Filters
total: 5868
displaying 1000 best results Help
Search results for: CHARACTERISTIC CLASSES
-
Causes of damage and methods of repairing floor made on polystyrene concrete
PublicationThe paper describes damages, tests and repair of the floor made on existing ceiling and expanded polystyrene concrete underlay. The floor was built on a reinforced concrete ceiling with an area of about 1050 m2. Significant damage in the form of cracks, detachments and unevenness was found in the floor. In order to determine the causes of damage, in situ tests and laboratory tests were carried out. It was found that the damage...
-
The Influence of Water and Mineral Oil on Pressure Losses in Hydraulic Motor
PublicationIn this paper, pressure losses in hydraulic motor supplied with water and mineral oil (two liquids that have significantly different viscosity and lubricating properties) are described and compared. The experimental tests were conducted using a hydraulic satellite motor that is dedicated to working with different liquids, including water. The methodology of measuring the pressure drop in internal channels of this motor is also...
-
Cross-Bonding of MV Cable Lines for Energy Losses Decrease
PublicationCurrently, almost all medium voltage cable lines (MV) operate with the return wires earthed at both ends of the cable. Such a way of operation causes that during normal states of operation as well as during disturbances, e.g. short-circuits, in the return wires induce currents whose values mainly depend on the currents flowing in the phase wires. These currents in normal operating states are a source of additional energy losses...
-
Research into the Movements of Surface Water Masses in the Basins Adjacent to the Port
PublicationThis paper presents the results of the practical and simulation research into determining the routes of movement of small objects moving together with surface water masses in basins adjacent to the port. The results of this research were referenced against the modelling of routes of small objects in port channel basins. The results of practical research concerning the movement of small objects in basins adjacent to the port were...
-
MEASUREMENT AND ANALYSIS OF TRANSMISSION LOSSES IN THE SUPPLY SYSTEM OF ELECTRIFIED TRANSPORT
PublicationThe issue of electric energy saving in public transport is currently becoming a key area of interest, a fact connected with both an increase in society’s environmental awareness and a rise in the prices of fuel and electricity. Electricity can be saved by reducing transmission losses in the supply system. The article presents a method of measurement and analysis of transmission losses in the supply system of electrified public transport...
-
The influence of water and mineral oil on volumetric losses in a hydraulic motor
PublicationIn this paper volumetric losses in hydraulic motor supplied with water and mineral oil (two liquids having significantly different viscosity and lubricating properties) are described and comparison. The experimental tests were conducted using an innovative hydraulic satellite motor, that is dedicated to work with different liquid, including water. The sources of leaks in this motor are characterized and described also. On this...
-
Microstructure of barium-vanadate glasses
Open Research DataThe structure of barium-vanadate glasses was measured by SEM and XRD techniques. Samples of the composition of xBaO-(100-x)V2O5 where x= 30, 40 and 45 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents: BaO (≥99.9%, P.P.H STANLAB Sp.J.) and V2O5 (≥99.9%, POCH) were thoroughly mixed in an agate mortar....
-
Topography of barium-vanadate glasses
Open Research DataThe topography of barium-vanadate glasses was measured. Samples of the composition of xBaO-(100-x)V2O5 where x= 30, 40 and 45 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents: BaO (≥99.9%, P.P.H STANLAB Sp.J.) and V2O5 (≥99.9%, POCH) were thoroughly mixed in an agate mortar. The melting was performed...
-
Curing characteristics of ground tire rubber modified by commercial additives
Open Research DataThe presented results show the influence of commercially available bitumen and transoctenamer rubber (TOR) on the curing behavior of GTR treated by a peroxide. Samples were prepared using a two-roll mill– all in the same manner. After 24 hours of aging at ambient conditions, they were submitted to the curing analysis via Rheometer Monsanto 100S. The...
-
Characteristics of selected Nodularia spumigena isolates from CCNP Collection
Open Research DataEN: This dataset includes information about Nodularia spumigena strains (Cyanobacteria) deposited in the Culture Collection of Northern Poland (CCNP), at the Division of Marine Biotechnology, Institute of Oceanography, University of Gdańsk, Poland. Presented data concern Nodularia spumigena strains, their (1) isolation and culture conditions, (2) taxonomic...
