selected devices of power installations using commercial codes, so that the student is able to properly model the process and interpret the results. Presentation of capabilities of CFD code.  

• Rejestracja korespondencji w systemie EZD

  Events

  10-01-2024 09:00 - 10-01-2024 11:00

  Centrum Obiegu Dokumentów zaprasza na szkolenie przypominające z zakresu rejestracji tradycyjnej korespondencji wychodzącej w systemie EZD.