-
Comparative Genomics of Stenotrophomonas maltophilia and Stenotrophomonas rhizophila Revealed Characteristic Features of Both Species
Publication -
Characteristic of antioxidant activity of dry-cured pork loins inoculated with probiotic strains of LAB
Publication -
Aroma profile and lactic acid bacteria characteristic of traditional Slovak cheese “May bryndza”
Publication -
Oxidative stress and oxidative DNA damage is characteristic for mixed Alzheimer disease/vascular dementia
Publication -
Size-Controlled Synthesis of Pt Particles on TiO2 Surface: Physicochemical Characteristic and Photocatalytic Activity
PublicationDifferent TiO2 photocatalysts, i.e., commercial samples (ST‐01 and P25 with minority of rutile phase), nanotubes, well‐crystallized faceted particles of decahedral shape and mesoporous spheres, were used as supports for deposition of Pt nanoparticles (NPs). Size‐controlled Pt NPs embedded in TiO2 were successfully prepared by microemulsion and wet‐impregnation methods. Obtained photocatalysts were characterized using XRD, TEM,...
-
DMSO hydration redefined: Unraveling the hydrophobic hydration of solutes with a mixed hydrophilic–hydrophobic characteristic
PublicationHydrophobic hydration of solutes with a mixed hydrophilic--hydrophobic characteristics is still poorly understood. This is because both experimental and theoretical methods find it difficult to see the ice-like water structure around the nonpolar solute groups, unlike hydrogen bonds with the hydrophilic groups. In order to unravel this problem, we have investigated DMSO hydration by means of infrared spectroscopy and theoretical...
-
Green function diagonal for a class of heat equations
PublicationA construction of the heat kernel diagonal is considered as element of generalized zeta function theory, which gradient at the origin defines determinant of a differential operator in a technique for regularizing quadratic path integral. Some classes of explicit expressions of the Green function in the case of finite-gap potential coefficient of the heat equation are constructed. An algorithm and program for Mathematica are presented...
-
Study on Strategy in University Laboratory Class Teaching
PublicationLaboratory teaching is a critical way to ensure the effective input of techniques in engineering learning. Laboratory teaching not only contributes to improving course quality but also helps enrich comprehensive engineering application ability. However, there are some typical problems in current university laboratory teaching, such as rigid and isolated course design, outdated contents and materials, and not encouraging innovation...
-
Effect of the working liquid compressibility on the picture of volumetric and mechanical losses in a high pressure displacement pump used in a hydrostatic drive Part II Mechanical losses in a pump
PublicationŚciśliwość cieczy roboczej może znacząco zmienić wartości i proporcje współczynników strat objętościowych i mechanicznych w pompie wyporowej zastosowanej w układzie napędu hydrostatycznego. Wpływ ten jest szczególnie widoczny w trakcie pracy pod wysokim ciśnieniem a także wówczas, gdy występuje zapowietrzenie cieczy roboczej. W części II przedstawiono model matematyczny momentu strat mechanicznych w pompie oraz jego laboratoryjną...
-
COMPARISON OF NOISE EMISSION OF HCT AND CLASSIC VEHICLE COMBINATIONS FOR TIMBER TRANSPORTATION IN SWEDEN
PublicationBy means of a special simulation tool, the noise emission of a high-capacity heavy vehicle (11 axles) was compared to that of a classic heavy vehicle (a truck-dolly-semitrailer with 8 axles). The two cases are designated “Extended vehicle” versus “Classic vehicle” in this study, having total lengths of 34 and 25 m, respectively. The Classic vehicle represents the most common articulated heavy vehicle configuration for transport...
-
Luminescent GeO2–Pb–Bi2O3 glasses co-doped with Tb3+1 and Eu3+: Excitation energy transfer and color chromaticity
Publication -
Effect of composition on the thermal properties and structure of M-Al-Si-O-N glasses, M = Na, Mg, Ca
PublicationThe primary objective of this study is to explore the relationship between the composition, structure, and thermal characteristics of M-Al-Si-O-N glasses, with M representing sodium (Na), magnesium (Mg), or calcium (Ca). The glasses were prepared by melting in a quartz crucible at 1650 °C and AlN precursor (powder) was utilized as a nitrogen source. The measured thermal properties studied were glass transition temperature (Tg),...
-
Elucidating photoluminescent properties of Eu‐doped Ca–Al–Si–O(–N) glasses and the local structures of Eu ions
PublicationEuropium (Eu) ion–doped luminescent materials have attracted considerable attention for their numerous optical applications. Eu-doped Ca–Al–Si–O(–N) glasses were synthesized from a mixture of oxynitride glasses and Eu2O3 powder using a standard melt-quenching technique in a radiofrequency furnace. The source Eu trivalent ions primarily changed to Eu2+ during melting, and the ratio of Eu2+ ions increased with an increase in Eu content...
-
Nanosilver-loaded PMMA bone cement doped with different bioactive glasses – evaluation of cytocompatibility, antibacterial activity, and mechanical properties
PublicationNanosilver-loaded PMMA bone cement (BC-AgNp) is a novel cement developed as a replacement for conventional cements. Despite favorable properties and antibacterial activity, BC-AgNp still lacks biodegradability and bioactivity. Hence, we investigated the doping with bioactive glasses (BGs) to create a new bioactive BC characterized by time-varying porosity and gradual release of nanosilver. The BC Cemex was used as the base material...
-
The possibilities of using of the engine multidimensional charakteristics in fuel consumption prediction
PublicationDokument przedstawia możliwości prognozowania zużycia paliwa z wykorzystaniem wielowymiarowej charakterystyki zużycia silnika. Zdefiniowane zostały charakterystyki wielowymiarowe silnika.
-
Chracteristics of anaerobic ammonium oxidation initated by anaerobic granular sludge
PublicationTwo different mixed sludge, anaerobic granular sludge(R1) and anaerobic granular sludge with mature anaerobic ammonium oxidation (ANAMMOX) sludge (R2 )were used as the inocula in two up-flow reactors to enrich anaerobic ammonia-oxidizing bacteria (AnAOB),respectively.The total nitrogen removal rate of R1 reached 74% in 99 days, while R2 remained above 70% in only 48 days.The content of extracellular polymeric substance (EPS) in...
-
Spectroelectrochemical characteristics of poly(3,4-ethylenedioxythiophene) / iron hexacyanoferrate film-modified electrodes
PublicationPraca dotyczy pomiarów spektroelektrochemicznych materiałów hybrydowych złożonych z polimeru elektroaktywnego poli(3,4-etylenodioksytiofenu) i Błękitu Pruskiego. Dla porównania badano również filmy polimerowe z wybranymi przeciwjonami: heksacyjanożelazowym (Fe(CN)63-/4-), chlorkowym (Cl-) i polistyrenosulfonowym (PSS-). Materiały w postaci cienkich filmów otrzymano na elektrodzie szklanej pokrytej tlenkiem indowo-cynowym. Widma...
-
Characteristics, Chemical Modification Processes as well as the Application of Silica and its Modified Forms
PublicationThe variety of chemical modifications of the surface of silica and its modified forms cause thesematerials to find a consistently wider scope of application. In the publication, the characteristicsof silica, silica gel, aerogel and xerogel are presented. The obtainment, application and propertiesof these materials are discussed. Methods of chemical modifications of surface structures withthe use of different chemical compounds...
-
Structural Investigations and Determination of Current and Voltage Characteristics in Htsc 2G SF12050 Tapes
Publication -
Comprehensive Thermal Characteristics of Different Cultivars of Flaxseed Oil (Linum usittatissimum L.)
Publication -
Characteristics of calcium carbonate microparticles fabricated by the emulsion-emulsion technique in a large scale
PublicationReaktor zbudowany z dwóch współosiowych kolumn z mieszaniem w kolumnie wewnętrznej zastosowano do strącania cząstek węglanu wapnia metodą mieszania dwóch emulsji woda w oleju zawierających chlorek wapnia oraz węglan sodu jako reagenty. Zbadano wpływ częstości obrotów mieszadła, stężenia reagentów oraz czasu starzenia na wielkość cząstek stałych.
-
Altered circadian genes expression in breast cancer tissue according to the clinical characteristics
Publication -
The Influence of Selected Plant Essential Oils on Morphological and Physiological Characteristics in Pseudomonas Orientalis
Publication -
Differentiation of Nutritional Risk among Polish Seniors Based on Selected Lifestyle Characteristics
Publication -
Prevalence and clinical characteristics of patients with true resistant hypertension in central and Eastern Europe
Publication -
Effect of nanosilica on characteristics of carbonizates of phenol-formaldehyde resin – Fe(acac)3
Publication -
Rheological and aging characteristics of the recycled asphalt binders with different rejuvenator incorporation methods
Publication -
The effects of graphical interface design characteristics on human–computer interaction task efficiency
Publication -
Surface Characteristics of Plasma Treated and Titanium Nitride (TiN) Deposited Aluminum Alloy
Publication -
Characteristics of Particles Emitted from Waste Fires—A Construction Materials Case Study
Publication -
The Characteristics of New SSB Proteins from Metagenomic Libraries and Their Use in Biotech Applications
Publication -
Modification of current-voltage characteristics of planar organic systems by nm-thick interlayer
PublicationEffect of nm-thick interlayer of copper phthalocyanine (CuPc) or perylene dye (MePTCDI) on current-voltage characteristics of planar organic systems is discussed in the work. The MePTCDI layer strongly limits injection of holes from ITO into CuPc, while CuPc limits injection of electrons from ITO into MePTCDI. In the systems with CuPc/MePTCDI heterojunction an explicit photovoltaic effect occurs.
-
Characteristics of volatile organic compounds emission profiles from hot road bitumens
PublicationA procedure for the investigation and comparison of volatile organic compounds (VOCs) emission profiles to the atmosphere from road bitumens with various degrees of oxidation is proposed. The procedure makes use of headspace analysis and gas chromatography with universal as well as selective detection, including gas chromatography–mass spectrometry (GC–MS). The studies revealed that so-called vacuum residue, which is the main component...
-
Beta-Galactosidases of Pseudoalteromonas sp. – Characteristics and application for lactose hydrolysis and galactopyranosides synthesis
PublicationBeta-galactosidase [EC 3.2.1.23] is an enzyme that catalyzes the hydrolysis of O-glycosidic linkages in galactosides. It has biotechnological applications in the dairy industry for the production of milk with a low content of lactose and galactooligosacharides for use in healthy food. The transgalactosylation activity of beta-galactosidase can be used in the synthesis of alkyl galactopyranosides. Due to the fact that conditions of...
-
Heat transfer enhancement, flow visualization and friction characteristics in rib-roughened channels
PublicationW pracy przedstawiono wyniki badań eksperymentalnych związanych z intensyfikacją wymiany ciepła w kanałach wyposażonych w żebra, które poprawiają warunki przejmowania ciepła od ścianki do przepływającego medium. W badaniach wykorzystano system PIV oraz termografię ciekłokrystaliczną.
-
Wear and corrosion characteristics of the layers type (mn-p) formed on aluminium alloys
Publicationopisano multipleksową metodę wytwarzania warstw zawierających mangan i fosfor (mn-p) na stopach aluminium. przedstawiono wyniki badań mikrostruktury, właściwości tribologicznych i korozyjnych tych warstw. stwierdzono obecność tlenku manganu i fosforku manganu w wytworzonych warstwach oraz ich wysoką twardość, rzędu 1272 hv0,02. warstwy typu (mn-p) zmniejszają podatność stopu alsi13mg1cuni na korozję w 0,01 mh2so4.
-
Running characteristics of aerodynamic bearing with self-lifting capability at low rotational speed
PublicationAn aerodynamic journal bearing that is capable of self-generating squeeze-film pressure is presented and its dynamic characteristics investigated numerically and experimentally. A numerical method based on a time marching static model was applied to assess the orbit trajectory path of the rotor upon a perturbation. Experimental results were obtained to validate the effect of the self- generated squeeze-film pressure on the stability...
-
Parametric method for determination of motion characteristics of underwater vehicles, applicable in preliminary designing.
Publicationartykuł zawiera opis metody wstępnego projektowania autonomicznych pojazdów podwodnych (auv), przydatnej szczególnie w przypadku, gdy w założeniach projektowych stawiane są wymogi dotyczące parametrów kinematyczno-dynamicznych ruchu pojazdu. koncepcja metody zasadza się na równaniach dynamiki opisujących ruch płaski pojazdu w kierunku poziomym i pionowym, wywołanych odpowiednio napędem śrubowym lub balastem wodnym. równania ruchu...
-
Impact of sea wave stochastic characteristics on ship propulsion control system design.
PublicationWybrano do rozważań (symulacji komputerowej) 8 rejonów morskich w 4 porach roku. Określono w nich gęstość widmową amplitudy fali morskiej. Założono, upraszczająco, regulator typu PID. Dla wybranego typu statku wykonane badania symulacyjne odnoszą się do wybranych rejonów mórz i pór roku. Okazuje się, że dobierając zarówno współczynnik wzmocnienia regulatora jak i stałą całkowania, można minimalizować wartości wariancji, na przykład,...
-
Effects of loading pattern and lubricant pressure influence on bearing alloy fatigue characteristics
PublicationOpisano wyniki testów zmęczeniowych przeprowadzonych dla stopu łożyskowego AlSn (11,3 Cu 1,2) osadzonego na taśmie stalowej. Doświadczalnie określono wartości obciążeń niszczących dla różnych warunków obciążenia: dla obciążeń zginających wahadłowych, dla obciążeń zginających wahadłowych przy równoczesnym działaniu słabego lub zmiennego ciśnienia w komorze olejowej.